Please I Need A Help ,

Hi , I Using Blackberry Curve 9220 ,
 , I Buy This Blackberry From Someone ,
But I Do Not Know Him , And I Never Saw Him Again ,
So The Problem Is , Enterprise Activation Password ,
Where Can I Get The Activation Password ?
I Really2 Need Help Here ,
I Cannot Open The Appworld , Bis( FB , Twitter Application , BBM )
So What Should I Do Right Now ?
Please , Help Me , I Really2 Need Your Help , Y_Y 

Hi and Welcome to the Community!
First off, if you are not an enterprise subscriber, then the Enterprise selection is not relevant to you...rather to use the proprietary BB services (including Push email capability, BBM, etc.), you must have an adequate data plan from your carrier. The carriers host BIS (BlackBerry Internet Service) for their BB users. Typically, BIS is not available via generic data plans. Many carriers call what is necessary The Blackberry Data Plan. Whatever they call it, it is the carrier who delivers BIS to their BB users -- contact them for assistance. Once you have a Push-email enabled BIS-capable data plan on your BB (at whatever fees your carrier will charge, btw), your BB-proprietary services will function (e.g., you will have Personal/Internet Email added to the email setup wizard, your BBM will function, etc).
http://www.blackberryfaq.com/index.php/What_do_I_n​eed_a_Data_Plan_for%3F
With hundreds of carriers in the world, each with dozens of different data plans, it's impossible to tell you specifically what any service plan might actually provide. Only the carriers can answer that question. The best thing to do is to decide what services you desire, and then talk to your carrier about obtaining (from them) a data plan that enables what you desire.
BUT...your potential problems do not end there (they may not even start there!!). See this:
B05099 Steps to take before selling or after buying a previously owned BlackBerry smartphone
If the person who sold it to you did not properly complete ALL of the SELLER steps, you may never be able to get this BB working on any network. Further, it is completely possible that the BB is reported as lost or stolen, which will preclude its functionality for ever.
So, here's some more information for you...
Any BB can be used on any carrier that runs the same radio frequencies that the BB is capable of (and I've no idea if your's are such). But, to bring a BB onto a carrier network that they did not sell to you, there are several hurdles to cross:
1) The carrier must say "yes" to the fact...they own their network and have every right to say what devices will be allowed to connect to it. If they say "no", then that's the end of it.
2) You must be sure that your BB is properly unlocked from it's originally manufactured-for carrier...see this helpful thread for details:
http://supportforums.blackberry.com/t5/General-Bla​ckBerry-Functions-and/Unlocking-your-BlackBerry-Gu​...
3) You must get all of your voice level services functioning on the carrier, before you even try anything about data
4) You must subscribe, from the carrier, to an adequate data plan to enable the BB-proprietary services you desire
5a) If the carrier directly supports your specific model BB, then you can proceed with registering the BB onto their network, generating the proper Service Book delivery to your BB, and proceeding to function.
5b) But, if the carrier does not directly support your specific model number of BB, then the challenges are much greater as most carrier systems will not deliver, to the BB, the necessary service books to enable the BB-proprietary data services, even if you do subscribe to them.
So, depending on all of that, your BB may or may not ever fully function on that carrier network. It can be quite tricky to accomplish, especially if 5b applies. So take a look at all of that and decide how you wish to proceed. Most folks wind up just buying a new BB if 5b applies.
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4   Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA   Display/Scan Bar Code

Similar Messages

  • I want to get iBook, Facebook and Skype to my iphone 4.2.1 through my iTune, but I coudn't because it is said that it requires a newer version of iOS. Please I need your help. Thanks

    I want to get iBook, Facebook and Skype to my iphone 4.2.1 through my iTune, but I coudn't because it is said that it requires a newer version of iOS. Please I need your help. Thanks

    If your iPhone can't be updated to a higher iOS version then the only way to get them is if you downloaded versions of them which were compatible with iOS 4.2.1 and you still have copies of those versions somewhere e.g. on your computer or on a backup - only the current version of each app is available in the store, and as apps (and other content) are tied to the account that downloads them, you will need to have older copies that are linked to your id

  • HT4759 Please I need a help I cannot backup my ipad and can not get into the icloud storage.  What would I do to get into my ipad?  please I need your help

    Please I need a help.  I cannot backup my ipad and can not get into the iclous storage to delet them, because its read icloud storage is full.  Please do you have a knowledge of how I can get rid of the message and get into the ipad?

    Welcome to the Apple Community.
    You might try a forced shutdown to begin with, hold down the top and home buttons together until the device shuts down, then restart it.

  • Hi, my iphone its in recovery mode and when i restore my iphone 5s loading show the blue screen and show note on itunes (unknown error 14) please i need your help please . thanks

    Hi, my iphone its in recovery mode and when i restore my iphone 5s loading show the blue screen and show note on itunes (unknown error 14) please i need your help please . thanks

    In the article Resolve iOS update and restore errors this is what it says about error 14:
    Check your USB connections
    Related errors: 13, 14, 1600, 1601, 1602, 1603, 1604, 1611, 1643-1650, 2000, 2001, 2002, 2005, 2006, 2009, 4005, 4013, 4014, or “invalid response."
    If the USB connection between your device and computer is interrupted, you may be unable to update or restore.
    To narrow down the issue, you can also change up your hardware:
    Use the USB cable that came with your device, or a different Apple USB cable.
    Plug your cable into a different USB port directly on your computer. Don't plug it into your keyboard.
    Try a different computer.
    If necessary, resolve any further issues with the USB connection, then with your security software.
    If you're still seeing the error message, check for hardware issues by following the next section.

  • HT5625 please i need a help, a cant afford to buy new iphone, i bought pairly used in the market here in khartoum Sudan, mistakenly i reset it where i realised that i cannot use it again because it was linked to an apple id, and i dont know the person.

    please i need a help about how to use my iphone again, i bought pairly used, mistakenly i reset it and then i realised that it was linked to another persons id and password which i dont know or how to contact the person, and still i cant evan see the full email adress of the person which i think i could have contact him directly. so does that means i can no more longer use the phone again? please i need help, am a student from khartoum sudan.

    profuhassan wrote:
    please i need a help about how to use my iphone again, i bought pairly used, mistakenly i reset it and then i realised that it was linked to another persons id and password which i dont know or how to contact the person, and still i cant evan see the full email adress of the person which i think i could have contact him directly. so does that means i can no more longer use the phone again? please i need help, am a student from khartoum sudan.
    That is correct, you now have a paperweight.  Unless you can get a hold of the orignal owner.

  • HT201210 please,I need your help ! I was updating my iphone ios to ios4.2 and then problems begins when it shows that it needs to restore the factory software to I was trying to restore ,but that didn't happen it begins but then it shows unknown error 101

    please,I need your help ! I was updating my iphone ios to ios4.2 and then problems begins when it shows that it needs to restore the factory software to I was trying to restore ,but that didn't happen it begins restoring but then it shows unknown error 1015

    Stop being impatient.
    From the article that the question was posted from:
    Errors related to downgrading iOS
    The required resource cannot be found: This alert message occurs when your device has a newer version of iOS than what is available in iTunes. When troubleshooting a device that presents this alert message, go to Settings > General > About and check the version of iOS on the device. If it is newer than the latest released iOS version, the device may have a prerelease developer version of iOS installed.   Installing an older version of iOS over a newer version is not supported.
    Error 1015: This error is typically caused by attempts to downgrade the iPhone, iPad, or iPod touch's software. This can occur when you attempt to restore using an older .ipsw file. Downgrading to a previous version is not supported. To resolve this issue, attempt to restore with the latest iPhone, iPad, or iPod touch software available from Apple. This error can also occur when an unauthorized modification of the iOS has occurred and you are now trying to restore to an authorized, default state.
    You cannot downgrade.
    If you have a 3GS, you can only install iOS 6.1.3 which is the current version of iOS for the device.

  • This website make problem for me, he open by it self everytime i try to open another websites  Please i need some help

    this website make problem for me, he open by it self everytime i try to open another websites
    Please i need some help
    http://yandex.ru/yandsearch?text=ццц&lr=1004

    Dude, I don't think there's a user on this forum that would click on that link.

  • Hi, Someone Know why my charger is not working properly but always it was been working good but now when conect my iphone (3gs) shows a yellow triangle saying : Charging is not supported with this accessory. Please I need some help here. Thanks =D

    Hi Someone Know why my charger is not working properly but always it was been working good but now when conect my iphone (3gs) appears a golden triangle saying :Charging is not Supported with this accessory. Please I Need Some Help Here. Thanks =D

    sounds like the cable or the iphone connector are somehow damaged

  • Please i need a help in updating my nokia 5800

    Hello everybody
    please I need a help
    when i am updating my nokia in to v40 from v21 using nokia update software it begins downloading but when it reaches 20 mb it returns a lot of times at last it said you have a low internet connectivity
    otherwise when i enter *#0000# and check for updates they said no updates are found
    what is the solution of my problems I have still try updating for more than 5  days but nothing has been changed.
    Can a body upload the update in others serves espically in mediafire sinnce mediafire is the best site for me to download from? please I need the update since my nokia now is slow and after update it will have new things and ofcourse will be speed up.
    please can anyone upload it using www.mediafire.com and thanks so much
    I want it quickly, and only mediafire for downloading working on my bad internet connectivity

    For performing a firmware update you need an high speed internet connection i dont know whats the speed of internet connection you are using, in this case you can go to nokia care point and get it updated. Thats safe and you won't brick your phone too. Firmware updates can be done only through nokia software updater application and through the phone(fota)by the end user and there is no way to put the update file to some place or server like what you asked for.
    If a reply has solved your problem click Accept as solution button, doing it will help others know the solution. Thanks.

  • Help please am useing an Iphone 3gs after i restore the iOS device restart my phone can not Activate it.. what do i do please i need your help.?

    Help please am useing an Iphone 3gs after i restore the iOS device restart my phone can not Activate it.. what do i do please i need your help.?

    Usually indicitive of a phone that's been jailbroken or hacked to unlock it, something of which you will net get support for here.

  • Please , i need youre help ! im from Mexico and i dont speak inglish well but ill try explain me... i buy a cs5 students edicion but i lost my paswoord for the instalacion can you helpe me ? how can i recuperade my paswoord

    please , i need youre help ! im from Mexico and i dont speak inglish well but ill try explain me... i buy a cs5 students edicion but i lost my paswoord for the instalacion can you helpe me ? how can i recuperade my paswoord
    Creative Suites

    Find your serial number quickly
    Mylenium

  • HI ALL SINCE TWO DAYS I AM DOWNLOADING VIBER BUT I AM NOT HAVING MY ACCESS CODE AND EVERY TIME I DELETE THE APPLICATION AND DOWNLOADING IT AGAIN BUT ALWAYS THE SAME RESULT PLEASE I NEED YOUR HELP FOR THE ACCESS CODE.MY PHONE NUMBER IS 0022996969896.THANKS

    HI ALL SINCE TWO DAYS I AM DOWNLOADING VIBER BUT I AM NOT HAVING MY ACCESS CODE AND EVERY TIME I DELETE THE APPLICATION AND DOWNLOADING IT AGAIN BUT ALWAYS THE SAME RESULT PLEASE I NEED YOUR HELP FOR THE ACCESS CODE.MY PHONE NUMBER IS 0022996969896.THANKS IN ADVANCE

    try this website this should help you http://helpme.viber.com/index.php?/Knowledgebase/List/Index/1/iphone

  • Hey guys i please i need a help on my ipad. i have received an ipad from anonymous person but she has already logged in to iclouds, since i dont know her password how do i sign out without using password on ios 8?

    Hey guys i please i need a help on my ipad. i have received an ipad from anonymous person but she has already logged in to iclouds, since i dont know her password how do i sign out without using her password on ios 8?

    You can't. Your mysterious benefactor must remove the device from her (I guess you know it's a her?) iCloud account by logging into icloud.com, going to Find my iPhone and removing from there.
    Matt

  • How to get app.processId from Guided Procedures? Please I need You help

    Hi everyone, I need your help, I need to recover the processId once time the Procees was started in Guided Procedures
    I found this link from maintenance process in Guided Porcedures administration
    http://host:port/webdynpro/dispatcher/sap.com/cafeugpui~rt/Runtime?app.processId=IDnumber
    the parameter I need is IDnumber, I dont know if it is possible with web dynpros or with web services please I need you help
    How Can I do this?
    Thank you very much my friends
    Regards from Mexico
    Atte Israel

    Hi,
    I am not sure about the version. But you can follow the steps below.
    1. Create a Web Dynpro Poroject (Ideally create a DC , but if you don't have NWDI setup a project will do).
    2. Add reference to com.sap.security.api.jar and sap.comcafeugpapi.jar
    3. Under WebDynpro References -> Library References add sap.com/cafeugp~api
    4. Put following code in wdDoInit()
    public void wdDoInit()
        //@@begin wdDoInit()
         IGPRuntimeManager rtm = GPProcessFactory.getRuntimeManager();
         IWDMessageManager msgMgr= wdComponentAPI.getMessageManager();
         try{
         IWDClientUser wdUser = WDClientUser.getCurrentUser();
         IUser user = wdUser.getSAPUser();
         IGPUserContext userContext = GPContextFactory.getContextManager().createUserContext(user);
         Date startDate = new Date(110,1,1); // Start date as 01-Jan-2010
         Date endDate= new Date(111,12,31); // End date as 31-Dec-2011
         IGPProcessInstanceInfo[] array = rtm.getRunningInstances(GPSearchRole.SEARCH_ROLE_OWNER, startDate, endDate, userContext);
         for (int i=0; i<array.length; i++){
         String instanceId = array<i>.getProcessInstanceID();
    //        Write logic to pass the instance ID to the RFC
    msgMgr.reportSuccess("Instance id =" + instanceId);
         catch(Exception ex)
         msgMgr.reportException(ex.getLocalizedMessage(),false);     
        //@@end
    Let me know if you face any issues.
    Thanks
    Prashant

  • HT4097 please my ipad in recovery mode after last update and i tried the previous steps and it is same condition in recovery mode please i need your help

    please i need your help i made update to my ipad to the last version then i find it in recovery mode and tried to restore it using i tunes but it the same in recovery mode please i need your help to solve this problem

    If you followed these instructions and you were unable to enter recovery mode, I'm still leaning toward a hardware problem.  Also, since you have IOS-7, read this.  It might help.

  • Please I need some help with a table

    Hi All
    I need some help with a table.
    My table needs to hold prices that the user can update.
    Also has a total of the column.
    my question is if the user adds in a new price how can i pick up the value they have just entered and then add it to the total which will be the last row in the table?
    I have a loop that gets all the values of the column, so I can get the total but it is when the user adds in a new value that I need some help with.
    I have tried using but as I need to set the toal with something like total
        totalTable.setValueAt(total, totalTable.getRowCount()-1,1); I end up with an infinite loop.
    Can any one please advise on some way I can get this to work ?
    Thanks for reading
    Craig

    Hi there camickr
    thanks for the help the other day
    this is my full code....
    package printing;
    import java.awt.*;
    import java.awt.event.*;
    import java.awt.print.*;
    import javax.swing.*;
    import javax.swing.table.*;
    import java.text.DecimalFormat;
    public class tablePanel
        extends JDialog  implements Printable {
      BorderLayout borderLayout1 = new BorderLayout();
      private boolean printing = false;
      private Dialog1 dialog;
      JPanel jPanel = new JPanel();
      JTable table;
      JScrollPane scrollPane1 = new JScrollPane();
      DefaultTableModel model;
      private String[] columnNames = {
      private Object[][] data;
      private String selectTotal;
      private double total;
      public tablePanel(Dialog1 dp) {
        dp = dialog;
        try {
          jbInit();
        catch (Exception exception) {
          exception.printStackTrace();
      public tablePanel() {
        try {
          jbInit();
        catch (Exception exception) {
          exception.printStackTrace();
      private void jbInit() throws Exception {
        jPanel.setLayout(borderLayout1);
        scrollPane1.setBounds(new Rectangle(260, 168, 0, 0));
        this.add(jPanel);
        jPanel.add(scrollPane1, java.awt.BorderLayout.CENTER);
        scrollPane1.getViewport().add(table);
        jPanel.setOpaque(true);
        newTable();
        addToModel();
        addRows();
        setTotal();
    public static void main(String[] args) {
      tablePanel tablePanel = new  tablePanel();
      tablePanel.pack();
      tablePanel.setVisible(true);
    public void setTotal() {
      total = 0;
      int i = table.getRowCount();
      for (i = 0; i < table.getRowCount(); i++) {
        String name = (String) table.getValueAt(i, 1);
        if (!"".equals(name)) {
          if (i != table.getRowCount() - 1) {
            double dt = Double.parseDouble(name);
            total = total + dt;
      String str = Double.toString(total);
      table.setValueAt(str, table.getRowCount() - 1, 1);
      super.repaint();
      public void newTable() {
        model = new DefaultTableModel(data, columnNames) {
        table = new JTable() {
          public Component prepareRenderer(TableCellRenderer renderer,
                                           int row, int col) {
            Component c = super.prepareRenderer(renderer, row, col);
            if (printing) {
              c.setBackground(getBackground());
            else {
              if (row % 2 == 1 && !isCellSelected(row, col)) {
                c.setBackground(getBackground());
              else {
                c.setBackground(new Color(227, 239, 250));
              if (isCellSelected(row, col)) {
                c.setBackground(new Color(190, 220, 250));
            return c;
        table.addMouseListener(new MouseAdapter() {
          public void mouseClicked(MouseEvent e) {
            if (e.getClickCount() == 2) {
            if (e.getClickCount() == 1) {
              if (table.getSelectedColumn() == 1) {
       table.setTableHeader(null);
        table.setModel(model);
        scrollPane1.getViewport().add(table);
        table.getColumnModel().getColumn(1).setCellRenderer(new TableRenderDollar());
      public void addToModel() {
        Object[] data = {
            "Price", "5800"};
        model.addRow(data);
      public void addRows() {
        int rows = 20;
        for (int i = 0; i < rows; i++) {
          Object[] data = {
          model.addRow(data);
      public void printOut() {
        PrinterJob pj = PrinterJob.getPrinterJob();
        pj.setPrintable(tablePanel.this);
        pj.printDialog();
        try {
          pj.print();
        catch (Exception PrintException) {}
      public int print(Graphics g, PageFormat pageFormat, int pageIndex) throws PrinterException {
        Graphics2D g2 = (Graphics2D) g;
        g2.setColor(Color.black);
        int fontHeight = g2.getFontMetrics().getHeight();
        int fontDesent = g2.getFontMetrics().getDescent();
        //leave room for page number
        double pageHeight = pageFormat.getImageableHeight() - fontHeight;
        double pageWidth =  pageFormat.getImageableWidth();
        double tableWidth = (double) table.getColumnModel().getTotalColumnWidth();
        double scale = 1;
        if (tableWidth >= pageWidth) {
          scale = pageWidth / tableWidth;
        double headerHeightOnPage = 16.0;
        //double headerHeightOnPage = table.getTableHeader().getHeight() * scale;
        //System.out.println("this is the hedder heigth   " + headerHeightOnPage);
        double tableWidthOnPage = tableWidth * scale;
        double oneRowHeight = (table.getRowHeight() +  table.getRowMargin()) * scale;
        int numRowsOnAPage = (int) ( (pageHeight - headerHeightOnPage) / oneRowHeight);
        double pageHeightForTable = oneRowHeight *numRowsOnAPage;
        int totalNumPages = (int) Math.ceil( ( (double) table.getRowCount()) / numRowsOnAPage);
        if (pageIndex >= totalNumPages) {
          return NO_SUCH_PAGE;
        g2.translate(pageFormat.getImageableX(), pageFormat.getImageableY());
    //bottom center
        g2.drawString("Page: " + (pageIndex + 1 + " of " + totalNumPages),  (int) pageWidth / 2 - 35, (int) (pageHeight + fontHeight - fontDesent));
        g2.translate(0f, headerHeightOnPage);
        g2.translate(0f, -pageIndex * pageHeightForTable);
        //If this piece of the table is smaller
        //than the size available,
        //clip to the appropriate bounds.
        if (pageIndex + 1 == totalNumPages) {
          int lastRowPrinted =
              numRowsOnAPage * pageIndex;
          int numRowsLeft =
              table.getRowCount()
              - lastRowPrinted;
          g2.setClip(0,
                     (int) (pageHeightForTable * pageIndex),
                     (int) Math.ceil(tableWidthOnPage),
                     (int) Math.ceil(oneRowHeight *
                                     numRowsLeft));
        //else clip to the entire area available.
        else {
          g2.setClip(0,
                     (int) (pageHeightForTable * pageIndex),
                     (int) Math.ceil(tableWidthOnPage),
                     (int) Math.ceil(pageHeightForTable));
        g2.scale(scale, scale);
        printing = true;
        try {
        table.paint(g2);
        finally {
          printing = false;
        //tableView.paint(g2);
        g2.scale(1 / scale, 1 / scale);
        g2.translate(0f, pageIndex * pageHeightForTable);
        g2.translate(0f, -headerHeightOnPage);
        g2.setClip(0, 0,
                   (int) Math.ceil(tableWidthOnPage),
                   (int) Math.ceil(headerHeightOnPage));
        g2.scale(scale, scale);
        //table.getTableHeader().paint(g2);
        //paint header at top
        return Printable.PAGE_EXISTS;
    class TableRenderDollar extends DefaultTableCellRenderer{
        public Component getTableCellRendererComponent(
          JTable table,
          Object value,
          boolean isSelected,
          boolean isFocused,
          int row, int column) {
            setHorizontalAlignment(SwingConstants.RIGHT);
          Component component = super.getTableCellRendererComponent(
            table,
            value,
            isSelected,
            isFocused,
            row,
            column);
            if( value == null || value .equals("")){
              ( (JLabel) component).setText("");
            }else{
              double number = 0.0;
              number = new Double(value.toString()).doubleValue();
              DecimalFormat df = new DecimalFormat(",##0.00");
              ( (JLabel) component).setText(df.format(number));
          return component;
    }

Maybe you are looking for

  • ASSET problem in the Purchase Order

    Hi Guys, I have a trouble with creating the purchase order. In my purchase order I have selected Account Assignment Category as 'Asset-A' and system prompting me to enter ASSET in the item details tab for  Account assignment. So how to create the Ass

  • Vendor ledger/ header layout

    HI EXPERTS ! The transaction code for the report we generate is FBL1N   -  vendor ledger. we require the vendor's bank detail in this report at the header  i.e. vendor bank name , account no..(change layout of report for output ) this detail can be s

  • Max NAD devices supported in ISE 1.3

    Hello Experts, Any information regarding ISE 1.3 max supported network devices?

  • Create button in Device Configuration

    Hi ALL We are not getting the Create, Delete, Copy button in Device Configurations in Mobile Administrator web Console. Any idea how to get the missing buttons? Regards Manish

  • WiFi sync: iPad 3 works, iPhone 4 is not detected, both on iOS 5.1.1

    I recently realized that my iPhone isn't showing up in iTunes for wifi sync. I tried plugging it directly into my macbook, but that actually made it stop charging from my Mophie battery case and still didn't let the phone show in the devices panel (I