PLEASE: IS THIS A VALID ERROR WHEN RUNNING DISC ULTIL FROM INSTALL DISK 1

when running disc util from install disc 1..i'm getting "invaild leaf record count it should be 7 instead of 96" my install reads os vers 10.2.1.. my current os is 10.4.9

I would try running the Disk repair several more times. But more then likely you'll need a more robust utility.
DiskWarrior is the best there is at this.
If you have a backup, preferably a bootable backup from before this problem, you can Erase and Install to give you a new directory. If you don't have a backup, this procedure will erase everything on your drive.
Cheers!
DALE

Similar Messages

  • Error when trying to start from install disk OS X 10.4

    Hi,
    I have an iBook G4 with the 1.42 GHz model, 60 GB, 512 RAM. I am running OSX 10.4.11. I would like to get it to run better. I installed TenFourFox as my new browser, that seemed to help, but it's still pretty slow. So then I freed up some more space on the hard drive. Then I started it up in Safe Mode, then I ran the disk utility and repaired the disk permissions. I ran the disk verify and found errors, and I then ran fsck - y at the command line. That seemed to get rid of the errors, but I am thinking I should format the hard drive and do a clean install.
    Will doing a clean install help the computer run better/ faster? How can I do it? I am running into errors...
    I lost the install disks, but luckily a friend of mine had a copy.
    I insert the disk, power down, and restart.
    I get the a really long error message, below are snippets:
    panic(cpu 0 caller 0x002E0BF4): Unable to find driver for this platform: "PowerBook6,7"
    Latest stack backtrace for cpu 0:
    Backtrace 0x00099EA4 0x0009A860 0x00027A28 0x002E)B4.....
    No debugger configured - dumping debug information...
    panic: We are hanging here.
    Is there something wrong with my computer? Or are the install disks not compatible? Maybe they were install disks for a powerbook and not an iBook (not sure if that matters).
    I am also considering installing RAM. Will that help a lot with the speed (i.e. 50% faster?) or just a little?
    Thanks a lot for any input!

    Wrong install Disc, that one is machine specific, & doubtful a reinstall will help all that much.
    More RAM will likely help, but not awfully likely it'll be 50%.
    To tell, ehen it gets slow, Open Activity Monitor, Show:>All Processes, sort on CPU%, see if anything using too much CPU% when this happens, click on Memory tab, do you have many Pageouts?

  • Authorization error when running a report from the portal

    Hello,
    I am trying to run a certain report under a certain user in the portal.
    If I run this report with this user from the BW it is working but if I run it from the portal with this user it doesn't. The error I receive in the portal is this:
    ABEND: Program error in class SAPMSSY1 method : UNCAUGHT_EXCEPTION
    ABEND: Errors while reading InfoProvider data
    ABEND: Error in BW:
    ABEND: You do not have authorization for the data transfer process
    Which other authorizations the user needs?

    Hey Roy,
    Check with the User Portal Roles and all Authorization Objects in BW.
    when we talking about Portal from BW - Is is URL portal or RFC Portal?
    Thanks,
    CP

  • Rep-52005 error when running a report from form with parameter form

    I am trying to run a report from a web deployed form and this report has a parameter form. I am getting a Rep-52005: The specified key report does not exist in key map file.
    I am using Oracle Forms/Reports 10.1.2.0.2. My code is below. The first part works fine where I run a report with no parameter form, but the second part when I have a parameter form gets the about error.
    PROCEDURE call_report (
    p_report_name VARCHAR2,
    p_reportobj_name VARCHAR2 DEFAULT NULL,
    p_parameter_list paramlist DEFAULT NULL,
    p_parameter_string VARCHAR2 DEFAULT NULL
    IS
    repid report_object;
    v_rep VARCHAR2 (100);
    rep_status VARCHAR2 (100);
    v_report_url VARCHAR2 (240);
    v_interface VARCHAR2 (50);
    v_report_parameter VARCHAR2 (1);
    vc_user_name VARCHAR2 (100);
    vc_user_password VARCHAR2 (100);
    vc_user_connect VARCHAR2 (100);
    vc_connect VARCHAR2 (300);
    v_reportserv VARCHAR2 (30);
    v_job_number number;
    BEGIN
    /* Get the database to run the report against and
    find out if the report has any parameters */
    SELECT report_parameter_flag
    INTO v_report_parameter
    FROM program_list
    WHERE program_type = 'REPORTS'
    AND UPPER (screen_id) = UPPER (p_report_name);
    vc_user_name := get_application_property (username);
    vc_user_password := get_application_property (password);
    vc_user_connect := get_application_property (connect_string);
    v_reportserv := 'rep_xxxx_ias10g_home';
    v_report_url := 'http://xxxx.state.il.us';
    v_job_number := length(v_reportserv) +2;
    vc_connect :=
    vc_user_name
    || '/'
    || vc_user_password
    || '@'
    || vc_user_connect;
    v_interface := get_application_property (user_interface);
    IF ( v_interface = 'WEB'
    AND v_report_parameter = 'N'
    THEN
    repid := find_report_object(p_reportobj_name);
    set_report_object_property (repid, report_comm_mode, synchronous);
    set_report_object_property (repid, report_destype, cache);
    set_report_object_property (repid, report_desformat, 'pdf');
    -- v_reportserv := get_report_object_property (repid,report_server);
    set_report_object_property (repid, report_server, v_reportserv);
    set_report_object_property (repid, report_other, p_parameter_string);
    v_rep := run_report_object (repid);
    rep_status := report_object_status (v_rep);
    IF rep_status = 'FINISHED'
    THEN
    web.show_document (
    v_report_url
    || '/reports/rwservlet/getjobid='
    || substr(v_rep,v_job_number)
    || '?server='
    || v_reportserv
    ,'_blank'
    ELSE
    message ( rep_status
    || 'Report output aborted');
    END IF;
    ELSIF ( v_interface = 'WEB'
    AND v_report_parameter = 'Y'
    THEN
    repid := find_report_object (p_reportobj_name);
    set_report_object_property (repid, report_comm_mode, synchronous);
    set_report_object_property (repid, report_destype, cache);
    set_report_object_property (repid, report_desformat, 'pdf');
    set_report_object_property (repid, report_server, v_reportserv);
    set_report_object_property (
    repid,
    report_other,
    'paramform=yes P_USER_CONNECT='
    || vc_connect
    || ' P_SERVERNAME='
    || v_reportserv
    || ' P_ACTION='
    || v_report_url
    || '/reports/rwservlet'
    v_rep := run_report_object (repid);
    rep_status := report_object_status (v_rep);
    IF rep_status = 'FINISHED'
    THEN
    web.show_document (
    v_report_url
    || '/reports/rwservlet/getjobid='
    || substr(v_rep,v_job_number)
    || '?server='
    || v_reportserv
    ,'_blank'
    ELSE
    message ( rep_status
    || 'Report output aborted');
    END IF;
    ELSE
    run_product (
    reports,
    p_report_name,
    synchronous,
    runtime,
    filesystem,
    p_parameter_list,
    NULL
    END IF;
    EXCEPTION
    WHEN OTHERS
    THEN
    message (SQLERRM);
    END;
    My parameter form comes up and I enter the necessary information and hit submit query button. Then I get the Rep-52005: The specified key report does not exist in key map file.
    Any help will be greatly appreciated!!
    Shellie Bricker

    Your code seems to be implementing metalink note 139546.1 - Using Reports parameter forms with RUN_REPORT_OBJECT on the web.
    For what I can see, the P_ACTION parameter should end in ?...
    i.e.
    P_ACTION=http://<hostname.domain:port>/reports/rwservlet?'
    set_report_object_property (
    repid,
    report_other,
    'paramform=yes P_USER_CONNECT='
    || vc_connect
    || ' P_SERVERNAME='
    || v_reportserv
    || ' P_ACTION='
    || v_report_url
    || '/reports/rwservlet?'
    );If this does not fix your problem, then to troubleshoot further you would have to post the code in your Before Parameter Form trigger of your report.
    Hope this helps,
    UPDATE:
    If the above does not fix your problem, my guess is that report name is not being generated in the hidden runtime values build by the code in the Before Parameter Form trigger.
    i.e.
    http://localhost:8889/reports/rwservlet?report=&destype=cache&desformat=PDF
    The above code will throw error REP-52005: The specified key report does not exist in key map file.
    Edited by: Rodolfo Ferrari on Jul 8, 2009 9:43 PM

  • Error when run a page from jdev10.1.3.3

    Hi All,
    i ve loaded all the files(.class & .xml) from the server to my local machine jdevhome/jdev/myprojects and myclasses folder. also loaded the pages and region from mds to myprojects folder. but when Im trying to run a page from jdev 10.1.3.3. an error page is displayed
    the error stack is as follows
    oracle.apps.fnd.framework.OAException: java.lang.NullPointerException
         at oracle.apps.fnd.framework.OAException.wrapperException(Unknown Source)
         at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequest(Unknown Source)
         at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.processRequest(Unknown Source)
         at oracle.apps.fnd.framework.webui.OAPageLayoutHelper.processRequest(Unknown Source)
         at oracle.apps.fnd.framework.webui.beans.layout.OAPageLayoutBean.processRequest(Unknown Source)
         at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequestChildren(Unknown Source)
         at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequestChildren(Unknown Source)
         at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequest(Unknown Source)
         at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.processRequest(Unknown Source)
         at oracle.apps.fnd.framework.webui.beans.form.OAFormBean.processRequest(Unknown Source)
         at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequestChildren(Unknown Source)
         at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequestChildren(Unknown Source)
         at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequest(Unknown Source)
         at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.processRequest(Unknown Source)
         at oracle.apps.fnd.framework.webui.beans.OABodyBean.processRequest(Unknown Source)
         at oracle.apps.fnd.framework.webui.OAPageBean.processRequest(Unknown Source)
         at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(Unknown Source)
         at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(Unknown Source)
         at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(Unknown Source)
         at OA.jspService(_OA.java:71)
         at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:59)
         at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:462)
         at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:594)
         at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:518)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
         at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:713)
         at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:370)
         at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:871)
         at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:453)
         at com.evermind.server.http.HttpRequestHandler.serveOneRequest(HttpRequestHandler.java:221)
         at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:122)
         at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:111)
         at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
         at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
         at java.lang.Thread.run(Thread.java:595)
    ## Detail 0 ##
    java.lang.NullPointerException
         at java.util.Hashtable.put(Hashtable.java:396)
         at oracle.apps.fnd.framework.webui.OAPageContextImpl.putSessionValue(Unknown Source)
         at oracle.apps.pos.supplier.webui.ByrAddCntctCO.processRequest(ByrAddCntctCO.java:97)
         at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequest(Unknown Source)
         at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.processRequest(Unknown Source)
         at oracle.apps.fnd.framework.webui.OAPageLayoutHelper.processRequest(Unknown Source)
         at oracle.apps.fnd.framework.webui.beans.layout.OAPageLayoutBean.processRequest(Unknown Source)
         at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequestChildren(Unknown Source)
         at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequestChildren(Unknown Source)
         at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequest(Unknown Source)
         at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.processRequest(Unknown Source)
         at oracle.apps.fnd.framework.webui.beans.form.OAFormBean.processRequest(Unknown Source)
         at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequestChildren(Unknown Source)
         at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequestChildren(Unknown Source)
         at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequest(Unknown Source)
         at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.processRequest(Unknown Source)
         at oracle.apps.fnd.framework.webui.beans.OABodyBean.processRequest(Unknown Source)
         at oracle.apps.fnd.framework.webui.OAPageBean.processRequest(Unknown Source)
         at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(Unknown Source)
         at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(Unknown Source)
         at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(Unknown Source)
         at OA.jspService(_OA.java:71)
         at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:59)
         at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:462)
         at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:594)
         at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:518)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
         at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:713)
         at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:370)
         at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:871)
         at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:453)
         at com.evermind.server.http.HttpRequestHandler.serveOneRequest(HttpRequestHandler.java:221)
         at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:122)
         at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:111)
         at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
         at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
         at java.lang.Thread.run(Thread.java:595)
    java.lang.NullPointerException
         at java.util.Hashtable.put(Hashtable.java:396)
         at oracle.apps.fnd.framework.webui.OAPageContextImpl.putSessionValue(Unknown Source)
         at oracle.apps.pos.supplier.webui.ByrAddCntctCO.processRequest(ByrAddCntctCO.java:97)
         at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequest(Unknown Source)
         at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.processRequest(Unknown Source)
         at oracle.apps.fnd.framework.webui.OAPageLayoutHelper.processRequest(Unknown Source)
         at oracle.apps.fnd.framework.webui.beans.layout.OAPageLayoutBean.processRequest(Unknown Source)
         at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequestChildren(Unknown Source)
         at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequestChildren(Unknown Source)
         at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequest(Unknown Source)
         at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.processRequest(Unknown Source)
         at oracle.apps.fnd.framework.webui.beans.form.OAFormBean.processRequest(Unknown Source)
         at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequestChildren(Unknown Source)
         at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequestChildren(Unknown Source)
         at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequest(Unknown Source)
         at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.processRequest(Unknown Source)
         at oracle.apps.fnd.framework.webui.beans.OABodyBean.processRequest(Unknown Source)
         at oracle.apps.fnd.framework.webui.OAPageBean.processRequest(Unknown Source)
         at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(Unknown Source)
         at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(Unknown Source)
         at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(Unknown Source)
         at OA.jspService(_OA.java:71)
         at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:59)
         at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:462)
         at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:594)
         at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:518)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
         at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:713)
         at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:370)
         at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:871)
         at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:453)
         at com.evermind.server.http.HttpRequestHandler.serveOneRequest(HttpRequestHandler.java:221)
         at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:122)
         at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:111)
         at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
         at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
         at java.lang.Thread.run(Thread.java:595)
    any help is greatly appreciated..
    Thanks.
    Message was edited by:
    user597582

    Most probably you are using the wrong Jdev and keep in mind that 10G versions are only for R12.
    Check the metalink Note 416708.1 - How to find the correct version of JDeveloper to use with eBusiness Suite 11i or Release 12.
    --Shiv                                                                                                                                                                                                                                                                                                                                                                                                                                                                                       

  • JC 3.0 crypto error when running the simulator from Netbeans

    Hi all
    I'm writing some crypto code using Netbeans 6.7 with the JC plug-ins and I have a problem when trying to run the applet from netbeans. The code is compiled without problems, but when trying to run it I get the NO_ALGORITHM exception.
    I'm not using a real card, I'm just using the virtual JC provided by the JCDK and Netbeans. Could it be that the Reference Implementation that is shipped with JCDK 3.0 does not support MD5 or SHA-1? Or is it a configuration problem, and I must configure some policy file in order to be able to use crypto capabilities? My code without the crypto part is running ok. Here's an excerpt of the code:
    MessageDigest md5;
    try{
    md5 = MessageDigest.getInstance(MessageDigest.ALG_MD5, false);
    catch(CryptoException e)
    // I always get to this part...
    Did any of you get to run a crypto application using Netbeans 6.7 and JC3.0?
    Thanks in advance.
    A_Martin

    Hi again
    After doublechecking the JC 3.0.1 documentation, I've found the following statement (user guide, page 128):
    "The implementation of security and cryptography in version 3.0.1 of the RI supports the use of the following classes:"
    And then a list of classes and supported algorithms is included. Shouldn't that mean that SHA1 (which is on the list) should work with the virtual JC?
    Best regards.
    A_Martin

  • Error when running a scenario from Command Prompt

    Hi I edited the parameter file and I am trying to run an interface that joins two tables from HR schema and loads into a table in different schema. I am able to run this in the Designer, but I receive an error message when I try to run it through command prompt.
    Here is the error message I get when I try to run it
    09/09/2009 11:58:42 AM(main): Creating session for scenario:DEMO_INTERFACE - 001
    09/09/2009 11:58:42 AM(main): Session : 88010 is running
    com.sunopsis.core.SnpsInexistantObjectException: There is no connection for this
    logical schema/context pair:HR / GLOBAL
    at com.sunopsis.dwg.dbobj.SnpConnect.getSnpConnectByLSchemaNameAndContex
    t(SnpConnect.java)
    at com.sunopsis.dwg.dbobj.SnpConnect.getSnpConnect(SnpConnect.java)
    at com.sunopsis.dwg.dbobj.SnpSession.getDwgConnectLst(SnpSession.java)
    at com.sunopsis.dwg.dbobj.SnpSession.getConLst(SnpSession.java)
    at com.sunopsis.dwg.cmd.DwgCommandScenario.treatCommand(DwgCommandScenar
    io.java)
    at com.sunopsis.dwg.cmd.DwgCommandBase.execute(DwgCommandBase.java)
    at com.sunopsis.dwg.cmd.e.i(e.java)
    at com.sunopsis.dwg.cmd.e.y(e.java)
    at com.sunopsis.dwg.DwgJv.treatCmd(DwgJv.java)
    at com.sunopsis.dwg.DwgJv.main(DwgJv.java)
    at oracle.odi.Agent.main(Agent.java)
    09/09/2009 11:58:43 AM(main): Session : 88010 finished with return code : -1
    com.sunopsis.core.SnpsInexistantObjectException: There is no connection for this
    logical schema/context pair:HR / GLOBAL
    at com.sunopsis.dwg.dbobj.SnpConnect.getSnpConnectByLSchemaNameAndContexur
    t(SnpConnect.java)
    at com.sunopsis.dwg.dbobj.SnpConnect.getSnpConnect(SnpConnect.java)
    at com.sunopsis.dwg.dbobj.SnpSession.getDwgConnectLst(SnpSession.java)
    at com.sunopsis.dwg.dbobj.SnpSession.getConLst(SnpSession.java)
    at com.sunopsis.dwg.cmd.DwgCommandScenario.treatCommand(DwgCommandScenar
    io.java)
    at com.sunopsis.dwg.cmd.DwgCommandBase.execute(DwgCommandBase.java)
    at com.sunopsis.dwg.cmd.e.i(e.java)
    at com.sunopsis.dwg.cmd.e.y(e.java)
    at com.sunopsis.dwg.DwgJv.treatCmd(DwgJv.java)
    at com.sunopsis.dwg.DwgJv.main(DwgJv.java)
    at oracle.odi.Agent.main(Agent.java)
    DwgJv.main: Exit. Return code:-1
    Thank you for your help.
    Kranthi

    Hello,
    Try to remove and recreate your package and scenario, I had the same issue and solved doing it.
    It seems for me that the package cannot update its contents, for example, if you change something in your interface, you must recreate your package and scenario to update the changes.
    What ODI version do you use? If you use an old version, try to update to ODI 10.1.3.5
    Regards,
    Wallace Galvão
    São Paulo - Brazil

  • Error when run the form from jdeveloper

    Dear All ,
    I am a beginner i OA framework and i run the hello world page from jdeveloper but it gave me the following error
    "You have encountered an unexpected error. Please contact the System Administrator for assistance. "
    what should i do to solve this problem ??

    You can get that error for a mulititude of reasons...are you sure you've set up the environment for J-Developer correctly? Is your HOME set correctly? Are you running the correct version of the tool? Is the database connection correct? Did you test it? Do you have the correct Application connection? Do you have an APPS login to the correct responsibility? Does that work? Are you using the correct responsibility key? The list just goes on and on and on.
    CJ

  • Error when running dbms_stats.gather_database_stats from dbms_job?

    I had an issue with the default oracle job to analyze the database. I opened a metalink ticket and they said there is a known bug in 10.1.0.3 with the default oracle job and it does not work.
    I am not allowed allowed to update. so the work around was to run this from dba_jobs.
    I have this job created as system and run it manually...
    dbms_stats.gather_database_stats(cascade => TRUE,method_opt => 'FOR ALL COLUMNS SIZE AUTO',
    degree=>8 )
    I can execute this when logged in as system.
    When I try to execute the job I get:
    ORA-12012: error on auto execute of job 26ORA-20000: Insufficient privileges to analyze an object in DatabaseORA-06512: at "SYS.DBMS_STATS", line 12086ORA-06512: at "SYS.DBMS_STATS", line 12425ORA-06512: at "SYS.DBMS_STATS", line 12567ORA-06512: at "SYS.DBMS_STATS", line 12531ORA-06512: at line 1This is running as system?
    The table I don't have access to is located in someones schema.
    log_user,priv_user, and schema_user are all system...
    Why can I run this manually and not through a job?
    Edited by: Guess2 on Jul 21, 2009 9:15 AM
    Edited by: Guess2 on Jul 21, 2009 9:16 AM

    The table I get an error on is not partitioned.
    I also do not get a exception when I run that procedure manually as system, but when I run it from dba_jobs, I get an insufficient privileges issue.

  • Error when running. / runInstaller to install clusterware

    I'm trying to install Oracle Clusterware 10.2 as a prerequisite for a new RAC environment, my installation is on oracle linux 5 U 7, but when I try to run ". / RunInstaller" an error occurs, i can not pinpoint the error, and I should correct, please can someone give some idea.
    The error message is:
    :. / RunInstaller: line 101: / home / oracle / install / clusterware_for: No such file or directory.
    The line refers to $ 101 CMDDIR / install / * $-.oui formCluster.
    tks.
    Italo Moisés dos Santos.
    Edited by: 893012 on 24/10/2011 15:01

    The problem was that the path to the installer was great, so the message no such file or directory, in my view after starting to install Oracle Clusterware not find the files for installation. I changed the name of the folder containing the files and everything worked.

  • Error when running scheduled refresh from SQL Azure data

    I have a PowerPivot that connects to a SQL Azure database table.  I added the username and password in the PowerPivot connection.  It refreshed fine manually straight from PowerPivot.  However, when I upload the excel file to Power BI
    and I schedule a refresh, it fails with the following error message:
    Sorry, something went wrong. Please try again. Correlation ID: d43f07fc-cc0c-461c-b25e-68e866a2a911
    I went through this FAQ (http://office.microsoft.com/en-us/office365-sharepoint-online-enterprise-help/scheduled-refresh-faq-HA104180763.aspx#_Toc388441416)
    and the steps have me also saving the password in the connection string.  However the connection string (under tab Data->Connections) is grayed-out and I am unable to enter the password.
    Thanks for your help...

    Hi,
    When you refresh in Excel client, do you get a prompt for the password?
    What worked for me in the past, is the following process:
    1. Within PowerPivot, get the data but don't save the password there.
    2. Once you get the data go back to Excel, switch to Data ribbon >> Connections, and select the connection(s) that were created in PowerPivot and select to save the password.
    3. Refresh the data (it will prompt for the password), save the file.
    4. Just to be sure, open the file again, refresh and see that it is not prompting for a password.
    GALROY

  • Connection error when running sql*plus from within a Makefile

    As part of our build process the commands to install/update our database schema are executed from a Makefile (along with all the other build/test commands). We've been running our build under several system configurations, but have hit a hitch with one specific one. So far this has worked with Windows XP (cygwin) against a Express Edition DB and Red Hat ES 5 against Oracle 11g.
    I am now trying to get the build running on a Ubuntu 8.04 workstation with the Oracle Express Edition installed. From the command line I can execute a simple command line such:
    echo "SELECT 5 as foo from dual"|sqlplus user/password
    Now if I put the same command in a Makefile, I receive the following error message:
    ERROR:
    ORA-01034: ORACLE not available
    ORA-27123: unable to attach to shared memory segment
    Linux Error: 22: Invalid argument
    Additional information: 1
    Additional information: 32769
    This error seems to pop up a lot when a client is not properly configured (atleast the googling I've done has said as much), but my client is clearly working as I can connect outside of the Makefile. Is there possible some info that gets lost when make executes the process? Any ideas of what I could do to fix this?

    see 115753.1 note on metalink , it clearly explains why you are encountering this .

  • !ApolloLaunchDelegate.cannotFindProject! error when running air application from ide.

    Hi,
    I'm using the plugin version of flash builder 4 and when trying to debug/execute I get an !ApolloLaunchDelegate.cannotFindProject! error :/. Do anybody know what's happening or how I could solve this?
    I've been working with this for web applicactions during 6 months without problems, and it still works for web apps but not for air ones.
    Thanks in advance,
    Aron.

    Hey Chris,
    This shouldn't be a influence hopefully. We also had her remove any leftover files for the Picaboo client and Air, for Picaboo that would be under User > Library > Preferences.
    For Air we had her go under Library > Frameworks, and delete Adobe Air.framework.
    Do you have another location in mind for Air we should look at?
    Thanks.

  • "input/output error' when making disc image from DVD

    I've had problems installing Logic, and a Pro Apps Genius at Applecare suggested I try making an image of the problematic DVD (Audio Content 1) and then trying an install that way.
    While I can make an image of the Install disc to my desktop fine, the Audio Content 1 disc reports an "input/output error".
    This means I'm unable to copy the disc and then successfully install my Logic Studio.
    Any ideas?

    Thanks for your answer.
    Yes, I thought that might be the case - but I'd taken my Mac and Logic disks to a Genius bar, and the 'Genius' had said he'd fixed the issue. I just wish he'd explained what he did and why he didn't replace the faulty disk(s)!
    But is there any way around having the claim a disk, now I'm living abroad and my 'warrantee' has run out? It's going to be a pain in the fundament trying to claim a replacement set.

  • Error when running  the ant task

    Hi,
    I got an error when running the ant from jdeveloper .I was running the to build my J2EE module which is build in Java 1.4 . I have changed my java home to JDK 1.4 and then run the ant build i got the following error .The class and ejbc compilation is completing nicely but the error is happening at jar creation .Please help me . One more thing ,when i run the ant task from the command prompt ,it is working fine .
    AuditSearchVO), audit(com.ibsplc.iRes.audit.vo.BaseAuditVO)] >
    [java] java.io.IOException: CreateProcess: javac -nowarn -classpath D:\applns\bea\jdk142_08\jre\lib\rt.jar;D:\applns\bea\jdk142_08\jre\lib\i18n.jar;D:\applns\bea\jdk142_08\jre\lib\sunrsasign.jar;D:\applns\bea\jdk142_08\jre\lib\jsse.jar;D:\applns\bea\jdk142_08\jre\lib\jce.jar;D:\applns\bea\jdk142_08\jre\lib\charsets.jar;D:\applns\bea\jdk142_08\jre\classes;D:\Project\Development\aiRES1.7\classes;D:\Project\Development\aiRES1.7\ibase.jar;D:\applns\bea\weblogic81\server\lib\weblogic.jar;D:\applns\bea\weblogic81\server\lib\wlcipher.jar;D:\applns\bea\weblogic81\server\lib\jsafeFIPS.jar;D:\applns\bea\weblogic81\server\lib\webservices.jar;D:\applns\bea\weblogic81\server\lib\xmlx.jar;D:\applns\bea\weblogic81\server\lib\jconn2.jar;D:\applns\bea\weblogic81\server\lib\jConnect.jar;D:\applns\bea\weblogic81\server\lib\EccpressoAsn1.jar;D:\applns\bea\weblogic81\server\lib\EccpressoCore.jar;D:\applns\bea\weblogic81\server\lib\EccpressoJcae.jar;D:\applns\bea\weblogic81\server\lib\ant\ant.jar;D:\applns\bea\weblogic81\server\lib\ant\optional.jar;D:\applns”
    [java]      at java.lang.Win32Process.create(Native Method)
    [java]      at java.lang.Win32Process.<init>(Win32Process.java:66)
    [java]      at java.lang.Runtime.execInternal(Native Method)
    [java]      at java.lang.Runtime.exec(Runtime.java:566)
    [java]      at java.lang.Runtime.exec(Runtime.java:491)
    [java]      at java.lang.Runtime.exec(Runtime.java:457)
    [java]      at weblogic.utils.Executable.exec(Executable.java:227)
    [java]      at weblogic.utils.Executable.exec(Executable.java:156)
    [java]      at weblogic.utils.Executable.exec(Executable.java:142)
    [java]      at weblogic.utils.compiler.CompilerInvoker.execCompiler(CompilerInvoker.java:249)
    [java]      at weblogic.utils.compiler.CompilerInvoker.compileMaybeExit(CompilerInvoker.java:428)
    [java]      at weblogic.utils.compiler.CompilerInvoker.compile(CompilerInvoker.java:328)
    [java]      at weblogic.utils.compiler.CompilerInvoker.compile(CompilerInvoker.java:336)
    [java]      at weblogic.ejb20.ejbc.EJBCompiler.doCompile(EJBCompiler.java:270)
    [java]      at weblogic.ejb20.ejbc.EJBCompiler.compileEJB(EJBCompiler.java:476)
    [java]      at weblogic.ejb20.ejbc.EJBCompiler.compileEJB(EJBCompiler.java:397)
    [java]      at weblogic.ejbc20.runBody(ejbc20.java:517)
    [java]      at weblogic.utils.compiler.T

    Hi,
    I got an error when running the ant from jdeveloper .I was running the to build my J2EE module which is build in Java 1.4 . I have changed my java home to JDK 1.4 and then run the ant build i got the following error .The class and ejbc compilation is completing nicely but the error is happening at jar creation .Please help me . One more thing ,when i run the ant task from the command prompt ,it is working fine .
    AuditSearchVO), audit(com.ibsplc.iRes.audit.vo.BaseAuditVO)] >
    [java] java.io.IOException: CreateProcess: javac -nowarn -classpath D:\applns\bea\jdk142_08\jre\lib\rt.jar;D:\applns\bea\jdk142_08\jre\lib\i18n.jar;D:\applns\bea\jdk142_08\jre\lib\sunrsasign.jar;D:\applns\bea\jdk142_08\jre\lib\jsse.jar;D:\applns\bea\jdk142_08\jre\lib\jce.jar;D:\applns\bea\jdk142_08\jre\lib\charsets.jar;D:\applns\bea\jdk142_08\jre\classes;D:\Project\Development\aiRES1.7\classes;D:\Project\Development\aiRES1.7\ibase.jar;D:\applns\bea\weblogic81\server\lib\weblogic.jar;D:\applns\bea\weblogic81\server\lib\wlcipher.jar;D:\applns\bea\weblogic81\server\lib\jsafeFIPS.jar;D:\applns\bea\weblogic81\server\lib\webservices.jar;D:\applns\bea\weblogic81\server\lib\xmlx.jar;D:\applns\bea\weblogic81\server\lib\jconn2.jar;D:\applns\bea\weblogic81\server\lib\jConnect.jar;D:\applns\bea\weblogic81\server\lib\EccpressoAsn1.jar;D:\applns\bea\weblogic81\server\lib\EccpressoCore.jar;D:\applns\bea\weblogic81\server\lib\EccpressoJcae.jar;D:\applns\bea\weblogic81\server\lib\ant\ant.jar;D:\applns\bea\weblogic81\server\lib\ant\optional.jar;D:\applns”
    [java]      at java.lang.Win32Process.create(Native Method)
    [java]      at java.lang.Win32Process.<init>(Win32Process.java:66)
    [java]      at java.lang.Runtime.execInternal(Native Method)
    [java]      at java.lang.Runtime.exec(Runtime.java:566)
    [java]      at java.lang.Runtime.exec(Runtime.java:491)
    [java]      at java.lang.Runtime.exec(Runtime.java:457)
    [java]      at weblogic.utils.Executable.exec(Executable.java:227)
    [java]      at weblogic.utils.Executable.exec(Executable.java:156)
    [java]      at weblogic.utils.Executable.exec(Executable.java:142)
    [java]      at weblogic.utils.compiler.CompilerInvoker.execCompiler(CompilerInvoker.java:249)
    [java]      at weblogic.utils.compiler.CompilerInvoker.compileMaybeExit(CompilerInvoker.java:428)
    [java]      at weblogic.utils.compiler.CompilerInvoker.compile(CompilerInvoker.java:328)
    [java]      at weblogic.utils.compiler.CompilerInvoker.compile(CompilerInvoker.java:336)
    [java]      at weblogic.ejb20.ejbc.EJBCompiler.doCompile(EJBCompiler.java:270)
    [java]      at weblogic.ejb20.ejbc.EJBCompiler.compileEJB(EJBCompiler.java:476)
    [java]      at weblogic.ejb20.ejbc.EJBCompiler.compileEJB(EJBCompiler.java:397)
    [java]      at weblogic.ejbc20.runBody(ejbc20.java:517)
    [java]      at weblogic.utils.compiler.T

Maybe you are looking for