Please help with update for ios 8.1.3

Some one PLEASE HELP ME!!!  I just updated my I phone 4s to ios 8.1.3 it was taking a long time then they finally updated and had the Hello screen after that I saw my photos then they would just delete it right in front of me I also lost some of my contacts but my notes still here can someone please help me find my photos are very important to me they have pictures of my relatives who passed away please help!!!

After 4+ months of dealing with this data usage and battery drain problem that included 3 data captures of my wife's iMac, the trigger for us regarding the problems syncing with iCloud, and 5 hours of logs off my iPhone 6 to be analyzed by Apple engineers that included times my wife's computer was both on and off to demonstrate the difference in data usage and battery drain under those conditions, I can say with very reasonable certainty that the iOS 8.3 and corresponding Mac OS 10.10.3 update has solved the problem. 
We have now been running for about 2 weeks and data usage with the iCloud Servers attempting to sync has dropped from a rate of 31 GBs to under 15 MBs per month.  Yes, you read it right.  We were burning 2000 times as much data doing absolutely nothing important on both of our phones, a 5s and a 6.  Just imagine what that does to battery life!  The 5s would last about 5 hours and the 6 was dead in less than 14.
The distasteful aspect of this process was how the engineers were quietly fixing the problem at the same time sending messages to my contact person within Apple that were dismissive in nature in the face of indisputable unreasonable results. I must say, this experience with the multiple times the engineers' responses were inappropriate put a little tarnish on the old Apple shine of the ‘It just works’ mantra. This was my first experience in 34 years that caused me to stop recommending Apple products without reservations and with a disclaimer.
Since the update solved the problem, then I can only conclude that there was a logic bug regarding the reaction within the process to the incoming data that was corrected.  There was noting short of logging out of iCloud that circumvented the problem for us, Gator5000e and probably many others noted on other threads.  I am not trying to imply that this is the cause of everyones battery use problem, but it is reasonable that it was a cause for many.

Similar Messages

  • Why I can't update my ios to ios6? It always display that..Error in updating..I am using ipad3. Please help me update my ios. Looking forward for your kind support and cooperation. Thank you.

    Why I can't update my ios to ios6? It always display that..Error in updating..I am using ipad3. Please help me update my ios. Looking forward for your kind support and cooperation. Thank you.

    Why I can't update my ios to ios6? It always display that..Error in updating..I am using ipad3. Please help me update my ios. Looking forward for your kind support and cooperation. Thank you.

  • Help with updates for CS6

    I need help installing latest updates for CS6.  I have Win 7 and have tried updating from the Help - Updates menu.  The error is:  U43M1D207.

    Thanks for your response.  I am in the United States in So. Arizona.
    Date: Fri, 5 Oct 2012 12:21:45 -0600
    From: [email protected]
    To: [email protected]
    Subject: Help with updates for CS6
    Re: Help with updates for CS6 created by Jeff A Wright in Downloading, Installing, Setting Up - View the full discussion
    Crunkle1 you are welcome to work directly with our support team for guided assistance.  If you go to http://www.adobe.com/ and select Help and Contact Us you should be given the option to contact our support team via telephone.  Which country/region are you in?
    Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/4752605#4752605
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4752605#4752605
    To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4752605#4752605. In the Actions box on the right, click the Stop Email Notifications link.
    Start a new discussion in Downloading, Installing, Setting Up by email or at Adobe Community
    For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

  • I need help with updating to ios 7.1.1

    After tapped on update and it turned off for about 5 mins it started showing an iTunes icon with a charger under it. I'm so confused what should I do and my ipad is in charge but it's not doing anything! Please help!

    YOU ARE IN RECOVERY MODE
    1. Turn off iPad
    2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
    3. Plug USB cable into computer's USB port
    4. Hold Home button down and plug the other end of cable into docking port.
    DO NOT RELEASE BUTTON until you see picture of iTunes and plug
    5. Release Home button.
    ON COMPUTER
    6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
    7. Select "Restore iPad"...
    Note:
    1. Data will be lost if you do not have backup
    2. You must follow step 1 to step 4 VERY CLOSELY.

  • Need help with instllation for IOS 9

    Can anyone help me with installing Reader for IOS 9?  I don't see this version (Mavericks) listed as a system requirement for Adobe Reader installation.  (Also, i've just created an acct with Adobe and don't understand why I've been directed 2-3 times to different pages to ask this question, very frustrtaing and tedious....)

    There isn't an iOS 9, we're up to iOS 7 on iPad, iPhone and iPod. Perhaps you mean Mac OS 10.9 (Mavericks)?

  • Please help with updated iphone

    I updated my iphone 4 to the IOS 5 on Saturday, and now I can't receive any texts but can send them. Also under my messages it says that it can only be received to my email and my phone number is still verifying. Can someone please help me?

    Settings>General>International.
    Set the calendar to "Gregorian". You have it set to Buddhist.

  • PLEASE HELP with Audio for YouTube!

    Hi,
    I KNOW YouTube is not the best for quality, but I absolutely HAVE TO post a couple of videos there!
    So.... having used Standard footage & the regular preset for DV-shot footage, does anyone KNOW which Encoding conversion to use (and I assume bitrate selection as well) that will allow me to post them on YouTube and actually hear something which even resembles the professionally Mastered recordings I am using.  So far I have tried WMV, h264 & a few others with various bitrates and most all of them sound horrible once YT converts them.  I was fine with the WMV video but the audio is way to disgusting to even listen to (especially compared to what the audio actually really is).  I have read some posts here suggesting FLV, WMV, etc, & I am truly at a loss and in major need of help here.  I have read Eddie's article link, & still the audio once YT does "it's thing" is ridiculous!
    The audio sounds great (good enough) on my computer after Encoder does its thing, but if anyone has encountered this and has the answer....PLEASE - what conversion & WHAT BITRATE should I use to make YT NOT ruin my recordings (and sound good on there)?!?!
    I even considered importing an already converted AAC or mp3 audio file into Pro, & then exporting it via Media Encoder but don't even think that's possible (or necessary).
    Please help as I HAVE to post it on YT yesterday already!
    As always, thank you for you help!!

    I never really had problems with sound quality on youtube...but I just use stereo pcm/wav mostly in editor. I think you should post what your using in your project and what you are exporting it as...cause its too vague to really give much specific advice re: helping you. also, say whether you have any sound codec packs or anything loaded...anything other than the original program codecs...and say what version of the product you are using...premiere pro what ??

  • Please help with updated info how to Move iTunes 10.5.2 to a new MacBook Pro

    With Christmas fast approaching, and new MAC computers being left under the tree, I would find it helpful for an update as to how best to move my son's iTunes library from my iMac (late 2011 version with Lion) which he is sharing to his new MacBook Pro (Early 2011 with Lion upgrade) . There is a lot of old information floating around on how to do this with prior versions of iTunes, but with iCloud and Apps now in the cloud I would like someone knowledgeable to update me and the community with the best way to do this for the latest versions of iTunes running on Lion. He also has his iPhone 4 synched with his account on my iMac and would like to deauthorize his iTunes on my iMac and have him sync on his new computer as well.   I know it is probably hidden among the forums somewhere, but with a lot of people upgrading to new computers, it would be helpful for a refresher on this thread. Thanks!

    Hi,
    See Here for...
    iTunes: How to move your music to a new computer
    See here for Authorise...
    Open iTunes
    From the Store menu, choose Authorize This Computer. (In earlier versions of iTunes, access this option from the Advanced menu).
    When prompted, enter your Apple ID and password, then click Authorize.
    From Here
    About authorization and deauthorization
    Deauthorise...
    Open itunes on the computer you want to deactivate. Make sure you are logged in.  Under the "Store" menu, pull down top "deathorize this computer"

  • Please help with sizing for a canvas wrap

    I have looked at every video possible on this. I don't know what I am doing wrong?
    RIght now my image size in cs3 is
    60.2m
    5616x3744 in pixels
    18.72x12.48 in inches at 300 dpi
    I want to make my image capable of being a 36x24 inch gallery wrap. I realize I have to go into image size but when I raise it to a 36x24 my calculations go out the roof! Is that okay?
    222.5M
    10800x7200 pixels
    36x24 in inches at 300 dpi
    Can I send something that large to a printing lab?
    Sorry this is only my second time to do a gallery wrap and I am clueless about image size as far as measurements go!
    I do have a 5d mark2 shooting RAW always that should allow me to have an image size of this quality easily right?

    Grant
    That is exactly why I am posting this... I HAVE NO FREAKING CLUE that I can reduce the dpi and if so how low can I go with my image needing to be sized at 36x24? Sorry, I am really just kidding around! I am no computer whiz with digital stuff, my love is strictly photography. I am so scared I will loose the quality I don't want to make a wrong move. I don't even know if I am suppose to up my size that much. I know my camera is good, but when it spits out a size like 18x12 in cs3 how high can I size it up and drop the dpi before I loose quality? Is there some kind of chart for this?
    Thanks for your help!

  • Please help with snippet for form.

    I'm building my wedding photography site with iWeb and I want to place a form on there where customers can, via a series of pull down menus, choose various addons to their wedding package which I want to show a running total at the bottom for an instant quote. I would then need to get a copy of this data sent to me.
    What kind of HTML snippet would I need and where could I find one?
    Thanks in advance.

    Thanks Scott, that jot form looks great for a contact form etc. Due to being add free. But it doesn't look like it allows me to add a value to a selection on a drop down menu and a way of adding it up/displaying the total on my site.
    Example id need fields like this;
    "album required"
    The available selections could be:
    "12 x 8" value added to viable running total would be £100
    "14 x 10" value added to viable running total would be £150
    "16 x 12" value added to viable running total would be £200
    Then another field may be:
    "Hi Res CD required?"
    the available selections could be:
    "no thanks!" having a value of £0
    "50 images" having a value of £100
    "all images" having a value of £250
    So if the user chooses "16 x 12" and "all images" the running total on the page would show the user "£450"
    Any help would be greatly appreciated.
    Thanks!

  • Please help with script for right-mouse click on 3D objects

    Hi!
    I have PDF file with two simple 3d objects (for example with two cube).
    I need to make script that when user right-click to first cube, a PDF file (c:\a.pdf) opening (or c:\b.pdf for second one) in new windows. How to make it? Thank you so much!

    Hi,
    please check SDK sample 22 Right-Click, there is everything you need.
    First catch RightClickEvent, then create the menu entry when beforeAction = true, and when beforeAction = false you have to remove it again (otherwise you will receive an error when rightclicking again).
    Regards
    Sebastian

  • Please help with Specs for Elements 10

    Its been so difficult to get to the detailed specs for Elements 10
    Can anyone tell me if it does the following
    1. Import raw data from a Panasonic X5?
    2. Adjust vibrancy directly?
    3. Add starburst effect like in this photo
    Thanks

    See this Adobe document for the latest Adobe Camera RAW (ACR) update:
    http://www.adobe.com/support/downloads/detail.jsp?ftpID=5371
    The "ReadMe" link lists the supported cameras.  (The DMC-LX5 is supported.)
    Yes, a RAW file will open directly in ACR, and JPGs can be opened in ACR by using File...Open As.
    No.  You'll need to find a plug-in that does starbursts.
    Ken
    P.S.,  Barbara, once again, my slow typing did me in....

  • Please help with query for 5 lastest opening balance  !!!!!!!!!!!

    Can anyone plese tell me or guide me how to write the query to show the 5 lastest opening balance from the A/R invoice on the specific BP partner?
    Example
    The box to input "BP partner"
    and then show,
    Lastest transaction | Ship date | Invoice number | Balance Amount | Culmulative
    1    
    2
    3
    4
    5
    Your help will be very very appreciated.

    This is very good but I would like to show only the top 5 remaining invoice. I think that I have to combine it with JDT1. I have seen one query that may be able to apply on my case.
    SELECT
    T1.CardCode + '' AS 'BP Code',
    T2.Notes2 AS 'BP Name',
    T0.RefDate,
    CASE
         WHEN T0.TransType = 13 THEN 'IN'
         WHEN T0.TransType = 14 THEN 'CN'
         WHEN T0.TransType = 30 THEN 'JE'
         WHEN T0.TransType = 24 THEN 'RC'
         WHEN T0.TransType = 46 THEN 'PS'
         ELSE 'Error ! ! !'
    END AS 'Doc Type',
    T0.Ref1 'Doc. Number',
    ISNULL(T0.FCCurrency, ' - ') AS 'Ccy',
    (T0.BalFcDeb - T0.BalFcCred) AS 'Bal. F. Ccy',
    (T0.BalDueDeb - T0.BalDueCred) AS 'Bal. Rs',
    ISNULL((SELECT T0.BalDueDeb -T0.BalDueCred WHERE DateDiff(mm, T0.RefDate, '[%1]') <= -1)                     ,0) AS 'Future',
    ISNULL((SELECT T0.BalDueDeb -T0.BalDueCred WHERE DateDiff(mm, T0.RefDate, '[%1]') = 0)                         ,0) AS 'Current Mth',
    ISNULL((SELECT T0.BalDueDeb -T0.BalDueCred WHERE DateDiff(mm, T0.RefDate, '[%1]') = 1)                         ,0) AS '1 Mth Ago',
    ISNULL((SELECT T0.BalDueDeb -T0.BalDueCred WHERE DateDiff(mm, T0.RefDate, '[%1]') = 2)                         ,0) AS '2 Mth Ago',
    ISNULL((SELECT T0.BalDueDeb -T0.BalDueCred WHERE DateDiff(mm, T0.RefDate ,'[%1]') = 3)                         ,0) AS '3 Mth Ago',
    ISNULL((SELECT T0.BalDueDeb -T0.BalDueCred WHERE DateDiff(mm, T0.RefDate, '[%1]') between 4 and 6)    ,0) AS '4 - 6 Mth Ago',
    ISNULL((SELECT T0.BalDueDeb -T0.BalDueCred WHERE DateDiff(mm, T0.RefDate, '[%1]') >= 7)                       ,0) AS '>7 Mth Ago'
    FROM JDT1 T0
    INNER JOIN OCRD T1 ON T0.ShortName = T1.CardCode
    LEFT OUTER JOIN OCPR T2 ON T1.CardCode = T2.Cardcode
    LEFT OUTER JOIN OJDT T3 ON T0.TransID = T3.TransID
    LEFT OUTER JOIN OINV  T4 ON T3.TransID = T4.TransID
    LEFT OUTER JOIN ORIN  T5 ON T3.TransID = T5.TransID
    WHERE
    T1.CardType = 'C' and Balance != 0
    and (T0.BalDueDeb - T0.BalDueCred) != 0
    but still try to figure it out....

  • Please help with the FOR loop and the array..

    I was trying to place some words in the Movie Clip
    "TextPanel" and set a
    random position to each of them.
    But it's not working.
    1) I created a Movie Clip "word" and inside that MC I created
    a text field
    and gave it an identifier "textFiled".
    2) The linkage name for Movie Clip "word" I set to "word".
    3) In the actionscript I created an Array called "aWords".
    4) Then I created a FOR loop that should
    place (attach) Movie Clips "word0", "word1", "word2" and
    "word3" to the
    movie clip TextPanel, and set the textField text for each of
    them to the
    text from the Array.
    But the script attaches 4 Movie Clips with a name
    "Undefined", instead of 4
    different names (from the Array).
    What is wrong with this script?
    var aWords:Array = [apple,banana,orange,mango];
    for(i=0;i<aWords.length;i++){
    var v = TextPanel.attachMovie("word","word"+i,i);
    v.textFiled.text = aWords
    v._x = randomNumber(0,Stage.width);
    v._y = randomNumber(0,Stage.height);
    Thanks in advance

    But in my Post I already wrote v.textFiled.text = aWords
    so I don't understand what were you correcting..
    And one more:
    I have tested it by changing the
    v.textFiled.text = aWords; to v.textFiled.text = "some
    word";
    and it's working fine.
    So there is something wrong with the Array element, and I
    don't know why..
    "aniebel" <[email protected]> wrote in
    message
    news:ft2d5k$lld$[email protected]..
    > Change:
    > v.textFiled.text = aWords;
    >
    > to:
    > v.textFiled.text = aWords
    >
    > It needs to know which element inside the array you want
    to place in the
    > textfield (or textfiled) :)
    >
    > If that doesn't work, double check that your instance
    name is correct
    > inside
    > of "word".
    >

  • Please help with script for 3D object

    Hi!
    I have PDF file with simple 3d object (for example a cube).
    I need to make script that when user right-click to this cube, some PDF file (c:\mypdf.pdf) opening in new windows. How to make it? Thank you so much!

    Hi!
    I have PDF file with simple 3d object (for example a cube).
    I need to make script that when user right-click to this cube, some PDF file (c:\mypdf.pdf) opening in new windows. How to make it? Thank you so much!

Maybe you are looking for

  • Applet not showing in browser OR appletviewer window not appearing

    hi 1. I have small java code - hello.java import java.awt.Graphics; public class hello extends java.applet.Applet public void paint(Graphics g) g.drawString("Hello java...................",600,300); which correctly compiled 2. then I wrote an html fi

  • Google adsense ads no longer appear after latest update

    Hello, I just recently did quite a few updates through updater and now all my Google Adsense Ads disappeared. Well, they are still there, but solid blocks of color with no text. Other than the update, I didn't do anything else besides add some text t

  • ITunes Media folder external drive location not found at restart

    How can I force iTunes to remember where my iTunes Media folder is located? I have followed the Apple iTunes Media library move instructions to the letter and the new folder location is correctly shown in the iTunes/Preferences/Advanced tab. If I clo

  • Logical File Names in Transport.

    Hi Gurus, Is there a way to attach LFN's to a a particular transport. I coudn't find this option in Transport Management Systems. As I created these LFN's, I am not sure which transport request they are sitting on.

  • OIM approval -  End User Experiance

    Hello, In my configuration for OIM resource request : * 1st level of approval goes to manager -> user could login and check status of his request and could understands that it is pending on manager and verify his manager name in the request pending s