Please Note the Anouncement
Hey all,
iChat 3 now has it's own Announcement/FAQ link sticky.
Hopefully as we can now send in new FAQs and get old ones Updated there will be more in there. soon.
It has those that have been done already and instructions on how to search for more.
That is
Enter kichat as the search word in the box top right above the welcome to (you)
Search the Users Tips Library
Set the Date to All
Hit the search button again
Use kiSight for isght searches.
Not changing the Search Discussion area will produce results from the Forum or Category you have in the box.
Restricting it to 90 days will limit it to the new ones.
Most of the Older FAQs need new Links and in some cases Updating.
9:23 PM Friday; March 17, 2006
Please check if you have proper rights to schedule to FTP. You can create a new job server, whenever you schedule it, there are multiple job servers, it will handle based on the load. But it is not mandatory, depends on the load.
Similar Messages
-
Hi
In BO 4.0 SP 9 when a administrator tries to schedule a report via CMC there is no error
But when a user schedules a report and the destination is FTP location -> Use default settings he gets following error
Destination disabled. []: [CrystalEnterprise.Ftp]. Please note the name of the job server used for your request and contact your system administrator to make sure the specified destination is enabled. (FWB 00031)
There is only one Job Server and the destinations are enabled in it
There is no Job server for Crystal Reports Job Server
Do i need to create it and how.Please check if you have proper rights to schedule to FTP. You can create a new job server, whenever you schedule it, there are multiple job servers, it will handle based on the load. But it is not mandatory, depends on the load.
-
k
Use Mitsubishi's MX Component. This utilises activex and I have successfully managed to develope VI's to both read and write to the PLC for control and datalogging. MX Component currently retails at 299 GBP and I do not know of any other protocol on the market that you can use(Mits have told me that they do not know of any either and were not even aware that MX Component could be used with LV until I proved it to them).You can use this by directly connecting to the PLC using one of many different communication protocols(serial, ethernet, profibus etc.)
I am not sure how this will tie in with your SCADA package, are you using this as your front end because by using LV and MX Component you could do away with any bespoke SCADA and easily develope your own. I am curren
tly working on a VI that reads data from the PLC (FXon-24MR)in real time, displays it on a graph and logs it to a MySQL database complete with report production.
If you would like further details on how to use MX Component with LV(Its a doddle, really)then please email me at [email protected]
Yours
Mark lea -
Could not receive classifications from UDDI server. Please change the UDDI.
Hello:
Im trying to connect from CE in Visual Composer to the
UDDI url: http://xi.esworkplace.sap.com:50200/uddi/wsdl/uddi_v3_service.wsdl
but when I try to explore advance search in VC it shows me the following error:
Could not receive classifications from UDDI server. Please change the UDDI server.
Any idea?
Thanks
Regards
Mario GHi,
The one that Mario is saying is not in NWDS its in CE I guess. I too face the same difficulty. I give the following details that I did in my local CE. After saving the setting I tried to clickd service registry I get some list of errors. Kindly help me and Mario in resolving this. Thanks in advance.
Between Mario the URL of the UDDI and classification is changed now... please note the details that I have set.
==================================
Destination Type: WSDL
Destination Name: UDDI_DESTINATION
URL: http://sr.esworkplace.sap.com/uddi/wsdl/uddi_v3_service.wsdl
System: Java
Authentication : HTTP Authentication
User ID/Password (Basic)
User ID: sruser
Password: eswork123
====================================================
Destination Type: WSDL
Destination Name: CLASSIFICATION_DESTINATION
URL: http://sr.esworkplace.sap.com/ClassificationService/CS?wsdl
System: Java
Authentication: HTTP Authentication
User ID/Password (Basic)
User ID: sruser
Password: eswork123
====================================================
Create new destination Create new backend destination HU2
Destination Type: Services Registry
Destination Name: HU2
System: ABAP
System Name: HU2
Hostname: iwdf1030
Installation Number: 0120003411
Client: 800
Authentication: HTTP Authentication
User ID/Password (Basic)
User ID: <your user in HU2>
Password: <your password>nation CLASSIFCATION_DESTINATION
==============================================
Best Regards,
Suresh -
I dropped my iphone and not the scrren but the upper black part cracked????
I dropped my iphone and not the screen but the upper black part of the phone cracked.... how do i get that fixed???? anyone please just let me know
Yes, I'm sure I know what I'm talking about. Please note the next line in the iPhone Service FAQ:
"Service may not be available if your iPhone has been damaged due to accident or abuse. "
and later down the page:
"Apple reserves the right to refuse service on iPhones that are outside their warranty period if damage has occurred due to accident, abuse, or misuse. In such event, Apple will return your original iPhone to you without performing service, and may hold you responsible for diagnostic fees. "
So again, the OP may not be able to get a dropped iPhone repaired, though calling Apple is the only way he/she will know for sure.
Message was edited by: Dave Sawyer -
Not the average problem with wireless connection. Please help me..
I've been having wireless connection problems ever since I upgraded to Verizon FiOS from Verizon Wireless. Before upgrading to Verizon FiOS in the fall of 2012, my brother's laptop connected just fine with the connection. After upgrading to Verizon FiOS, my brother's laptop could not connect to the internet. It showed the wireless connection signal as Excellent, but I could not access the internet. Either it would be extremely slow or there would be no connection at all. Also, the router would sometimes restart itself randomly, and it was extremely annoying for me since I am hardwired with my desktop.
This was weird because my iPod Touch connected perfectly fine to the wifi. So I thought it must be the laptop. But I brought the laptop over to my cousin's house, who also happens to have Verizon FiOS, and the laptop connected perfectly fine. I called Verizon and none of the technicians knew what the problem was. We tried disabling and enabling the router, changing the channels, and anything that was on the list. They couldn't help me and I was extremely disappointed because not only am I not accessing the internet with my brother's laptop, but I am also paying for the service too. The last technician I called in 2012 decided to send me a new router. I hoped this would work, but it did not. This router, too, would completely reset itself numerous times before settling down and letting me use the internet.
I gave up after that. But in the spring of 2013, I got really fed up with the service I was receiving and I decided to call Verizon again. Again, Verizon tried to help me fix the laptop with their tools and solution guides. But nothing good came out of it, so I decided to ask for a technician to come to my apartment to fix it. We scheduled a day and I was pretty excited since I was almost positive that the connection for the laptop would be fine by then.
I was wrong. The technician came and only stayed for about 20 minutes. He said it must be the laptop or it must be that the walls are too thick in my apartment. But that can't be it since, in my cousin's house, the router is on the second floor and my brother was using his laptop on the first floor. So it couldn't be the laptop nor the house. So we came to no conclusion. He just attached a mini router to the laptop and hardwired it. I wasn't so content but I was glad my brother could finally use the internet now.
About three months pass by and I decide to get myself a new laptop. I get it and I am hoping the wireless connection works. It did, so I was almost positive that it was my brother's laptop that was the problem, not the wireless signal. I go on vacation for a few days and I connect perfectly fine at my friend's house. When I return home and try to connect to my wireless connection, it didn't work!
At this point, I am extremely frustrated. I decided to call Verizon again to replace my router because it was being extremely annoying. It kept resetting itself and I was tired of it. I replaced the router, and this is the router I currently have, but I STILL have the same problem. It resets itself on its own time and I hate it because I'm always in the middle of something. Wow, just wow. There is nothing they could do to help me fix this. I call up a technician, for the millionth time, and he tells me he can't access my router. This occurred with the previous technician who sent me the new router. He tells me his tools are not working and tells me he'll call me back the next day.
It was the next day and I did not receive any phone call. I am extremely disappointed in Verizon FiOS' service and it's customer service. I leave it alone and I just hardwire my laptop to the router. Of course this works, but what's the point of having a laptop when I have to keep it hardwired on my desk? After a day or two, I decide to check if the wireless connection works, and it did. I was surprised. But every now and then, it would shift on and off. Most of the time, the wireless connection is either EXREMELY SLOW or I get none at all, nonetheless, it still says the connection is Excellent.
Please, if there is anyone who could help or try to help me, I would most appreciate it. If there is more information that you need, ask me and I will try my best to provide it to you.Admittedly, that IS a strange case. Unfortunately, it sounds like all possible troubleshooting has been done by the tech support agents. you mentioned that you were dissatisfied with your other service, did it have a similar problem? theres a possibility of dirty fiber or a bad ONT port, but the random rebooting of the router would almost exclusively be a bad router. question: is the router in the same location as before?
-
Admin tool could not load the essbase driver.Please check the configuration
Hi All,
I have obiee11g installed machine and want to connect that machine with essbase.
For that I have installed Essbase Client [11.1.2.1] by downloading the following files,
*1>Oracle Hyperion Enterprise Performance Management System Installer Fusion Edition Release 11.1.2.0.0 for Microsoft Windows (32-bit)*
*2>Hyperion Enterprise Performance Management System Foundation Services Release 11.1.2.0 for Microsoft Windows (32-bit) Part 1 of 4*
*3>Oracle Essbase Clients Release 11.1.2.0.0 for Microsoft Windows (32-bit)*
After that I manually added the ESSBASEPATH and ARBORPATH as Environment Variables (USER).
And also I manually added the essbasepath in bi-init.cmd file.
Finally I tried to connect essbase with BI through BI Admin Tool, I get the following Error
"*Admin tool could not load the essbase driver.Please check the configuration*."
kindly guide me to overcome this issue.
Thanks and Regards
sai
Edited by: 923924 on Apr 24, 2012 5:20 AMUntil you perform the configuration on the AD server, the following message will appear:
Error: Could not start the SSO service. Please check the configuration.
So configure the AD server so that the error message will not appear again. -
my laptop will not open iTunes, as it just says 'This version of iTunes has not been correctly localised for this language. Please run the English version'. I have not synconised my iPhone 5S or iPad 2 with iTunes for well over a year. I noticed the music which had previously been put into iTunes has dissappeared from my phone and iPad. I also want to remove some movies from my iPad and iPhone and there is no way I can do this without being able to manually sync with the Laptop which is running windows 7. Has anyone else come across this and please can you help? I am no expert in fact I know very little about the Laptop, it is my Husbands baby but he doesn't understand anything to do with Apple including iTunes. I will need any advise explained step by step please.
Hi Shelady,
Try downloading and reinstalling the latest version of iTunes from the first link below. If that doesn't do it, the suggestions in the second article should resolve the installation issue.
Apple - iTunes - Download iTunes Now
http://www.apple.com/itunes/download/
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
http://support.apple.com/kb/HT1923
-Jason -
Unable to open the photos in reviewer, every time I click on the photo on , it says do not have permission to view the photo. Please open the item in the finder choose the item and click on <get info>. What am I suppose to change in the setting on <get info>
Back up all data.
This procedure will unlock all your user files (not system files) and reset their ownership and access-control lists to the default. If you've set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it.
Step 1
If you have more than one user, and the one in question is not an administrator, then go to Step 2.
Triple-click anywhere in the following line on this page to select it:
{ sudo chflags -R nouchg,nouappnd ~ $TMPDIR..; sudo chown -R $UID:staff ~ $_; sudo chmod -R u+rwX ~ $_; chmod -R -N ~ $_; } 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window by pressing command-V. I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting.
You'll be prompted for your login password. Nothing will be displayed when you type it. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The command may take a few minutes to run, or perhaps longer if you have literally millions of files in your home folder. Wait for a new line ending in a dollar sign ($) to appear, then quit Terminal.
Step 2 (optional)
Take this step only if you have trouble with Step 1, if it frightens you, or if it doesn't solve the problem.
Start up in Recovery mode. When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar. A Terminal window will open.
In the Terminal window, type this:
res
Press the tab key. The partial command you typed will automatically be completed to this:
resetpassword
Press return. A Reset Password dialog will open. You’re not going to reset a password.
In the dialog, select the startup volume ("Macintosh HD," unless you gave it a different name) if it's not already selected.
Select your username from the menu labeled Select the user account if it's not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select
▹ Restart
from the menu bar. -
Please read my question carefully, this is, I think, a question for the experts. It's not the usual name change question.
When I setup my new MacBook Pro, something slipped by me and my computer was named First-Lasts-MacBook-Pro (using my real first and last name).
I changed the computer name in Preferences/Sharing to a new name and Preferences/Accounts to just be Mike. I can right click on my account name, choose advanced, and see that everything looks right.
However, If I do a scan of my network with my iPhone using the free version of IP Scanner, it lists my computer as First-Lasts-MacBook-Pro! And it lists the user as First-Last.
So even though another Mac just sees my new computer name, and my home folder is Mike, somewhere in the system the original setup with my full name is still stored. And it's available on a network scan. So my full name might show up at a coffee shop.
Can I fully change the name without doing a complete re-install of Lion and all my apps?One thought... you said the iPhone displayed your computer's old name? I think that you must have used the iPhone with this computer before you changed the name. So no one else's iPhone should display your full name unless that iPhone had previously connected to your Mac. For example, I did this exact same change, and I use the Keynote Remote app to connect with my MacBook Pro. It would no longer link with my MacBook Pro under the old name, and I found that I had to unlink and then create a new link under the new name. So the answer to your question is, there is nothing you need to do on the Mac, but rather the phone, and no other phone will display your full name.
-
I am new to Final Cut Express and don't understand why I am unable to drag transitions into Canvas? Something wrong in my setup? It's not the overlays they are "on" so can anyone advise me please, by the way the "L" doesn't appear in the bottom left hand corner either? and by the way how can I get rid of that irritating Blue badge saying "AutoFill your contact details" all mine are in "address book" already!
You can't drag a transition into the canvas. If you're dragginmg a transition from the effects tab you drag it between the edit point of two clips in the timeline.
Make sure show edit overlays is turned on in the Canvas view popup. -
On my iCloud account I can see an alternate email ID which can be used to login to my account, this email ID does not belong to me so I need to delete it. Please advice the best possible way as it does. It show any option to delete that ID
Do the alternate e-mail address ends with me.com or icloud.com?
-
I am trying to copy photos from an iPad to a Mac Air, but iPhoto does not recognize them. Please forgive the ignorance, but we have just started moving to apple products and I know nothing about them. Do you have to use PhotoStream to do this?
How did the photos that you want to copy off get on the iPad ? To copy photos to your computer that were taken with the iPad, copied to it via the camera connection kit, or saved from emails/websites then see this page - on a Mac you should be able to use iPhoto, Aperture or Image Capture
To copy photos that were originally synced from a computer you will need a third-party app on your iPad such as Simple Transfer which can copy them off via your wifi network. But as photos are 'optimised' when they are synced to the iPad, any that you then copy back to a computer may not be exactly the same as they originally were on your computer. -
Hi Team,
I have iphone4 16GB with iOS 5.1.1. While using the phone, few times the phone is automatically going to shutdown and getting call disconnected. Some times, it happens more frequently in a day, sometimes not.
and also, How can I update my iphone 4 from iOS 5.1.1 to iOS 6.1.4 only. I am not looking for iOS 7 right now. Please suggest the update process?You cannot. You can only upgrade to the currently supported version of the iOS which, at this time is iOS 7.0.2.
-
I can´t syncronize my Iphone 5 with Itunes 11.1.5.5. The option looks like locked in the menu. I have tried reinstalling Itunes but this is not the solution. Actually my PC runs under Windows 8.1. and Iphone runs under IOS 7.1. Someone can help me, please?
It seems I have solved my own problem . . . well hopefully !! ;-)
I was using a 'non' Apple cable. When I swithced to using the stock cable that came with my iPhone, iTunes can now see that I have a 'Device' and identifies it correctly as my iPhone.
Hopefully this may help others . . . ?
Cheers,
Grant.
Maybe you are looking for
-
How do I make a 'favorite' folder for audio effects ?
In the effects browser, the list of effects is very long, and the classification is not at all user-friendly. How could I group the effects I use often in a folder ?
-
I want to create an HTML table of img maps dynamically from DB retrieves...
Hi, How do I build dynamic HTML code in a function and then populate a HTML region to render it.. (did I say that right?) I want to create an HTML table of img maps dynamically from DB retrieves... Thank you, Bill
-
How to setup the cluster environment for BPM using weblogic
want to setup the cluster environment for BPM using weblogic.... i have installed the oracle weblogic server 10gr3 and oracle BPM enterprise for weblogic 10gR3 i have used the Admin tools from the "oracle BPM enterprise for weblogic" to setup the con
-
hi alll what is the use of ODS in Lo extraction if use update method as Unserialised V3 update
-
How to create workflow container element from workflow builder?
How to create workflow container element from workflow builder?