Please make it easier to position images in height and have them adapt to browser width!

Maybe I'm missing a method but I have now long enough stumbled on something I would think obvious to exist within the program.
I just want a highres intro image to pop up. i want to position it a bit down from the vertical center, but it should fill out left and right.
1. Tried using slide shows, but Lightbox won't autostart without clicking thumbnails first. Only fullscreen lightbox has this ability for some unexplicable reason. Please make the non fullres lightbox available for immediate popup without having to click thumbnail.
2. Tried using background browser fill. Works to a degree, but I can't control the image's vertical position.
3. Tried using a 100 % width box and fill it with my highres image. But this wont work for this utterly strange reason:
If I use a 960 px page width as my template, create a box 100% width, I try filling it with my image and tell it to scale to fill. But here's the bummer: If I resize my browser window to accomodate a 2560 px wide screen - my highres image was shredded when I assigned it to fill the 960 px wide box. It's looking a disaster at 2560 resolution. Please allow the image fill to retain it's original size and be able to rescale to smaller sizes instead.
Because downward scaling doesn't seem to work in fills.
So to boil it down: I want to be able to make a box and set it to 100 % browser width in the entry box, not having to graphically drag it out to whatever page width I'm currently using in Muse. I should be able to fill it with an image of any size, without Muse making any decision and downsampling my image, making it unusable for 100 % width display on high resolutions.
Please consider this!
T

>@Ian Lyons: I can't drag the panels but the scroll-wheel on my mouse works fine...far better than it did in LR1.
Agree--when LR is on the main display, but the scroll wheel does NOT work for scrolling the panels when LR is on the 2nd display. I don't know if this is intentional or an oversight or just a situation I experience, but I have experienced it with all versions of LR and in both XP and Vista.
Note that the scrolling of the side panels isn't the only thing that doesn't work properly with the scroll wheel when LR is on the 2nd display--the thumbnail panel doesn't scroll when on the 2nd display, either. However, using the scroll wheel to adjust brush sizes works fine on either display as does scrolling the thumbnails in the Grid view.

Similar Messages

Need software which can send images to my editor, have them make selections, share them with me so I can edit the images and send the final results back to them. Will Lightroom work?

Need software which can send images to my editor, have them make selections, share them with me so I can edit the images and send the final results back to them. Will Lightroom work?

What I would like to do is to use Lightroom as I have been doing with LR 5.7. Tag certain images to be shared to the Creative Cloud which my editor can then see and tag as to which she would like to see final versions of. In the best case, I would then see these tags and edit the images as appropriate and save the JPEGs back to the Cloud where she can download them for final production.
Possible?

The etag value \'\"1\"\' specified in one of the request headers is not valid. Please make sure only one etag value is specified and is valid.

I try to receive data from a SharePoint List by using REST Services. (_vti_bin/ListData.svc)
This approach worked fine for some days, until I get an error 400 with following error message:
"The etag value 1 specified in one of the request headers is not valid. Please make sure only one tag value is specified and is valid."
Hope anybody can help.
Many thanks in advance.

Hi,
According to your post, my understanding is that you had an issue about retrieve data form list using REST in SharePoint 2010.
I had created a simple demo to retrieve a list item, you can check with the following code snippets.
<script src="http://code.jquery.com/jquery-1.10.2.min.js" type="text/javascript"></script>
<script type="text/javascript">
_spBodyOnLoadFunctionNames.push("callCSOM");
function callCSOM()
$("#Button1").click(function()
ExecuteOrDelayUntilScriptLoaded(ready, "sp.js");
function getListItemById(webUrl,listName, itemId, success, failure) {
var url = webUrl + "/_vti_bin/listdata.svc/" + listName + "(" + itemId + ")";
$.ajax({
url: url,
method: "GET",
headers: { "Accept": "application/json; odata=verbose" },
success: function (data) {
success(data.d);
error: function (data) {
failure(data.responseJSON.error);
function ready(){
getListItemById('http://sp','ListB',2,function(data){
alert(data.Title);
function(error){
console.log(JSON.stringify(error));
</script>
<input id="Button1" type="button" value="Run Code"/>
Thanks,
Jason
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Jason Guo
TechNet Community Support

When trying to connect airport express keep getting unexpected error please try again. IVE TRIED A HUNDRED TIMES AND HAVE FOUND SUPPORT PAGES UNHELPFUL

when trying to connect airport express keep getting unexpected error please try again. IVE TRIED A HUNDRED TIMES AND HAVE FOUND SUPPORT PAGES UNHELPFUL

Have you tried using a WEP password for your wireless network instead of a WPA one? That fixed it for me.

Taking images from Photoshop and taking them to Dreamweaver

Why is it that when i take my images from photoshop and save them for the web, that when i open them in my dreamweaver html file they have lost quality and saturation in the image?

There are 2 ways to do it correctly one is better then the other. The best way to bring an image into
DW is to first create a layer based sliced and the copy & paste it direc
tly into DW. When you do that you will get a Image optimize window, this is a built-in Firework image
optimizer it does a much better job a maintaing quality will compressing image size. The second optioin is to use the save to web feature. Tehy work the same DW/FW does it better. If your image quality still is not what you want play around with your optimization settings without seeein the image I can't recommend the best setting but play around in your 2up/4up window.

V12 Panorama: Wrong time - Please make it easy to use the Organizer

When performing with V12 my first Panorama Merge, the resulting panorama Merge got the wrong time assigned (in V8, I did not encounter that problem). With V12, the two source jpeg photo files that were merged into the panorama have a timestamp of 4/5/2013 12:59. However the resulting panorama jpeg file has a timestamp of 4/5/2013 10:59. This result in one additional manual operation, that i must perform after completion of the Panorama Merge: I must correct the time.
I am not sure how that time difference of two hours happened. Is it because I am in Switzerland, where we have still the Summer time and are ahead by two hours from Greenwhich Mean Time?
I have a kind request for the next Version of PSE: avoid to make it difficult and painfull to use the PSE Organizer in conjunction with Photomerge Panorama. Today, without technical reason/merit, use of the PSE Organizer in conjunction with Photomerge Panorama is extremely painful and inefficient. For each result of a Panorama Merge, I have to do all of the following and that is very inefficient (especially with large catalogs) and painfull:
I must find within the Organizer bin the result of the Photomerge (to do that, I typically need to switch the Photo Bin into Import Batch sequence...and then later on switch back to a more reasonable sequence)
I must verify and then correct manually the time of the resulting photomerge file
I must determine which tags were assigned to the individual component/source files, navigate within my large Tag structure to find the tags, and then assign manually to the photomerge result the Tags of the source photos
I must deternmine in which Album(s) the individual component/source files were included, navigate within my large Album hierarchical structure to find the Albums and then include manually the photomerge result into the same Album(s) as the source photo. Then I have to move the photomderge result to the right location within Album Sequence.
I must make sure, that the resulting jpeg file is stored in the same folder as the source photos.
All that is a real horror. I am sure, that all opf us (both from Adobe and from the PSE fan community) want to make it easy to use the Organizer.
Ideally, I would like to have (one? or multiple distinct/selective?) sticky options (in the Photomerge dialog pannel? in Preferences? at another location?) that would do all the above automatically for me.
Of course, I understand, that other PSE users will sometimes not like (as I also sometimes do not like) to have the same tags/Albums associations for the resulting photofile as for the compoenent/source files. But It is so much easier to remove selectively one or more Tag/Album association from a photo then to search a large Tag/Album Hierarchy for the correct Tags/Albums and then associate these Tags/Albums with the Photomerge Result.

Michel, Thank You for your answer.
Hopefully, Asobe development will make a distinction between:
- "missing functionality" (the alphanumeric sort which wes mising in V11), that requires new/additional code
- and "bugs" that are important (because in this case, the bug results in a Timestamp related dis-organization within the PSE Catalog) and can hopefully be fixed relatively easely.
Since the "date problem" that I had encountered orginally while performing a Panorama Merge is a general problem that is not related to Panorama Merge: for the date problem, I will open another Thread.
To come back to your excellent "suggestion" related to Photomerge Panorama: it is my impression that based on your idea/suggestion, the problem could be relatively easely fixed in V13.
To simplify a little bit: when performing a Panorama Merge, the Editor could record somewhere internally, the Identification (e.g. Filename and Foldername) of the Photos that are used as input for the Merge. And when later on, the PSE user performs a "Save As" or a "Close" of the resulting panorama, the Editor could offer to the user the option to save the Panorama File within a Versionset.
- in the simplest implementation: the Editor would choose without asking any question with which one of the Input Files the result should be saved into a Versionset
- in a little bit more more luxurious implementation: The Editor could ask the PSE user with wich ones of the Input Files the result should be saved into a Versionset
The PSE user, could (if he wish) later on remove the Panorama Merge from the Versionset. That Is easy and fast to do.
Of course, thanks to Michel, I have now an excellent Workaround. Myself do therefore not need an "official" solution in V13. But I nevertheless believe that a lot of other PSE users will not be aware of the suggestion of Michel and will therefore waste a lot of time for a proper "organizazion" of their Photomerge Panorama. It would be great, if PSE would complement the outstanding Photomerge Panorama support of the Editor with a good and simple-to-use/simple-to-understand support of the Panorams within the Organizer

A better way to differentiate positive vs. negative numbers and sum them ?

Hi, I wonder if there is a better or easier way to differentiate the positive numbers from negative ones and sum them respectively?
I come up with below:
create table t1 (num number, id varchar2(3));
insert into t1 values (-100, 1);
insert into t1 values (50, 2);
insert into t1 values (-10, 3);
insert into t1 values (-20, 4);
insert into t1 values (50, 5);
insert into t1 values (60, 6);
select sum(decode(sign(num), 1, num, 0)) plus, sum(decode (sign(num), -1, num, 0)) minu from t1;
PLUS   MINU
160     -130Any suggestion would be appreciated! Thanks

if there is a better or easier way to differentiate the positive numbers from negative ones and sum them respectively?Maybe you want them in different rows than in different columns:
SQL> select sign(num), sum(num) from t1 group by sign(num)
SIGN(NUM)   SUM(NUM)
         1        160
        -1       -130
2 rows selected.?

Please help, just recently got ios7 on my phone and have updated itunes but my iphone 4s wont sync i have tried everything like turning restrictions on and things, thank you for reading and please help

please help, just got iso7 and the new itunes and have synced my ipone once already all fine but suddenly it doesnt work i have tried everything like turning restrictions on and off , please help

fighter19lisa wrote:
that only makes it say its synced, when its not.
No, it does not. It transfers purchases from the iDevice to the computer. The computer must be authorized for the Apple ID that the content was acquired with.
fighter19lisa wrote:
my playlists wont show up on the phone.
Are they selected to sync? Is Manually Manage content on the device selected?
fighter19lisa wrote:
i had to change my password for my aol account again and i still cannot get my email on my phone to even work
What does that have to do with syncing content to the device? FYI, nothing.

How can I make title screens in either Illustrator or Photoshop and import them into Premiere Pro?

I'm having trouble finding the identical aspect ratio to import either an Illustrator or Photoshop title screen into Premiere Pro. There are so many ratios to choose from with Premiere Pro that I've about lost my mind. I was able to import Photoshop title screens into iMovie with no problem. I'll be importing the finished video into my YouTube channel. I want it to be widescreen but have no clue which ratio to use. Thanks for any help you can provide.

I always start with New Image in Photoshop, and then choose a Video Preset, that matches my PrPro Sequence. I use one with Guides. I usually choose to create that New Image with a Transparent Background.
Once complete, I just do a Save_As to PSD, which will be Imported into PrPro. If you have Ps Layers, you have two choices on Import: you can Import as Footage, which will Flatten your Layers, or you can Import as a Sequence to keep the Layers separate. Depending on what I will be doing, I might select one, or the other. If you Import as a Sequence, you can then animate each Layer individually.
Good luck,
Hunt

Countless of times apple id cannot be verified,please make it easy to learn

I feel discouraged after i purchased apple iPad wifi with cellular in my excitement to browse and enjoy the uniqueness of it I am made to verify my apple id for countless of times and that makes me lesser of a computer literate.
Please give me a solution to my misery. Thank you and good day.

What's more, after I purchased iOS apps with Apple ID (2), [email protected] was still able to receive mails about those purchases. It seems that there's some deeper but invisible connection between the email address and Apple ID, despite the disconnection from each other.

Edit images of acrobat and paste them into the same position

I have a problem when I want to paste an image edited with photoshop acrobat this is pasted into another position or inverted.
thanks for your help.
Jainor.

Mac: OS Mountain lion
PC: Windows 7
Version: 9 and 10
We perform image editing by right clicking, then edit, then modified it in photoshop and acrobat flight to return to, but change the position or inverted.
I was told that when you edit the default decision of the new sheet created in photoshop and that is why to paste into adobe changes.

Please make Windows 8 UI Reader able to comment and highlight

I use my Surface RT for studying and make use of a lot of pdf documents.Thank you so far for making the Windows 8 UI Version able to read comments and Show Highlights.But there is currently no really good Software out for studying. It would be so helpful if you can just add a toolbar which is static (if setin properties) on my Screen with 8 Colors for highlighting and a button for turn of and on the Highlight mode. within Highlight mode you will not be able to flip the page by gesture. You should just be able to do this by using the arrows right or left. Also add a button for creating a comment.
Iam really waiting for this and also willing to pay for it.

LOL Welcome to iTunes.
No matter how many times I change details/album covers, there's always one or two that are wrong or don't sync.
You could download a program to edit the metadata so that iTunes reads the info directly from the file instead of editing it in iTunes yourself.

Easier way to rename music files and locate them with iTunes? Help, please!

A while back, I used a 3rd party software (Yamipod) to move all my music off of my video ipod to a new computer. Yamipod converted all of my music file names to read "album name - artist - song name", instead of how iTunes imports music "01 song name". Yamipod also created a sub-folder "1" for each album the artist has in my iTunes music folder.
For example, when in my iTunes music folder, if I click on Justin Timberlake, it will show the two albums I have "FutureSex" and "Justified". If I click on "Justified" it shows a folder "1" which I have to click on to get to the song which is then named "Justified - Justin Timberlake - Rock Your Body" instead of "06 Rock Your Body"
When in my iTunes folder, a lot of my music cannot be found (even though it is not technically lost), so I manually have to click through all my iTunes music folders to "re-attach" the file so iTunes can then play the music.
Here's what I am looking for:
1. I want to rename all of my music files back to iTunes format of "track # song name" (i.e. 06 Rock Your Body) without manually retyping every song title.
2. An easier way for iTunes to "find" all of my music instead of me manually pointing to each and every file. I have all the music, I just have to manually show iTunes where each of the 1600+ songs is located, which is a long and tedious process that I do not have the time or patience for.
I would greatly appreciate any advice on how to manage this without going bonkers.
Thank you!!

Well, the one problem you have is that for the "Move" function, the source file input should be wired to the output of the "Build Path" function, not to the duplicate path out of the "List" function. Also, you need to pass the error cluster around with a shift register. Otherwise you will not catch an error that may have occurred during one of the file rename operations.

Please make recommendation for ~300mm lens ... And a general lens for a 70D

I have a new 24-70mm f2.8 and want something to compliment it for the longer distances. I'm thinking something between 250-400 would be good but not sure which one(s) are 'better'. This would mostly be used for indoor/stage shooting with some outdoor of kids plays, concerts or playing etc. maybe something in the 55-300 range?
I also have a new 70D (just took it out of the box) . So also looking for a recommendation on a USM to use with it for video - something mid range that would be good for most situations.
All input welcome!
Body: Canon 6D, Canon T1i, Canon Elan II,
Glass: Canon 24-70mm f/2.8L II USM, Canon 18-55 kit lens, Sigma 70-300mm f4-5.6, Canon 50mm f/1.8,
Flash: Canon Speedlite 430ex ii

Maria this is a problem!....."... can't afford another expensive one after the 24-70 f/2.8L !!"
There is not going to be a huge assortment of lenses that come in the quality and sharpness of this lens. You got the best first, kido. Now, if you are going to put something with it just as good, it is going to cost large. And likely be heavy but the
24-70mm f2.8 is no featherweight! I rarely recommend a lens not in the Canon stable but, lately, I have come to see there are a few off-brand lenses that do come close to Canon performance at a much lower price.
My top choice right now, for you, is the Sigma 70-200mm f2.8 EX DG OS HSM. It is around the same weight as your 24-70mm and is much less expensive. The best part is, it is very sharp.
I own this lens and can testify to it's superb performance. It is a best buy.
EOS 1Ds Mk III, EOS 1D Mk IV EF 50mm f1.2 L, EF 24-70mm f2.8 L,
EF 70-200mm f2.8 L IS II, Sigma 120-300mm f2.8 EX APO
Photoshop CS6, ACR 8.7, Lightroom 5.7

How to store images in database and retrieve them back to page?

Well I don't know how to store an image file to a database (say MSSQL) from the JSP and retrieve it back whenever needed and put it on the JSP page? Please help me.

I am not sure how to store images in database but what you can do is store the image into particular folder using FileOutputStream and its unique name into the database...and than retrieve it from the folder using that name retrieved from database...
<%
response.setContentType("text/html");
response.setHeader("Cache-control","no-cache");
String err = "";
String lastFileName = "";
String contentType = request.getContentType();
String boundary = "";
final int BOUNDARY_WORD_SIZE = "boundary=".length();
System.out.println("contentType --> "+contentType);
System.out.println("BOUNDARY_WORD_SIZE --> "+BOUNDARY_WORD_SIZE);
if(contentType == null || !contentType.startsWith("multipart/form-data"))
err = "Ilegal ENCTYPE : must be multipart/form-data\n";
err += "ENCTYPE set = " + contentType;
else
boundary = contentType.substring(contentType.indexOf("boundary=") + BOUNDARY_WORD_SIZE);
System.out.println("boundary --> "+boundary);
boundary = "--" + boundary;
try
ServletInputStream sis = request.getInputStream();
byte[] b = new byte[1024];
int x=0;
int state=0;
String name=null,fileName=null,contentType2=null;
java.io.FileOutputStream buffer = null;
while((x=sis.readLine(b,0,1024))>-1)
     System.out.println("************ x ********** "+x);
     String s = new String(b,0,x);
               System.out.println("************ s ********** \n"+s);
     if(s.startsWith(boundary))
     state = 0;
     System.out.println("name="+name);
     System.out.println("filename="+fileName);
     name = null;
     contentType2 = null;
     fileName = null;
     else if(s.startsWith("Content-Disposition") && state==0)
          System.out.println("-- 1 --");
          state = 1;
          System.out.println("s.indexOf(filename=) --> "+s.indexOf("filename="));
          if(s.indexOf("filename=") == -1)
               name = s.substring(s.indexOf("name=") + "name=".length(),s.length()-2);
               System.out.println("after name substring 1 "+name);
          else
               name = s.substring(s.indexOf("name=") + "name=".length(),s.lastIndexOf(";"));
               System.out.println("after name substring 2 "+name);
               fileName = s.substring(s.indexOf("filename=") + "filename=".length(),s.length()-2);
               System.out.println("fileName --> "+fileName);
               //String fileName1 = s.substring(s.indexOf("filename=") + "filename=".length(),s.length());
               //System.out.println("fileName1 -->"+fileName1);
               if(fileName.equals("\"\""))
               fileName = null;
               else
                    String userAgent = request.getHeader("User-Agent");
                    System.out.println("userAgent --> "+userAgent);
                    String userSeparator="/"; // default
                    if (userAgent.indexOf("Windows")!=-1)
                    System.out.println("test --> "+"\\");
                    userSeparator="\\";
                    if (userAgent.indexOf("Linux")!=-1)
                    userSeparator="/";
                    System.out.println("userSeparator "+userSeparator);
                    System.out.println("fileName before inserting userSeparators "+fileName);
                    fileName = fileName.substring(fileName.lastIndexOf(userSeparator)+1,fileName.length()-1);
                    System.out.println("fileName after userSeparators "+fileName);
                    if(fileName.startsWith( "\""))
                    fileName = fileName.substring( 1);
          name = name.substring(1,name.length()-1);
          System.out.println("name 2 --> "+name);
          System.out.println("final file name "+fileName);
          if (name.equals("file"))
               if (buffer!=null)
               buffer.close();
               lastFileName = fileName;
               buffer = new java.io.FileOutputStream("/Documents and Settings/sunil/Desktop/images/"+fileName);
     else if(s.startsWith("Content-Type") && state==1)
                         System.out.println("-- 2 --");
          state = 2;
          contentType2 = s.substring(s.indexOf(":")+2,s.length()-2);
          System.out.println("contentType2 --> "+contentType2);
     else if(s.equals("\r\n") && state != 3)
               System.out.println("-- 3 --");
          state = 3;
     else
          System.out.println("-- 4 --");
          if (name.equals("file"))
          System.out.println("Final x :: "+x);
          buffer.write(b,0,x);
}     // while closing
sis.close();
buffer.close();
}catch(java.io.IOException e)
err = e.toString();
boolean ok = err.equals("");
if(!ok)
out.println(err);
else
%>
          <SCRIPT language="javascript">
          history.back(1);
          alert('Uploaded <%=lastFileName%>');
          window.location.reload(false);
          </SCRIPT>
<%
     out.println("done");
%>
</BODY>
</HTML>
I think it will solve ur problem..

Please make it easier to position images in height and have them adapt to browser width!

Similar Messages

Maybe you are looking for