Please i really need your help...
where can i buy an hp 110 tri color cartridge? here in the philippines since i bought my printer in singapore, can i buy a cartridge here?
What printer model?
You will need to Contact HP to request a "Regionalization Reset". There should not be any charge for this, it is covered as part of the cartridge warranty. You will need to have access to your computer and printer while on the line with HP. You will also need to have a set of cartridges for the new region, once the reset is complete cartridges from the original region will no longer work. HP's web page on the subject is here.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V
Similar Messages
-
please someone help me regarding my ipad, i updated it to io6 but suddenly it shut down and till today i cannot use it nor turn it on, everytime i turn it on an apple logo only appears on the screen and nothing happens, please i really need a help here thanks
Have you the iPad User Guide? If not, download it from the link under manuals at the start of this forum an tke time to give it a cursory read at the very least.
Also, there is no point in awarding yourself the 'This solved my question' (or indeed 'This helped me') tags since, as you can see, the questioner cannot get any points. (Pardon the pun.) You can learn more about this at
https://discussions.apple.com/static/apple/tutorial/mark.html -
HT4993 A CHINESE STUDENT REALLY NEED YOUR HELP!!
A CHINESE STUDENT REALLY NEED YOUR HELP!!
Dear Sir or Madam,
As I bought my iPhone 5 (16GB,White) in the USA from Sprint, full price with tax, unlocked ,it was excepted to be a global phone. But now I come across with some problems in China using local carrier, everything is working properly except sending text message, and iMessage and Facetime also seem not to work.This is very serious for Apple and me! Will I have the chance to fix this?
I tried all the possible solutions from the Internet, and the Official solution offered by Apple (http://support.apple.com/kb/TS4459), but it doesn't seem to work.
Will Apple help me with this issue? Please do.
Information of my iPhone:
SN: :F1*******8GJ
<Personal Information Edited by Host>luyao49 wrote:
A CHINESE STUDENT REALLY NEED YOUR HELP!!
Dear Sir or Madam,
As I bought my iPhone 5 (16GB,White) in the USA from Sprint, full price with tax, unlocked
No such thing is sold from any authorized source in the US. The Sprint phone is not unlocked. It can be unlocked by Sprint for use on international (non US) carriers for current Sprint customers in good standing after completing (I believe) 60 days of service.
If you are having problems using certain features on an unsupported carrier, you'll have to work it out with your carrier. -
i just brought an iphone 4 16gb off Ebay and everytime i insert my sim it doesnt allow me to activate any further i really need your help?
applelogo wrote:
...Please insert another SIM card from a supported carrier or request that this iPhone be unlocked by your carrier. ...
You need to Contact the Carrier that it is locked to...
Also see this discussion.
https://discussions.apple.com/message/21189708 -
Anybody who can help me? I really need your help
I've tried to execute J2ee tutorial examples.
I don't know why this sample didn't execute...I've already finished to set up J2EE and enviornment variables.
I was trying this part from j2ee tutorial titled as "Packing Web modules".
Whenever I type "asant create-war" to make web modules in command window. I always got error.
Packaging Web Modules(From J2ee tutorial for your information)
A web module must be packaged into a WAR in certain deployment scenarios and whenever you want to distribute the web module. You package a web module into a WAR using the Application Server deploytool utility, by executing the jar command in a directory laid out in the format of a web module, or by using the asant utility. This tutorial allows you to use use either the first or the third approach. To build the hello1 application, follow these steps:
In a terminal window, go to <INSTALL>/j2eetutorial14/examples/web/hello1/.
Run asant build. This target will spawn any necessary compilations and will copy files to the <INSTALL>/j2eetutorial14/examples/web/hello1/build/ directory.
To package the application into a WAR named hello1.war using asant, use the following command:
asant create-war
This command uses web.xml and sun-web.xml files in the <INSTALL>/j2eetutorial14/examples/web/hello1 directory.
To learn how to configure this web application, package the application using deploytool by following these steps:
Start deploytool.
Create a web application called hello1 by running the New Web Component wizard. Select FileNewWeb Component.
In the New Web Component wizard:
Select the Create New Stand-Alone WAR Module radio button.
In the WAR File field, enter <INSTALL>/j2eetutorial14/examples/web/hello1/hello1.war. The WAR Display Name field will show hello1.
In the Context Root field, enter /hello1.
Click Edit Contents to add the content files.
In the Edit Contents dialog box, navigate to <INSTALL>/j2eetutorial14/examples/web/hello1/build/. Select duke.waving.gif, index.jsp, and response.jsp and click Add. Click OK.
Click Next.
Select the No Component radio button and click Next.
Click Finish.
Select FileSave.
A sample hello1.war is provided in <INSTALL>/j2eetutorial14/examples/web/provided-wars/. To open this WAR with deploytool, follow these steps:
Select FileOpen.
Navigate to the provided-wars directory.
Select the WAR.
Click Open Module.
I guess this step is for checking my system about setup information. I not sure how to change it.
the result from execution of ansnt command in dos
D:\J2ee\j2ee-1_4-doc-tutorial_7\j2eetutorial14\examples\web\hello1>asant create- war Buildfile: build.xml
j2ee-home-test:
BUILD FAILED D:\J2ee\j2ee-1_4-doc-tutorial_7\j2eetutorial14\examples\common\targets.xml:10: T he j2ee.home property is not properly set in <INSTALL>/j2eetutorial14/examples/c ommon/build.properties.
Set the j2ee.home property to the location of your Application Server installati on.
On Windows, you must escape any backslashes in the j2ee.home property with anoth er backslash or use forward slashes as a path separator. So, if your Application Server installation is C:\Sun\AppServer, you must set j2ee.home as follows:
j2ee.home = C:\\Sun\\AppServer
or
j2ee.home=C:/Sun/AppServer
j2ee.home is currently set to:
Total time: 0 seconds
D:\J2ee\j2ee-1_4-doc-tutorial_7\j2eetutorial14\examples\web\hello1>
I've installed J2ee sdk in C:\Sun\AppServer
PATH: %J2EE_HOME%\bin;%JAVA_HOME%\bin;
CLASSPATH: %J2EE_HOME%\lib\j2ee.jar;C:\Java\jre1.6.0_05\lib\ext\QTJava.zip;C:\oraclexe\app\oracle\product\10.2.0\server\jdbc\lib\ojdbc14.jar
J2EE_HOME: C:\Sun\AppServer
JAVA_HOME: C:\Sun\AppServer\jdk
I've installed J2ee with administration 4848, HTTP: 8089 HTTP: 8090
I guess this could refer the target.xml and build.properties. So, I've tried after changing some value, which is fit for my setup.
but, still doesn't work.
targets.xml
<path id="classpath">
<fileset dir="${j2ee.home}/lib">
<include name="j2ee.jar"/>
</fileset>
</path>
<target name="j2ee-home-test" >
<!-- Test if j2ee.home is set properly by looking for j2ee.jar -->
<available file="${j2ee.home}/lib/j2ee.jar" type="file" property="j2ee.jar.present" />
<fail unless="j2ee.jar.present">
The j2ee.home property is not properly set in <INSTALL>/j2eetutorial14/examples/common/build.properties.
Set the j2ee.home property to the location of your Application Server installation.
On Windows, you must escape any backslashes in the j2ee.home property with another backslash or use forward slashes as a path separator. So, if your Application Server installation is C:\Sun\AppServer, you must set j2ee.home as follows:
j2ee.home = C:\\Sun\\AppServer
or
j2ee.home=C:/Sun/AppServer
j2ee.home is currently set to: ${j2ee.home}
</fail>
</target>
<target name="clean" >
<delete dir="${build}" />
<delete dir="${dist}" />
<delete dir="${assemble}" />
<delete file="${ear.name}" />
<delete file="${war.name}" />
<delete file="${war.file}" />
<delete file="${client.jar.name}" />
</target>
<path id="db.classpath">
<fileset dir="${db.root}/lib">
<include name="*.jar"/>
</fileset>
</path>
<target name="create-db_common"
depends="init,start-db,delete-db"
description="Create database tables and populate database." >
<sql driver="${db.driver}"
url="${db.url}"
userid="${db.user}"
password="${db.password}"
classpathref="db.classpath"
delimiter="${db.delimiter}"
autocommit="false"
onerror="abort" >
<transaction src="${sql.script}"/>
</sql>
</target>
<target name="delete-db"
description="Deletes the database tables." >
<sql driver="${db.driver}"
url="${db.url}"
userid="${db.user}"
password="${db.password}"
classpathref="db.classpath"
delimiter="${db.delimiter}"
autocommit="false"
onerror="continue" >
<transaction src="${delete.sql.script}"/>
</sql>
</target>
<target name="ping-db"
description="Checks to see if Derby is running." >
<java classname="org.apache.derby.drda.NetworkServerControl"
fork="yes"
resultproperty="db.ping.result">
<jvmarg line="${db.jvmargs}" />
<arg line="ping" />
<classpath refid="db.classpath" />
</java>
<condition property="db.running">
<equals arg1="${db.ping.result}" arg2="0" />
</condition>
</target>
<target name="start-db"
unless="db.running"
description="Starts the Derby databse server."
depends="ping-db">
<sun-appserv-admin
explicitcommand="start-database" />
</target>
<target name="stop-db"
description="Stops the Derby database server."
depends="ping-db"
if="db.running">
<sun-appserv-admin
explicitcommand="stop-database" />
</target>
<target name="admin_command_common">
<echo message="Doing admin task ${admin.command}"/>
<sun-appserv-admin
command="${admin.command}"
user="${admin.user}"
passwordfile="${admin.password.file}"
host="${admin.host}"
port="${admin.port}"
asinstalldir="${j2ee.home}" />
</target>
<target name="create-jdbc-resource_common">
<antcall target="admin_command_common">
<param name="admin.command"
value="create-jdbc-resource
--connectionpoolid ${conpool.name} ${jdbc.resource.name}" />
</antcall>
</target>
<target name="delete-jdbc-resource_common">
<antcall target="admin_command_common">
<param name="admin.command"
value="delete-jdbc-resource ${jdbc.resource.name}" />
</antcall>
</target>
<target name="deploy-war">
<antcall target="admin_command_common">
<param name="admin.command"
value="deploy ${war.file}" />
</antcall>
</target>
<target name="undeploy-war">
<antcall target="admin_command_common">
<param name="admin.command"
value="undeploy ${example}" />
</antcall>
</target>
<property environment="env" />
<target name="listprops"
description="Displays values of some of the properties of this build file">
<property file="../../common/admin-password.txt" />
<echo message="Path information" />
<echo message="j2ee.home = ${j2ee.home}" />
<echo message="j2ee.tutorial.home = ${j2ee.tutorial.home}" />
<echo message="env.Path = ${env.Path}" />
<echo message="env.PATH = ${env.PATH}" />
<echo message="" />
<echo message="Classpath information" />
<echo message="classpath = ${env.CLASSPATH}" />
<echo message="" />
<echo message="Admin information" />
<echo message="admin.password = ${AS_ADMIN_PASSWORD}" />
<echo message="admin.password.file = ${admin.password.file}" />
<echo message="admin.host = ${admin.host}" />
<echo message="admin.user = ${admin.user}" />
<echo message="admin.port = ${admin.port}" />
<echo message="https.port = ${https.port}" />
<echo message="" />
<echo message="Domain information" />
<echo message="domain.resources = ${domain.resources}" />
<echo message="domain.resources.port = ${domain.resources.port}" />
<echo message="" />
<echo message="Database information" />
<echo message="db.root = ${db.root}" />
<echo message="db.driver = ${db.driver}" />
<echo message="db.host = ${db.host}" />
<echo message="db.port = ${db.port}" />
<echo message="db.sid = ${db.sid}" />
<echo message="db.url = ${db.url}" />
<echo message="db.user = ${db.user}" />
<echo message="db.pwd = ${db.pwd}" />
<echo message="url.prop = ${url.prop}" />
<echo message="ds.class = ${ds.class}" />
<echo message="db.jvmargs = ${db.jvmargs}" />
</target>
build.properties ����
j2ee.home=
j2ee.tutorial.home=
asinstall.dir=${j2ee.home}
admin.password.file=${j2ee.tutorial.home}/examples/common/admin-password.txt
admin.host=localhost
admin.user=admin
admin.port=4848
https.port=8181
domain.resources="domain.resources"
domain.resources.port=8080
# Derby configuration settings
db.delimiter=;
db.root=${j2ee.home}/derby
db.driver=org.apache.derby.jdbc.ClientDriver
db.datasource=org.apache.derby.jdbc.ClientDataSource
db.host=localhost
db.port=1527
db.sid=sun-appserv-samples
db.url=jdbc:derby://${db.host}:${db.port}/${db.sid};create=true;
db.user=APP
db.pwd=APP
db.jvmargs=-ms16m -mx32m
Is there anyone who can tell me how to change it? I really need your help....
Thank you in advance.ok,
First of all make sure your tutorial folder is installed from the root:
C:\javaeetutorial5
or
D:\javaeetutorial5
it makes things so simple.
Secondly:
set your jee tutorial home
JAVAEE.TUTORIAL.HOME =
C:/javaeetutorial5
Thirdly: check in:
C:\javaeetutorial5\examples\bp-project
make a copy of the build.properties.sample save it as build.propropties, as a property file,
edit the properties file as in:
build.properties
As follows:
# uncomment the property javaee.home, and add the path
# to your GlassFish Java EE 5 SDK installation
javaee.home=c:/Sun/SDK
javaee.tutorial.home=c:/javaeetutorial5
# Uncomment the property j2ee.server.username,
# and replace the administrator username of the app-server
javaee.server.username=admin
# Uncomment the property j2ee.server.passwordfile,
# and replace the following line to point to a file that
# contains the admin password for your app-server.
# The file should contain the password in the following line:
AS_ADMIN_PASSWORD=admin1234and so fourth. Some of the settings as the application server name is all done for you
and then test it again.
Take care of editing the property file. It can give you headache.
Note also that this is for application server 9.1 - JEE5.
eve -
Hi. I am reinstalling Macbook Pro OS X from the "question mark icon". During process, there is a question "select the disk where to install Mac OS X" but there is no option/selection in the box. I really need your help guys. I need it badly. :'(
If you got the question mark and you do not see any partition to install OS X to, it is not good.
Close the OS X installer by pressing the red button at the top left corner of the Install OS X window, and open Disk Utility. Then, look at the left sidebar and tell me if you see your hard drive. You should see something like this:
Do not worry if you do not see Macintosh HD or if the option with an arrow shows a different name. This is normal.
If you see it, choose it, go to the Erase tab and erase the drive. Finally, close Disk Utility and reinstall OS X. You will lose everything if you do not have a backup.
If you do not see the drive, it is damaged and it has to be replaced. You can replace the hard drive of a MacBook Pro without voiding the warranty, and any 2'5" SATA hard drive is valid. If you are not an experienced user or you do not want to go inside the MacBook, take it to an Apple Store or reseller. -
Hi. i downloaded the last version osf ios7, but i skipped the part where i was supposed to sing in to iCloud, now i'm trying to restart my iphone and i can't,,, i don't know what to do i really need your help!!!
Just go into settings>Icloud> then sign in there.
-
Zen microphoto help!! please i really need your h
hello everybody, i bought a zen microphoto 4GB in June and it worked perfectly until two days ago. I turned it on like i do everyday to listen to music on my way to school. i downloaded the newest version of firmware onto it'sthree days before. when i turned it on, it went into recovery mode. so i went to reboot, and it goes back into recovery mode. i tried about 3 times, then it disabled all the functions. i couldn't control anything. so i took out the battery, and left it until i came home. i come home, put in the battery, turn it on. i plug it in the computer, and the computer does not reconize that its docked and the screen goes white and then it shuts off by itself. then it just freezes, it refuses to turn on. i tell my friend today at school and he said the hard dri've crashed and now i have a brick the size of a zen microphoto. is this true, or?is something else wrong with it. please someone help if you can. Creative Zen MicroPhoto 4GBfirmware dowloaded 3 days before--ZENMicroPhoto_PCFW_6__30_04.exepurchased- June 0, 2006 with product replacement plan from best buyproblems started occuring November 7, 2006Message Edited by barylakamil on -09-200603:22 PM
one method i saw and tried worked well but you need to try it at your own risk!!! turn off your microphoto, grab your microphoto with the screen facing you, and either slap your hand against the SIDE of your microphoto, or slap the SIDE of your microphoto against your hand. This method works for me but try it at your own risk. it could damage your hard disk. (its probably already damaged anyways.)and if you really need to turn off your Zen but it wont turn off, i suggest removing the battery.
Message Edited by gmail on -09-200605:34 PM -
Background: Cannot get SUBSCRIBE button to shoot me into iTunes/podcasts like it did before in v06.
Situation: (iWeb08) and http://www.threeboysproductions.com is a godaddy domain buy. http://web.mac.com/captmench is the actual address.
LONG AND SHORT: I really need to get rid of the www.threeboysetc from anywhere in iWeb but I can't seem to find a way.
Here's why:
Clicking on SUBSCRIBE from my Zachary's Film page generates this address:
http://www.threeboysproductions.com/Site/Zachary_Films/rss.xml
which, if you click on it you'll get the homepage. Why? Not sure but anything past the www.threeboyspetc/ just sends you to the homepage.
so
change www.tbp.com to actual title and you get a nice RSS feed:
http://web.mac.com/captmench/Site/Zachary_Films/rss.xml
HOWEVER --
Take any of those feeds and you'll get the main page again because they all say www.threeboysproductions.com.
For Example this from the RSS feed:
http://www.threeboysproductions.com/Site/ZacharyFilms/Entries/2007/8/25_FirstDinner.html
Sends you back to homepage
change it from www.threeboysproductions... and:
http://web.mac.com/captmench/Site/ZacharyFilms/Entries/2007/8/25_FirstDinner.html
It works fine!!
The xml file generated by iWeb confirms this:
<?xml version="1.0" encoding="UTF-8"?>
<rss xmlns:itunes="http://www.itunes.com/dtds/podcast-1.0.dtd" xmlns:iweb="http://www.apple.com/iweb" version="2.0">
<channel>
<title>Filming Zachary</title>
<link>http://www.threeboysproductions.com/Site/ZacharyFilms/ZacharyFilms.html</link>
<description>Zachary’s never known any other camera but the DVX... so I’ve been able to get some very nice stuff of him all along.</description>
<generator>iWeb 2.0.1</generator>
<ttl>60</ttl>
<itunes:explicit>no</itunes:explicit>
<itunes:author>ThreeBoys Productions</itunes:author>
<itunes:owner>
<itunes:name>ThreeBoys Productions</itunes:name>
</itunes:owner>
AND --
<description><a href="http://www.threeboysproductions.com/Site/Media/ElmoShirt.mov"><img src="http://www.threeboysproductions.com/Site/ZacharyFilms/Media/ElmoShirt1.png" style="float:left; padding-right:10px; padding-bottom:10px; width:192px; height:108px;"/></a>Zachary’s grandmother sent him an Elmo shirt... This is what happened when he opened it up.</description>
<enclosure url="http://www.threeboysproductions.com/Site/Media/ElmoShirt.mov" length="26452526" type="video/quicktime"/>
<itunes:explicit>no</itunes:explicit>
<itunes:duration>00:04:18</itunes:duration>
Please help me get this squared away.
Thanks,
CaptMOk... part of this might have come from the migration to 08. I had to trash my old site and rebuilt from ground up (using the same dirt, I think) and maybe I ended up keeping some of the old information.
look at the forward link:
http://web.mac.com/captmench/iWeb/Site/ThreeBoys.html/Site/Zachary_Films/rss.xml
The part iWeb/Site/ThreeBoys.html must be from your old version , so you may want to look at your forward config at your domain host.
You may want to talk to your domain host, because the forward frame is generated by them. -
Please guys I really need your HELP!!!!!
Hi
I have a desktop running Vista and have iTunes version 9.02.25 running. I can connect my old 15GB iPod and iTunes will recognize it no problems. However when I try and connect my 6GB iPod mini, even though its charging, nothing happens.
Can you please help??
I used to have both connected to an older desktop I think.
I have also tried to manually put the iPod in Disk mode and then connect it by USB but this doesnt work. You can tell that the PC is not recognising it cos when you connect the 15GB iPod it makes a faint beep as in something is connected by USB but when you connect the mini there's no beep...
Cheers my loves
Suzy SuzHave you the iPad User Guide? If not, download it from the link under manuals at the start of this forum an tke time to give it a cursory read at the very least.
Also, there is no point in awarding yourself the 'This solved my question' (or indeed 'This helped me') tags since, as you can see, the questioner cannot get any points. (Pardon the pun.) You can learn more about this at
https://discussions.apple.com/static/apple/tutorial/mark.html -
MIDP - Graph / I really need your help
Hi
I have to create graphs (bar, pie chart, histogram....) with lengends but I have no idea to do that with J2ME/MIDP ?
Can you please help me and sending me samples, avdices .... ?
Thank you very very much
Mel
[email protected]ok, where do I start.
I don't know what u know how to do already, so....
I'l give u a basic outline, of how a midlet is structured.
Then you'll be able to work out how to do the Graphing and stuff yourself.
1st class in any Midlet must extend javax.microedition.midlet.MIDlet
When the user starts the MIDlet, the startApp() in MIDlet is called by the KVM.
So, in the startApp() you need to make your first Screen visible. You make a screen visible with the following...
Display.getDisplay(Midlet).setCurrent(Displayable)
You'll notice you pass in in a Displayable; this is an interface implemented by Canvas and Screen.
Screens are an abstract superclass of Form(Form is similar to java.awt.Form in usage)
You can add Components to Forms just like you can in the awt,
(though in MIDP components are called Item's.(javax.microedition.lcdui.Item)
The other Class that implements Displayable is the Canvas class. Canvas is similar to Canvas in the awt, but, in MIDP it is a top level class - meaning it doesn't need to be added to a Form before it can be displayed.
Another Class your going to need is the Image class.
In MIDP you can't do " new Image(.........) "
You have to do Image.createImage(......)
MIDP also has the Graphics class (from awt), which u obtain with the getGraphics() in Image.
You'll find MASSIVE limitations with both the Image and Graphics classes if you try and do anything remotely clever.. so don't ;-)
For your Graph plotting tool, you've got 2 options,
extend Item and make your graph tool a part of a form.
OR
extend Canvas and make your graph tool a full screen standalone page.
The second is more work, but is probably the better option, as your going 2 need the full screen to be able to display anything 1/2way useful (the default phone is only 96x100).
I'd recommend reading this with the API open alongside, as it makes little sense on its own.
hope this is some help,
I can post all sorts of examples,
just have a go yourself 1st, and c what u get stuck with.
rob, -
PLEASE! i NEED your help!
Hello i need help!
For the last 3 weeks my itunes is not working ' itunes was not installed correctly please reinstall error 7 ". and quicktime isen't wokring either ' pleas install apple application support here is a list of thinks that i'v tried to do.
1) downloaded revo installer pro ( 30 days trial ). and deleted everything apple and than reinstalled itunes.
2) downloaded winrar to download apple aplication support.
3) updated everything in my windows update exept for ' windows 7 pack 1 x64 systems ( kb976932 ) because my battery needs to get replaced but i can't buy that untill next month ( i'm in college ).
please please please! help me i don't know annything about all this!iTunes for Windows: "Error 7" message when opening iTunes
-
Really need your help! Pc photos not uploading to pc.
My pc photos ARE NOT uploading to iPad, but my iPad photos are are loading to my PC. Having a family get together tonight and need to show pics.
Please help!Have you the iPad User Guide? If not, download it from the link under manuals at the start of this forum an tke time to give it a cursory read at the very least.
Also, there is no point in awarding yourself the 'This solved my question' (or indeed 'This helped me') tags since, as you can see, the questioner cannot get any points. (Pardon the pun.) You can learn more about this at
https://discussions.apple.com/static/apple/tutorial/mark.html -
HT4993 unlocked A CHINESE STUDENT REALLY NEED YOUR HELP!!
Dear Sir or Madam,
As I bought my iPhone 5 (16GB,White) in the USA from Sprint, full price with tax, unlocked ,it was excepted to be a global phone. But now I come across with some problems in China using local carrier, everything is working properly except sending text message, and iMessage and Facetime also seem not to work.This is very serious for Apple and me! Will I have the chance to fix this?
I tried all the possible solutions from the Internet, and the Official solution offered by Apple (http://support.apple.com/kb/TS4459), but it doesn't seem to work.
Will Apple help me with this issue? Please do.
<Personal Information Edited by Host>You should not post personal data on a public forum such as this. I have requested the Host to edit it for your protection.
Texting is something that must be set up for you with your carrier. I suggest that you talk to them first.
Allan -
Please I really need a help!
I am trying to use this kind of font: www.asappaving.com ,
where it says: ASAPPAVING, so what kind of product of adobe I could
use to do this. Please I would appreciate if somebody could help me
with that. Thanks1. http://support.apple.com/kb/HT3964?viewlocale=en_US&locale=en_US
2. http://support.apple.com/kb/ht1379
Maybe you are looking for
-
Connecting my macbook pro 13" to Sony bravia via mini Displayport to HDMI
Hi, yesterday I bought a new LCD TV Sony Bravia KDL-32EX600 (Full-HD LED) that has 4 x HDMI inputs. I also bought a mini Displayport to HDMI and HDMI to HDMI cable. When I connect it to my computer, the screen goes blue for a second and it doesn't re
-
Itunes remote on iphone 3g no longer finding my library
After using past versions of itunes, my remote ap on my Iphone 3G keeps telling me it can't find my music library. I'm using Itunes 10.5.2
-
Full motion .swf's in Adobe Presenter
This has been one of the most frustrating and time consuming technical issues I've ever encountered. This is my 3rd posting (2 on a Captivate forum, 1 on a Presenter forum), and no one is able to help me! Surely I can't be the only one to encounter t
-
Can I get the apple warranty on a phone purchased from verizon?
I need to purchase an Iphone 5 from Verizon because I have to transfer upgrade status. I do not want their insurance I want the Apple extended service. Can I purchase it after I get the phone from Verizon?
-
Broken link on copy and paste from normal user to required upper privilege user
Hi, I've encountered an error that is probably coming from environment variables. When I copy %document%\something\ from a normal user to %programs% where it require administrator privilege, i'm prompted with a credential window ( so far so good ) u