PLEASE I JUST NEED TO CONFIGURE TO OPEN PORT 22

Very sorry for the redundant post. I am in a desperate situation where the RAID on my NAS has been lost and I need remote tech analysis ASAP.
Can anyone out there please help me configure so that Port 22 is open???
I have a Thecus N5200 and an brand new Airport Extreme.

bevatore wrote:
Do I use the same Private IP address or do I use the Remote Management IP from Sharing in the computer's Preferences.
The "Remote Management" IP address should be the LAN IP address that your router gives to your computer. That should be the same as a "private IP address".
Also, do I need to to configure a DHCP Reservation for this IP in AirPort Utility?
If you don't do that, the IP address of your computer could change between restarts, causing the mapping to fail. If you only have one wireless client, that's probably unlikely. However, reserving an IP address will guarantee that your computer always has the same IP address.

Similar Messages

Firewall in 10.5, how to open ports and how to manage?

I am pulling my hair out with the new firewall in 10.5. In 10.4 I could just set ports as I liked in the control panel, in 10.5 there is no such thing.
I need to for example open port 49999 to allow PageSender to function in my network.
I need to open port 5901 to work with JollyFast VNC, as port 5900 is used by Apple Remote Desktop and the conflict if they both use the same port.
Some of these ports I need permanent open like 59999 and others for one session and than close again, like 5901. Again in 10.4 I made the rule in the pref pane, ticked the box and Bob was your uncle. Now?
I would like to be able to see what ports are open and active on the machine. I have no idea as to where I could see this.
And at the same time I would like to keep the firewall as closed as possible as I am often on line in hotels etc.
So I need help, is there a manual somewhere someone is aware of? Or do you have any answers?

The new Application Firewall does not work in the same way as IPFW (the main firewall in 10.4).
Instead of managing ports, it simply controls the access of applications to any port. Thus, if you want PageSender to receive connections, you simply need to switch the firewall to "Set access for specific services and applications", and then add PageSender to the list, with "Allow incoming connections". When you do this, PageSender will be able to receive connections on any port that it needs to.
If you don't like this method of controlling connections, you can still use IPFW. Apple has removed the GUI, but you can download a GUI application like [NoobProof|http://www.hanynet.com/noobproof> or [WaterRoof|http://www.hanynet.com/waterroof/index.html], and you can then set access for specific ports.
There are no problems with using both IPFW and Application Firewall.
Cheers,
Rodney

I am trying to open Turbo tax from my bank site (I already have it done, just need to submit) says it isn't compatible with this version of FF and I need latest - already have.

Hi,
I just tried to open TT from my bank site - had to do an extension - just need to file. It gives me the error -
The browser you are using is incompatible with TurboTax. TurboTax supports the latest versions of Internet Explorer, Firefox, and Safari, which can be downloaded from each company's respective website. Please access TurboTax from one of these supported browsers.
I have FF version 4. Windows 7 - 32 bit.

you need a newer version of pages to open this document

What do I need to do to open Office (word AND excel) documents, PowerPC issues etc. They don't open on iWork '08. Office 2011? Please advise :-)

What do I need to do to open Office 2004 (word AND excel) documents? PowerPC issues etc. They don't open on iWork '08. Happy to upgrade to iWork or Office just to be able to access my docs from Office 2004 again - please can someone advise? Cheers.

Hi - thanks for this info. Actually I have downloaded a 30-day trial of MS Office for Mac 2011 and it reads/writes. But I was expecting that if I saved it again, either as xls oe xlsx, then I would be able to open the newly-saved document in iWorks '08. This is not the case, any ideas why? cheers, Matt.

How can I stop,document going straigh to Iclod. I just need to open it.

Hi everybody,
just need to find out that, everytime I click on link to open a document, it goes straight in the document. I need document just to open it and not save them. as I have to delate later stage, which is time consuming, I know, I have to set on preference but could not find it how to set it up, can anybody give me some direction please. I hve got Macbook pro.
regards.
Arvind

Do you mean the updating service that Firefox installs and that Windows runs in the background? You can turn that on and off with a checkbox in the Options dialog. See this article: [[Advanced settings for accessibility, browsing, system defaults, network, updates, and encryption]].

I recently purchased a Canon 7D. I own Adobe Photoshop/Bridge CS5. I cannot open my raw images in Bridge. I have tried to download the plug in but does not seem to work. Please Help, I need to be able to open my raw images in Bridge ASAP. I do not want to

I recently purchased a Canon 7D. I own Adobe Photoshop/Bridge CS5. I cannot open my raw images in Bridge. I have tried to download the plug in but does not seem to work. Please Help, I need to be able to open my raw images in Bridge ASAP. I do not want to upgrade to CS6 at this time.

If you had given us sensible information, I could look it up for you if your efforts fail.
Right now, I don't even know if you are on a Mac or on a Windows box.
BOILERPLATE TEXT:
If you give complete and detailed information about your setup and the issue at hand, such as your platform (Mac or Win), exact versions of your OS, of Photoshop and of Bridge, machine specs, what troubleshooting steps you have taken so far, what error message(s) you receive, if having issues opening raw files also the exact camera make and model that generated them, etc., someone may be able to help you.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

Please help, I need to open a port...

Hello all,
I am a newbie to Solaris, I have the need to open port #36678 on a server running Solaris 8. I am sure it is simple but just do not know where to start, I have ran a netstat -a and it is not listening now.
Thank you in advance.

Hello all,
I am a newbie to Solaris, I have the need to open
port #36678 on a server running Solaris 8. I am sure
it is simple but just do not know where to start, I
have ran a netstat -a and it is not listening now.Administrators do not open ports on a machine. Applications open ports as they run.
So you would launch a program, and it would try to use the port.
Presumably you have some such program in mind?
Darren

Can anyone tell me why I am unable to download a template word doc from webmail onto my mac without it opening in text format? I just need the original document format.

Can anyone tell me why I am unable to download a template word doc from webmail onto my mac without it opening in text format? I just need the original document format.

Where to begin... and why would you ask here? (workstation owners)
Places I can think to try, after google of course....
Forum devoted to something like Word / Mactopia or Pages.... whether you are using Office 2011, and no idea what browser or webmail (IMAP, Gmail, other)
And then there really are notebook with subforum for MacBook Pro
Apple Site Map
Apple Support Mail
Apple Support

TS3274 Hi I am using iPad 2, when I tap app icon on the screen it shakes and does not open the app please advice what need to be done

Hi I am using iPad 2, when I tap app icon on the screen it shakes and does not open the app please advice what need to be done

- First try clciking the Home button one and try again.
- Next reset the iPod. Nothing is lost
Reset iPad: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Then restore from backup
- Restore to factory defaults/new iPod

TS4185 I have downloaded facetime from the App store and I keep receiving this message - An internal FaceTime error occurred. There was a problem with FaceTime. You need to quit and open FaceTime again. Please help!

I have downloaded facetime from the App store and I keep receiving this message - An internal FaceTime error occurred. There was a problem with FaceTime. You need to quit and open FaceTime again. Please help!

This error message could result from an incorrect setting for date and time, or an operating system which does not have the latest updates installed. It's a good idea to have your location setting on automatic. Turn on the wi fi in your mac for a minute or so, to allow it to automatically search for your present location. Do this even though you have the correct time Date settings displayed.

I have the iPhone 4 and I put a vanilla gift card visa on there and i used all the money on there I can't update any of my apps till I get rid of the gift car and I don't want to put another card on there please help me I just need to have the option none

I have the iPhone 4 and I put a vanilla gift card visa on there and i used all the money on there I can't update any of my apps till I get rid of the gift car and I don't want to put another card on there please help me I just need to have the option noneI have the iPhone 4 and I put a vanilla gift card visa on there and i used all the money on there I can't update any of my apps till I get rid of the gift car and I don't want to put another card on there please help me I just need to have the option none I've checked.

Need to Resume download to complete the ongoing Process.
Last Resort, put the iPhone in DFU mode (Google How to do that). Connect in iTunes. Follow on-screen prompts to Restore. All Data would be lost, if not backed up earlier.
To save the photographs you may have to use third party software. Google is your friend.

HT5616 I just NEED to know (yes or no) if I buy an "I-app" or "I-anything" (from the I-store) like the"I-cloud" will I be able to access (it?) on my windows 7 computer? PLEASE and THANKYOU

I just NEED to know (yes or no) if I buy an "i-app" or "i-anything" (from the i-store) like the"i-cloud" will I be able to access (i-it?) on my windows 7 64- bit computer? PLEASE and THANK YOU.............. z/;8?p ......... clueless and brand-new to the "i-world" ................tonniesb
While I'm admitting my ignorance of the "i-world", THE SAME QUESTION ABOVE but on my windows 7-starter mini-computer? Thanks again .....t
You smart young guys AND girls are not going to believe this next question! ! ! ! ! !
I have never owned a smart-phone. O.K.?? So having the computer systems I mentioned above, what SMART-PHONE should I really get? I do want your opinion's for the very best route to go.... ty agian ...t

No. Apps from the iTunes Store only run on iDevices like iPhones or iPads. Applications from the Mac App Store only run on Macs.

Well last night after I had got off the phone it had froze up (never happened before) and then it it went blank. I would call it from my house phone and it would ring and vibrate but nothing showed up on the screen. I just need help please :(

Well last night after I had got off the phone it had froze up (never happened before) and then it it went blank. I would call it from my house phone and it would ring and vibrate but nothing showed up on the screen. I don't know where to go from here I just need desperate help. Please and thank you!

Try doing a hard reset, Hold the "Home & Power Buttons" down at same time, until you see the Apple Icon appear. Then let go of the buttons.

Just need to get site looking right in IE6. Help please.

I am designing a new site. I have tested it in IE7, FF, Opera
and Safari. All looks fine.
In IE6 however I have a problem with my LeftMenu background
image not lining up properly with the UL background image. It is
like IE6 is not picking up the top margin of 4px from my TopList
and the TopList and Rightlist positionings are out in IE6.
To make the LeftMenu background image appear correct in IE6 I
have to add top-padding of 4px to my TopList. Doing this, however
puts the positioning out in all the other browsers.
I just need to get IE6 to display correctly and then I will
be happy! Any ideas anyone? The page does validate.
www.tomkilbourn.com/tomkilbourn/mastheadshtml

That can be a solution. Sometimes it's enough to use only
some specially adjusted styles for IE, f.i. when you need
'min-height' for a div-tag (IE doesn't understand that) you can
place css for 'height' for the same div-tag in the stylesheet for
IE.
You can call a stylesheet for IE like this, in the head
section of your page place this code:
<link href="your-basic-stylesheet.css" rel="stylesheet"
type="text/css" />

Please Help! Deadline is looming...just need a quick fix on this

Hi,
I really need a quick fix to this problem....I am a beginer in Java...
This is part of my assignment and I really need to move forward with it...I am stuck with this little problem:
You'll find below this my code...I just need to figure out why my TextFields and DropDown Menus are invisible....or not there...
Can anybody have a quick glance? thanks in advance
import java.awt.*;
import java.awt.event.*;
import java.applet.*;
import java.awt.Dialog.*;
import java.util.StringTokenizer;
public class DetailsPopup extends Dialog implements ActionListener
Dialog Details;
Dialog Confirmation;
TextField SName;
TextField FName;
TextField Email;
TextField CCard;
Choice ChoiceExpMonth;
Choice ChoiceExpYear;
Color LightBlue = new Color(180,180,255);
DetailsPopup(Frame f)
   super(f);
   Button b3; //submit
   b3 = new Button ("Submit"); //add the button "Submit"
   b3.addActionListener(this);
   Details = new Dialog(new Frame(),"Booking", false);
   Details.setSize(400, 500);
   Details.setLocation(320,240);
   Details.add("South", b3);
   Details.setResizable(false);
   Details.setVisible(true);
   Details.setBackground(LightBlue);
   setLayout( new FlowLayout());
public void init()
   add( new Label("Surname"));
   SName = new TextField(15);
   add(SName);
   add( new Label("First Name"));
   FName = new TextField(15);
   add(FName);
   add( new Label("E-mail"));
   Email = new TextField(15);
   add(Email);
   add( new Label("Credit/Debit Card"));
   CCard = new TextField(16);
   add(CCard);
   add( new Label("Expiry Date"));
   add( new Label("Month"));
   add(ChoiceExpMonth);
   int i=1;
   while (i<13)
     ChoiceExpMonth.addItem(new Integer(i).toString());
     i++;
   add(new Label("Year"));
   add(ChoiceExpYear);
   int j=2003;
   while (j<2008)
     ChoiceExpMonth.addItem(new Integer(j).toString());
     j++;
public void actionPerformed( ActionEvent e)
   String Name = "";
   String First = "";
   String Card = "";
   String Mail = "";
   String TestEmail = Email.getText();
   StringTokenizer st = new StringTokenizer(TestEmail,"@");
   if (SName.getText().length() == 0)
     Name = "bad";
   if (FName.getText().length() == 0)
     First = "bad";
   if (CCard.getText().length() != 16)
     Card = "bad";
   if (st.countTokens() != 1)
     Mail = "bad";
   if (Name.equals("bad") || First.equals("bad") || Card.equals("bad") || Mail.equals("bad"))
     Dialog Err = new Erratum (new Frame (),Name,First,Card,Mail);
   else
     Details.dispose();
     ConfirmationPopup Conf = new ConfirmationPopup(new Frame ());

well forget what i said then. I see what you are trying to do and it can be done this way but I don't really like it. My opinion however is not important yet!
I suggest you start by calling the init() method in the constructor. I don't see where you called this method and since you didn't then none of the text fields are created.
DetailsPopup(Frame f)
   super(f);
   Button b3; //submit
   b3 = new Button ("Submit"); //add the button "Submit"
   b3.addActionListener(this);
   Details = new Dialog(new Frame(),"Booking", false);
   Details.setSize(400, 500);
   Details.setLocation(320,240);
   Details.add("South", b3);
   Details.setResizable(false);
   Details.setVisible(true);
   Details.setBackground(LightBlue);
   setLayout( new FlowLayout());
   init();

PLEASE I JUST NEED TO CONFIGURE TO OPEN PORT 22

Similar Messages

Maybe you are looking for