Please I need some tips of video editing.

Hi! My name is Bruno Rauch, i'm brazilian and I need some tips for video editing..
Here below I'm going to put a link of two videos that I had made days ago...And I'm very grateful if you guys could see and tell me some tips to encrease my video quality.
Bubble Gun Treffen 2014 - Águas de Lindóia - SP - YouTube
Trip to San Pedro of Atacama - YouTube
Thanks for your help.

What I can suggest is that you look into using image stabilization. I know that the vehicle bounces around, but if you have the front of the car in the shot, or a mountain range in the distance, the software should be able to stabilize your footage some.
Having said that, I should also point out that there are ways to move more smoothly with your camera. There are devices available to steady the camera, called Steadycam. Here is a link.
B&H Photo Video
If you can't afford a Steadycam, just using a tripod can help. keep it folded up, put the camera on it, pick it up under the head, and it acts as a balancing weight to smooth out the movement.
Using such things will also help you keep the horizon straight (except when the car is turning).
One more thing. Carry a bottle of window cleaner and lots of clean rags.

Similar Messages

This website make problem for me, he open by it self everytime i try to open another websites Please i need some help

this website make problem for me, he open by it self everytime i try to open another websites
Please i need some help
http://yandex.ru/yandsearch?text=ццц&lr=1004

Dude, I don't think there's a user on this forum that would click on that link.

Hi, Someone Know why my charger is not working properly but always it was been working good but now when conect my iphone (3gs) shows a yellow triangle saying : Charging is not supported with this accessory. Please I need some help here. Thanks =D

Hi Someone Know why my charger is not working properly but always it was been working good but now when conect my iphone (3gs) appears a golden triangle saying :Charging is not Supported with this accessory. Please I Need Some Help Here. Thanks =D

sounds like the cable or the iphone connector are somehow damaged

Hello please i need some information about the blackberr...

hello please i need some information about the blackberry instant messenger is how does it work , i heard that i send messages for free from a blackberry to a blackberry is it true ? does it need internet ? and does it matter if the other phone is in another country'
thank you alot

Hello,
Here is a page with much information about BBM:
http://na.blackberry.com/eng/devices/features/im/blackberry_messenger.jsp
Hope that helps! If not, Please come to:
http://supportforums.blackberry.com/rim/
and register an account. Then post to the applicable forum.
Thanks!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Getting a new touch nokia , please i need some adv...

ok , now i have an e75 nice phone , but i want a touch nokia , ok so there is the 5800 xpress music , 5530 xm , n97 , and n900 , n900 nice phone , but i am not going to use all these specifications and i am more of a media man and the n900 looks like a black laptop , so it is of the list , now we have the 5800 and the 5530 xm , 5800 and n97 i need some advice , does the contacts in the home screen on the 5800 xm have facebook ?or does it even have facebook in the home screen ? anddoes it have an email applicatiopn like the e75 , e71 n97... and can i get e-mail notifications in the home screen ? and wich one is better e75 or 5800 xpress music ?
Reality is wrong....dreams are for real... 2pac .
don't forget to hit that green kudos
Solved!
Go to Solution.

Hi, of the phones you mentioned the N97 will give the best media experience. Now as to the previous post , it is somewhat incorrect. The phones specs are virtually Identical, but run on entirely different operating systems N97 Symbian 60 V5 and N900 Maemo a brand new Linux based operating system, probably much better for web browsing, and superior for flash content. As your interest is in music/video, and you don't want a 'black computer' probably the N97 is still your best bet of the phones you've mentioned. The N900 is as yet not fully tried and tested, but in theory with it's larger phone memory should be better for web browsing and running multiple apps, we'll see. But with v2.0 software my N97 is now running smoothly and working well as a phone and media player, and initial complaints have reduced in number and most problems seem to have been solved. Untill the N900 is truly on-line in numbers it will be hard to judge, and there are already a few problems turning up on this site. Most complex 'smartphones' have faults, check the web, people have problems with iPhone, Sony Erickson just withdrew their latest offering,Samsung has it's critics. It all boils down to personal choice. I think the N97 is now a good phone, plenty of help and advice on trouble shooting, and will improve more with future firmware updates(maybe it should have been launched 'perfect' but it wasn't,neither are other makes) Choose the one you fancy, stick with it and almost any problem you find can usually be solved by researching forums like this.
Enjoy whatever you choose.
Good Luck
PS if you want to compare specific phones specification many web sites will give you side by side comparisons !
If I have helped at all, a click on the White Star is always appreciated :
you can also help others by marking 'accept as solution'

Please I need some help with a table

Hi All
I need some help with a table.
My table needs to hold prices that the user can update.
Also has a total of the column.
my question is if the user adds in a new price how can i pick up the value they have just entered and then add it to the total which will be the last row in the table?
I have a loop that gets all the values of the column, so I can get the total but it is when the user adds in a new value that I need some help with.
I have tried using but as I need to set the toal with something like total
    totalTable.setValueAt(total, totalTable.getRowCount()-1,1); I end up with an infinite loop.
Can any one please advise on some way I can get this to work ?
Thanks for reading
Craig

Hi there camickr
thanks for the help the other day
this is my full code....
package printing;
import java.awt.*;
import java.awt.event.*;
import java.awt.print.*;
import javax.swing.*;
import javax.swing.table.*;
import java.text.DecimalFormat;
public class tablePanel
    extends JDialog implements Printable {
BorderLayout borderLayout1 = new BorderLayout();
private boolean printing = false;
private Dialog1 dialog;
JPanel jPanel = new JPanel();
JTable table;
JScrollPane scrollPane1 = new JScrollPane();
DefaultTableModel model;
private String[] columnNames = {
private Object[][] data;
private String selectTotal;
private double total;
public tablePanel(Dialog1 dp) {
    dp = dialog;
    try {
      jbInit();
    catch (Exception exception) {
      exception.printStackTrace();
public tablePanel() {
    try {
      jbInit();
    catch (Exception exception) {
      exception.printStackTrace();
private void jbInit() throws Exception {
    jPanel.setLayout(borderLayout1);
    scrollPane1.setBounds(new Rectangle(260, 168, 0, 0));
    this.add(jPanel);
    jPanel.add(scrollPane1, java.awt.BorderLayout.CENTER);
    scrollPane1.getViewport().add(table);
    jPanel.setOpaque(true);
    newTable();
    addToModel();
    addRows();
    setTotal();
public static void main(String[] args) {
tablePanel tablePanel = new tablePanel();
tablePanel.pack();
tablePanel.setVisible(true);
public void setTotal() {
total = 0;
int i = table.getRowCount();
for (i = 0; i < table.getRowCount(); i++) {
    String name = (String) table.getValueAt(i, 1);
    if (!"".equals(name)) {
      if (i != table.getRowCount() - 1) {
        double dt = Double.parseDouble(name);
        total = total + dt;
String str = Double.toString(total);
table.setValueAt(str, table.getRowCount() - 1, 1);
super.repaint();
public void newTable() {
    model = new DefaultTableModel(data, columnNames) {
    table = new JTable() {
      public Component prepareRenderer(TableCellRenderer renderer,
                                       int row, int col) {
        Component c = super.prepareRenderer(renderer, row, col);
        if (printing) {
          c.setBackground(getBackground());
        else {
          if (row % 2 == 1 && !isCellSelected(row, col)) {
            c.setBackground(getBackground());
          else {
            c.setBackground(new Color(227, 239, 250));
          if (isCellSelected(row, col)) {
            c.setBackground(new Color(190, 220, 250));
        return c;
    table.addMouseListener(new MouseAdapter() {
      public void mouseClicked(MouseEvent e) {
        if (e.getClickCount() == 2) {
        if (e.getClickCount() == 1) {
          if (table.getSelectedColumn() == 1) {
   table.setTableHeader(null);
    table.setModel(model);
    scrollPane1.getViewport().add(table);
    table.getColumnModel().getColumn(1).setCellRenderer(new TableRenderDollar());
public void addToModel() {
    Object[] data = {
        "Price", "5800"};
    model.addRow(data);
public void addRows() {
    int rows = 20;
    for (int i = 0; i < rows; i++) {
      Object[] data = {
      model.addRow(data);
public void printOut() {
    PrinterJob pj = PrinterJob.getPrinterJob();
    pj.setPrintable(tablePanel.this);
    pj.printDialog();
    try {
      pj.print();
    catch (Exception PrintException) {}
public int print(Graphics g, PageFormat pageFormat, int pageIndex) throws PrinterException {
    Graphics2D g2 = (Graphics2D) g;
    g2.setColor(Color.black);
    int fontHeight = g2.getFontMetrics().getHeight();
    int fontDesent = g2.getFontMetrics().getDescent();
    //leave room for page number
    double pageHeight = pageFormat.getImageableHeight() - fontHeight;
    double pageWidth = pageFormat.getImageableWidth();
    double tableWidth = (double) table.getColumnModel().getTotalColumnWidth();
    double scale = 1;
    if (tableWidth >= pageWidth) {
      scale = pageWidth / tableWidth;
    double headerHeightOnPage = 16.0;
    //double headerHeightOnPage = table.getTableHeader().getHeight() * scale;
    //System.out.println("this is the hedder heigth   " + headerHeightOnPage);
    double tableWidthOnPage = tableWidth * scale;
    double oneRowHeight = (table.getRowHeight() + table.getRowMargin()) * scale;
    int numRowsOnAPage = (int) ( (pageHeight - headerHeightOnPage) / oneRowHeight);
    double pageHeightForTable = oneRowHeight *numRowsOnAPage;
    int totalNumPages = (int) Math.ceil( ( (double) table.getRowCount()) / numRowsOnAPage);
    if (pageIndex >= totalNumPages) {
      return NO_SUCH_PAGE;
    g2.translate(pageFormat.getImageableX(), pageFormat.getImageableY());
//bottom center
    g2.drawString("Page: " + (pageIndex + 1 + " of " + totalNumPages), (int) pageWidth / 2 - 35, (int) (pageHeight + fontHeight - fontDesent));
    g2.translate(0f, headerHeightOnPage);
    g2.translate(0f, -pageIndex * pageHeightForTable);
    //If this piece of the table is smaller
    //than the size available,
    //clip to the appropriate bounds.
    if (pageIndex + 1 == totalNumPages) {
      int lastRowPrinted =
          numRowsOnAPage * pageIndex;
      int numRowsLeft =
          table.getRowCount()
          - lastRowPrinted;
      g2.setClip(0,
                 (int) (pageHeightForTable * pageIndex),
                 (int) Math.ceil(tableWidthOnPage),
                 (int) Math.ceil(oneRowHeight *
                                 numRowsLeft));
    //else clip to the entire area available.
    else {
      g2.setClip(0,
                 (int) (pageHeightForTable * pageIndex),
                 (int) Math.ceil(tableWidthOnPage),
                 (int) Math.ceil(pageHeightForTable));
    g2.scale(scale, scale);
    printing = true;
    try {
    table.paint(g2);
    finally {
      printing = false;
    //tableView.paint(g2);
    g2.scale(1 / scale, 1 / scale);
    g2.translate(0f, pageIndex * pageHeightForTable);
    g2.translate(0f, -headerHeightOnPage);
    g2.setClip(0, 0,
               (int) Math.ceil(tableWidthOnPage),
               (int) Math.ceil(headerHeightOnPage));
    g2.scale(scale, scale);
    //table.getTableHeader().paint(g2);
    //paint header at top
    return Printable.PAGE_EXISTS;
class TableRenderDollar extends DefaultTableCellRenderer{
    public Component getTableCellRendererComponent(
      JTable table,
      Object value,
      boolean isSelected,
      boolean isFocused,
      int row, int column) {
        setHorizontalAlignment(SwingConstants.RIGHT);
      Component component = super.getTableCellRendererComponent(
        table,
        value,
        isSelected,
        isFocused,
        row,
        column);
        if( value == null || value .equals("")){
          ( (JLabel) component).setText("");
        }else{
          double number = 0.0;
          number = new Double(value.toString()).doubleValue();
          DecimalFormat df = new DecimalFormat(",##0.00");
          ( (JLabel) component).setText(df.format(number));
      return component;
}

Please give me some examples of video chat with adobe flash builder 4 or adobe flex 3.5

I'm a newbie for flex. I had a project from my college to made a video chat application using Adobe Flash Builder 4 and used Red5. please help me, give me some examples of video chat source code, so that i may to learn it. thanks a lot friends.

As you are starting at the beginning you may as well start with FB4. When you install FB4 you will find that its start page has links to documentation tutorials and examples through the tour-de-flex. There are some great blogs that continue to offer advice and examples, nothing beats well written examples for learning. If you are on face book there is an Adobe Flex page that is continually giving links to examples and information about e-seminars.
And of course there is here. So jump on board and have a bit of fun.
David

Need some tips for Database Developer Role.

Dear All,
Next week, I'm going to face an Interview for Database Developer role.
For this, I need some more & useful information on these recommended points.
1. Involve in a designing part of Data warehouse from
scratch
2. Create complex analytic queries on large data sets.
3. Analyse trends in key metrics.
4. Monitoring and optimizing the performance of the database.
Please help get the vital information on these points.
All help will be highly appreciated.
Thanks,

1. Involve in a designing part of Data warehouse from
scratch
Design Database...
This needs lot of information about business and its fonctionnalités, and so many.. Tables, relationships etc...
http://technet.microsoft.com/en-us/library/ms187099%28v=sql.105%29.aspx
Code Design...
SP's, Funcitions, Views, Sub queries, Joins, Triggers etc...
DW Design
DB size and number of reports and historical data details, reduce the normalization and etc....
http://technet.microsoft.com/en-us/library/aa902672%28v=sql.80%29.aspx
2. Create complex analytic queries on large data sets.
Its all based on your current database design, size, required output, data, performance etc..
4. Monitoring and optimizing the performance of the database.
Perfmon, Activity monitor, spotlight, custom queries, DMV's sp_whoisactive, execution plans, and many other thirdparty tools.. and may be best experience will give best view and clarity :)
Note : This is very big topic and its not easy to answer in few words or lines... :) goole it for more details...
Raju Rasagounder Sr MSSQL DBA

Please i need some help time capsule and airport express wireless extender

hello everyone and thank you for looking at my post. i do need some help. i am not very good at the computer programing so i might not use the right terms. i have a time capsule that i just replaced an old pc type router with. i have a fairly large house and can not get wireless signal to the one end of my house. so i went to the apple store and bought an airport express after being told how its just plug and play and itll setup with my time capsule and waala iv just extended my wireless signal. well it did not seam to work that well for me. i have done all the setting up that was told me to in the book to do and i still have get to get a wireless signal out of the express i then hooked up an ethernet wire from the express to my girlfriends macbook. and what do you know now im seeing the express in my airport utility. but then i unplug the ethernet and im back to not seeing the express. what am i doing wrong and what do i need to do. please help me if you can. thanks alot.

Hello fastuca. Welcome to the Apple Discussions!
Let's double-check your base stations' settings ...
o If practical, place the base stations in near proximity to each other during the setup phase. Once done, move them to their desired locations.
o Open AirPort Utility and select the Time Capsule (TC).
o Choose Manual Setup from the Base Station menu, or double-click the base station to open the configuration in a separate window. Enter the base station password if necessary.
o Click AirPort in the toolbar, and then click Wireless.
o Choose “Create a wireless network” from the Wireless Mode pop-up menu, and then select the “Allow this network to be extended” checkbox.
o Next, select the 802.11n AirPort Express Base Station (AXn) that will extend this network, and choose Manual Setup from the Base Station menu, or double-click the base station to open its configuration in a separate window. Enter the base station password if necessary.
o Choose “Extend a wireless network” from the Wireless Mode pop-up menu, and then choose the network you want to extend from the Network Name pop-up menu.
o Enter the base station network and base station password is necessary.
o Click Update to update the base station with new network settings.
(ref: Page 46 of "Designing AirPort Networks Using AirPort Utility)

Need some tips in conversion to xml

hi everybody,
I am trying to develop adapter which takes the flat (notepad text) file as input and gives an xml output based on the schema disigned in prior.
Can any body please give some tips and tricks(like suitable classes,functions) which help me out.
thanks in advance,
regards,
mounika.

JDOM
XStream
Xerces
%

Need some tips for premiere cs6 video editing

I have recorded professionally in a sound proof room with a microphone mc's, it's really good video quality and the sound quality is perfect too.
I have recorded with 2 different devices at different angles i'm going to remove sound from both video clips and use the recorded mp3 file made in Adobe Audition CS6 (amazing program) I want to have the 2nd angle recording put in the video so it shows the main video then the 2nd in a little box in the top corner, how can i do this?
Also any tips people can suggest for me on Speedgrade CS6 or After effects CS6 that will improve the viewing experience will be very appreciated.
Last thing playback in Premiere and after effects is very slow, no computer faults my laptop is extremely fast but one thing i've had this laptop about 8 months and not updates the graphics card, would it be that or is there a way to fix this? when i try playblack in after effects it says something like '0.9/29 frames (not real time), i downloaded quicktime i thought this was real time?
Thank you in advanced

Here are some Tutorials
http://www.youtube.com/playlist?list=PL507B3498B4479B96&feature=plcp
http://forums.adobe.com/thread/913334
http://forums.adobe.com/thread/845731
http://forums.adobe.com/message/3234794
A "crash course" http://forums.adobe.com/thread/761834
A Video Primer for Premiere http://forums.adobe.com/thread/498251
Premiere Tutorial http://forums.adobe.com/thread/424009
And http://forums.adobe.com/message/2738611
And http://blogs.adobe.com/kevinmonahan/2012/08/28/free-video-tutorial-samples-from-learning-p remiere-pro-cs6/
-and more from Kevin http://forums.adobe.com/message/4714153
http://blogs.adobe.com/premiereprotraining/2010/06/video_tutorials_didacticiels_t.html
And http://blogs.adobe.com/premiereprotraining/2010/06/how_to_search_for_premiere_pro.html
And http://bellunevideo.com/tutlist.php
Premiere Pro Wiki http://premierepro.wikia.com/wiki/Main_Page
Tutorial http://www.tutorialized.com/tutorials/Premiere/1
Tutorial http://www.dvxuser.com/V6/forumdisplay.php?f=21
Tutorial HD to SD w/CS4 http://bellunevideo.com/tutorials/CS4_HD2SD/CS4_HD2SD.html
Exporting to DVD http://help.adobe.com/en_US/premierepro/cs/using/WS3E252E59-6BE5-4668-A12E-4ED0348C3FDBa.h tml
And http://help.adobe.com/en_US/premierepro/cs/using/WSCDE15B03-1236-483f-BBD4-263E77B445B9.ht ml
Color correction http://forums.adobe.com/thread/892861
After Effects Tutorials http://www.videocopilot.net/
Surround Sound http://forums.adobe.com/thread/517372
Photo Scaling for Video http://forums.adobe.com/thread/450798
-Too Large May = Crash http://forums.adobe.com/thread/879967
-And another crash report http://forums.adobe.com/thread/973935
CS6 http://www.dvxuser.com/V6/showthread.php?282290-New-Tutorial-Working-Faster-in-Premiere-Pr o-CS6
Video Scaling https://blogs.adobe.com/premiereprotraining/2010/10/scaling-in-premiere-pro-cs5.html
Encore http://tv.adobe.com/show/learn-encore-cs4/
Authoring http://www.videocopilot.net/tutorials/dvd_authoring/
Encore Tutorial http://www.precomposed.com/blog/2009/05/encore-tutorial/
And more Encore http://library.creativecow.net/articles/devis_andrew/
Regions and NTSC vs PAL http://forums.adobe.com/thread/951042
-and Regions http://forums.adobe.com/thread/895223
PDF http://blogs.adobe.com/adobecustomersuccess/2011/05/14/help-support-pages-for-creative-sui te-applications/

MacBook Pro Running slow, need some tips please.

Hi all, been a while since I've been in the forums. I have a year and a half old MBP, 2.16ghz w/ 2GB ram. As the months roll by, it seems as if its performance has gone downhill. I think it might be a few factors: 1, about a year ago I ran VMware fusion (beta) to run XP, when i removed it, I dont think I got rid of everything, always seemed slower since then. 2, about 6 months ago I installed a 1GB of ram myself, my mac recognizes it, but I swear it goes slower than before. Now I may just be paranoid, but better safe than sorry. Are there any good, (cheap or free), utilities or programs to clean up and speed up my mac? Or, anything I can do myself? I dont want to take it in to someone. Thanks guys and gals.

"I ran VMware fusion (beta) to run XP, when i removed it, I dont think I got rid of everything, "
Use Spotlight to search for straggler files.
AppZapper, CleanApp & Hazel are programs that do all the work for you. Hazel & CleanApp gets rid of all straggler files. I only keep AppZapper around because I like the zapping noise it makes.
AppDelete. Best of all this software is free!
"Are there any good, (cheap or free), utilities or programs to clean up and speed up my mac?"
Onyx
"Or, anything I can do myself?"
Max out your RAM.
Empty the trash!
Open up your application folder & go through all your apps. Trash all the apps you no longer want and/or use.
An easier way to do this is to open the Application folder in list view & press the Command+j keys.
In the the dialog that appears, click the "This Window Only" button & the "Calculate All Sizes" check box.
Wait a bit until your file & folder sizes have all been calculated, then click the "Size" column to sort your apps from the fattest to the most anorexic.
Get rid of all your photo files you don't want and/or need. Same goes for those pics off the websites you downloaded (gifs, jpegs, etc.).
I'm old fashion. I still keep my photos in a photo album. So when people come over my house, they can actually "touch" & "feel" my photos without me running to my computer to "show my photos".
Get rid of all your music files you no longer listen too. Especially, if you already have the actual CDs and/or DVDs or you can later redownload from a website.
Use Spotlight to make sure you got rid of everything. You can even trash directly from Spotlight!
Drag what you don't want and/or need to the trash. Better yet, download this neat little shareware app demo called AppZapper. It basically does all the work for you by not only trashing the apps but the apps preference files, caches & all its associated files.
Another software that does the above is AppDelete. Best of all this software is free!
Burn what you want and/or need onto CDs or DVDs.
Not everyone has the luxury of purchasing an external HD and/or a .Mac account to store their "stuff, junk, music & photos".
You can check with your ISP to see if they offer free storage space. Most if not all do now-a-days. I store all 5000+ of my music (mp3s) files & 500+ music videos in my ISP storage bin.
There are thousands if not millions of free storage facilities on the web also. Use your favorite search engine, Google &/or MacGoogle to search them out as they come in different storage sizes to fit your needs & wants.
Check for duplicate fonts.
Applications>Font Book
Select “All Fonts”
If you see any “black dots” next to any fonts this mean you have duplicates and/or multiple versions of these fonts.
To clean this up, select a “black dotted” font or the Apple + click to select multiple dotted fonts;
Edit>Resolve>Duplicates.
What the above does is turns off the duplicates & multiple version fonts. Not delete them.
More than likely the “extras” were installed by other programs and/or other users.
Clear out font caches
Use FontNuke. It does all the work for you. And, best of all it’s FREE.
Printer Drivers
Get rid of all the printer drivers you don’t need & use except the ones for your current printer(s)/scanner(s).
HD>Library>Printers Folder
If you accidently threw something out that you needed for your printer/scanner it can be easily obtained from the manufacturer’s website and/or from the CD that came w/the printer/scanner.
Garage Band
Has about 1GB of loops stored. Get rid of some some them. You surely don’t use, like and/or need them all.
HD>Library>Audio/Apple Loops>Apple>Apple Loops For GarageBand
Or just get rid of the Garage Band app altogether if you don’t use it.
Get rid of extra languages
Strip your computer down to your “native” tongue.
You can do this with a FREE utility called Monolingual. Another app that apparently does all the work for you. I’ve never used it. However, a lot of users here swear by & recommend it highly.
However, there is a warning for *native English speakers*. Make sure you keep BOTH English and English (United States).
Other Resources:
Knowledge Base Article http://docs.info.apple.com/article.html?artnum=303602 Mac Maintenance Quick Assist
Scroll down to "4) Prune Through Your Files".
Slimming your hard drive
Rule of thumb: You should never let your hard drive get to where you have only 10-15% of space left.
Last but not least, check out Mac OS X 10.3/10.4: System maintenance

I REALLY NEED SOME TIPS TO GET SOME GB'S PLEASE!!!!

Please help

If you are referring to your Mac's startup disc getting full,
You should never, EVER let a conputer hard drive get completely full, EVER!
With Macs and OS X, you shouldn't let the hard drive get below 15 GBs or less of free data space.
If it does, it's time for some hard drive housecleaning.
Follow some of my tips for cleaning out, deleting and archiving data from your Mac's internal hard drive.
Have you emptied your Mac's Trash icon in the Dock?
If you use iPhoto, iPhoto has its own trash that needs to be emptied, also.
If you store images in other locations other than iPhoto, then you will have to weed through these to determine what to archive and what to delete.
If you use Apple Mail app, Apple Mail also has its own trash area that needs to be emptied, too!
Delete any old or no longer needed emails and/or archive to disc, flash drives or external hard drive, older emails you want to save.
Look through your other Mailboxes and other Mail categories to see If there is other mail you can archive and/or delete.
STAY AWAY FROM DELETING ANY FILES FROM OS X SYSTEM FOLDER!
Look through your Documents folder and delete any type of old useless type files like "Read Me" type files.
Again, archive to disc, flash drives, ext. hard drives or delete any old documents you no longer use or immediately need.
Look in your Applications folder, if you have applications you haven't used in a long time, if the app doesn't have a dedicated uninstaller, then you can simply drag it into the OS X Trash icon. IF the application has an uninstaller app, then use it to completely delete the app from your Mac.
Download an app called OnyX for your version of OS X.
When you install and launch it, let it do its initial automatic tests, then go to the cleaning and maintenance tabs and run the maintenance tabs that let OnyX clean out all web browser cache files, web browser histories, system cache files, delete old error log files.
Typically, iTunes and iPhoto libraries are the biggest users of HD space.
move these files/data off of your internal drive to the external hard drive and deleted off of the internal hard drive.
If you have any other large folders of personal data or projects, these should be archived or moved, also, to the optical discs, flash drives or external hard drive and then either archived to disc and/or deleted off your internal hard drive.
Good Luck!

Cast in DMM integrated to IPTV----need some tips to improve the channel streams through 4400 DMP. Now the channel streams look little pixelated. Video not sharp...

Hi,
Some one kindly suggest a solution for the below issue.
In one of my customer places we are using the Cast module in DMM 5.2.2 to integrate with the IPTV.
So the IPTV channel streams when it comes to the LCD its not sharp.
The feeds are a bit pixelated and also the scrolling news texts from the IPTV channels looks a little weird.
When we browse the channels using the remote from the Menu the streams coming on the small window on the LCD screen is good but when we put the video to full-screen this pixelation happens.
The streams are decoded using 4400 DMP and using HDMI connection.
The receiver used is D9854 and the DCM used is D9900.
I tried by changing the DMP display parameters but this was not resolved.
We checked the DCM parameters and verified. The DCM parameters are correct and when we stream the channels using VLC on our laptop the stream is good.
So I kindly request to suggest some of the rectification techniques and as such we can resolve this

JD - I appreciate the feedback - as an update, the customer is still adamant that the DMP is to be used only for digital signs and that now he expects Cast to run on all his PCs (I'm thinking Show and Share is the solution for this). I try to only "know what I know" and not assume certain things - but this language seems pretty clear:
"Features of Cisco Cast help your organization to deliver video-on-demand and live broadcast TV channels over IP networks to presentation systems that you connect to DMPs."
http://www.cisco.com/en/US/docs/video/digital_media_systems/5_x/5_2/dmm/user/guide/cast/welcome.html
To me that implies that cast delivery is done explicitly through DMPs but doesn't come out and *say specifically* such - but the way I remember doing it - you just publish your Cast setup to the DMP - there is no "cast server" that you can browse to per se and manipulate the guide, etc in that manner. I'm always open to the idea that there's something I don't know - the IT business has humbled me many times - but this seems awfully straight forward to me.
I'm stuck with the 2200's for cast - I have to try and make them work. I assume the procedure is to link a stream to a multicast group address, then configure that as a channel target within Cast? Never done it for real before - need to know by tomorrow ~noon. Is there any reason why the 2200s would simply NOT work?
Have you had success with remote control emulation? I don't even know if the customer has UCM, but I have been informed that Cast is controllable by a mouse or keyboard (another assertion I'm 99.999% is incorrect) so I need to quit worrying about a remote.
If I sound terrified, it's because I am. Thanks for all the help. I'm not confused yet because so far I've been right about everything I think I know, but when expectations don't line up with reality, that's when things get uncomfortable.

Can someone please send me some tips on how to keep my G5 running quickly?

I'm looking for some great tips on how to keep my G5 running quickly and smoothly. I'm new to owning a MAC and PC's have a disc clean-up and defragment program (among other thing) that I used constantly to keep things running smoothly. Thanks for your help!

Try using Disk Utility to repair your startup disk (hard drive) as shown in Dr.Smokes Resolving Disk, Permission, and Cache Corruption.
Doing the other things in there may help.
Here's his maintenance link so you can start a monthly maintenance program, if you haven't done so already.
Cheers!
DALE
Message was edited by: Dale Weisshaar

Please I need some tips of video editing.

Similar Messages

Maybe you are looking for