PLease I need "electric drum" help for set-up

I am trying out an electric drum set. I tried going into my pre-amp then into GB, but it was just the "trigger" noise.
I then was given a Yamaha PTX8 Percussion Tone Geneator box to create the sounds, however I know nothing about the box and it is not producing good "user-ability" for us.
Is there not a way to just go from the "drum" into the pre-amp, (by passing the Yamaha box)?
Can garage band not simulate what the box is doing, is there not a way to set a snare in GB for the "snare" electric drum?

You seem to be talking about two completely different things.
If you're going through a preamp, you're recording audio, but it sounds like you think you're triggering MIDI events.
If you're going through a preamp, then you'd want to create a New Basic Track in GB to record the sound you're sending to GB.
Also:
http://www.thehangtime.com/gb/gbfaq2.html#recordlinein

Similar Messages

Kindly advice me, I have iphone 5s and I forgot the log-in password (passcode), I tried to open it but my phone give 60 min. to let me try after I fail for first one. I dont sync. with icloud or itunes. Please I NEED YOUR URGENT HELP!!

Kindly advice me, I have iphone 5s and I forgot the log-in password (passcode), I tried to open it but my phone give 60 min. to let me try after I fail for the first one. I dont sync. with icloud or itunes. Please I NEED YOUR URGENT HELP!! MY IPHONE IS STILL STUCK.

I can't, look at this image

None of the network adapters are bound to the Netmon driver.If you have just installed, you may need to log out and log back in order to obtain the proper rights to capture. Please refer to the product help for more information.

Hi,
To analyze Lync issues I have installed these applications in my windows 7 x64 laptop
1) network monitor 3.4
2)Lync network monitor parser
3)nmdecrypt2.3
4)network monitor parser3.4
Installtion got completed successfully but when I try to start capture I get this error everytime.......
"None of the network adapters are bound to the Netmon driver.If you have just installed, you may need to log out and log back in order to obtain the proper rights to capture. Please refer to the product help for more information"
I read many technet articles and other blogs but that didn't solve this issue. I tried things like
A) Run as administrator
B) nmconfig /install in cmd
So could you please help me how I can fix this issue?
Regards,
Ajit

Seems our driver didn't get installed. What you see when you type "sc query nm3" from a command prompt?
Thanks,
Paul

Already have wireless network, need help for set up of time capsule for wired backup only.

Hello all -
I have a time capsule that plugs into wall and used a wireless network to back up computer. It would always mess up internet afterwards so I would unplug the time capsule and reset internet until the next back up. my time capsule now will not link into my computer. It just flashes amber. Spoke with apple and was told to come on here and ask for help for setting up time capsule for a wired backup only and to mention that I have a wireless network.
Hope any of this makes sense.
Thank You!!

Spoke with apple and was told to come on here and ask for help
Really? The paid professionals at Apple told you to post on a forum where users.....just like you....are trying to answer questions? We'll try to help, though.
For starters, please tell us the make and model of the modem/router that you have now that is providing your wireless network.

How do you get around needing a credit card for setting up family sharing?

How do you get around needing a credit card for setting up family sharing?

khuerter wrote:
I appreciate the replies about needing to setup a credit card for agreeing to pay for purchases and letting someone else be the Family Organizer. The purpose of my question is to know if there is a way around apples requirement to have a valid payment method on file...we have money in our apple account (use iTunes gift cards) and I do not want to store my CC info at apple. It seems like very odd that money in your account would not be enough to setup Family Sharing.
Very frustrating and just about ready to get rid of all the 15 apple products we currently have.
Khuerter,
Having a credit card when you set up as Family Organizer is a legal requirement to prove that you are taking financial responsibility for the others on the account. As Gail noted, there is not a way around that.
Once the account is set up, the Family Organizer can remove the credit card and replace it by a debit card.

I tried to restore my new ipad in my itunes but it keeping restore it to my old ipad. I did delete also all my backups in the iTunes, still the same problem is showing??? please I need a huge help to have my new iPad as I bought it???

i tried to restore my new ipad in my itunes but it keeping restore it to my old ipad. I did delete also all my backups in the iTunes, still the same problem is showing??? please I need a huge help to have my new iPad as I bought it???

pleeeeeeeeeeeeeeeeeeeeeeese I need an URGENT help,,, someone answer me back

Need PP Functional help for some legacy fields

Hi all,
I am a BW consultant. I need to replicate in SAP-BW some reports that are currently in a legacy system (non SAP). I have identified the functional area for those reports as PP. I need a little functional help from you guys to find out what some fields in the legacy system mean in SAP. Once I know the R/3 fields (and source tables if someone can tell me), I can move forward with mapping those fields into BW objects and the rest of the process.
The reason why I am seeking help from here is, unfortunately our functional team is not available right now and their availability is indefinite. So I just want to keep myself busy till they are back.
Well, here are the fields that I need help for (for now)
The report is for Daily summary of activities at a plant
Work order process
Work order type
Daily Created Bags
Daily Capacity Bags (Bags per Hour Rate* Available Hours)
Daily Count of Work Order Number
Goods issued for work order completion
Goods finished
Please help me identify what R/3 fields (and their tables) correspond to the above legacy fields
Points WILL be assigned for helpful answers
Thank you

Hi,
Work order process - I assume this is the set of operations for the order - AFVC (table)
Work order type - AUFK - (Field) AUART data needs to be fetched for AUFNR(Work order number)
Daily Created Bags - MSEG - data needs to be fetched for BWART = 101 or 102 and AUFNR(Work order number)
Goods issued for work order completion - MSEG- data needs to be fetched for BWART = 261 and AUFNR(Work order number)
Goods finished - MSEG - data needs to be fetched for BWART = 101 or 102 and AUFNR(Work order number)
Regards,
Prasobh

Getting help for setting up a "good" network

Hi all,
I've been "managing" our network and doing the IT stuff even though I'm not a "true" IT guy, just a graphic artist dabbling in the stuff. I want to get some help on moving our multiple public IP address network to a more secure single Public IP address. I don't know where I can get that help so I'm taking my chances here even though this is not specific to Apple server.
Here's the equipment we have:
Apple Extreme dual band
Apple Server 10.6.3 for file services, iCal, iChat, DNS, Open directory, Address book, Web.
FTP server using CrushFTP on a Mac Pro running 10.6.3
Two ADSL modem from same ISP, one 16 Mbps the other 10 Mbps
a Peplink Balance 310 for load balancing the traffic (and it's not working as advertised as far as I could configure it.
30 static IP addresses hooked to the 16Mbps modem/router
a gigabit switch ASANTE Intracore IC36240
a 100 mbs switch ASANTE intracore 3524
I'd also like to be able to log into any machine remotely with ARD. Right now, it's a peace of cake with everyone having it's own public IP address, but how will I make this work with DHCP? I'd also like to be able to have VPN enabled.
I have no idea how to make the best of this equipment so if you have any insight or know where I can get some help to set that up, that'd be great!

There are as many 'good' networks as there are network requirements and hardware combinations.
Get a server-grade firewall, if that peplink router can't provide that function.
Figure out what's up with the peplink router.
If the peplink isn't working and if it doesn't have firewall capabilities (I've not read the specs), I'd replace it with a firewall with dual uplinks.
Once you get DHCP going, you'll have two IP subnets, and you'll have to set up subnet routing for your gear. Other than that (and with that external server-grade firewall), the remote connections are straightforward.
The server-grade firewall should have VPN end-point servers for pptp and l2tp, and probably ssl, and probably a DMZ. RADIUS support, likely. For this case, dual uplinks and support for running both.
Stay out of 192.168.0.0/16 for your private stuff.
I'd likely set up the public static IP for the router, the DMZ, and key stuff that needs to be public facing. I might well run the rest of the stuff in a private IP block.
None of which involves Mac OS X.

Please, We need a new iOS for our ipod nano gen 6, with appearance like iOS 7

We need a new iOS for our iPod nano gen 6, with new functions and appearance. Please don`t forget it.

The Nano's do not run iOS.

How to set up VPN using MAC OSX 10.4.11, Please help I need someone to help me set up VPN using regular DSL connection on my home so someone can help me troubleshoot my XSAN system remotely. THANKS

Hello,
I'm having trouble setting up a VPN using MAC OSX 10.4.11 Server. I have and XSAN system and one of my volumes has been down for quite a while now. There is a very kind MAC IT professional that is willing to help be troubleshoot my system but he needs to be able to access my system remotely. I am able to connect the MDC to DSL but I haven't been able to set up the VPN. Please help, this is an emergency. Thanks!
Marco

have you forwared the ports on your router? Why not let him in via teamviewer? its free and mac compatable

Need Step-By-Step for help for setting up accruals for online payslip.

Thank you in advance for any help you are able to provide.
I am attempting to setup accruals to show on the online payslip in 11.5.10.2. I have read through the documentation and followed the steps, however the vacation accruals continue not to show on the online payslip. Consultants implemented this system originally but did not setup vacation accruals to show on the online payslips. Online Payslips are working, but the accruals are not showing, they were never set up to.
We have done the following:
-US Super HRMS Manager-Work Structures- Organization- Description
-Selected our Organization- Others- Payslip Information
-Under Additional Organization Information- Setup the vacation accrual as:
Type: Element
Element Name: Vacation accrual
Input Value: Hours
Display Name: Vacation accrual
-We have run a payroll in TEST and viewed the online payslip for an employee, but the vacation accrual portion does not show.
Are there additional steps I am missing?
Thank You!
Keisha

You don't say which router you use but I guess it is not a VLAN Router. The SRW is a L2 switch. It separates VLANs on ethernet level. If you want to make some sense out of that you'll need a VLAN router or L3 switch to which you trunk all those VLANs and which routers the traffic to the internet and between the VLANs. The SRW cannot do that. It separates the VLANs but it cannot join them or route traffic between them. Routing is a task of a router or L3 switch.

Need urgent Help for setting up iCal Server

I will move the iCal portion here, maybe I will get some help.
Okay first my setup:
Two XServe with the latest 10.5 (one is the backup)
Six Mac Pros with Leopard
Three Macbook Pros with Snow Leopard
All Macs are on an Windows 2003 Active Directory network. Also we have our accounts locally (on each workstation and laptop).
*So I have installed the advanced settings for the Server OS.
*Created a account for every user on the server
*The FTP, Web (for the local webpage), Open Directory and iCal services are on. (iCal would only activate with Open Directory service??)
*The iCal server destination (for the calendars) are on a separate drive with +Ignore Permissions+
Still can not link a account through iCal with the server!
Could somebody give me a walkthrough how to setup the iCal server?
Oh yeah another issue I had I can't get the calendaring checkbox in the user account to stick! Is this just a bug?

Hi Umesh,
I would not use the repository on a database that was cloned. In my experience this leads to problems.
A better way is to clone the database and then create a new repository on the clone:
1. export the repository on the windows server to an mdl file
2. unregister all target users on solaris
3. drop the repository on solarais
4. create a new repository on solaris
5. Import the data from the mdl file you exported in step 1
6. register target users
7. configure and register the locations
This way requires some manual work, but I do not see another way.
Regards,
Carsten.

I Need Help For Setting Up A New Account

So, obviously in Mail, I have my .Mac Account. I would also like to add my MSN hotmail account. There are only a couple of issues. I can't figure out if the hotmail account is POP, IMAP, or Exchange. And on top of that, I don't know what to put after I've chosen one. There is a space where I'm supposed to put the "Incoming mail sever", except, I have no idea what that is. If it is relevant, my hotmail email is: [email protected]
Thank You

http://versiontracker.com/dyn/moreinfo/macosx/18189
was the solution I used to use, back when I thought it was still a good idea to use msn/hotmail

Help for set classpath

Dear Sir \ Madam
I have download javamail-1.4.zip and jaf-1.1.zip from sun at c:\j2sdk1.4.1 directory
Then I extract these files in same directory with folders javamail-1.4 and jaf-1.1. These folders have mail.jar and activation.jar file
I am confused to set correct path
Please help me

You could have looked into installation instructions bro!
anyways classpath looks like this
C:\j2sdk1.4.1_03\jre\lib\rt.jar;.;%classpath%;C:\Tomcat 4.1\common\lib\servlet.jar;
Give your jar file location after lib. Set the PATH variable too, which would look similar to this:
C:\j2sdk1.4.1_03\bin;C:\Tomcat 4.1\common\lib\servlet.jar;.;
You can go to
http://java.sun.com/j2se/1.3/install-windows.html
or
http://java.sun.com/j2se/1.5.0/docs/tooldocs/windows/classpath.html
for detailed notes.
Hope it helps.
Rk.

Please I need some serious help !!!

Ok, i have a problem. I have been working on for about 43
hours now lol. Im trying to load a Movie Clip from my library to my
Flash Application From. Not only that but it has to be a pop that
is dragable and has many componets that have to work. When i get my
movie clip out on the stage, the hand icon comes up and i cant
select any of my list menu componets or button and i cant get it to
drag around. Also, when i have components behind my movieclip they
still function even behind it and the combo boxes come strait
through it, how do i keep that from happening. What do i need to do
or better yet, how do i need to do it. Im out of ideas and i need
this working so i can move on in my project for one of my clients.
Please, any help would be appreciated. Joey ^.^

My itunes library is on a drive we call "Mybook".
My purchases however kept showing up within a different drive the C Drive.
Usually my dad would just copy all my songs and paste them back onto the Mybook drive, if he had to reformate, but he didnt b/c we didnt realize that my purchased songs were being put on the cdrive and not the mybook drive.
When I purchase the songs I use an AOL screen name, nothing through apple.
I"m not sure if i'm answering your question correctly or not.
We also werent sure what computers it was talking about when we were trying to "deauthorize".
But I didnt notice when we played around with purchasing, that when it was trying to finish a song that I purchased it had my old playlist of purchases but I couldnt click on them or anything, its like they were blocked.

PLease I need "electric drum" help for set-up

Similar Messages

Maybe you are looking for