PLEASE NEED HELP WITH OUTPUTTING HDV/DV!! 16:9 to 4:3!! NEED HELP NOW!

ok. I started out with HDV footage. Imported that edited it native HD into final cut 5, didn't downconvert. Now I am trying to output the finished work onto a dv camera through firewire. At first i nested the HDV sequence into a NTSC sequence, but the video wouldn't go through to the camera, only audio. I thought it was a connection problem, but then i played some DV footage and it went to the camera fine. So then i exported the DV sequence as a quicktime movie in NTSC form, but that really cropped the 16:9 footage and made it unwatchable. How can i take the 16:9 HDV footage, and letterbox it so that it fits inside a 4:3 frame without cutting off any of the original frame, and then export that to a DV camera? Let me know if you need more info, please help this is due tomorrow!! ahhhhh!

When you Export using QuickTime Conversion, to DV Stream, you get an option of what the aspect ratio should be. Select 16:9 and the DV stream will be what you're looking for. Opening that in FCP and sending it to the camera should work out well.

Similar Messages

I need help with my i tunes gift card(exchangable) that is damaged.Help please!!

I need help with my i tunes gift card(exchangable) that is damaged.Help please!!

iTunes Store: Invalid, inactive, or illegible codes

Subquery results need help with output

Requirements:
There is request to dump every days data from one table into text file.
Tables:INSPECTION_RESULTS
NJAS
Primary Key: RES_SYS_NO
Parent table: INSPECTION_RESULTS
Child table: NJAS
Purpose:
1. obtain output results for the MIN and MAX RES_SYS_NO from INSPECTION_RESULTS table for yesterdays date.
2. Create comma delimited file for following columns using above table data output.
Script thus far:
SELECT NJA_RES_SYS_NO||','||NJA_TEST_REC_NO||','||NJA_LIC_ST_ID||','||NJA_ETS_ID||','||NJA_SW_VER||','||NJA_TECH_ID||','||NJA_VIN||','||NJA_LIC_NO||','
||NJA_LIC_JUR||','||NJA_LIC_SRC||','||NJA_MODEL_YR||','||NJA_MAKE||','||NJA_MODEL||','||NJA_VHCL_TYPE||','||NJA_BODY_STYLE||','||NJA_CERT_CLASS||','||
NJA_GVWR||','||NJA_ASM_ETW||','||NJA_ETW_SRC||','||NJA_NO_OF_CYL||','||NJA_ENG_SIZE||','||NJA_TRANS_TYPE||','||NJA_DUAL_EXH||','||NJA_FUEL_CD||','
|| NJA_VID_SYS_NO||','|| NJA_VRT_REC_NO||','|| NJA_ARMSTDS_REC_NO||','|| NJA_RSN_F_N_TESTABLE||','|| NJA_DYNO_TESTABLE||','||
NJA_CURR_ODO_RDNG||','|| NJA_PREV_ODO_RDNG||','|| NJA_PREV_TEST_DT||','|| NJA_TEST_TYPE||','||
NJA_TEST_START_DT||','|| NJA_TEST_END_TIME||','|| NJA_EMISS_TEST_TYPE||','|| NJA_TEST_SEQ_NO||','
||NJA_LOW_MILE_EXEMP||','||NJA_TIRE_DRY||','|| NJA_REL_HUMID||','|| NJA_AMB_TEMP||','||NJA_BAR_PRESS||','|| NJA_HCF||','||
NJA_GAS_CAP_ADAP_AVL||','|| NJA_GAS_CAP_REPL||','|| NJA_OVERALL_GAS_CAP_RES
FROM NJAS
WHERE NJA_RES_SYS_NO IN (SELECT MIN(NJA_RES_SYS_NO) FROM INSPECTION_RESULTS WHERE NJA_RES_SYS_NO IN
(SELECT MAX(NJA_RES_SYS_NO) FROM INSPECTION_RESULTS, (SELECT SYSDATE-1 FROM DUAL))
It works but not sure if I am getting accurate results. Can anyone help me fine tune this subquery script? Thanks!
Scott

Duplicate post
See my answer in your other posting here Re: need help with script

Help with output a.s.a.p .please!!!

I'm having trouble with outputting everything on the same line in this problem:
Given an int variable k that has already been declared, use a for loop to print a single line consisting of 97 asterisks. Use no variables other than k
I've gotten this far:
for(k=0;k<=97;k++)
I'm not sure how to output all the asterisks on the same line. Help would be much appreciated.

Are you going to use System.out, and some method of it which prints a character somewhere in there, or not?

I've just came on board from Andriod and need massive help with the Contacts application any one out there willing to help the 'noob'?

I had the folks at the store port over all of my contacts from my old
ratty Andriod phone to my new shiny iPhone.
however all 200+ of my contacts sort of "shook" out,
meaning say John Smith, on my old phone,
had in my contacts the following:
John Smith
123 Main St. Anytown, Anystate USA
555-826-4879 home
555-799-4247 cell
[email protected]
johnsmith@facebook
all nice and neat on my andriod but when it ported over
all that information was just scattered all over my contacts sort of like:
john smith, smith john
john smith 123 main st. etc.
johhn smith home 555 etc.
john smith cell 555 etc.
john smith johnsmith@ etc.
etc.
so for all those 200+ contacts in my phone, I've got a zillion of them now...
so I'd like to get this all back in order before I and Siri explode.
I know nothing, and I know even less about outlook and the sort.
But I do know I am in Dire need of help with this... I figured that eveything else
involving iphones and apple in general was supposed to be cake but it seems
like this is the only thing that isn't cake at all... unless, I'm just a right idiot. (which is possible, hence spelling and grammatical issues).

I believe I've tried to sync it with google, but it didn't seem to take
muchless take my calender. it seems to favor my facebook calender
more over my google calender, but Siri seems to be helping me re-write
it...but that's not the game here, it's the contacts. I've tried to export
the cvp (??) list and import it into my iTunes account. However, It only
doubled my issue because it didn't over write my existing contacts.

Elements 8 -help with outputting slide shows to File?

Can anyone help with saving a slide show in created in Elements to a file on my laptop? I know a WMV file is created, which option should I select to save in UK widescreen format 16:9?

Bob, thanks for prompt answer.
I am ultimately going to write the file to a DVD using Windows DVD Maker. Is the 16:9 format the DVD-PAL 720x576 option, or the High 1024x768 option?

Need help with output one field horizontally please

I know I have seen some ideas and threads about this, but it is not really what I need. I have a report in CR XI that seems to be on the right path. The problem I am having is one field that needs to be in details could provide multiple results (products and services) which duplicates all the records. Some customers I'll have 3 lines, the next 9 ... depending on how many P&S they have.
What I have done is moved all fields from the details section to group1 which so far seems fine and left my P&S field in details.
The output is normal:
prod1
prod2
prod3
prod4
etc.....
What I need is this: prod1, prod2, prod3, prod4, etc.
Any ideas greatly appreciated.
In the group header add a formula
WhilePrintingRecords;
Global StringVar ProductList;
ProductList := '';
in the details
WhilePrintingRecords;
Global StringVar ProductList;
If ProductList = '' then
ProductList :=
else
ProductList := ProductList & ', ' & ; ''
In the group footer
WhilePrintingRecords;
Global StringVar ProductList;
ProductList
Edited by: Terry Mergl on Apr 20, 2010 9:15 PM

What you have should do it. Is there an issue? Please explain in detail, giving sample data, current results, and expected results.
Carl

Need help with output please

Thank you for taking a look ill post my code and then my problem
import java.util.Scanner;
public class intrest
    public static void main( String[] args )
     Scanner input = new Scanner( System.in );
        System.out.print("Deposit:");
     double Value =input.nextInt();
     double Rate = 0;
        if (Value >250000 || Value <10000)
          System.out.print("Error: minimum deposit 10,000 and Maximum deposit 250000");
     else if (Value <25000)
          Rate = 2.76;
     else if (Value <50000)
                Rate = 3.16;
     else
          Rate = 3.20;
     double Interest = (Value / 100 * Rate);
        System.out.println ("Interest:" +Interest) ;
     System.out.println ("Rate:    " +Rate) ;
}my goal for this program is to get the interest rate if the value is between 10k and 250k, if its any other value it should bring up an error however when i do input a number out of that range it gives me the error but it also displayes the interest rate and the interest gained although it does not work it out (both stay at 0 which is good),
i want it to only show the error if the first statement is true "{code}if (Value >250000 || Value <10000){code}" ive tried using "Else If" but its still showing me the interest rate and interest gained, can anyone help would really appreciate it
thank you very much

Do a if condition check....if you dont want to use exit...below is the modified code
import java.util.Scanner;
public class test
    public static void main( String[] args )
     Scanner input = new Scanner( System.in );
        System.out.print("\n Deposit:");
     double Value =input.nextInt();
     double Rate = 0;
        if (Value >250000 || Value <10000)
          System.out.print("\nError: minimum deposit 10,000 and Maximum deposit 250000");
        else if (Value <25000)
                  Rate = 2.76;
             else if (Value <50000)
              Rate = 3.16;
     else
          Rate = 3.20;
             double Interest = (Value / 100 * Rate);
             if ((Interest != 0) || (Rate !=0))
    System.out.println ("\n\n Interest:" +Interest +"\n\n Rate :" +Rate);
}

Need help with output for D5

Hi,
I need some help getting my film in sync to a D5.
The film was shot on MiniDV and edited drop frame (29.97).
What we did first is output on miniDV and dubbed that to a D5 for color correction. Everything was in sync with the timeline. Then my friend color corrected. Since then several shots have been replaced, not effecting the timing at all. We checked that everything was hitting at the same timecodes and everything was cool.
Now I've output another tape onto MiniDV and tried to dub it to D5 but the shots are not hitting at the same timecode. They assure me that everything is drop frame on their end. Not sure what might be causing the problem. Not sure what to try next?
Need suggestions and ideas.
thanks.

if you had a downconvert from your "color corrected d5" you could place it in the timeline and see whats up.

Need help with output type EDI for ERS

All,
I want to be able to run and ERS settlement and have the invoices created sent via EDI/XML to the supplier.   I have several questions on the set up.
1) I have output type ERS6 which is defined as ERS EDI. I assume because it does not start with Z* this is SAP standard, so I shouldn't have to modify any of this.
2) I've added my supplier to this output type.
3) I assume I need to create a partner profile for this supplier? If so can someone tell me the message type to use?
Is there any set up I'm missing in this process?   I've executed ERS but do not get an idoc and I'm fairly certain it's because I haven't done the partner profile set-up.
Thanks for your help.
Sandra

Hi,
You don't have to modify thise setup unless you have any customized requirement.
You are missing partner profile setup.Carry out the setup and run MRRL tcode to create the idocs
Enter the following values using tcode WE20.
Field                                       Value
Message type                         GSVERF
Partner type                             LI (vendor)
Partner function                        LF (vendor)
Port                                         SUBSYSTEM ( Port to your middleware)
Output mode                            such as Collect IDocs
Basic type                                GSVERF01
Application                                 MR
Output type                                ERS6 or the type you have defined
Regards,
Karuna

Need help with 'Output Folder URL'

How can I compile my application and have it get posted on a
server?
When I create a project, in the “Flex Build Path”
I add my server URL in the 'Output Folder URL' field. But when I
Run my project, it doesn't even seem to attempt to push any files
to the server. It just brings up my browser with the path to it,
which it obviously gets a 404 error. And its going to need a
username and password to post files to a server. Where would I
assign theses value to Flex Builder?

After I installed Apache Ant and tinkered with it for about 5
hours, I have what initially wanted. The code below will compile,
copy and launch. I also made a splash logo that appears when its
building. Ant is a nice utility for automated development.
Ref:
http://blog.jodybrewster.net/2008/04/09/installing-ant-in-flex-builder-3/
http://ant.apache.org/manual/tasksoverview.html
<project name="buildXIFF" default="main">
<property name="compiler" value="C:\Program
Files\Adobe\Flex Builder 3\sdks\3.2.0\bin\mxmlc.exe"/>
<property name="firefox" location="C:\Program
Files\Mozilla Firefox\firefox.exe"/>
<property name="projectURL" value="
http://vmwinserver2003/flex/tests/XIFF/XIFF.html"/>
<property name="baseDirectory"
value="Z:\Documents\Programming\Flex\Tests\XIFF"/>
<property name="baseServerDirectory"
value="Y:\flex\tests\XIFF"/>
<target name="main">
<splash
imageurl="file:${baseDirectory}/build/FxAntBuildLogo.png"
showduration="2000"/>
<antcall target="compile" />
<antcall target="copy" />
<antcall target="launch" />
</target>
<target name="compile" description="Build XIFF
project">
<echo>Building files in bin directory in
repository</echo>
<exec executable="${compiler}">
<arg line="-file-specs '${baseDirectory}/src/XIFF.mxml'
"/>
<arg line="-output= '${baseDirectory}/bin-debug/' "/>
</exec>
</target>
<target name="copy" description="Copy XIFF bin directory
to server">
<echo>Copying bin directory from repository to server.
Overwriting all files in destination directory.</echo>
<copy todir="${baseServerDirectory}" overwrite="true">
<fileset dir="${baseDirectory}/bin-debug/"/>
</copy>
</target>
<target name="launch">
<echo>Launching browser, URL is the project's html
page on the server.</echo>
<exec executable="${firefox}" spawn="true">
<arg value="${projectURL}"/>
</exec>
</target>
</project>

Need help with outputing query group names

I am trying to come up with a way to output group headers, then all the records under each group header etc. It would be easy, except there is a twist with what i want to do.
Normally if I have this set of data (which I ‘borrowed’ from a site that showed the closest to what I’m looking for):
Example Table Setup:
TABLE [Numbers]
(Name, NUMBER)
Dave Bosky              843-444-4444
Dave Bosky              843-555-5555
Matthew Small        843-111-1111
Matthew Small      _843-222-2222
Matthew Small        843-333-3333
I could use the following code:
<cfoutput query="somequery" group="name">
        #name#<br>
        <cfoutput>
                #phonenumber#<br>
        </cfoutput>
        <hr>
</cfoutput>
And get this:
Dave Bosky
843-444-4444
843-555-5555
Matthew Small
843-111-1111
843-222-2222
843-333-3333
BUT, my actual tables are not set up like this. Rather than recording each name with each record, I would have an ID that is the foreign key for another table.
Current table set up would look like this:
TABLE [People]
(ID, NAME)
1 Dave Bosky
2 Matthew Small
TABLE [Phones]
(PEOPLE_ID, NUMBER)
1              843-444-4444
1              843-555-5555
2              843-111-1111
2              843-222-2222
2              843-333-3333
So this output would actually give me this with my current setup and the query code above:
1
843-444-4444
843-555-5555
2
843-111-1111
843-222-2222
843-333-3333
How do I keep my current setup but create a query that achieves the same result from the top? (Output the names from the People table as the group headers, but the data from the Phones table underneath that)

Thanks! With a little tweaking I got it done.
In case this might be useful to someone else this is the code I ended up using as a test run for what Im trying to do:
<cfquery name="testthis" datasource="IRLE">
SELECT ACCOUNTTYPES.ACCOUNTTYPEID, ACCOUNTTYPES.TYPEDESCRIPTION, ACCOUNTS.ACCOUNTNUMBER, ACCOUNTS.ACCOUNTTYPE, ACCOUNTS.ACCOUNTDESCRIPTION
FROM ACCOUNTS INNER JOIN ACCOUNTTYPES ON ACCOUNTTYPES.ACCOUNTTYPEID = ACCOUNTS.ACCOUNTTYPE
WHERE ACCOUNTUSERID = '#Session.UserID#'
</cfquery>
<table>
<th colspan="3" align="center"><u>ACCOUNTS:</u></th>
<cfoutput query="testthis" group="TYPEDESCRIPTION">
<tr><td></td>
<td colspan="2">#TYPEDESCRIPTION# Accounts:<BR></td>
</tr>
<cfoutput>
<tr>
<td></td>
<td>#ACCOUNTNUMBER#</td>
<td>#ACCOUNTDESCRIPTION#</td>
</td>
</tr>
</cfoutput>
</cfoutput>
</table>
Im using MySQL, so all the table names etc have to be capitalized.
Table setup:
ACCOUNTTYPES
ACCOUNTTYPEID
TYPEDESCRIPTION
1
CASH
2
TRADE
ACCOUNTS
ACCOUNTNUMBER
ACCOUNTUSERID
ACCOUNTTYPE
ACCOUNTDESCRIPTION
1
1
1
CASH
2
1
2
BROKERAGE
Note I also threw in a WHERE clause to only show accounts for the logged in user. (Session.USERID is defined by my code at login)
All in all the output was:
ACCOUNTS:
                CASH Accounts:
                1              CASH
                TRADE Accounts:
                2              BROKERAGE
Given my data at the moment, that’s what I wanted! Sweet!

Need help with output

im trying to get the list of books on one dialog box. but all it shows is the message and no book title.
Im trying to get the user to choose a book from the list. by entering 1-4.
but so far what i really need first is how to get the titles all in one box
        if (quantity > 0) {
            JOptionPane.showInputDialog(null, "Choose a book to purchase or 4 to quit");
            for (int i = 0; i < quantity; i++)
                    JOptionPane.showInputDialog(null, "\"" + volumes.title);
/code]
Heres the rest of the code
import javax.swing.JOptionPane;
import java.util.*;
class Book
    public String title;
//DONT FORGET TO WRITE COMMENTS!!!!!!!!!!!!!!!
public class delete
    public static void main (String [] args)
        Book[] volumes;
        char    answer;
        int     quantity = 0,
                limit = 0;
               int option;
       limit = Integer.parseInt(JOptionPane.showInputDialog(null,"How many titles in the store? (Must be no more than 20) ")); //prompts the user for book titles
        volumes = new Book[limit];
        while (quantity < limit) {
            volumes[quantity] = new Book();
          volumes[quantity].title = JOptionPane.showInputDialog(null, "\nEnter book " + (quantity+1) + "'s title : ");
                        quantity++;
        if (quantity > 0) {
            JOptionPane.showInputDialog(null, "Choose a book to purchase or 4 to quit");
            for (int i = 0; i < quantity; i++)
                    JOptionPane.showInputDialog(null, "\"" + volumes.title);

[url http://forum.java.sun.com/thread.jspa?threadID=5164155&tstart=0]Xpost

Need Help with Output Routing...

Ok, I've spent a few hours trying to figure this out and I give up....here's my question:
I've got a MOTU Traveler and I'd like to have the Logic Output 1-2 feed its signal to both MOTU Analog Output 1-2 (Main Out) and Analog Output 3-4. I want the same signal going to both places. Basically I have two different sets of speakers I use when I'm finishing up a track and like to A/B between the different speaker sets. I've tried everything in Logic and other then setting up another output in Logic labeled 3-4 and manually switching each channel and bus to that new output, nothing works. I also tried the cuemix console and didn't see anyway to do it in there. The only other thing that seemed to work was using an I/O plugin sending output 1-2 to output 3-4, but the signal was super distorted going into 3-4. Anyone know how to have a single Logic Output (1-2) go to multiple Outputs on a MOTU?

Hi,
You can set up another output (3+4) and feed it from a buss that is at unity gain,from the main output 1+2
Then in your cuemix you can calibrate that output to be the same level as the mains,so when you compare the speakers,the levels stay the same when switching.
Just make sure to check the physical outputs on your traveler are set to the correct impedance (+4 or -10) to match the main outs.
Cheers

Need help with OutPut message

My Code's below. I'm having trouble with the out put. Can anyone offer any suggestions?
import javax.swing.JOptionPane;
import java.util.Locale;
import java.text.NumberFormat;
public class Retail
public static void main(String args[])
String firstNum;
String secondNum;
String result;
int prodNum;      //first number to input
double quantity; //second number to input
double total;          //total of Prod * Quantity Sold for all items
// To use American Dollar
NumberFormat moneyFormat = NumberFormat.getCurrencyInstance( Locale.US );
// first number entered as string
firstNum = JOptionPane.showInputDialog( "Enter product number 1-5" );
// second number entered as string
secondNum = JOptionPane.showInputDialog( " Enter quantity of items sold" );
// convert values to type double or int from type string
prodNum = Integer.parseInt( firstNum );
quantity = Double.parseDouble( secondNum);
result = "";
switch (prodNum)
case 1: // 1st product
total = 2.98 * quantity;
break;
case 2: // 2nd product
total = 4.50 * quantity;
break;
case 3: // 3rd product
total = 9.98 * quantity;
break;
case 4: //4th product
total = 4.49 * quantity;
break;
case 5:
total = 6.87 * quantity;
break;
default: JOptionPane.showMessageDialog( null, "Wrong product number entered" );
JOptionPane.showMessageDialog( null, result, "Total Price of Items Purchased", JOptionPane.INFORMATION_MESSAGE );

basically what it is is it's saying it cannot resolve
a symbol, but I can't figure out which symbol?Not with the code you just posted, it doesn't. However, the error will tell you exactly what the compiler doesn't recognize. In the meantime, try this:
import javax.swing.JOptionPane;
import java.util.Locale;
import java.text.NumberFormat;
public class Retail
    public static void main(String args[])
        String firstNum;
        String secondNum;
        String result;
        int prodNum; //first number to input
        double quantity; //second number to input
        double total = 0.0; //total of Prod * Quantity Sold for all items **INITIALIZED **
        // To use American Dollar
        NumberFormat moneyFormat = NumberFormat.getCurrencyInstance( Locale.US );
        // first number entered as string
        firstNum = JOptionPane.showInputDialog( "Enter product number 1-5" );
        // second number entered as string
        secondNum = JOptionPane.showInputDialog( " Enter quantity of items sold" );
        // convert values to type double or int from type string
        prodNum = Integer.parseInt( firstNum );
        quantity = Double.parseDouble( secondNum);
        switch (prodNum)
            case 1: // 1st product
            total = 2.98 * quantity;
            break;
            case 2: // 2nd product
            total = 4.50 * quantity;
            break;
            case 3: // 3rd product
            total = 9.98 * quantity;
            break;
            case 4: //4th product
            total = 4.49 * quantity;
            break;
            case 5:
            total = 6.87 * quantity;
            break;
            default: JOptionPane.showMessageDialog( null, "Wrong product number entered" );
        JOptionPane.showMessageDialog( null, moneyFormat.format(total), "Total Price of Items Purchased", JOptionPane.INFORMATION_MESSAGE );

PLEASE NEED HELP WITH OUTPUTTING HDV/DV!! 16:9 to 4:3!! NEED HELP NOW!

Similar Messages

Maybe you are looking for