Please i need help for Webutil Package

Please I need help Friends .
I have already installed oracle developer 10g . and i don't know how to configure and use WEBUTIL Package .
So , please anyone tell me how to Configure this package to be ready to use > Step By step Please .
Thank You

Hello,
The step by step installation guide is available in the /webutil folder of your Developer Suite installation.
Francois

Similar Messages

Hi, please I need help for n500

Hello, I have a notebook Lenovo 3000 n500 4233-3hs and I had format the notebook for install windows vista 64 Bits. now I don´t find the video and BIOS drivers for this system. please cand you help me with that...
thnks

Click here for the chipset driver.
Click here for the graphics driver.
If you aren't experiencing any problems, it's not recommended to flash the BIOS with the latest release.
\\ I do not respond to PM regarding individual tech support. Keep discussions in the forum for the benefit of others //

Please i need help for my network preferences

Hi good eve, please help me because i lost my network preferences and i cannot find any internet connection..please help me to fix it.

Are you using wireless or ethernet?
What is the main router of the network?
What Mac and OS.. your profile shows really old equipment that simply could have died??
If it is possible to plug in by ethernet please do so.. reboot the unit and see if it picks up an IP address.
No luck I need full info about the network.. what is the main modem? What is the router? What is the Mac? How is it connected?
Network preferences in the Mac itself should not really be an issue.. but if you upgraded to Yosemite expect major problems.
Did you reboot the entire network which is essential when things go wrong??

Please I need help for blackberry 10

I have blackberry 10 z and I try to restore to the Factory settings but I can't its give me the picture all time Hanging now I can't use the mobile

So I take it that you have used both suggested methods. And of course I am assuming that you have exhausted your service provider. This hanging message is strange. When you plug it in and link to link does it not give you the option to restore to factory settings? Maybe try removing the'BB Link' - un-install and then after a little while go onto the official site and reinstall it. I'm sure that you have tried a battery pull. If not then do not turn off the handset but pull out the battery in the middle of the program. Also, do the same to the PC or MAC. failing all these methods I have exhasted my knowledge in relation to restoring a phone back to factory settings. Speak to you service provider and have them send you out a new handset. I am a simple BB user. I love the phone and believe that in the future all these probs we are facing will be ironed out in time. I am sure there are other users that may be able to help you futher if my methods do not help. Let me know :-)

1.4 bug? or bad code? please I need help

FTPClient.getFile(inputStream out,String filename) works fine if inputStream is directed to an output file. I added a Thread to read inputStream using piped i/o and works fine but the thread never ends. Seems like readLine() does not return null. Please I need help.
note: FTP package located finj.sourceforge.net
import java.io.*;
import org.finj.FTPClient;
public class FTPSimpleDemo extends Object {
public FTPSimpleDemo ( String server,
String user,
char[] password ) throws Exception {
PipedOutputStream pipeOut = null;
PipedInputStream pipeIn = null;
Thread reader = null;
FTPClient client =
new FTPClient(server,user,password);
//download file
try {
pipeOut = new PipedOutputStream();
pipeIn = new PipedInputStream(pipeOut);
reader = new PipeIn(pipeIn);
reader.start();
client.getFile(pipeOut, "J_Event.txt");
while(reader.isAlive() ||
!reader.isInterrupted));
pipeOut.close();
pipeIn.close();
client.close();
}catch(IOException e){e.getMessage();}
finally {reader=null;}
public static void main ( String[] args ) throws Exception {
new FTPSimpleDemo(args[0], args[1],
args[2].toCharArray());}
class PipeIn extends Thread {
private InputStream in;
private String str;
public PipeIn(InputStream in) {this.in = in;}
public void run() {
try {
BufferedReader br = new BufferedReader(
new InputStreamReader(in));
while ((str=br.readLine()) != null)
System.out.println(str);
br.close();
}catch (IOException e) {
System.err.println(e.getMessage());}
}

Heres a tip: forget that open source library unless you need to customize it or something. Use the ftp library that comes wih the JDK. It is in an unsupported package (sun.net.ftp) check it out it couldn't be simpler:
//you need this import statement
import sun.net.ftp.*;
//here is example code
String server = "ftp.fileplanet.com";
String user = "me";
String passwd = "1234";
FtpClient client = new FtpClient();
client.openServer(server);
client.login(user, passwd);
client.binary();
client.cd("games");
//DO NOT CLOSE THIS INPUTSTREAM UNTIL YOU WANT TO CLOSE YOUR CONNECTION
TelnetInputStream in = client.get("pacman.exe");
//now do whatever u want with this inputstream
byte[] bytes = new byte[4096];
int x = 0;
while((x = in.read(bytes)) != -1)
out.write(bytes, 0, x);
_totalBytes += x;
out.flush();
out.close();Also another tip for you to write code in the forum put your code between the [ code ] [ code ] tags

If i reset my ipad can i install paye games for free if i sign back into my apple ID. Please i need help because i need to update my games but i need to put in this billing thing and i want to get rid of it so then i cant buy games with my credit card

If i reset my ipad can i install paye games for free if i sign back into my apple ID. Please i need help because i need to update my games but i need to put in this billing thing and i want to get rid of it so then i cant buy games with my credit card

Hello,
As frustrating as it seems, your best to post any frustrations about the iPhone in the iPhone discussion here:
https://discussions.apple.com/community/iphone/using_iphone
As this discussion is for iBook laptops.
Best of Luck.

When i type in my correct password on the login screen and press enter it just goes to a blue screen for a few seconds then goes back to the same login screen again, please i need help?

When i type in my correct password on the login screen and press enter it just goes to a blue screen for a few seconds then goes back to the same login screen again, please i need help?

You can take some of the steps here, #4, #5 or even trying a #18
Step by Step to fix your Mac
but I suspect your going to first have to create a data recovery drive
Create a data recovery, undelete boot drive
to get your data off the machine,
then do a #20 to eliminate the bad sectors as that's why your getting the "pinwheel" it's getting a delay reading from the drive, right when your trying to log in too, what a bad spot for it to happen.
Step by Step to fix your Mac

I have problem with buying in games , I got the massage that the purchased can not be completed , please contact iTunes support.. I need help for my case please

I have problem with buying in games , I got the massage that the purchased can not be completed , please contact iTunes support.. I need help for my case please

http://www.apple.com/support/itunes/contact/

I need help adding a mouse motion listner to my game. PLEASE i need it for

I need help adding a mouse motion listner to my game. PLEASE i need it for a grade.
i have a basic game that shoots target how can use the motion listner so that paint objects (the aim) move with the mouse.
i am able to shoot targets but it jus clicks to them ive been using this:
public void mouse() {
dotX = mouseX;
dotY = mouseY;
int d = Math.abs(dotX - (targetX + 60/2)) + Math.abs(dotY - (targetY + 60/2));
if(d < 15) {
score++;
s1 = "" + score;
else {
score--;
s1 = "" + score;
and here's my cross hairs used for aiming
//lines
page.setStroke(new BasicStroke(1));
page.setColor(Color.green);
page.drawLine(dotX-10,dotY,dotX+10,dotY);
page.drawLine(dotX,dotY-10,dotX,dotY+10);
//cricle
page.setColor(new Color(0,168,0,100));
page.fillOval(dotX-10,dotY-10,20,20);
please can some1 help me

please can some1 help meNot when you triple post a question:
http://forum.java.sun.com/thread.jspa?threadID=5244281
http://forum.java.sun.com/thread.jspa?threadID=5244277

I Need Help for the popup message every time I go to safari: "Warning! Old version of Adobe Flash Player detected. Please download new version."???

I Need Help for the popup message every time I go to safari: "Warning! Old version of Adobe Flash Player detected. Please download new version."???

If you are talking about Safari on the iPad, there is no version of Adobe Flash for iOS and there never has been. Clear Safari, close the app and reset the iPad.
Go to Settings>Safari>Clear History and Website Data
In order to close apps, you have to drag the app up from the multitasking display. Double tap the home button and you will see apps lined up going left to right across the screen. Swipe to get to the app that you want to close and then swipe "up" on the app preview thumbnail to close it.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.
If you are talking about Safari on your Mac, you are in the wrong forum. But I would still clear the cache, quit Safari and restart the Mac.

Hello, my ipad mini doent work i charged it till the next day and it didn't work i charged it again till the next day and it didn't work what should i do i didn't use my ipad for three days please i need help????

hello, my ipad mini doent work i charged it till the next day and it didn't work i charged it again till the next day and it didn't work what should i do i didn't use my ipad for three days please i need help????

Didn't work in what way. Are you unable to start it up? Does it start but then freezes? Does the screen stay black when you turn it on?
Try this - press the home and power buttons and keep pressing them until the apple logo appears.

Need help for flash builder

i need help for flash builder 4 and papervison 3d. I need to create a slider with it ranges of value from 10 to 50 to adjust the camera values for the camera.fov and also need to create it for the yaw of the object from 0 to 360. I try to look for any slider event and classes in this program but cant find any, btw, i need to use the AS only project file.
here is my codes:
can you please tell me how i should modify the codes?
package
    import flash.display.BitmapData;
    import flash.display.Sprite;
    import flash.events.Event;
    import org.papervision3d.materials.BitmapFileMaterial;
    import org.papervision3d.materials.BitmapMaterial;
    import org.papervision3d.objects.primitives.Sphere;
    import org.papervision3d.view.BasicView;
    [SWF (width="800", height="600", backgroundColor="0x000000",frameRate="30")]
    public class EarthBitmap extends BasicView
        private var sphere:Sphere;
        public function EarthBitmap()
            super(800 , 600);
            var earthmaterial:BitmapFileMaterial = new BitmapFileMaterial("../assets/Earth.jpg");
            sphere = new Sphere(earthmaterial,100,20,18);
            camera.fov = 25;
            scene.addChild(sphere);
            addEventListener(Event.ENTER_FRAME,rotateSphere);
        public function rotateSphere(evt:Event):void
            sphere.yaw(0.2);
            singleRender();

Turn the click handler into a full on separate function. Then store all the views in an array and use Math.rand() to randomly choose one.
Something like this:
<fx:Script>
     <![CDATA[
          var questionsArray:Array = {question2,question3,question5,questionRed,questionGeography};
          function buttonClickHandler(event:MouseEvent){
               var randomProblem:int = Math.floor(Math.random()*(questionsArray.length));     //generates a random integer between 0 and the total number of questions in the array (arrays are 0-based)
               navigator.pushView(questionsArray[randomProblem]);
     ]]>
</fx:Script>
<s:Button id="randomProblemButton" label="Next Problem" click="buttonClickHandler(event)" />
Haven't tested that, but something along that line should work

Need help for finding oracle payables tables

Hi,
I need help for finding tables relating fields INVOICE_ID, NOTIFICATION_ID and APPROVAL_STATUS or WFAPPROVAL_STATUS. I have searched a lot but has been unable to find any table containing all the above mentioned fields. I found the table WF_NOTIFICATIONS for INVOICE_ID, however have been unable to find the latest tables with INVOICE_ID and APPROVAL_STATUS as fields.
All the tables having this combination are either very old tables which are not used anymore or doesnt give the required data. Please let me know where am i going wrong. Once i get the required tables, i need to join the tables to get the required data with the imp fields. Also, the values of WFAPPROVAL_STATUS are not very clear to me. I need values for it as APPROVED, REJECTED AND INITIATED.

Hi Swetha,
You will have to manually make the table adjustments in all the systems using SE14 trans since the changes done using SE14 cannot be collected in any TR.
How to adjust tables :
Enter the table name in SE14. For ex for any Z master data(Say ZABCD), master data table name would be /BIC/PZABCD, text table would be /BIC/TZABCD. Similarly any DSO(say ZXYZ) table name would be /BIC/AZXYZ00 etc.
Just enter the table name in SE14 trans --> Edit --> Select the radio button "Save Data" --> Click on Activate & adjust database table.
NOTE : Be very careful in using SE14 trans since there is possibility that the backend table could be deleted.
How to collect the changes in TR:
You can collect only the changes made to the IO --> When you activate, it will ask you for the TR --> Enter the correct package name & create a new TR. If it doesn't prompt you for TR, just goto Extras --> Write transport request from the IO properties Menu screen. Once these IO changes are moved successfully, then the above proceduce can be followed using SE14 trans.
Hope it helps!
Regards,
Pavan

How can I delete my old iCloud account cause I forgot my password and my email has been block. Please I need help urgently

How can I delete my old iCloud account cause I forgot my password and my email has been block. Please I need help urgently

Contact the Apple account security team for assistance resetting your password: Apple ID: Contacting Apple for help with Apple ID account security.

My daughter has spitefully changed my password and has refused to tell me. I have so much medical information that I can not lose. Is there anyway to get around this problem. Please I need Help fast.

My daughter has spitefully changed my password and has refused to tell me. I have so much medical information that I can not lose. Is there anyway to get around this problem. Please I need Help fast.

Connect the iPod to your syncing computer and restore it via iTunes. However, if iTunes asks for the unknown passcode you need to place the iPod in recovery mode and then restore the iPod from backup. For recovey mode see:
iPhone and iPod touch: Unable to update or restore
"If you cannot remember the passcode, you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and resync the data from the device (or restore from a backup). If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present. Refer to Updating and restoring iPhone and iPod touch software."
Above is from:
http://support.apple.com/kb/ht1212

Please i need help for Webutil Package

Similar Messages

Maybe you are looking for