Please maintain period indicators for language SV

Hi experts
Any idea who would customise +Maintain display type for date/period+  setting in the system
It comes under--SPRO>Materials Management>Purchasing>Environment Data>Maintain Display Type for Date/Period.
I need to maintain this setting as i am getting this error during the PO creation.
Here is the error -"Please maintain period indicators for language SV".
Complete error message:
Please maintain period indicators for language SV
Message no. 06255
Diagnosis
The period indicators (identifiers for day, month, week) have not been maintained in the document language &. They are needed for the document printout.
Procedure
To prevent the print program from aborting due to the missing table entries, you must supply the relevant indicators.
To find out how to do this, refer to the IMG
Maintain display type for date/period
Thanks
Dkmurthy

Hi Dkmurthy,
please insert the following entries in the Customizing :
Lang.       del.date     datcat       descr.                       printout
SV     K     5     Kalenderformat     Kalend
SV     M     3     Månadsformat     Månad
SV     P     4     Periodformat     Period
SV     T     1     Dagsformat     Dag
SV     W     2     Veckoformat     Vecka
Regards,
Mauro

Similar Messages

  • Control indicators for controlling area XYZ1 do not exist". Pls help.

    While Posting to the Customer Downpayment thru t code F-29. following error occured "Control indicators for controlling area XYZ1 do not exist". Pls help.

    Hi,
    You forgot to maintain control indicators for the controlling area. Go to OKKP transaction, select the controlling area and maintain the indicators...
    Regards,
    Eli

  • Maintainance tasks for language package installed

    Hi All,
    May I ask inputs regarding installing language package. Basically, below are my questions.
    - Are there any maintainance activities required following installation of a language package in the system?
    - Are there any annual support packs for language packages?
    - Say our ECC is EHP5 and we installed new language in our system, then we upgraded the same system to EHP6. Are there any activities that needs to be performed because of the upgrade even if the language is already installed in the system prior to the upgrade?
    - Do difference in language installed in the systems affect the copied xml file during upgrade? Meaning, say we have dev and QA ecc system. We created stack file for dev for the ehp6 upgrade. Using that stack xml, upgrade dev system. Then a decision is made to install new language in the system. Thus it is installed in upgrade dev, and not upgraded QA. Now, we copy the stack xml file use in dev to be converted for QA. Would there impact on the upgrade process?
    I would appreciate your inputs on the queries. Thanks.
    Regards,
    Philip

    Hi Philip,
    - It depends on what you did exactly during this installation. Could you please list the steps taken?
    - There are no annual support packs. Language packages are shipped with every release of a new Support Package, with updates and corrections of the existing content (if any).
    - With SPs as with EhPs, you will need to reinstall the language files for your system. It is hopefully rather quick as a follow-up step (not saying that the initial language deployment is tedious and hard work, but... Well, yes, it is) if you have not performed any translation activities in your installation.
    - I don't think so since languages do not seem to be included in the stack (which would actually be counter-productive, dangerous and a dozen unnamable negative linguistic adjectives).
    Hope that helps!
    Sylvain

  • BP J02 error.. Please maintain target language

    hi guys,
        im activating the Swiss BP & when i try to activate the J02 Building Block.. i get a error...
    "*   Target Language not maintained - Red light"
    "Please maintain target language"

    Hi Dkmurthy,
    please insert the following entries in the Customizing :
    Lang.       del.date     datcat       descr.                       printout
    SV     K     5     Kalenderformat     Kalend
    SV     M     3     Månadsformat     Månad
    SV     P     4     Periodformat     Period
    SV     T     1     Dagsformat     Dag
    SV     W     2     Veckoformat     Vecka
    Regards,
    Mauro

  • Exc. tax ind. not maint. for 1 J_1IEXESTA - please maintain

    Dear friends,
    Please help.
    Below is the error when i was trying to create order
    <b>Exc. tax ind. not maint. for 1 J_1IEXESTA - please maintain
    Message no. 8I004
    Diagnosis
    The excise tax indicator is not maintained for the specific combination. The indicator is needed to determine the excise duty rate.
    Procedure
    Cancel the document.
    Maintain the combination with the final indicator in the table.</b>

    Dear Antima
    As I said earlier, go to SM30, give the table J_1IEXESTA  and select "Maintain".  Now it will take you to a screen, wherein, you have to maintain as under:-
    Indicator for co::::::::indicator for cust::::::::Excise tax indicator
                                 1:::::::::::::::::::::::::::::::::1:::::::::::::::::::::::::::::::::::::1
                                 1:::::::::::::::::::::::::::::::::2:::::::::::::::::::::::::::::::::::::2
                                 1:::::::::::::::::::::::::::::::::3:::::::::::::::::::::::::::::::::::::3
                                 2:::::::::::::::::::::::::::::::::1:::::::::::::::::::::::::::::::::::::1
                                 2:::::::::::::::::::::::::::::::::2:::::::::::::::::::::::::::::::::::::2
                                 2:::::::::::::::::::::::::::::::::3:::::::::::::::::::::::::::::::::::::3
                                 3:::::::::::::::::::::::::::::::::1:::::::::::::::::::::::::::::::::::::1
                                 3:::::::::::::::::::::::::::::::::2:::::::::::::::::::::::::::::::::::::2
                                 3:::::::::::::::::::::::::::::::::3:::::::::::::::::::::::::::::::::::::3
    For information, 1 is nothing but 100% tax, 2 is 50% and 3 is nil duty. 
    Thanks
    G. Lakshmipathi

  • Exc. tax ind. not maint. for 1 1 - please maintain-Message

    Hi
    While creating Sale order , I am getting following message
    what could be the reason, IN some cases only i am getting this message in CIN Scenario.We are using TAXINJ.and version is ECC6.00
    Exc. tax ind. not maint. for 1 1 - please maintain
    Message no. 8I004
    Diagnosis
    The excise tax indicator is not maintained for the specific combination. The indicator is needed to determine the excise duty rate.
    Procedure
    Cancel the document.
    Maintain the combination with the final indicator in the table.
    thanks
    Bijaya Pradhan

    Dear Antima
    As I said earlier, go to SM30, give the table J_1IEXESTA  and select "Maintain".  Now it will take you to a screen, wherein, you have to maintain as under:-
    Indicator for co::::::::indicator for cust::::::::Excise tax indicator
                                 1:::::::::::::::::::::::::::::::::1:::::::::::::::::::::::::::::::::::::1
                                 1:::::::::::::::::::::::::::::::::2:::::::::::::::::::::::::::::::::::::2
                                 1:::::::::::::::::::::::::::::::::3:::::::::::::::::::::::::::::::::::::3
                                 2:::::::::::::::::::::::::::::::::1:::::::::::::::::::::::::::::::::::::1
                                 2:::::::::::::::::::::::::::::::::2:::::::::::::::::::::::::::::::::::::2
                                 2:::::::::::::::::::::::::::::::::3:::::::::::::::::::::::::::::::::::::3
                                 3:::::::::::::::::::::::::::::::::1:::::::::::::::::::::::::::::::::::::1
                                 3:::::::::::::::::::::::::::::::::2:::::::::::::::::::::::::::::::::::::2
                                 3:::::::::::::::::::::::::::::::::3:::::::::::::::::::::::::::::::::::::3
    For information, 1 is nothing but 100% tax, 2 is 50% and 3 is nil duty. 
    Thanks
    G. Lakshmipathi

  • Need to maintain 4 plants for one sales organization ? Please help ?

    I have one India Sales organization and 4 different plants which can deliver the goods.
    For eg. IS01 = Sales organization. &
    P001= Plant 1
    P002= Plant 2
    P003= Plant 3
    P004= Plant 4.
    Now the problem here is when i maintain material for combination (MM01) P001, IS01 & DC - 10; the delivering plant in sales org view 1 = P001.
    Then, while maintaining (MM01) combination for P002, IS01 & 10, the delivering plant should be P002 but it shows P001. If I change the delivering plant to P002 it also changes the delivering plant in first combination (P001 to P002).
    I just wanted to know 1. Is it possible to deliver goods from different plants under 1 sales organization ( I guess yes) ?
    2. If yes, then how should i maintain delivering plant in various combination as per my requirement ?
    Please provide your suggestions experts ?
    Thanks.

    Hi,
    I just wanted to know 1. Is it possible to deliver goods from different plants under 1 sales organization ( I guess yes) ?
    Yes.
    2. If yes, then how should i maintain delivering plant in various combination as per my requirement ?
    Please provide your suggestions experts ?
    First create a material in MM01 with a combination of P001, IS01 & DC - 10; the delivering plant in sales org view 1 = P001. then you need to extend the same material to below different plants by using  MM01 T-coce
    P002= Plant 2
    P003= Plant 3
    P004= Plant 4.
    Go to MM01 give the same material press enter it will through warning message "Material type & Industry sector copied from Master record"
    then choose same material number and type in "Copy from" then press enter
    automatically select view tab will come with previous selection then click on continue.
    one more  organisation levels tab will open
    In copy from option maintain-PLANT-P001/STORAGE LOCATION/SALES ORG-IS01/DC-10
    then maintain left side "Organizations level" maintain-PLANT-P002/STORAGE LOCATION/SALES ORG-IS01/DC-10
    click on continue.
    automatically master data will be copied from earlier material number.
    just press enter and save it and repeat the same steps for the other plants P003 & P004 in MM01.
    Thanks,
    Krishna.

  • Please maintain  the master data for material during product cost collector

    hi
    i get a error
    please maintain  the master data for material during product cost collector
    please guide me
    regards
    leo

    Hi Leo,
    Can you elaborate your issue, like when did you get the error exactly?
    If it is the error you got while creating Product Cost Collector, then this is not the right Forum to post.
    Please post your question in the 'ERP Manufacturing (PP)' forum
    Regards,
    Manimaran M

  • I need to use flash for language studies, please help

    what to use to get flash for language study?

    Flash is not supported on the iPad - and as Adobe have announced that they are stopping development on all mobile versions of it, it probably never will be.
    Do the sites that you want to use have non-flash versions and/or have their own app in the iTunes app store ? If not then browser apps such as Skyfire, iSwifter, Puffin and Photon 'work' on some sites, but judging by their reviews not all sites.

  • Error as unit of measure PC not defined for language RO while creation ofPO

    Hi GUYS,
    When am trying to create a PO in ME21N transaction i got error as below,
    unit of measure PC not defined for language RU
    Message no. 06079
    Table 006A contains no entry for this unit of measure
    Please let me know what action to be taken from my side to over come this issue.
    Note: If i check the related vendor i could able to view that the language maintained as RU.
    Cheers,
    Kumar.S

    Hi Jurgen,
    Thanks for your reply once again.
    As mentioned by you earlier i have tried to login with languae RU in Q system but unfortunately i got an error saying taht language not installed.
    Also we found for Language - EN and UOM - PC has been maintianed in T006A table.But if i check for lanugage - RU and UOM PC combinatoin has not manintaned in T006A table.
    Please let me know how to maintain the values in this table T006A for combination Lang - RU and UOM - PC.
    Please revert back with your soilution.
    Note: I have tried in SM30 but failed due to below error
    The maintenance dialog for T006A is incomplete or not defined
    Cheers,
    Kumar.S

  • Unit of measure PCS not defined for language FR

    Dear Gurus,
    I try to raise a PO in ME21N, when saving the order, I am being prompted by the system with the following message:
    "Unit of measure PCS not defined for language FR"
    I then went to MM02 to check the material master data "Sales Text" Tab.
    There the only language available is English, so I clicked on the "Language Maintained" Tab and created a new language for French.
    The problem is that when I want to save the changes, the system prompts me with the following message:
    "Blank texts exist in the following languages: French and English, these texts will be deleted"
    Then the Material Master Data closes and no changes have been made.
    Can you please guide me through step by step of what I have to do to be able to populate the field "PCS" for pieces in French so that it is taken into account in the Material Master Data and by extension in a PO.
    Thanks for your help.
    KInd regards
    Chris

    Hi Chris,
    Goto T code CUNI. In the first screen click on GOTO-Translation-dimension.
    Enter EN in Source language and FR in Target.Maintain the entry there.

  • PO output medium as 'External Send' for Language BG giving '#' instead of character in PDF output

    Hi Experts,
    When we maintain the PO output medium as ‘External Send’ for Language ‘BG’, the PO pdf is showing # instead of character.
    But, if the output medium is PRINT and language is ‘BG’, the PO pdf prints correctly in BG language.I have checked the output type
    NEU and find that same smartform is maintained for both the case.
    Also it is working fine in the Quality as well as in development server.. issue is coiming only in PRD.
    Thanks in advance!!
    Regards
    Mrinal

    Hi,
    PLease review the steps from SAP note 191470.
    Best Regards,
    Arminda Jack

  • Maintain Text in Different Language

    Hi PS Expert,
    I have query for maintaining text in multiple language, let me elaborate my query..
    I created std project having all WBS element & maintain WBS Text ( description) in English lanuage.Now my client prefers that if a person in other country log into SAP in German language then he should see all description in German language.
    I have one solution that log into SAP in German Language & maintain all text again in German language. This will be just repeatition of the work what I did in English language.Client wants to maintain all text in 6 language & I have to repeat the same work 6 times.
    If you have come across such issue , please tell me about your solution.
    Regards,
    Ashok Sangal

    Hi Ashok
    Activate business function OPS_PS_CL1
    Multi language support has to be activated fro the Object ML(IMG-->Project system-->activate multi language support)
    when you create a new PS object , a new tab short text appears, in which you can maintain different language keys and description
    so when ever user logs in different language then the description of PS object will appear in that language if it is maintained in short text tab
    vijay

  • Control indicators for controlling area IBM1 do not exist

    hi,
    Can any one tell me abt this plz--
    Control indicators for controlling area IBM1 do not exist
    Message no. KI102
    Role VN not defined in master record for vendor SITA
    Effective price is 802.01 INR, material price is 1,000.00 INR
    Please help me
    Thanks And Regards,
    Swathi

    Hi,
    Go to "OKKP" and maintain under option "Activate components/control indicators"

  • Control indicators for controlling area 1573 do not exist

    Hello All
    Control indicators for controlling area 1573 do not exist
    Message no. KI102
    Diagnosis
    No control indicators exist in fiscal year 2009 for controlling area 1573.
    System Response
    No further processing is possible without valid control indicators in the controlling area.
    Procedure
    Check your entries or define control indicators for controlling area 1573, fiscal year 2009 in configuration. Make sure that the fiscal year in the control indicators is a "from" fiscal year
    1573 is my company code as well as my controlling area
    This is happening in my sandbox server from to day morning only as it looks like somebody has tampered the settings which doesnot allowing me to create a sales order itself to do any testing
    I am totally handicapped and without solving this error i will not be able to proceed at all
    This error has come for the first time whilre creating the sales order
    Waiting for your valuable inputs
    Regard
    Raja

    Hi,
    Please go to OKKP and see the validity period of controlling area FROM year to TO year.
    OKKP
    Select controlling area
    Double click
    Activate components/control indicators.
    I believe somebody must have deleted the year.
    You need to enter the control indicators FROM year to TO year.
    Please let me know if you still have issues.
    Regards,
    Ravi

Maybe you are looking for

  • LV 7.1 - How can I use installer to create folder with its files included w/o adding each file?

    I have several files to place in folders created by the installer. Can't seem to see how I can avoid adding each file individually at build time. Is there an easier way to do this? Simply "adding" a folder would be a solution. Thanks Fran

  • Hitachi PJ-TX300 projector and Mac Mini Intel Core 2 Duo?

    My PJ-TX300 projector is hooked up via its PC connector to my Mac Mini Intel Core 2 Duo, via a DVI to VGA adapter (which came with the Mini from Apple) plugged into the Mac mini. I cannot get a clear screen picture at any resolution: there is always

  • Direct to page in apex

    Hello every one, In a page, there are two region. there are two buton. one of them is in a region. one of them is in another region. and there are two select list. select list is for selecting year. when i select year and push to buton in first regio

  • MANAGED RECOVERY AT STANDBY DATABASE REQURING OLD ARCHIVELOGS ORA-00308

    Oracle 9.2.0.4 HP-UX 11.11i The database in Archivelog mode, single standby database in managed recovery mode. keeping standby in sync with manual applying the ARCHIVELOG from primary to standby database. primary database was 3 REDO log members of 10

  • How to start clusterware in 11gR1

    Hi, I am new to RAC. One of test server rebooted and cluster services didn't come up. I tried to start the services using "crsctl start crs", but getting below ouput. [root@apl06611d001 bin]# ./crsctl start crs Attempting to start Oracle Clusterware