Please help with TV and home theater system for very large basement room....

I'm looking to get my boyfriend either a TV or home theater system for the basement. I know he eventually wants a 3d TV. Right now he has a set up where he has 2 tv's so he can play video games and watch sports.
The basement that the tv and home theater system will be in is large (I'd estimate at least 15 ft x 30 ft...maybe more) so I want to make sure the home theater system will be enough for the room. We live in a ranch so basically the basement is almost the size of the house with some of it being storage.
I've started to look at products online but there are so many and technology isn't really my thing.
If anyone could help with recommendations for the home theater system and/or the tv I'd appreciate it!
Thanks so so sooo much!!!!

What will he be using the HT system for? Just watching sports or skipping the movie theater and watching them at home. If you plan to watch them at home your going to be on a tight budget with the home theater system but it is possible. Spend good money on the sub, that is one speaker you don't want to skimp out on. With such a big space you have a lot of room to fill and the cheap subs aren't going to cut it. You will probably need two subs as it is. The speakers I recommend on a tight budget Polk or Klipsch. My list includes a Denon receiver as I am a Denon fan but Yamaha, Onkyo, or Pioneer will suffice.
Here is a Option 1 will run you about 1700 with just one sub. You could always go up a model on each speaker if you feel the one sub is enough. I like an explosion sounding like it happened in front of me so that is why I mention 2 subs.
http://www.bestbuy.com/site/Denon+-+630W+7.1-Ch.+3D+Pass+Through+A/V+Home+Theater+Receiver/9894577.p...
http://www.bestbuy.com/site/Polk+Audio+-+Dual+5-1/4%22+2-Way+Floor+Speakers+(Each)+-+Black/8825453.p... speakers&cp=1&lp=12
http://www.bestbuy.com/site/Polk+Audio+-+5-1/4%22+Bookshelf+Speakers+(Pair)+-+Black/8825444.p?id=120... speakers&cp=1&lp=2
http://www.bestbuy.com/site/Polk+Audio+-+5-1/4%22+Center-Channel+Speaker+-+Black/8826149.p?id=120735... speakers&cp=1&lp=28
http://www.bestbuy.com/site/Speakers/Subwoofer-Speakers/abcat0205008.c?id=abcat0205008&&initialize=f...
Option 2 will cost $1400 before a subwoofer
http://www.bestbuy.com/site/Denon+-+630W+7.1-Ch.+3D+Pass+Through+A/V+Home+Theater+Receiver/9894577.p...
http://www.bestbuy.com/site/Mirage+-+OS%26%23179%3B-CC+Ompipolar+3-Way+Center-Channel+Speaker+-+Blac... speaker&cp=1&lp=11
and 4 of the below speaker
http://www.bestbuy.com/site/Mirage+-+OS%26%23179%3B-SAT+4-1/2%22+2-Way+Satellite+Speaker+(Each)+-+Hi... speaker&cp=1&lp=15

Similar Messages

Help on purchasing a Home Theater System...

Hi everyone,
I just bought a new HDTV and I am now looking into getting a good Home Theater System, since as I'm sure you all know, the speakers on my TV are pretty pathetic.
But in all honestly, I really don't know much at all about speakers and home theater systems, so that's why I'm here.
I hear that most home theater systems come with DVD and Bluray players, but I don't need either of those, since my ps3 and 360 give me 2 DVD players and a Bluray player already.
I am really looking to spend less than 400 bucks, or around that area if possible.
I also have one question: My HDTV only has 2 HDMI ports and one Component port and since I am using both of those (HDMI is being used for the cable and ps3 and component is used for my 360) I am wondering if there is some other way of connecting the Home Theater System?
Thanks in advance for all your help.
Solved!
Go to Solution.

paulmohr wrote:
Ok after looking at the manual for that reciever this is what I come up with.
One HDMI cable running from your PS3 to the reciever (BD in would be my choice)
One HDMI cable running from your Cable box to the receiver (dvd in would by my choice)
Now for you Xbox 360 you said you have the component cables for it, from what I can tell you can also get an HDMI connector as well. What you choose is up to you but this is how it would work.
Xbox with component cables:
Since the receiver doesn't have component swtiching you would have to hook the xbox up to your tv with the component cables ( the way it is now).
Then run an optical audio cable from the xbox to the receiver SAT optical in.
If you get the HDMI cable most likely you would just run the HDMI cable from the Xbox to the receiver like the other components. If you went this route I would hook the xbox to the dvd hdmi in and the cable box to the SAT hdmi in though. Honestly it doesn't matter but it just might be less confusing that way.
Then you would need on optical cable running from the TV out to the TV in on the reciever. If you never watch regular tv you don't need this since the sound will come from your cable box anyway. But if you also have the tv hooked up to an antenna or something this will send the sound to the receiver.
And one HDMI cable running from the Receiver out to on the HDMI inputs on the tv. This is what will carry all of the signals going into your receiver to your tv.
And then the speakers connections which should be described in the instructions for the receiver. Just make sure the polarity is right when you connect them.
This configuration will let you control most or all of the components through the receiver since it switches most of them. Just choose the correct input and the tv will display it.
Okay, so according to that, I would need 4 HDMI cables to my HDTV, which would be impossible.... Unfortunately, my new HDTV only has 2 HDMI porsts, so is there a way to get around that issue? If I use HDMI for the ps3 and HD cable box, then is there a way to hook everything else up (including the reciever) without HDMI?
Thanks in advance.

Need Help choosing a new tv and home theater system.

I can never really keep up with all the new stuff coming out but i am not really looking for anything too fancy just simple. I looking for something around 50" and a blue ray home theater system. My budget is roughly around $2000 or so. the less i spend the better hahhahaha. anyways the only thing i will be hooking up to the tv is the new home theater system, cable and Xbox 360. Any suggestions?

All the 50" tvs are plasma, so I would recommend:
Model: PN50C680G5F | SKU: 120138 Model: YHT-493BL | SKU: 987545 Model: 114011-00 | SKU: 9343356 Model: 114011-00 | SKU: 9343356 Model: BD-C5900 | SKU: 1012858
That's a Samsung 50" 3D Plasma, Blu-ray player, Yamaha Home Theater system, and your 2 HDMI cables. You'll need another HDMI cable for Xbox 360 if you don't have one already to connect to the receiver.

How to connect Apple TV to projector and home theater system?

I have an Optoma HD20 projector that I have a long hdmi cable connected to and plugged that into my Apple TV. I also have an older home theater system that does not have an optical audio input. So I bought an adapter to go from optical audio to RCA cables. When I get it all plugged in and turned on I can't even get the video on my screen. What am I missing?
This is the adapter...
http://www.amazon.com/gp/aw/d/B005F20756

Darn. Ok. Then do you have any suggestions for other options to connect the two? My projector is mounted to the middle of the ceiling with a whole for the wires that go along inside the ceiling to the other side of the room.

How to set up connection for directv receiver, TV, and home theater system?

Can some one please show me the CORRECT way to connect my Directv receiver (it has no HDMI), Panasonic Viera HDTV (has 3 HDMIs) and my Samsung home theater HT-Z510 (has 1 HDMI)? The second question is with the set up that you advise, can I play the TV sound through my home theater speakers? and How do I do that each time I want to listen the TV sound through my home theater speakers? I am new and confused about all this so please provide or explain step by step please. Thanks in advance.

Making sense of your connections on a message board is never easy. Hopefully you can piece this information together.
Direct TV box to Panasonic TV using S-video cable....assuming it's standard definition. Component video if the box is HD. Run standard stereo RCA cables to the appropriate input for sound threw the TV speakers.
Your Panasonic TV will have a set of stereo(left/white,right/red) outputs. Run cable from that output into the same inputs on the Samsung surround unit. Use the sound units effects to acheive simulated surround. This is assuming you have no digital outputs on your box. If you do, you'll be able to get 5.1 when available using a digital connection.
Good luck.
Disclosure: Former BBY employee.

Please help with importing and using imovie and idvd

Hi,
Please forgive my lack of knowledge. I previously had a mini dv camcorder that was so easy to use with imovie hd. Now that I have switched to an HD Usb 2.0 camcorder that has built in 16gb memory and memory cards, I have had such a great deal of trouble. I really hope you can help and point me in the right directions.
Importing movies are fine, but they take so long! Currently, when I import a movie, I set the camcorder to PC mode and import through imovie. But the camcorder stays on, and I'm not sure if this is the best way or healthiest for the camcorder. Do you have a better/faster way to import movies? Is there a way to drag the video from the memory onto the computer, and then from there import the movie? I think at least I wouldn't have to leave the camcorder on.
Also, one major issue I have is that each movie is broken down into 100 or so clips. I coach basketball, and videotape the games. When there is stoppage, I pause the camcorder. I guess that creates so many clips, so that when the film is imported, there are over 100 clips for the entire movie. Is there a way of making that just 1 entire movie/clip?
Once I have imported the entire movie, which is 100+ clips, I want to simply create a dvd of the game. I know I have to share it, but do you have a better suggestion as to how I should handle this?
In the past, all I did was import the mini dv movie into imovie HD, share into idvd, and then that was it, dvd made. This process had become so time consuming.
Please help!

Yes, I recognized there would be a slight pause between clips - but after all - you paused the camera at those points.
Putting them all in sequence in iMovie and then encoding in iDVD will take a lot of time.
An old favorite saying of mine is "not every job worth doing, is worth doing well'. The meaning being sometimes 95% is good enough so you can go on to the next job.
How much work do you want to put into each DVD? Can you live with the slight pauses?
would you suggest using a memory card?
Yes, but 16GB cards aren't cheap (yet).

Please help with audio and video not syncing.

I'm using Encore 3, and have already authored a DVD a month ago without a glitch. The following are the same steps I used, but this time around, the video and audio in Encore are not syncing.
Here's what I've done.
1) I export my Final Cut projects to .mov using the following settings (Share > Master File).
Format: Video and Audio
Video codec: H.264
Resolution: 1920x1080
Audio file format: Quicktime Movie (AAC)
Include chapter markers: Unchecked
Roles as: Quicktime Movie
2) I run the .mov file in Compressor using the "Disc Burning" preset.
3) I then import the .ac3 and .m2v files that Compressor created into Encore.
4) In Encore, I select both files and go to New > Timeline.
In the Timeline window, the durations on both are the same. But I don't understand why the audio and video are not synced when I preview or when I burn a test DVD. The audio comes in just a tad late.
Video Clip:
Source In: 00;00;00;00
Duration: 00;02;33;29
In-Point: 00;00;00;00
Out-Point: 00;02;33;29
Audio Clip:
Source In: 00;00;00;00
Duration: 00;02;34;00
In-Point: 00;00;00;00
Out-Point: 00;02;34;00
What's puzzling is that two of the 10 videos I've import to Encore are synced perfectly -- same export settings from FCP, same settings Compressor.
Please help.
Thanks!
Mark

Hi Mark.
Do you have any situations where there is more than one video file in a timeline?
Secondly - why are you using H264 HD files for a DVD? This is using lossy compression to make the H264, which is in turn then scaled & even further bitrate reduced for M2V.
I would give it a try rendering an SD video file for use in Encore - not the H264 - and starting out with Dolby Digital or LPCM audio, not AAC.
As with all DVD authoring programs, Encore works best with DVD compliant assets - which you are most definitely using - but I still think you are over-complicating things by using H264/AAC at all.
Eliminating this may help.

Please Please help with JavaScript and Actions

Hello!
Is there a way to perform a saved Action from the Action Pallette using a JavaScript script? I know there is a way to do it with Visual Basic.
Is there a way to run a Visual Basic script from a JavaScript script?(which could be a potential workaround if JavaScript CANNOT call on an Action)
Is there a way to call on a JavaScript from an Action?
Here's specific information on my problem:
I am using Illustrator CS2 on a PC
I have written all of the JavaScript scripts that I need to perform various layer selection procedures and they all work perfectly. I have placed them in the Presets > Scripts folder so that they appear in my file menu.
I wrote a very long action that called on these scripts (using Insert Menu Item > then selecting the script by going File > Scripts) sequentially and did some selecting and copy-pasting and applying graphic styles in between scripts. The Action worked PERFECTLY and ran all the scripts I needed to an automated a process that usually takes me an hour in less than five minutes!
I saved the actions and saved the file.
After closing Illustrator all of the lines of the action that called on scripts disappeared! It seems this is a known bug...I currently know of no workaround.
Can anyone help with any of the following things:
1. Getting actions to SAVE the commands to run javascripts
2. Writing a JavaScript that runs an Illustrator Action
3. Writing a JavaScript that runs a Visual Basic script that runs an Illustrator Action.
I spent three days learning the basics of JavaScript (mostly by trial and error) and successfully wrote all the scripts I needed...I was overjoyed! But now that I've closed illustrator my actions to run said scripts do not work. PLEASE ADVISE!!!
Thanks in advance,
Matthew

try next
1)if possible split JS-code into 2 parts (before/after action)
2)make vbs script with contents
Set appRef = CreateObject("Illustrator.Application.3")
appRef.DoJavaScriptFile("C:\my1.js")
appRef.DoScript(Action As String, From As String)
'add wait while ActionIsRunning
appRef.DoJavaScriptFile("C:\my2.js")
3) run vbs (File > Scripts or double-click).

Please Help with Install of BSD Sub System

I installed 10.2.8 yesterday. I spent today customizing and adding apps. I now realize I should have installed the extra sub system. I went to the 2nd install disc and it installed some extra apps, but not really what I want. Is there anyway I can install it through the fist disc without interfering with what I've already installed?
I might have some terms wrong here. Please bear with me. I'll answer any questions to clarify.
Thanks,
Kirk

Niel
You are the man! I found it on the 1st install disc under Optional Installs. Thank you!

Please help with ovals and arrays

i'm creating an array that will be used to create a number of bubbles (simple ovals) on the screen. I can create 1 bubble/oval with no problem, but when i use the array to create multiple ones, everything craches and i get a big number of errors.
Can someone please help or point me in the right direction?
thank you
Marko
p.s. the code that i'm using at the moment is listed below. * to draw 1 oval, array not used
import java.awt.Color;
import java.awt.Graphics;
import javax.swing.JPanel;
import javax.swing.JFrame;
public class Bubbles extends JPanel
    int array[] = {1,2,3,4,5};
    public void paintComponent(Graphics g)
        super.paintComponent(g);
        this.setBackground(Color.WHITE);
        for(int x = 0; x<5; x++)
        g.setColor(Color.BLUE);
        g.drawOval((array.(30,30,100,100));
public static void main( String args[])
JFrame frame = new JFrame();
frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
Bubbles b = new Bubbles();
b.setBackground(Color.WHITE);
frame.getContentPane().add(b);
frame.setSize(400, 400);
frame.setVisible(true);

Finally, this plug-in is ready for beta testing on www.amazoncanvas.com
Thank you all who have participated in this program.

Please Help with Forms and SQL Plus Connection Issues in XE

I am not able to connect with the Forms Builder or SQL Plus with the following errors:
When attempting to connect with the supplied website.edu:port/orcl
ORA-06401: NETCMN: invalid driver designator
When leaving the connection information blank and using my local login and password
for my copy of Oracle XE
ORA-12560: TNS:protocol adapter error
Based on some reading, I set the TNS_ADMIN user environmental variable, trying each of the tnsnames.ora locations but I'm still receiving the same errors
Location 1: DevSuiteHome\...\tnsnames.ora
Location 2: oraclexe\...\tnsnames.ora

Thanks, Vikas!
But I did a search for 6iServer.conf and did NOT locate any such file
Please help
TIA
SHANKAR
Shankar,
It would have helped if you had indicated what is the full version of 9iAS that you have installed. By default the portnumber that is used is 7778.
As per the entries, they should have already been made in the config files. But check that the 6iServer.Conf file and it should contain the entries that you are being told to update. If not, then add the entries in the 6iServer.conf file and that is all you need.
HTH.
Vikash

Please help with download and installation

Hi,
I am trying to download jdk1.4etc to Solaris Sparc. I tried downloading several times, all the times I get corrupt files. How and from where do I install JDK2 on Solaris. i am also in search of a good text editor like textpad for Solaris. Can anyone give me suggestions? Also, I need it immediately for my term assignments.
Please Help!

I am also having this problem. I have tried both the
tar.Z and sh files. I have run the .sh as myself and
as root. Here's what I see with the .sh installer:
Do you agree to the above license terms? [yes or no]
yes
Unpacking...
Checksumming...
1
The download file appears to be corrupted. Please
refer to the Troubleshooting section of the Installation
Instructions on the download page for more information.
Please do not attempt to install this archive file.
I am anxious to find a solution.I am having the same problem with both a download, j2sdk-1.4.0-linux-i386-rpm.bin, and Sun ONE cdrom, /disc3/j2se/1.4/j2sdk-1_4_0-linux-i386.bin, versions. I sincerely doubt that both are corrupted, at least I hope not. I'm attempting to set up the sdk under RedHat 7.2 in /usr/java. Have tried as both a user and as root - no joy! I would greatly appreciate any suggestions or help.

Please help with Firewall and/or other Settings to Chat (MSN Messenger).

I've tried to chat on all (I think) the messenger programs available for Mac that use a hotmail account or .net passport - Adium, Fire, Mercury (current) and MSN itself - and I have the same problem with all of them: I keep getting cut off/disconnected from MSN! No problems with Yahoo messenger or Yahoo ID (although it can be a bit slow sometimes), just with .net passport account.
I'm pretty sure it's got something to do with Firewall and/or related settings, but after months of trying to fix it, I'm about to give up... please help!
Currently the following Firewall ports are all open:
6891 – 6900
1863
80
1080
5060, 9000, 9010 (UDP – typed like that)
including:
Personal File Sharing
Windows Sharing
Remote Login - SSH
and Printer Sharing.
In my most recent disconnected conversation, Mercury logged a "socket fired exception" error.
I'm on a broadband/adsl connection, shared with hubby's pc through ethernet (and he never gets disconnected from msn, btw).
ANY suggestions would be welcome, but apart from the above, please tell me how/where to find what you tell me to look at or for, because I'm a new Mac user (six months), and on top of that I'm blonde
Many Thanks!
Mac Mini (PowerMac10,1) Mac OS X (10.4.3) 1.42 GHz PowerPC G4 with 1 GB DDR SDRAM

Update:
Someone very kindly pointed out that my Firewall is actually Off (probably because I omitted to click on the Start button)... I did say I'm blonde
So now I'm really stumped... anybody got any ideas? Please?

Please Help with Deleting and Putting in Music

Hi. I have a Nokia5300 Express Music. I want to add music on it but i don't know how. I have windows media player the PC suite thing and everything. But I don't know how to delete music or import music please help. This is very different from the ways i do it from the Ipod ...
HELP HELP HELP

wait wait guys please help me delete my music i really want to delete ALL my music and put in NEW music i hate the windows media player iuno how to unsync it and delete it T_T

Please help with jsp and database!!

Hello,
i first created a jsp page and printed out the parameters of a user's username when they logged in. example, "Welcome user" and it worked fine...
i inserted a database into my site that validates the username and password, and ever since i did that in dreamweaver, when a user logs in sucessfully, it returns the jsp page like its supposed to, only that it says "Welcome null" instead of "Welcome John." pretty strange, huh!? can anyone please help? thanks!
here is the important part of the code to Login.jsp, and LoginSuccess.jsp: <%@ page contentType="text/html; charset=iso-8859-1" language="java" import="java.sql.*" %>
<%@ include file="Connections/Login.jsp" %>
<%
// *** Validate request to log in to this site.
String MM_LoginAction = request.getRequestURI();
if (request.getQueryString() != null && request.getQueryString().length() > 0) MM_LoginAction += "?" + request.getQueryString();
String MM_valUsername=request.getParameter("Username");
if (MM_valUsername != null) {
String MM_fldUserAuthorization="";
String MM_redirectLoginSuccess="LoginSuccess.jsp";
String MM_redirectLoginFailed="LoginFailure.jsp";
String MM_redirectLogin=MM_redirectLoginFailed;
Driver MM_driverUser = (Driver)Class.forName(MM_Login_DRIVER).newInstance();
Connection MM_connUser = DriverManager.getConnection(MM_Login_STRING,MM_Login_USERNAME,MM_Login_PASSWORD);
String MM_pSQL = "SELECT UserName, Password";
if (!MM_fldUserAuthorization.equals("")) MM_pSQL += "," + MM_fldUserAuthorization;
MM_pSQL += " FROM MemberInformation WHERE UserName=\'" + MM_valUsername.replace('\'', ' ') + "\' AND Password=\'" + request.getParameter("Password").toString().replace('\'', ' ') + "\'";
PreparedStatement MM_statementUser = MM_connUser.prepareStatement(MM_pSQL);
ResultSet MM_rsUser = MM_statementUser.executeQuery();
boolean MM_rsUser_isNotEmpty = MM_rsUser.next();
if (MM_rsUser_isNotEmpty) {
    // username and password match - this is a valid user
    session.putValue("MM_Username", MM_valUsername);
    if (!MM_fldUserAuthorization.equals("")) {
      session.putValue("MM_UserAuthorization", MM_rsUser.getString(MM_fldUserAuthorization).trim());
    } else {
      session.putValue("MM_UserAuthorization", "");
    if ((request.getParameter("accessdenied") != null) && false) {
      MM_redirectLoginSuccess = request.getParameter("accessdenied");
    MM_redirectLogin=MM_redirectLoginSuccess;
MM_rsUser.close();
MM_connUser.close();
response.sendRedirect(response.encodeRedirectURL(MM_redirectLogin));
return;
%>
      <form action="<%=MM_LoginAction%>" method="get" name="Login" id="Login">
        <table width="55%" border="0">
          <tr>
            <td width="41%">Username </td>
            <td width="59%"><input name="Username" type="text" id="Username" value="" size="25" maxlength="10"></td>
          </tr>
          <tr>
            <td>Password </td>
            <td><input name="Password" type="password" id="Password" value="" size="25" maxlength="10"></td>
          </tr>
          <tr>
            <td> </td>
            <td><input type="submit" name="Submit" value="Submit"></td>
          </tr>
        </table>
      </form>And LoginSuccess.jsp where i want it to print out the "Welcome username
         <%String Name=request.getParameter("Username");
     out.println ("Welcome ");
     out.println (Name); %>

<%@ page contentType="text/html; charset=iso-8859-1"
language="java" import="java.sql.*" %>
<%@ include file="Connections/Login.jsp" %>
<%
// *** Validate request to log in to this site.
String MM_LoginAction = request.getRequestURI();
if (request.getQueryString() != null &&
request.getQueryString().length() > 0) MM_LoginAction
+= "?" + request.getQueryString();
String
MM_valUsername=request.getParameter("Username");
if (MM_valUsername != null) {
String MM_fldUserAuthorization="";
String MM_redirectLoginSuccess="LoginSuccess.jsp";
String MM_redirectLoginFailed="LoginFailure.jsp";
String MM_redirectLogin=MM_redirectLoginFailed;
Driver MM_driverUser =
=
(Driver)Class.forName(MM_Login_DRIVER).newInstance();
Connection MM_connUser =
=
DriverManager.getConnection(MM_Login_STRING,MM_Login_US
RNAME,MM_Login_PASSWORD);
String MM_pSQL = "SELECT UserName, Password";
if (!MM_fldUserAuthorization.equals("")) MM_pSQL +=
= "," + MM_fldUserAuthorization;
MM_pSQL += " FROM MemberInformation WHERE
E UserName=\'" + MM_valUsername.replace('\'', ' ') +
"\' AND Password=\'" +
request.getParameter("Password").toString().replace('\'
, ' ') + "\'";
PreparedStatement MM_statementUser =
= MM_connUser.prepareStatement(MM_pSQL);
ResultSet MM_rsUser =
= MM_statementUser.executeQuery();
boolean MM_rsUser_isNotEmpty = MM_rsUser.next();
if (MM_rsUser_isNotEmpty) {
// username and password match - this is a valid
lid user
session.putValue("MM_Username", MM_valUsername);
if (!MM_fldUserAuthorization.equals("")) {
session.putValue("MM_UserAuthorization",
ion",
MM_rsUser.getString(MM_fldUserAuthorization).trim());
} else {
session.putValue("MM_UserAuthorization", "");
if ((request.getParameter("accessdenied") != null)
ll) && false) {
MM_redirectLoginSuccess =
ess = request.getParameter("accessdenied");
MM_redirectLogin=MM_redirectLoginSuccess;
MM_rsUser.close();
MM_connUser.close();
response.sendRedirect(response.encodeRedirectURL(MM_re
irectLogin));
return;
%>
<form action="<%=MM_LoginAction%>" method="get"
"get" name="Login" id="Login">
<table width="55%" border="0">
<tr>
<td width="41%">Username </td>
<td width="59%"><input name="Username"
="Username" type="text" id="Username" value=""
size="25" maxlength="10"></td>
</tr>
<tr>
<td>Password </td>
<td><input name="Password" type="password"
="password" id="Password" value="" size="25"
maxlength="10"></td>
</tr>
<tr>
<td>�</td>
<td><input type="submit" name="Submit"
me="Submit" value="Submit"></td>
</tr>
</table>
</form>
And LoginSuccess.jsp where i want it to print out the
"Welcome username
         <%String Name=request.getParameter("Username");
     out.println ("Welcome ");
     out.println (Name); %>When the page is rediredted u r not passing the user name in the query string,so it is not availble in the query string for LoginSuccess page
Since u have added user in session user this
<%String Name=(String)session.getValue("MM_Username") ;%>
<%     out.println ("Welcome ");
<%      out.println (Name); %>

Please help with TV and home theater system for very large basement room....

Similar Messages

Maybe you are looking for