Please, I don't want any suggestions from the awesome bar! Using the tools menu does not stop it...

I don't want any suggestions! I have set the control through the Options many time to nothing but it always comes back with a new session. Please can I stop it completely!

If you do not keep changes after a restart or otherwise have problems with preferences, see:
*http://kb.mozillazine.org/Preferences_not_saved

Similar Messages

When I plug in my ipod, I get a message that access is blocked by my password on the ipod. However I can't get to my ipod to change it. Any suggestions? The "home" button does not work

I've been told that I need to sync my new computer with my apple ipod. HELP!!

If you do not know the passcode to your iPod Touch, you'll need to connect the iPod to the iTunes library you normally sync it with and restore it in recovery mode. However, since your home button doesn't work, you'll need to use a program such as this one to try and get it into recovery mode.
http://jaxov.com/2010/05/recboot-iphone-recovery-mode/
B-rock

I cannot send or receive text messages from other iPhone users. I don't get an error I just don't receive any messages and the other users do not receive mine.

I cannot send or receive text messages from other iPhone users. I don't get an error I just don't receive any messages and the other users do not receive mine.

Reset the devices: Hold down the home button along with the sleep/wake button until you see the apple, then let go.

I have win7, outlook 2007 tried to sync with icloud but i get an error message and the calendar is blank. Thanks apple? Any suggestions from the community?

I have win7, outlook 2007 tried to sync with icloud but I get an error message and my calendar is blank. I do not see my outlook calendar, on the left pane under all calandar I see my me account checked and all others are unchecked. I looked at icloud and all the data is in and the iphones syncl with ipad but something is not right with my PC Outlook. I cannot get back to the good old mobileme. Thanks APPLE? Any suggestions from the community?

This issue can be caused by corrupted cookies.
Clear the cache and the cookies from sites that cause problems.
* "Clear the Cache": Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
* "Remove the Cookies" from sites causing problems: Tools > Options > Privacy > Cookies: "Show Cookies"
* http://kb.mozillazine.org/The_page_is_not_redirecting_properly

I have a macbookpro. when I connect any camera to the mac it does not show as a device. How do I load my pictures to either iPhoto or Aperture? It worked before but just stopped working. Any suggestions?

I have a macbookpro. I use Aperture and Iphoto. When I connect any camera to the Mac it does not open it as a device in Iphoto, Aperture or in Finder. It use to work but just stopped. Any sugestions?

Here is the full story. It may be long so please bear with me. I take a lot of pictures and movies. Since I have over 30,000 pictures I decided to place the Iphoto library on an external drive to save space on my internal drive since ot was getting very full. After I did that it worked fine for a while. Then one day I could not open the Iphoto library. Since I was overseas at the time I brought it to the IStudio ( not an Istore) overseas. They said to rebuild the library and they would do that for me. It took all day since I had so many pictures. When they called me and told me it was ready, I went to pick it up. They started to show me the new library. It crashed again. Not knowing how to fix this at the ISudio, they installed Aperture and imported the Iphoto library. This worked fine for a short time.When back in the states, it crashed again just like Iphoto. I took it to the IStore. They did not know why the overseas Istudio did what they did what they did and rebuilt my aperture library. Again it worked fine. Now that I am overseas again. It crashed again. However, I concluded that the reason for these crashes is becuase I have the file on an external drive that derives its power from the Mac and not by itself. When I use it and stop for a while the MAC will go to sleep and this cuases the external drive to shut down. This then causes the library to have inconsistancies. Therefore, when it happened this time I tried to repair the library and after 36 hours it would close down Aperture. Therefore I decided to rebuild the library. That did not work either. So I tried opening the Aperture library with Iphoto. That seemed like it was going to work but after importing half of the 30,000 plus pictures. I photo shut down. I then made a new aperture libary and erged the old library with it. This worked. I now have an aperture library that works. However, when I plug my camera into the MAC nothing happens. The camera does not show up in devices in either Aperture, I photo nor in Finder. The USB port and cord I use works fine becuase I can read my external hard drives fine. I checked as SIG suggested in this thread and everything is set to open aperture when the camera is connected.
I have the newest OS version 10. 7. 2 and the computer frequently updates all my programs. I have not installed any ne software lately. The problem happens both if I am on battery or plugged in. Just before I came overseas the IStore replaced the Battery. I can go back to the IStudio here overseas but the last time I was there and told them about the problem ( I did not have my computer with me) they did not impress me with their wisdom. I will be back in that city in a month and can go there if need be. Thanks for all the help so far. God bless.

On my iphone 4, when i try to open an app, the icons start wiggling like i want to delete them. the touch screen does not always work. sometimes the phone reboots itself. any help out there?

on my iphone 4, when i try to open an app, the icons start wiggling like i want to delete them. the touch screen does not always work. sometimes the phone reboots itself. any help out there?

Have you tried basics from the manual?
restart,
reset,
restore
iPhone User Guide (For iOS 4.2 and 4.3 Software)

I DON'T WANT TO UPGRADE OR HAVE AN ADD ON EVER, DISABLING UPDATES DOES NOT WORK, HOW DO I KILL ALL MEASAGES FOR UP GRADES AND ADD ON'S FOR EVER, ONCE AND FOR ALL, COMPLETELY, THE END AND NEVER BE BOTHERED AGAIN EVER!

I DON'T WANT TO UPGRADE OR HAVE AN ADD ON EVER, DISABLING UPDATES DOES NOT WORK, HOW DO I KILL ALL MESSAGES FOR UP GRADES AND ADD ON'S FOR EVER, ONCE AND FOR ALL, COMPLETELY, THE END AND NEVER BE BOTHERED AGAIN EVER! ALSO IF I KILL MYSELF I WILL HOLD YOU PERSONALTY RESPONSIBLE.edit

There is a world of information in these forums if you use the search function near the top right of this page. Just type in NAS for example and you get many threads on the subject (marked with a green checkmark if it solved the question) another example would be Airport Exterme and sound system. Once you formulate your ideas better then specific questions can be addressed one at a time. You may find that a less expensive choice for a server might be a mac mini. Good luck with your project, ask more specific questions and update you systems profile.

There in my iTunes account balance and I can not buy any program from the store I do not know what problem I would like to help me

There in my iTunes account balance and I can not buy any program from the store I do not know what problem I would like to help me

I agree with gnome up there, more info is needed about what's happening

Hello.i have 6 $ on my apple ID.but i can not purchase any app from the US appstore.can not you halp me anything?thank you in advance

Hello.i have 6 $ on my apple ID.but i can not purchase any app from the US appstore.can not you halp me anything?thank you in advance

Not a good idea on a Public Forum.
Kaxuchelaa wrote:
I can give you my apple ID and password...
This is a user to User Technical Support Forum provided by Apple.
To Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact

Unable to Create Fact and Dimension tables from the Tools menu in EIS conso

Hi All,
In the EIS console, I am unable to create the fact table and the dimension tables to produce my OLAP model from the TOOLS menu whereas I am able to create them by dragging from the left panel where the tables are displayed. I am geeting the below error message:
"An exception occured while retrieving OLAP model metadata. Please verify you are connected to the catalog and try again"
Any help appreciated.
Thanks,
Raja

I have fact and dimension tables in one server and i moved those stuff to another server.If I do that what happen to essbase and about totale EPM System.I want to know how to do this and what I can expect?
Please reply

Remove items from the Tools menu in the Service Manager console

Hi.
I know I have see a post regarding this before, but just wanted to put it out these once again. I'd like to remove items from the Tools menu in the Service Manager console - specifically My Notifications and Create Change Request. This is because
the former allows a user to create notification subscriptions in incorrect Management Packs, and the latter because we are not using Change Management yet. Does anyone have any information on how to achieve this?
Cheers
Shaun

how to customize tools tht are displayed in tool menu
http://technet.microsoft.com/en-us/library/jj134147.aspx#BKMK_tools

When I open Add-ons, from the Tools menu, I get an unresponsive script error: file:///C:/Program%20Files/Mozilla%20Firefox/components/nsExtensionManager.js:623.

When I try to click on Add-ons, from the Tools menu, I get this error message of an unresponsive script: file:///C:/Program%20Files/Mozilla%20Firefox/components/nsExtensionManager.js:623. This is to say the least about the unresponsive script errors at other times. However, at all times, it won't go away - even by clicking on the 'stop script' option; even with checking the 'don't ask again' option. I've cleared the cookies and history as best I could, but it appears that there is some sort of conflict. How can I resolve this? Kevin: [email protected] Thank you.

This is typically caused by a problem with the Personas Plus 1.6 add-on and it conflicting with the Google toolbar.
Try disabling the Personas Plus add-on. To do this open the add-ons manager by selecting the Tools menu, then Add-ons. In the list of installed extensions click on Personas Plus, then click on either disable or uninstall.
If you can not access the add-ons manager, follow the instructions in the [[safe mode]] article to start Firefox in safe mode. You should then be able to disable or uninstall Personas Plus. You can find more information on this procedure in the [[Troubleshooting extensions and themes]] article.

A JE created from the AP Invoice does not include the project # on all trx

A JE created from the AP Invoice does not
include the project # for the amounts entered in the freight box. To
duplicate, do the following:
1. Open an AP Invoice
2. Enter BP Code
3. Select Service type
4. Enter a Project Code in drop down box on Accounting tab
5. Enter a line in the Contents; specify GL Account, amount and Tax
Code Open Freight box
6. Enter an amount in one of the lines
7. Click ADD
8. Go back to the invoice and go to the Accounting tab Click on the GL
journal note and you can see that the line corresponding to the
contents line has a project, but the line corresponding to the Freight
box item does not.
My customer users these projects when printing GL agings and the
information is very important. Shouldn't this information be carried
forward on all transactions on the Journal entry? Is there a way to get this information to post?

Hi Pat,
the project code (PC) on the marketing document may only be applied to the business partner (BP), hence the only row in the associated journal entry (JE) with this project code is that of the BP.
You can link project codes to specific accounts (CoA -> select account -> account details -> project code) & this project code will then be assigned every time the account is found in a JE.
If you require the project code to be applied to the freight, you may assign this project code to the account you have defined for this freight. The drawback is naturally that the project code will then be pulled every time this freight is used, regardless of whether or not the PC is associated with the BP or not.
It is possible to manually assign project codes to every row in a journal entry, hence this should also be possible with SDK. You might explore the possibility whether it might be possible to automatically assign the BP PC to all rows in the JE using a script.
All the best,
Kerstin

Why is the word count different when I use word count from the tools menu to the number at the bottom of my mac word document

Why is the word count different when I use word count from the tools menu to the number at the bottom of my mac word document

This forum is for Apple's defunct office suite 'AppleWorks' - since the word count is not in the places you mention I assume you are talking about Microsoft Word? Though it's just possible someone in this forum might also use Word and know the answer, you would stand a higher chance of getting an answer in Microsoft's own forums. You could also try asking in the forum applicable to your operating system - Lion, Mavericks or whatever - on the reasonably chance of finding someone familiar with Word.

How can I show the photos of the person that im calling? now that im using IOS 7 when i want to call someone the photo /imagine does not appear , how can i fix it? iPhone 5, iOS 7

how can I show the photos of the person that im calling? now that im using IOS 7 when i want to call someone the photo /imagine does not appear , how can i fix it?
iPhone 5, iOS 7

jlfcba wrote:
IOS 7.1.1 doesn't show a "days to sync" parameter anywhere in SETTINGS/Mail,Contacts,Calendars/ACCOUNTS/GMAIL Account/ GMAIL Acccount Info. There is nothing in iTunes relating to such an option either. So, it seems I'm back to square one.
If you have a decent mail provider like Microsoft Hotmail or Outlook.com mail it does.
If you have Gmail it does not. Quite right. Gmail is rubbish.

Please, I don't want any suggestions from the awesome bar! Using the tools menu does not stop it...

Similar Messages

Maybe you are looking for