Please I need help with Color , really important

I just Draw a shape in Geometry and key framing and everything is good ,but as soon as I get to the secondary for set the changes everything will change !The shape will automatically change its place to couple pixel up and to the right ! my footage is in 2K red and was shot by Red Camera . I really don`t know what is the problem , any helps ?

There are no other framing/geometry issues? Can you make sure that the image is not being knocked off center-- check in the Geometry room. There has to be an offset somewhere if this is happening.
jPo

Similar Messages

I need help with color pallette in iPhoto 11. I have created a book and would like to use a different color background than those given in "background." I have found the color palettes but can't seem to incorporate them into my backgrounds palette.

I need help with color pallette in iPhoto 11. I have created a book and would like to use a different color background than those given in "background." I have found the color palettes but can't seem to incorporate them into my backgrounds palette.

That is not a feature of iPhoto - suggest to Apple - iPhoto Menu ==> provide iPhoto feedback.
Additionally I have no idea what you are saying here
I have found the color palettes but can't seem to incorporate them into my backgrounds palette.
And it always helps for you to dientify the version of iPhoto that you are using
LN

Please i need help with switch from the us store to malaysian store how i can switch

Please i need help with switch from the us store to malaysian store how i can switch

Click here and follow the instructions to change the iTunes Store country.
(82303)

Please I need help with swf folders.

Hi everybody,
I install adobe flash and when i surf on the internet it is
working. But I have a lot of swf flash folders stored in my disk c.
When I go to open them It appears like adobe flash is not install
in my disk to be able to open these files. I only can open this
files with firefox or microsoft explorer. Adobe flash is only
installed in my system and as i told you i am able to see all the
flash folders which i find on the internet when I enter to any
website with flash adobe folders. I installed and unistalled adobe
flash several times. But this is not resolved.
Please I need help.
Many thanks

Click here and follow the instructions to change the iTunes Store country.
(82303)

Need help with color management

I am looking for someone to help me. Please!
I am looking for help with Photoshop/printer not printing correct colors.
I have: Windows 7, Photoshop CS5, Photoshop Elements, HP Pavillion Laptop, new Okidata C530dn color laser printer
Previously I had a Canon Pixma MP620 and a gentleman from another forum gave me the correct settings for printing on photo paper and colors were perfect. I now have a OKIdata C530dn color laser and have started a business printing business cards and greeting cards, etc., and I do advertisements on a freelance basis.
I will be working a lot with cardstock or cover stock 65-110 lbs paper. I have an old OKIdata 2024e at work, and the colors are much better with that printer than my new personal one. I have tried matching the settings of that printer to mine to no avail. I have finally gotten the color close, but not quite. When I print on my Canon injet the colors match and print perfectly.
I have tried every setting variation that I can think of to get the color correct with my new OKIdata. I have to get the colors correct or my new business will go under because I can't match colors for my customers. I am a self taught Photoshoper and a novice so please bear with me.
Using Okidata PCL. Also have PS
Color settings in Photoshop:
North America General Purpose 2
sRGB 2.1
U.S. Web Coated Swop v2
Dot gain 20 %
Dot gain 20 %
Preserve embeded profile
Preserve embeded profile
Preserve embeded profile
engine: Adobe (ACE)
Relative Colormetric
Tried RGB color mode and CMYK color mode, no difference
Printer settings:
Photoshop manages colors
sRGB 2.1 Printer profile
Relative Colormetric
Print setup:
Letter
Multipurpose tray
Weight: printer settings-default (when I used heavy setting for cardstock it printed green instead of the color light blue, so that was a start to the right color)
Job Options:
Hight Quality
Color: No color matching
Printer preferences in Printer properties:
Color management
Device: Display 1 generic PnP monitor AMD M88og with ATI Mobility Radeon HD4200
ICC Profiles: Generic PnP Monitor (default)
Advanced:
Windows Color System Defaults:
everything under this tab is set at System Default
I have gotten the color close, but colors are dull. I have tried an adjustment layer and setting the saturation higher, but that doesn't help. I know my laptop is showing the right colors, (calibrated) because I am still printing to the Canon with cardstock and the colors are perfect using the same settings above.
Tried printing in PSE and it gave me an error that it was not a post script printer. Installed ps driver, still getting errors and it wouldn't print.
I would appreciate any help you could give me before I run out of toner and have to buy the expensive toners, or just slit my wrists j/k LOL
Thanks! JS

You need an ICC profile for your printer. Chromix has an excellent service at http://www2.chromix.com/colorvalet/ which will do this calibration for you. You download some software they provide, then print a test file on the exact same paper you are using for your cards. Then send the output to them and they will calibrate the colors with their equipment and send you the ICC profile file. Once you have it, you'll be able to print accurate colors.
There are other services out there that may cost less, but I do not know how reputable they are. Chromix is a good business I've worked with many times.
If you are trying to run a business and you don't understand color management yet, you may be in for a lot of trouble. Please get the book "Real World Color Management" available at http://www.colorremedies.com/realworldcolor/ and it will save you a ton of money and headaches.

Need help with Color Matrix Filter.

need help. still can't find the answer. thanks in advance!

Darin.K wrote:
Yes there are two bugs, I found the other one first but figured if you fixed the result the other would be obvious. This is homework so only a hint:
look at what happens (and does not happen) to pixel.
the first bug was that i had to use the 'result[][]' array instead of the 'image[][]' array in my last loop, right?
the 2nd bug I really can't find :s been lookin at it for almost an hour now and trying new stuff but nothing works,
first i thought i had to put this line " result[x][y] = min(max(int((factor2 * pixel) + bias2), 0), 255);" inside the for loop above but that didn't fix my problem,
maybe the problem is in my 'imageX' and 'imageY' variable, i don't know? any more tips?
I'm sorry for being such a newb but programming isn't my strongest quality.
cedhoc wrote:
Just one more advice:
Look at the format of the "image" array. The way how to use the values from this array depends on the "image depth" parameter.
In your case, because the image is 8bit, you need to use the "colors" array containing the real RGB value.
Look at the Help for the "Read BMP File VI", you should be able to properly handle your pixels from there.
thanks for pointing that out for me, so I connect the 'totalpix' array with the 'colors' array from the image data instead of the 'image' array, that's correct right?

Please I Need Help with nps

Hi
Please I need urgent Help !
i make a backup for ( note + calendar ) my N70 Music With nokia pc suite V 6.83.14.1
then i Format my Mobile , But when i try to Restore The Backup File i was made it, the computer Show me Only The calendar without the Note ( but the backup file include both of note and calendar ) ,I mean i can only restore my calendar!!!!!
please what i do to restore my Note??
the Backup file is (nbu) format .
Thanx A lot

please ??? !!!

Need help with Color Profiles between Photoshop and iPhoto

Hey guys, I'm a photographer and have always used Photoshop in comination with iPhoto. I am having great difficulty lately with color profiles randomly changing within albums of pictures. I need all of my images to be in sRGB, but some somehow end up in Adobe RGB. It seems to happen at random. Apple seems to think it's an Adobe problem. Adobe isn't sure what to do. Anybody aware of any known issues between CS5 and iPhoto using OS 10.8.4 with regard to color profiles and how to fix them?

SRiegel schrieb:
I don't know inkscape, but this article seems to indicate that is will support cmyk.
The article also says you need Scribus to then further process the SVG file.
@shaunamm You need to open the SVGin Illustrator, not place it. But I doubt that you will be able to get the effects in Illustrator.

PLEASE I NEED HELP WITH MY 6800 GT IT DRIVING ME NUTS

Please can anyone help i have a 6800 gt graphics card and it keeps crashing my pc every time i play a graphically intense game i get no error reports i have tried unistalling the driver and reistalling but it makes no difference i have checked the temp of the graphics card which runs about 60'c while playing and 50'c in idle the cpu temp is 40'c in idle and goes upto around 60 to 65'c when playing games so i cant see it being a heat problem please can anyone help or can anyone who has had this problem please tell me how they fixed it thanks for ur help
cpu 3.0ghz p4
mb=abit is7.es
1.5gb of ram
os=winxp pro sp2
psu=450w

Also please test RAM modules with Memtest found here Try each RAM module at a time and play game. If it still crahes I'd rule out memory competely. I don't think it very likey to be the problem though, that would usually restart the system.
Could be a power supply problem, most likely.

Needing Help with color setting for Photoshop 4 + imac

Hi, Is anyone able to assist me please. To cut a long story short. i have had to reinstall my original software onto my Imac as when i put on Snow leopard it was just slowing down Photoshop 4 and would keep crashing. So my problem is .... I had some prints printed today at Fuji and the prints have come back dark and just not up to scratch. I know that it is not Fuji, but my settings. I had someone set up my imac and Photoshop last time, but this time i will have to do myself and i just don't know what to set them at. Can anyone help please. Not sure if you need this info but i am in New Zealand. many thanks in advance.

Being in the business of printing other people's image files, I can say without any doubt that the advent of digital image processing has definitely muddied the waters to a much greater extent than was the case when printing negaive film. I'm also a shooter, and have been using such programs for many years, so I can understand the desire to manipulate your files before sending them to the lab. Color negatives never had "Profiles" attached to them. If the proper film was used for the lighting conditions, it was simply up to the lab to make sure the resulting print was in balance, both in color and density. It was also the lab's responsibility to maintain a degree of quality control that would make all of the above possible and repeatable. I have to agree with the other response to your question. Whether or not you have an embidded a profile, it's always the job of the printer to make sure the final print is up to a certain standard of quality. If that is not the case, find another printer. Unless you have indicated that your files should be printed without any corrections, the oweness belongs to the lab/printer. I do have a few customers whose work I can print with very few corrections, due to the fact that they have calibrated their displays and have a very tight workflow. However, the vast majority of files that I print require a considerable degree of correction, that's my job. It's also the job of your lab/printer and if they are nor satisfying your needs you have to find someone who does. I have printed many files that have no profile embidded and I simply convert them to my working color space(Adobe RGB 1998). If you are concerned about doing color settings, this is the obvious place to start. Create a custom space and make sure your working color is set to Adobe RGB 1998, not sRGB. Adobe RGB 1998 is a considerably larger color space with a wider gamut and will allow for more choices and a wider range when it comes to processing the image. Pro Photo RGB is an even larger color space, but one that is seldom used at this time. I suspect it will become more popular in the fairly near future, as other technologies continue to push the color gamut envelope.
So, I guess the gist of all of this is that you need to either have your lab/printer redo the dark prints, or find someone who knows how to print. And equally important, someone who cares about your work as much as yo do.
I am attaching a screen shot of my color settings and I would suggest this might be a good place to start.
Gary

Need help with color depth on Ultra 5 (solaris 8)

I have always run Solaris on older equipment, and now I have a machine which is "new" to me, an Ultra 5. xdpyinfo tells me that this machine can do 24bpp color, but so far I haven't been able to figure out how to get the X server to come up in 24-bit mode. (Yes I rtfm'ed but I haven't found it yet.)
Since this is a used machine, I only have the Solaris cdroms, etc. (this is for 2.8 beta-01/01, btw), but not the simple docs which came with it. I didn't find it (surprizingly) in answerbook.
Please help if you know how to solve this one. Thanks

Hi, 
There's two things you have to do. 
First, you need to use the frame buffer configuration utility 
called fbconfig to configure the video card. 
Then, you need to copy /usr/dt/config/Xservers in 
/etc/dt/config/Xservers and edit the file to tell the X 
server what color depth to use. 
For example my copy of the Xservers file, configured for 
a standard 8-bit frame buffer on /dev/fb1 and a 24-bit frame 
buffer on /dev/fb0, contains the following line: 
<pre>
:0 Local local_uid@console root /usr/openwin/bin/Xsun -core -logo -dev /dev/fb0 defdepth 24 -dev /dev/fb1 left
</pre>
Be sure to check the man pages for fbconfig(1M) and Xsun(1). 
Hope this helps. 
 
Caryl Takvorian 
Sun Developer Technical Support

Newbie needs help with color profiles

somewhat new to digital photography and send most of my stuff to local lab (Costco) when needing to print. I have a mac, with Leopard, and use Lightroom to export to jpgs and upload to the lab site.
Simple enough, but I noticed their site had the icc's available to download. My intent is for lightroom to rendor and export the photos the way their lab will print them.
Why bother to really develop the picture to my liking if it is just going to print differently.
I dont use PS and not sure how I can, if at all, utilize the color profiles the lab provides in LR.
Sorry if I am not making sense, any and all help is appreciated from you really smart people:)
Thanks

See http://lagemaat.blogspot.com/2007/12/mildly-lightroom-workflow-for-printing.html
You can now also use the
LR/mogrify plugin to convert to any profile you want. Much quicker than the photoshop route.
Note that there is no reason to do this if you do not hardware calibrate your monitor. Otherwise sending them sRGB is more than good enough. On a Mac, make absolutely sure that you at least software calibrate your monitor. See http://www.computer-darkroom.com/colorsync-display/colorsync_1.htm
Doing this will already improve it quite a bit, but there is no substitute for hardware calibration.

Need help with color tints not finding t-slider can you help?

can someone help i'm going bonkers trying to get the tints and colors working
i checked the online help on how to make a color tint.
but the solution tells me if i don't have the "t-slider" make sure the color is checked
as global then go to show options
but this is not helping. i still don't see what i need to make a tint.
i really wish the way to make this work was more like indesign.
please help.
thank you
Message was edited by: [email protected]

You need to make the color a swatch first. Then double click the swatch and check the Global box.

Please I need help with mokia maps!

Hello! I have bought my phone Nokia N76 and I found nokia maps v 1.2 in it, I tried to install nokia maps v 2 but it says "update error"!
when I tried to remove nokia maps 1.2 from the menu, it says unable to delete I tried this from the menu as it is not listed in the application manger list ! what shalI do?! . I don't wan't to update the software (it's the lastest). please if anybody knows help me please?
Message Edited by Twilight28 on 23-Nov-2009 06:53 PM
Message Edited by Twilight28 on 23-Nov-2009 06:54 PM

Reading above posts I seem to remember that for early versions of Nokia Maps the map data is stored in E:\Private\20001f63\diskcache\ NOT E:\CITIES as for later versions, so try deleting these + .qf file. You would need to enable "show hidden & system" files on your PC to see these however.
Provided that you carry out *#7370# or three finger reset (erases ALL data) after deleting these folder/files, you should really be able to install Nokia_Maps_2.0_4503_3.1.sis from here: http://nds1.nokia.com/files/support/global/phones/software/Nokia_Maps_2.0_4503_3.1.sis
You would need to run Nokia Maps application to create folder structure on memory card required to download mapping.
Happy to have helped forum with a Support Ratio = 42.5

Need help with automating text import/pasting/macro between Photoshop and Excel

Hey everyone,
I'm working on a large project now that seems extremely daunting, but I was hoping there would be some way to automate it using either Actions or some sort of macro program. Here's the gist:
I've created a template with 24 differently sized text boxes in the photoshop image file. Each text feild has unique text that needs to be be pasted into it, which has been compiled in excel. This wouldn't be too dificult to do, except I have to recreate this image and all 24 text fields aproximately 350 times. None of the text boxes will remain static through all 350 images as text is the title, description, and demographic ratings/percentages/data for the topic of each image. I did something similar manually last year and it took me about 3, non-stop 18 hour days to complete it.
(the test template)
Can anyone think of any way I could automate this process? I'm thinking some sort of macro that copies cell 1 in excel, switches to photoshop, opens layer 1, pastes, switches back to excel, goes to cell 2, copies, back to photoshop, layer 2, pastes, etc, etc, then does a 'save as' in photoshop and revets to PS layer 1, EX cell 1 (on tab 2) to start the process all over again. I have no idea if this would work or if there is another way to do this but I would really appreciate any help or advice you guys could give. I don't have really any expreience using PS Actions or macro programs/scripts, so I may be over my head or overlooking a really simple way to do this. If there's a way to do it, I'm persistent enough to figure it out and get it working. Doesn't really matter how it gets done, I just need to fill those text boxes as best as I can and as quickly as I can.
Any help you all could give is really appreciated.

Have you read up on the Variables support in Photoshop?

Please I need help with Color , really important

Similar Messages

Maybe you are looking for