Please Help - WRT54GS "not able to connect to internet"

I just purchased a WRT54GS Wireless Router, and I follow the instructions by putting the CD in first, and I follow the instruction on the CD, but every time I try and set it up a message comes up and says "The router is not able to connect to the internet." blah blah. And I've tried resetting the router, turning the DSL modem off and back on, restarting the computer, unplugging and plugging back in over and over, and I still can't get it to work. Any advice would help. Thanks.

1.Make sure you have good internet with your pc direct to the dsl modem
2. If so, connect the router to the DSL modem and tthen the pc to the router.
3.then open a web page and enter 192.168.1.1 no user name but the default password is "admin"
4.You may have to turn on PPoe on the basic set up page and it will also need your sign on and password. put those in.. leave the rest defaults. Save the settings and then try on home icon on your web browser to see if you can get to the internet.
Message Edited by jet75080 on 01-14-200707:25 PM
Steak is my favorite animal.

Similar Messages

HT204409 I have a MacBook Pro and not able to connect to Internet? PLEASE help!

I have a MacBook Pro and not able to connect to Internet. I have other HP comp and iPad and am able to connect. I have contacted AppleCare....they said disconnect router and leave unplugged for an hour, which I did...still no connection. Any suggestions? Thanks!

Call Apple Care back & tell them their suggestion did not work.
Solution may be found if you search in the "More Like This" section over in the right column.

The wi-fi button on my iPad 2 is not functioning. I have tried resetting the network, worked for 5 minutes. Am not able to connect to internet to reset to factory. What else can I do?

The wi-fi button on my iPad 2 is not functioning. I have tried resetting the network, worked for 5 minutes. Am not able to connect to internet to reset to factory. What else can I do?

Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased. http://support.apple.com/kb/ht1430
Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at
http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are drooping internet connection)
    •    Launch Settings app
    •    Tap on Wi-Fi
    •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
    •    In the window that opens, tap on the Renew Lease button
6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
~~~~~~~~~~~~~~~~~~~~~~~~~
Fix WiFi Issue for iOS 7
http://ipadnerds.com/fix-wifi-issue-ios-7/
iOS 6 Wifi Problems/Fixes
Wi-Fi Fix for iOS 6
https://discussions.apple.com/thread/4823738?tstart=240
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
iPad: Issues connecting to Wi-Fi networks
http://support.apple.com/kb/ts3304
How to Boost Your Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.hmL
Troubleshooting a Weak Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Signal.htm
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
10 Ways to Boost Your Wireless Signal
http://www.pcmag.com/article2/0,2817,2372811,00.asp
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
Some Wi-Fi losses may stem from a problematic interaction between Wi-Fi and cellular data connections. Numerous users have found that turning off Cellular Data in Settings gets their Wi-Fi working again.
You may have many apps open which can possibly cause the slowdown and possibly the loss of wifi. In iOS 4-6 double tap your Home button & at the bottom of the screen you will see the icons of all open apps. Close those you are not using by pressing on an icon until all icons wiggle - then tap the minus sign. For iOS 7 users, there’s an easy way to see which apps are open in order to close them. By double-tapping the home button on your iPhone or iPad, the new multitasking feature in iOS 7 shows full page previews of all your open apps. Simply scroll horizontally to see all your apps, and close the apps with a simple flick towards the top of the screen.
Wi-Fi or Bluetooth settings grayed out or dim
http://support.apple.com/kb/TS1559
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

Not able to connect to internet usig LAN

hiii
i have domain network which is connected through LAN for all the user machines now suddenly what happened we don't know all the machines are not able to connect to internet and domain also.
help me to get out of this problem
thanks in advance
with regard's
haasan
thanks & regrds sri ram

Hi
I think we need bit more information regarding this issue.
You've said machines are not able to connect to Internet and Domain. Two different things are you not able to log on to the domain with your domain user accounts.
Are the Domain Controllers are up and running or have you checked if your switchs are working properly.
Please update with the above then we can help further.
Thanks
Umar

Thinkpad- T61 - Not able to connect to Internet either by cable or Wireless

Hi Friends
I'm having a T61 Thinkpad and yesterday i had tried system restore, but it has not done any changes,
But then, I'm not able to connect to Internet either by cable or by Wireless.
When i pressed Thinkvantage, i could see the Hardware wireless is on "OFF" status and I'm not able to turn it ON
Can anyboby help me on fixing this issue and enable connect to INTERNET
Thanks in advance
Regards
Sasi

Hi,
can you provide a bit more detail, as can you use the 3G network to access the web, and what security is your wireless using?
Regards
Ryan

My iPhone 3gs is not able to connect through internet. I have a Airtel wireless at home.Phone connects through wireless but not opens any page or itune or apllications

My iPhone 3gs is not able to connect through internet. I have a Airtel wireless at home.Phone connects through wireless but not opens any page or itune or applications.

Hi,
can you provide a bit more detail, as can you use the 3G network to access the web, and what security is your wireless using?
Regards
Ryan

HP Officejet Pro 8600 not able to connect to internet ip setting disabled

My printer has been connected and working in wireless mode for 2 months. now not able to connect and printer is locked and shows "IP no link".

Power off both printer band router. Power on router wait 3 mins. Power on printer and verify it connects to your router and you have a valid IP. Reboot computer and now try.
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired!

Not able to connect to Internet (Safari pre-set websites, YouTube, i-Tunes)

I am not able to connect to the internet, even though it appears I'm getting wireless on the iTouch. Have read numerous threads, nothing I have done has worked (tying to match my iTouch wireless settings to my Windows laptop settings, restarting router multiple times, choosing other under networks and trying to reset up my router config, trying to connect to IP using http://192.168.1.1 and/or http://192.168.1.1).
So get message "Cannot Connect to iTunes store", "Cannot connect to YouTube", and "Safari can't open the page because it can't find the server".
On my wirless settings (note my router is a Netgear DG834GB and works fine on both Windows based laptops in our home):
- My home network is checked;
- Under DCHP, BootIP, and Static all fields BUT router, search domains, client ID are checked.
- HTTP proxy is currently set to Auto with URL blank.
Apologies, been trying to read through threads to find the answer that will get me going, but either haven't found it yet or things like installing firmware (where do I install it, on my laptop or itouch, etc?) I don't understand what exactly needs to be done to do that.

disable wireless security on your router and see if you can connect

Not able to connect to internet in boot camp

First time using a mac computer so I decided to install vista on my macbook pro. But when I enter Vista I am not able to connect to the internet, I have looked through the leopard and vista discs trying to find the right files so I can use the internet. So any suggestions on how I can connect to the internet using vista?

After Vista installed, did you insert the Mac drivers CD (if you're running the beta Boot Camp) or the Installation DVD (if you're running Leopard)? Without the Apple-supplied drivers you probably won't have a lot of things working right.
Doug

Help Please!! Not able to connect to database from servlets

Hi all,
I hava placed a servlet which connects to a database in examples\web-inf\classes dir. I have specified everything in web.xml. But when I run the servlet it says no suitable driver found even though I have placed the driver tomcat/common\lib\classes12.zip in my classpath . I have also trtied converting the file to jar and running the servlet but I am not able to get the connection to database.
I get the following error.
Starting service Tomcat-Standalone
Apache Tomcat/4.0.6
Starting service Tomcat-Apache
Apache Tomcat/4.0.6
Error in init:oracle.jdbc.driver.OracleDriver
java.lang.ClassNotFoundException: oracle.jdbc.driver.OracleDriver
at org.apache.catalina.loader.WebappClassLoader.loadClass(WebappClassLoader.java:1406)
at org.apache.catalina.loader.WebappClassLoader.loadClass(WebappClassLoader.java:1254)
at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:313)
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Class.java:120)
at testConnectionServlet.init(testConnectionServlet.java:19)
at javax.servlet.GenericServlet.init(GenericServlet.java:256)
at org.apache.catalina.core.StandardWrapper.loadServlet(StandardWrapper.java:918)
at org.apache.catalina.core.StandardWrapper.allocate(StandardWrapper.java:655)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:214)
at org.apache.catalina.core.StandardPipeline.invokeNext(StandardPipeline.java:566)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:472)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:943)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:190)
at org.apache.catalina.core.StandardPipeline.invokeNext(StandardPipeline.java:566)
at org.apache.catalina.authenticator.AuthenticatorBase.invoke(AuthenticatorBase.java:475)
at org.apache.catalina.core.StandardPipeline.invokeNext(StandardPipeline.java:564)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:472)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:943)
at org.apache.catalina.core.StandardContext.invoke(StandardContext.java:2347)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:180)
at org.apache.catalina.core.StandardPipeline.invokeNext(StandardPipeline.java:566)
at org.apache.catalina.valves.ErrorDispatcherValve.invoke(ErrorDispatcherValve.java:170)
at org.apache.catalina.core.StandardPipeline.invokeNext(StandardPipeline.java:564)
at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:170)
at org.apache.catalina.core.StandardPipeline.invokeNext(StandardPipeline.java:564)
at org.apache.catalina.valves.AccessLogValve.invoke(AccessLogValve.java:468)
at org.apache.catalina.core.StandardPipeline.invokeNext(StandardPipeline.java:564)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:472)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:943)
at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:174)
at org.apache.catalina.core.StandardPipeline.invokeNext(StandardPipeline.java:566)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:472)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:943)
at org.apache.catalina.connector.http.HttpProcessor.process(HttpProcessor.java:1027)
at org.apache.catalina.connector.http.HttpProcessor.run(HttpProcessor.java:1125)
at java.lang.Thread.run(Thread.java:484)
Error in init:No suitable driver
java.sql.SQLException: No suitable driver
at java.sql.DriverManager.getConnection(DriverManager.java:537)
at java.sql.DriverManager.getConnection(DriverManager.java:177)
at testConnectionServlet.init(testConnectionServlet.java:27)
at javax.servlet.GenericServlet.init(GenericServlet.java:256)
at org.apache.catalina.core.StandardWrapper.loadServlet(StandardWrapper.java:918)
at org.apache.catalina.core.StandardWrapper.allocate(StandardWrapper.java:655)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:214)
at org.apache.catalina.core.StandardPipeline.invokeNext(StandardPipeline.java:566)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:472)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:943)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:190)
at org.apache.catalina.core.StandardPipeline.invokeNext(StandardPipeline.java:566)
at org.apache.catalina.authenticator.AuthenticatorBase.invoke(AuthenticatorBase.java:475)
at org.apache.catalina.core.StandardPipeline.invokeNext(StandardPipeline.java:564)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:472)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:943)
at org.apache.catalina.core.StandardContext.invoke(StandardContext.java:2347)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:180)
at org.apache.catalina.core.StandardPipeline.invokeNext(StandardPipeline.java:566)
at org.apache.catalina.valves.ErrorDispatcherValve.invoke(ErrorDispatcherValve.java:170)
at org.apache.catalina.core.StandardPipeline.invokeNext(StandardPipeline.java:564)
at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:170)
at org.apache.catalina.core.StandardPipeline.invokeNext(StandardPipeline.java:564)
at org.apache.catalina.valves.AccessLogValve.invoke(AccessLogValve.java:468)
at org.apache.catalina.core.StandardPipeline.invokeNext(StandardPipeline.java:564)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:472)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:943)
at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:174)
at org.apache.catalina.core.StandardPipeline.invokeNext(StandardPipeline.java:566)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:472)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:943)
at org.apache.catalina.connector.http.HttpProcessor.process(HttpProcessor.java:1027)
at org.apache.catalina.connector.http.HttpProcessor.run(HttpProcessor.java:1125)
at java.lang.Thread.run(Thread.java:484)

after inserting the line in the classpath for classes12.zip try the whole proc again. if it does not work then u should try putting it in the jdk lib dir and if ok can put it also in the \jdk1.3\jre\lib and \jdk1.3\jre\lib\ext dirs....
it has worked perfectly for me and i dont c any reason that it should not do for u also.

Please help! Not able to set Video input Port(S-Video or Composite)on Linux

Hi
I am using JMF2.1.1e(Linux performance pack) for video capturing on Linux OS. I want to set video input port(S-Video or composite) through my application. I am using the following code:
     if ( dataSource != null )
          arrControls = dataSource.getControls ();
     if ( arrControls != null )
          nCount = arrControls.length;
     System.out.println("No. of Controls: " + nCount);
     for ( i = 0; i < nCount; i++ )
          if ( arrControls[i] == null )
               continue;
          if ( !(arrControls[i] instanceof Control) )
               continue;
          componentControl = ((Control)arrControls).getControlComponent ();
          System.out.println("ComponentControl : " + componentControl);
          if ( componentControl == null )
               continue;
But, i am getting No. of Controls: 0 (Zero). So i am not able to get any control component also. Rest of the application is working fine. Please help me solving this problem.
Thanks in advance.

To go a stage further.
Google run a Jabber server for their service.
Jabber apps (those that can) use a Protocol called Jingle to make the A/V connections.
Google's version is not even that compatible with other Jabber apps. (See Here)
The Plug-in in the Google Install (Or the Standalone Web Browser Plug-in allow Browsers to access the GoogleTalk A/V side as does the Standalone PC app called GoogleTalk as well.
iChat uses a process called SIP (Session Initiation Protocol) to connect to other iChat Users or to the AIM for PC app.
However this also works in any iChat to iChat Connection no matter if the Buddy List is an AIM Login based one, Jabber (including GoogleTalk) or A LAN based Bonjour Chat.
In you care this is not going to work.
Getting the Standalone (Intel only) Browser Plug-in and using the Chat option in the Google Mail Web page is probably the easiest option.
7:31 PM Friday; January 7, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"

WRT54GS not able to connect wirelessly, or through ethernet

Hello all, I have a problem with my WRT54GS router that has just popped up over the last couple of weeks. It is connected to internet via ethernet cable. Light shows receiving signal. Wireless signal is intemittent, but unable to connect wirelessly. Direct connection from router to desktop does not allow internet access. All port lights on router work when something is plugged into them. Am currently accessing internet via direct connect from modem to desktop. I have attempted to reset router when connected to ethernet, but my wireless internet connection only lasts about 1 minute, then I lose that capability. I still don't get any connection thru wired desktop. Therefore I am not able to work with router settings or anything. Any help on this matter would be greatly appreciated.

Internet Service Provider and Modem Configurations
What ISP Service do you have? Cable or DSL?
What ISP Modem Mfr. and model # do you have?
Is ISP Modem/Service using Dynamic or Static WAN IP addressing?
What ISP Modem service link speeds UP and Down do you have?
Check cable between Modem and Router, swap out to be sure. Link>http://en.wikipedia.org/wiki/CAT6 is recommended.
Check ISP MTU requirements, Cable is usually 1500, DSL is around 1492 down to 1472. Call the ISP and ask.
http://kb.linksys.com/Linksys/ukp.aspx?vw=1&docid=88e63d78588142e6bb68e22d7faf2046_Configuring_the_M...
For DSL/PPPoE connections on the router, ensure that "Always ON" option is enabled.
If the ISP modem has a built in router, it's best to bridge the modem. Having 2 routers on the same line can cause connection problems: Link>http://www.practicallynetworked.com/networking/fixing_double_nat.htm and http://cognitiveanomalies.com/cisco-nat-how-nat-works/. If the modem can't be bridged then see if the modem has a DMZ option and input the IP address the router gets from the modem and put that into the modems DMZ. Also check the routers DHCP IP address maybe conflicting with the ISP modems IP address of 192.168.0.1. Check to see if this is the same on the ISP modem, and if modem can't be bridged, change the DIR router to 192.168.1.1 or .0.254.
Prefered connection method with a ISP stand alone modem:
I recommend that you have your ISP check the cabling going to the ISP modem, check signal levels going to the ISP modem. For cable Internet, RG-6 coaxial cable is needed, not RG-59. Check for t.v. line splitters and remove them as they can introduce noise on the line and lower the signal going to the ISP modem. Connecting to the ISP modem could result in a false positive as the signal to the modem could be just enough to that point then adding on a router, could see problems. Ensure modem is working well too. Bad modems are out there as well. The router operation is dependent upon getting good data flow from the ISP modem and the modem is dependent upon getting good signal from the ISP Service.
What wireless modes are you using?
Try setting a manual Channel to a open or unused channel. 1, 6 or 11. 11 for single mode N if the channel is clear. 13 for EU regions. Try channel 48 or 149 on 5Ghz. http://en.wikipedia.org/wiki/List_of_WLAN_channels
http://kb.linksys.com/Linksys/ukp.aspx?vw=1&docid=f2625b15a5d7454b8e7fafbe65d5aa63_4009.xml&pid=80&r...
What security mode are you using? Preferred security is WPA-Personal. WPA2 Only. http://kb.linksys.com/Linksys/ukp.aspx?vw=1&docid=8ce9e83bd3784001aee72da7f1ef48e8_Changing_the_basi...
http://kb.linksys.com/Linksys/ukp.aspx?pid=80&vw=1&articleid=19073
What wireless devices do you have connected?
Ensure any devices with WiFi adapter drivers are updated.
Any 2.4Ghz or 5Ghz cordless house phones or WiFi APs near by?
Any other WiFi routers in the area? Link> Use http://www.techspot.com/downloads/5936-inssider.html to find out. Use v3. How many?
Router Placement
Forum User - "Well I feel really dumb. After moving the router away from other electronic devices my speeds are back to normal. Just a heads up for anyone experiencing slow speeds, you might want to move it away from other electronics and see if that helps."
3-6' feet minimum safe distance between devices.
Placement on main level floor and central in the building and WELL ventilated is preferred. Not in basements or closets as building materials, or near by electronics devices could interfere or hinder good signal propagation.
http://kb.linksys.com/Linksys/ukp.aspx?vw=1&docid=d9a3b1b2039741948a2365b053a93ea8_3759.xml&pid=80&r...

Please help ,GR not able to Print

Hi Gurus ,
I would really appriciate if you could help me to fix this problem , User is not able to print GR document .
Thanks in advance.

Hi Greetings
In addition to the condition records being maintained for the GR message output type, the following setting is required in the user profile.
Transaction
SU3 -- > Parameters -->
Parameter ID "NRD" and parameter value "X".
Gobinathan G

2nd Try: Please Help : UIX : Not able to use messageFileUpload along with m

UIX : Not able to use messageFileUpload along with messageChoice
I used messageFileUpload UIX element and associated upload button to fileupload servlet. This servlet just captures the file and put it in desired location. This works just fine.
My client wanted me to add another choice filed on UI. I used messageChoice. I named the field as fileType. All the options have name and value populated but when I submit the form servlet is reading fileType as NULL.
I am not sure what's happening. Please let me know how should I send file handle as well fileType ?
Thanks,
Linda

What exactly are you expecting this to do for you?
Forall is designed to process batches of DML to prevent context switching from PL/SQL to SQL.
Has no relevance for what you are trying to do.
If you don't want to call the procedure multiple times, you need to rewrite it to passs the cursor to the function, then have the function process all the records.
Carl

I'm not able to connect to internet through my wifi router, which is Sitecom 150N working fine with pc

I'm not able with ipod touch to connect to internet through my wifi router, which is Sitecom 150N working fine with pc

Your router may not have given your iPod a valid IP address when the iPod requested it. To check on this go to Settings > Wifi > your network name and touch the ">" to the right to see the network details. If the IP address shown starts with 169 or is blank then your router didn't provide an IP address and you won't be able to access the Internet.
Sometimes the fix for this can be as simple as restarting your router (remove power for 30 seconds and restart). Next, reset network settings on your iPod (Settings > General > Reset > Reset network settings) and then attempt to connect. In other cases it might be necessary to update the router's firmware with the latest from the manufacturer's support web pages.
If you need more help please give more details on your network, i.e., your router model and version (the 150n designation is not a unique model), the wifi security being used (WEP, WPA, WPA2), is MAC address filtering being used, etc.

Please Help - WRT54GS "not able to connect to internet"

Similar Messages

Maybe you are looking for