Please make this soon

Hello,
Do Ny1 have an idea that how to send a report to a user who is not in local SMTP
for eg.users os yahoo or gmail..
Please if any1 have an idea please send it as early as possible...

Ya But in discussion forums i got to know that it needs to set some SA_SYstem_Table.
when this requires.
and also they hv mensioned that change On Recipients tab -> Select the check box Determine recipients from Condition Request and select the column Logon from the Dropdown.
this tab is not activated normally.from where i can set email id??

Similar Messages

Please make this a good experiance for my first post on any board. READ ME

Hi all. Well first off, let me start by saying that my whole life I've owned PC's. And I'm not hacker Elliet. But I've gotten to know them pretty well. All the way from Windows 3.1 that came out a long time ago (more than 10 years ago)
So after a while of hearing about MAC's I decided to start small and get an iPod (since they are so popular here in NYC) and see what apple was about. Well I really saw that Apple had a great product and started asking about their computers. And did plenty of research. And before the new Intel Macs came out, I was going to get a powerbook. But I had a feeling a new laptop was coming out and waited a lil while and sure enough. The Macbook Pro came out. So I went out and did all my research (as to this being the first real purchase of a Apple product and knew about the possible implications of a new first gen Intel chip in a apple product litterally making history) I knew I might become a new beta tester.
So I started looking on these boards and did 2 weeks worth of hard research to see if the Mac Book Pro (MBP) was for me. And after all the problems i saw (ex: The whine, Right speaker distortion, heat coming from it, white line at bottom of screen, etc) I never saw or read anything about AOL connectivity problems. And I know, I know... alot of you are probably going to gripe and complain about AOL sucking and yada yada yada, but please. Cut me some slack. I actually like AOL. I got on it back in 92 when it came out, and really enjoyed it. And have been on it since. I like chatting on there, and so forth. And I hope you help with my problem instead of telling me to go get "a real ISP" I do have a real ISP, but I like my AOL too.
So now to my problem....
I have a Sony Viao 1.8ghz PC with 512 ram, 80 gig hard drive, 10/100 ethernet port. Connected to a Belkin Router (more info below on specs of router) connected to Opt Online Broadband Cable internet with VoIP. I use my macbook pro on the wireless network at my home.
I got a mac book pro 1.83 ghz running 512 ram on Tiger OSX 10.4.6 I thought that I would wait till a connectivity patch (which I thought would have been 10.4.6) fix the airport problems came out till I posted something. But now that I've tried everything, I'm hoping you open this thread and help me and possibly someone else out there as well. I just d/l'd and installed the 10.4.6 update last night and it did'nt help. So here's more info on my specs. I have a belkin router wireless G 2.4 ghz 54mbs router and I have configured the router with it's firewall, wap2 encryption (as it's the only selection the router has that is available that matches what airport comes with in encryption) I hid my network, and have tried to upgrade the firmware on the router.
Now Here's the real problem. I can connect to AOL on my MBP when I connect the actual ethernet cable to the MBP's Ethernet port (after I have let the cable modem do a hard reset to configure itself to a mac) I can connect to AOL. But when I disconnect the cable and return it to it's normal config, I can't connect to AOL. I can connect to the internet via safari, and firefox, and even AOL's IM on iChat. I can use Itunes all kinds of things. I can even play warcraft 3 wirelessly on battlenet. But connecting to AOL is a pain in the @$$. It's the only proggy I have that won't allow it to connect. I keep getting the error message "Your AOL connection ended because the AOL host was unable to start a new session. Please try to sign on again." Of course All i see for a while is the spinning black and white circle. And it goes through step 1 and 2, goes straight to 6. Then it goes blank, and BAM! That message pops up. And what's so frustrating is that I've tried every possible configuration on AOL, my router and even system preferences, for it to let connect. I even went into system preferences on the mac and went down the the Internet & Network "Sharing" icon and tried 100 possible combinations on that in the services tab, and firewall tab. I've turned them on, off, tried to make exceptions ETC. And no matter how much I play with the personal file sharing and windows sharing advanced settings and sigh every possible combination to make AOL connect via wirelessly. And nothing. I then even tried to fix the connection under AOL in setup. I've gone through and selected TCP Script, Airport Script. Cable Script, And practically every script I can think of. And nothing. I even went on to AOL and downloaded thier alleged fix to wireless accessing AOL. And nothing. I've been searching all over google, AOL's website, and all over these discussion boards and no mention of anyone even having the same problem. But please, someone out there with their infinit knowledge of how Macs run and having more experience than me, Please make this a good experiance for my first post on any board anywhere reguarding a mac. A MBP at that too.
An update to this, But amazingly enough, I actually got it to connect to AOL wirelessly for the first time yest. But I have no Idea how i did it. I tried for 3 hours to reproduce it and no luck. I was accessing my router at it's website config screen and somehow I clicked on connect to AOL and while it was trying to connect to it, i reset the router and BAM, it connected to AOL. And I was in shock. I thought I solved it. Somewhere while it was reseting the router it connected and stayed connected to AOL till I signed off and tried to sign back on to see if I could now connect, and guess what. The same dumb message keeps popping up "Your AOL connection ended because the AOL host was unable to start a new session. Please try to sign on again." And all I did was sign off to test it, thinking I had fixed the problem. I tried for 3 hours like I stated above, and BAM got it connected to AOL wirelessly again (somehow while the router was resetting). And thinking I fixed it, or figured out the trick to getting it to work, signed off... I kissed aol goodbye again. And have been unable to reproduce the "glitch". SIGH Can someone out there please help me?
I think I've made this message as detailed as possible, but please, can someone give me some constructive criticism on how to fix my AOL wireless connectivity problems. Do you know if it's my router? My MBP? AOL software? BTW, I got AOL software version 10.3.7 (Rev 4136.310 US) The latest version I D/L'ed from the AOL website. Anyone know If I should turn on or off some things such as personal fire sharing on, or firewall off or on? ANYTHING. Please. I've put alot of time into writing this post and making it as detailed as possible. And been having this problem for the past 3 weeks that I've had my MBP, and have waited long enough to use my AOL. If you need any further information or suggestions on making AOL work, please let me know. Thank you for taking the time to read all of this, and I really appreciate all of you in the time you take in responding back in trying to help me. I'll be monitoring this post almost hourly. So I hope someone out there can help. Thanks so much again. And help me make this transition to Mac a pleasant one knowing that there is a mac community out there willing to help a new mac client. Again, Many thanks
In Heath and Wealth,
Bruce
Mac Book Pro 1.83 GHZ 512 Ram Mac OS X (10.4.5)

I FIXED IT!
FYI for the rest of you that might be having the same problem. DON'T USE A BELKIN ROUTER WITH AOL ON A MBP!!!!! It ***** wirelessly. or even hard connected, it won't connect. I went to best buy today, and got a refund on the belkin. I then went to J&R and got a D-Link router. And now it works perfect. I can now chat on AOL yet again, and I tried all the other web browsers I have and messengers, and warcraft 3 online via battlenet. And it works great. I want to give you guys a special thanks for taking time out to answer back to my post. FYI! Belkin wireless G routers do not connect you to AOL wirelessly on MBP's. No matter how much you mess around on them. I highly recommend a D-Link Router. They are easy to set up as long as you READ ( AND I MEAN IT!!!) read the instructions before you set anything up on it. Use the CD that it comes with, and you'll be good to go. Set it up and it works great Almost no dead zones in the house, and now I can use the MBP with all it's cababilities. Thanks people. I really appreciate it.
P.S. I called belkin last night when i decided to get a refund on my router for today and when i talked to the tech, after puersuading him to tell me the truth. And stop BS'ing me, he broke down and admited that AOL does not work wirelessly on MBP's. So to make a long story short this time, There you go. And one last note, I'm very happy now with my d-link router. I honestly thought it would suck. Not being a brand name router or anything. But amazingly, it works like a brand name item! Again, many thanks all.
Bruce

Lightroom 5.6 do not support Canon g1x mark ii !!!!!!!!!! PLEASE DO THIS SOON. Thanks a lot.

Lightroom 5.6 do not support Canon g1x mark ii !!!!!!!!!! PLEASE DO THIS SOON. Thanks a lot.

negue wrote:
Lightroom 5.6 do not support Canon g1x mark ii
What ssprengel said.
See Camera Raw plug-in | Supported cameras
Camera
Raw image filename extension
Minimum Camera Raw plug-in version required
Minimum Lightroom version required
Powershot G1 X Mark II
CR2
8.5
5.5

Apple please make this..... i am begging you...

Can you find a way to make some sort of portable smaller "ghettoblaster" or "boom box" like unit, that has an integrated air port in it, as well as an am/fm, and typical features, as well as kicking good sound. It would be perfect for taking out on the deck or balcony and using the existing airport network and play the music that is already playing in the house via iTunes. With the remote function on the iPhone it would be seamless. I already have about four air port express units in my place and do want the ability to go outside with out having to plug in both the radio/ipod speakers as well as the air port. It seems that it is one of those things that i thought was made already but the lady in the Apple store looked at me like a confused puppy. Apple please make this so i can add it to the already long slit of products I want.

-> http://www.apple.com/feedback/

Please make this stop?

ok i have 10.5.6 on a mac pro i am not new to GB and have done quite a lot of work with it.
http://losackmd.posterous.com/
so dont start criticizing my criticizing.
with a clean GB interfase, i import an mp3. about 130 bars on track one
it is the instrumental over which i will sing.
at bar 13 i start to sing the first verse. As soon as it has recorded i notice on top of the interfase a blue bar appears in middle top as if its saving what i just recorded. i go and edit/cut out bad singing
by dragging on the bad part in the editing area below once i double click on the purple recorded vocal.
every time i do this i get this an on going saving blue bar that has cancel on it and also says flex timing appears. I DONT WANT THIS ACTION OCCURRING! because it sometimes screws up the timing of the vocal. Why does it have to appear every take i do in recording vocals and how can i stop it?
i want the old GB that left me alone.
Does anyone know what im talking about? I cant use GB anymore if this continues.
This incessant flex timing has to have a shut off valve somewhere doesnt it?
please tell me it does. i will elaborate if you dont know what im saying.
record vocal on track 2 as i listen to the mp3 on track 1, as soon as i stop recording the vocals this box comes on as if its saving the song ON AUTOMATIC. please tell me how to work as if i have GB09
this is serious.
thanks
gl

Chris
it happens no matter what i do.
i appreciate your response.
it appears as if the audio area is so sensitive that if i cut an audio loop the whole process starts. I like to eliminate the empty parts of my vocals on the audio loops when i cmd x the part i select this window appears and it starts its ruminations. It at times messes up the timing of the piece.
THis does not always happen but it does often enough
or if i stop recording an audio part the window that says quantizing for flex time starts without my doing anything
i notice all the tracks have stars i am not clicking on any of them. I have never seen GB act this way.
i am not a complainer. maybe i need to reinstall it. I am using 10.6.5. And there are now crashes
when i save or convert to mp3s this never happened before. I can only surmise that GB 11 is not ready for public use. I am saddened by its behavior i will send this to APPLE.
glenn losack

Please make this application swap stop it is annoying

if i have iphoto open pshop open and some other window open there appears to be
some sort of hiding of the other windows ( they slip off the desktop below )/apps while i work in one. I cant seem to get the application ( window ) i am working on. It seems to disappear. I WANT all the windows on the desktop there not hiding .
please tell me how to stop this its insane.
i use windowshade to close the window and so i have all three or 4 windows available. I dont like this slipping out of the way LEOPARD is doing. Please help!!!!!!

I know there was a problem with 10.5.2 and CS3 doing something "unexpected" and not behaving in a standard manner, which I think has been addressed in the latest updates to OS X and CS3.
Specifically, InDesign documents disappear when opening them..
http://www.versiontracker.com/dyn/moreinfo/macosx/122
http://www.adobeforums.com/webx/.ee6b330/
http://www.adobe.com/support/downloads/detail.jsp?ftpID=3961
http://www.apple.com/downloads/macosx/apple/macosx_updates/macosx1054comboupdate .html

Forum Mods, Please make this a sticky: BlackBerry PlayBook battery power charge, discharge characteristics, and guidance on extending battery life

BlackBerry PlayBook battery power charge, discharge characteristics, and guidance on extending battery life
KB27705
Overview
The BlackBerry PlayBook may come to a power state where it is unable to power on; a Yellow LED may flash in a sequence of 5 flashes, the BlackBerry PlayBook may boot up to the BlackBerry PlayBook Logo and then power off, may not power on at all.
Discharge behavior under normal use:
Under normal active use, a battery drained to 10% will cause the device to prompt the BlackBerry PlayBook user (notification and audible beep)
Without connecting a charger the device will automatically shut down at 3.53V (0%)
Pressing the power button may allow successful boot, but it will turn off again very quickly
Discharge behavior under no use:
A device left unused but in ‘Stand By’ will warn the BlackBerry PlayBook user at 10% (notification and audible beep)
The warning may not be noticed and the device will go back to ‘Stand By’
Letting the device drain in standby mode drains the battery slower, but more completely
Device will still shut off at 3.53V (0%), but it less likely to successfully boot afterwards
Discharge behavior under 3.53V (0%):
If the device is left to shutoff, the battery will continue to drain below 3.53V due to quiescent current draw from the motherboard and the battery fuel gauge
With the battery between 2.7V-3.53V, pressing the power button causes the LED to flash a pattern (1 solid red light followed by 5 yellow blinks) to indicate low battery (PlayBook Tablet OS version 1.0.5, and above)
Below 2.7V there is no activity, or LED pattern displayed
Charge Behaviour:
The provided charger should be used to charge the device. The optional 12 volt rapid charger is may reduce charging times
to approximately 3 to 4 hrs. Standard Blackberry smartphone chargers, other AC adapter USB chargers, or computer USB ports
are not recommended for the sole purpose of charging the PlayBook as with these methods it may take more that 12 hours to
charge the BlackBerry Playbook.
If the battery voltage is below 3.53V(0%) then the charging behaviour is dependent on the software version. The charging code will limit the charging current to under 400 milliamps, during which time, it may take an hour to reach 3.53 Volts. Once the battery voltage rises past 3.53 volts, then "high-rate" charging will start. If, after charging the Tablet for 4 to 6 hours still does not result in LED activity, attempt to force power on the BlackBerry Playbook by pressing and holding only the Power Button for only 20 seconds.
Prior to BlackBerry Tablet OS 1.0.5:
A BlackBerry PlayBook will never charge while powered off in BlackBerry Tablet OS versions prior to 1.0.5.
The device will show a red light when the charger is connected and then nothing more
Repeated connection of the charger can recover the device in some instances.
Once the battery voltage rises above 3.53V the system will boot and the UI will show charging
Starting in BlackBerry Tablet OS 1.0.5:
The device will show a solid red LED, followed by a solid yellow LED as the device boots into charging mode. This is followed by a yellow pulsating LED indicating charging in progress.
The time span between the red and yellow lights can be as long as 45 seconds as the device boots into charging mode.
Once the yellow LED illuminates, the device can be started, but it is advisable to let it charge for at least 3.5 hours to achieve a sufficient charge.
The device will show a solid green LED once the device is fully charged.
Starting in BlackBerry Tablet OS 2.0.1:
Once the yellow LED begins pulsating indicating charging mode, if the BlackBerry PlayBook is disconnected from the charger, the following graphic will be displayed on the screen, indicating charging is not complete, and to reconnect the power source. The graphic will be displayed for 20 seconds before the BlackBerry® PlayBook powers off if the power source is not reconnected. The same graphic will also be displayed if the BlackBerry PlayBook is turned on and there is not sufficient power to perform the boot process.
If the BlackBerry PlayBook is plugged into a power source, and the power button is pressed to power on the device, the following graphic will be displayed if there is not sufficient power to perform the boot process. If this occurs, the BlackBerry PlayBook should be left plugged in to gain enough charge to boot.
Additional Information
Turning off the BlackBerry PlayBook and using standby mode.
Checking the battery power levelOn the status bar, tap the battery icon. When the battery power level is low, the BlackBerry PlayBook tablet will display a notification.
Enter standby modePress the Power button on the top of the BlackBerry PlayBook..
Exit standby modeSwipe down from the top frame to the bottom frame
Turn off the BlackBerry PlayBookPress and hold the Power button. Tap Shut Down.
To extend the BlackBerry PlayBook battery life, charge it regularly, close unused applications and keep the BlackBerry Playbook out of the sun and other hot places. The following may also be used to extend battery life:
Dim the screenOn the status bar, tap the Options icon (a gear), select the Screen tab and change the Brightness setting
Turn off the screen automaticallyOn the status bar, tap the Options icon, select the Screen tab and change the Backlight Time-out field
Enter standby mode automaticallyOn the status bar, tap the Options icon, select the Screen tab and change the Standby Time-out field
Turn off Wi-Fi when not in useOn the status bar, tap the Wireless icon and set the Wi-Fi switch to Off
Turn off Bluetooth connectivity when not in use
On the status bar, tap the Bluetooth icon and set the Bluetooth switch to Off
Pause apps when you show the home screen or switch between apps On the status bar, tap the Options icon, select the General tab and set the Application Behavior switch to Paused
With the upgrade to PlayBook OS 2.1.0.1032 the following message may be displayed when connecting the Playbook to a PC using the micro-USB cable:
Unable to charge battery with connected source
This message is displayed because the voltage provided is insufficient for charging. The USB voltage is limited to 384mA even if the maximum tolerance is 500mA. The voltage is limited to 384mA by design to avoid violating the USB specification which states USB devices cannot draw more than 500mA from the USB port.

TroyTempest wrote:
I guess it's not what you know but whom you know.
Yup! Glad you're here though. I appreciate your contributions in the forums myself.

Please make this go away now

http://www.adobeforums.com/webx/.3bc4149b
Thank you.

>> "For each submission, please send the following to [email protected] by July 6, 2007:"
I would say it's a bit out-of-date.

Adobe, could you please make this forum even slower...

... so that I really have enough time to complete the post-processing of at least one image between two subsequent post loadings?.
Thanks in advance.

--OB

PLEASE make PS CS6 open RED R3D movie files through Camera Raw 7 as 16 bit/channel files

Hi All,
Why does CS6 Photoshop only open Red R3D movies files as 8 bits per channel ???
This is VERY disappointing , R3D movies should be opened through Camera Raw 7 as 16 bits per channel
Hey Adobe please, Please, PLEASE make this very desirable change
Many thanks
Steve

Hi Chris,
Thanks for the prompt reply. I understand what you are suggesting however in CS6 PS when I open a Red R3D file (on my windows machine)
photoshop opens the file as 8 bit/ch WITHOUT going through ACR, not offering the option of opening it as a 16 bit file in ACR.
I presume PS "thinks" the R3D file is just 8 bit and doesn't "know" to start up Camera Raw 7 to allow opening it as a 16 bit file
No easy fix I'm guessin' ?
Many thanks
All the best
Steve

Dear APPLE please make app that record screen. Thanks Good Bye

Please make this app I want make a Let't play

This is a user-to-user technical support forum. You're not addressing Apple here.
Submit your feedback directly to Apple using the appropriate link on the Feedback page:
http://www.apple.com/feedback

Please make a user configurable auto rewind button

I love listening to audiobooks. I have long searched for a device that would do this best. The most frustrating thing when listening to a book is to miss a few words and want to go back 5 or so seconds, only to accidentally rewind to the beginning of the book. It makes me want to pull my hair out when I have to then go skim through potentially hours worth of audio to find my place again.
The Ipods do have an auto-rewind button, but it goes back a full 30 seconds. That's way too much! Why not make a button that goes back 5 seconds or so. Or better yet, make it configurable by the user to suit his or her own tastes. Anyone who has ever used a digital DVR can attest to how valuable this one little enhancement would be. There are a HUGE number of audiobook listener's out there and I honestly think that if a company beats Apple to the punch on this, those users will jump ship to take advantage of a player with that capability if they were aware of that player. I know I would.
When the Ipod had the wheel, it wasn't perfect (in fact far from it) but at least it offered some degree of control in rewinding a small amount. Now, it's 30 seconds, or the whole book.
Please make this enhancement. I know it might seem small, but it is HUGE (I like that word).
It's so frustrating, because I have taken the time to write in on this a couple of times in the past and I am either being completely ignored, or Apple just doesn't see the value in such an easy upgrade/tweek. It's hard for me to believe the latter, so it makes me feel that Apple just doesn't care.
I love my iPod, but I would LOVE it (HUGE) if it had this fix.
Thanks for your time,
Jon

This is a user to user message board. Apple does not come here. Post your comments over on the Product Feedback website.

Please make a swap partition optional at installation

Because i have enough RAM i would like to skip the creation of a swap partition at the setup.
Could you please make this available at the next (0.7) release?
lubot

As far as I remember Con Kolivas was testing some VM managers lately in his ck kernels.
These include hard swapiness (in <2.6.8.1-ck4) and mapped watermark (in 2.6.8.1-ck4).
http://members.optusnet.com.au/ckolivas/kernel/
Sun Aug 22 20:19:47 EST 2004
Mapped watermark??
This readjusts the way memory is evicted by lightly removing cached ram once the ram is more than 2/3 full, if less than the "mapped watermark" percent of ram is mapped ram (ie applications). The normal system is to aggresively start scanning ram once it is completely full. The benefits of this are:
1. Allocating memory while ram is being lightly scanned is faster and cheaper than when it is being heavily scanned.
2. There is usually some free ram which tends to speed up application startup times.
3. Swapping is an unusual event instead of a common one if you have enough ram for your workload.
4. It is rare for your applications to be swapped out by file cache pressure.
Disadvantage: Less file cache.
The mapped watermark is configurable so a server for example might be happy to have a lower mapped percentage. The default is 66 and a server might like 33
echo 33 > /proc/sys/vm/mapped
This removes the swappiness knob entirely and deprecates all my previous vm hacks (autoregulated swappiness, hard swappiness, kiflush).
You must be aware that the normal system usually shrinks the memory allocated for buffers & file cache until it becomes close to ZERO, making almost all the memory available for user applications.

Please make the Thunderbird compatible with Mac OS X Yosemite soon.

The Thunderbird is my favorite and only e-mail software on my Mac.
(The Mail made by Apple is used by my wife only.)
I am waiting for compatibility with Yosemite !
Please make it so soon !
PLEASE, again !

***SOLVED***
In case you don't want to install JRE6 at all and simply use JRE8 without symlinking it to the JRE6 either you can do the following:
Copy the Info.plist located at the path named below to e.g. ~/Desktop/:
     /Library/Java/JavaVirtualMachines/jdk.1.8.<…>/Contents/
and then replace
     <key>JVMCapabilities</key>
     <array>
     <string>CommandLine</string>
     </array>
with the following:
     <key>JVMCapabilities</key>
     <array>
     <string>JNI</string>
     <string>BundledApp</string>
     <string>WebStart</string>
     <string>Applets</string>
     <string>CommandLine</string>
     </array>
Afterwards copy the file back to its original location (you need administrator rights). For this change to take effect you need to restart your computer. The dialog for Java 6 should shouldn't appear anymore and Photoshop should launch just fine using JRE8.
On a related note it appears that this plist change sticks even after updates done through the Java Preference Panel in the System Preferences.

Please tell me which Ipod dock adapter is compatible with the Ipod Classic 80GB? They no longer make this particular Ipod and I need the right dock adapter for my Panasonic SC-HC25 stereo system I recently purchased.

Please tell me which Ipod dock adapter is compatible with the Ipod Classic 80GB? They no longer make this particular Ipod and I need the right dock adapter for my Panasonic SC-HC25 stereo system with universal dock for Ipod/Iphone I recently purchased.
You can also send my answer to [email protected]
Thanks in advance for all who will help.
slovebk

refer to this Apple support Article, on Universal Dock which retail at $59 at Apple store.
http://support.apple.com/kb/HT1380
Look through the compatible list chart and see which 80GB model are you using, either ID 9 or 10. you can order through Apple Online Store.
Have a nice day!

Please make this soon

Similar Messages

Maybe you are looking for