Please Please Help...My t6100 sound quality is very poor

I cut the speakers wire to extend the wire to be make as home theatre. i cut four speakers wire and extend it. but i didnt cut the front right speaker which is enabled with sound control. after fixing it the sound quality is very poor other than front right speaker...any one knows please help and give solution....

Hello button172
If you are having an issue with your purchase, then report it to the iTunes Store.
How to report an issue with your iTunes Store, App Store, Mac App Store, or iBooks Store purchase
http://support.apple.com/kb/HT1933
Regards,
-Norm G.

Similar Messages

I play my music via an airport express attached to my hi fi system. Since upgrading to maverick the sound quality is very poor. It sounds very flakey with the volume level going up and down. Tried Ethernet and wireless, but no good

I play music on my hi fi via an airport express attached to my iMac.
Since installing maverick the sound quality is terrible and I get frequent distortion, which never happened before.
I have reset the airport express and reconfigure my wireless settings. I have also used Ethernet on its own but still get the same sound problems.
I would love to turn itunes sound off as you used to be able to do, but this I believe can't be done.
Has anyone else been having the same types of problem, and better still has anyone got the answer?

Radcolt wrote:
So if I connect my ipad or iPod to an airport express that is being "extended" from the main airport express (the main router which is plug into my audio system), I should still be able to listen to my music, correct?
Yes but be sure to turn on Airplay at whatever Airport connects to the audio.
Radcolt wrote:
Also, will the date rate be decreased if they are connected by cat 5e Ethernet cable? I thought signal drop is minimal.
That's a whole different ball game and a much better solution if it's practical to implement. The data rate will not decrease.

HT201401 when flash is turned to on mode, it never flashes and picture quality is very poor

when flash is turned to on mode, it never flashes and picture quality is very poor

I've tried by turning off flash,
picture quality will be good in daylight.
but
when flash is turned to automatic mode it never flashes in any lighting condition

I purchased a song from iTunes but the quality is very poor. How do I contact iTunes to get a proper copy?

I purchased a song (Donny Darko 'Mad World') from iTunes but the quality is very poor. The piano content recording is overloaded. All other downloads are satisfactory.
How do I contact iTunes to get a proper copy?

How to report an issue with Your iTunes Store purchase

HELP! The Sound Quality is poor on my IPOD

I just purchased an I POD 30G - Have downloaded songs directly from my CD collection... they sound great, except for those scratched CD's... My issue however is with other songs I had on my computer previously from other downloaded sites. Some play very loud and others play very soft and low... there is no consistency & its getting frustrating... I looked on this site for some help, but did not find anything concrete... is there a way to have all my songs on the IPOD play at the same sound quality/level? without having to go into each song & manually manipulate it? Please help....

I tried this already based on some of my previous
research... Once I clicked on it... it seemed to go
through all my songs and re-adjust them... but it did
not work...
iTunes scans for volume automatically whenever you import songs, regardless of the 'Sound Check' setting. You also need to set 'Sound Check' on your iPod.

Help Help Help...sound quality suddenly horrible!

So, first of all I'll admit that my mini has been through a lot-its been dropped down stairs, things like that. But it has always worked perfectly besides being a bit scratched up--untill last week. All of a sudden, when I listen to any song on my ipod, the sound quality is just terrible. Every files plays through just fine, but the vocals sound distant and it's a little garbeled, definitely not listen-able..even though thats not a word. And no, it didnt start doing this right after I dropped it, I did drop it a couple weeks before it stopped working properly, though. And I've also tried different headphones, so I know that's the problem. Please help..I'm in trouble without it! And if I have to send it back to the company again....grr. Is this even covered under warranty? I dont even know what THIS is!

Marina,
A lot of people are having trouble with updates, I'd say "If it ain't broken then don't fix it". Do not download any more updates if the version you have works fine. That's too late for you I see...
I've never had a problem with updates so I always download them every time there's a new one.
Have you played your music in iTunes? Do you still hear static, or is it only in your iPod?
So I see going back to the old version of updater didn't work, hmm..tough case.
Have you dropped your iPod? Got it wet somehow?
Have you tried to reset it? Press and hold the MENU and CENTER buttons - at the same time - until you see the Apple logo. This is best done when your iPod is connected to your computer and it might take several attempts.

Zen Vision M - help with mp3 sound quality - decreases after trans

I use the Media Explorer to transfer songs from cd to the player. After?recently upgrading my OS to the XP service pack 2 (even though I don't know if this has anything to do with it), the sound quality of the mp3's has decreased when playing back on the player. Sound is real tinny. I checked the settings and?it's set to the highest quality. I always keep it at that and never change it. What am I missing here?

Check the transfer settings on WMP, it will often override and convert content when you transfer it even when you don't want it to.
Plug in your ZVm and wait for it to be recognized by your computer.Run Windows Media Player(in WMP)Tools->OptionsClick on "devices" tab (You should see your ZVM displayed in list)Click your ZVM in the list, and select propertiesClick the Quality TabChaing the settings from "Automatic" quality detection to manual and set alll the settings to the highest quality. Then give your transfers a try again.

Sound quality is extremely poor out of iPhone head jack.

I have tried every EQ setting the phone has and the sound quality is no way even close to my old Dell MP3 player. It is so bad I am keeping my Dell JukeBox and not using the phone. Why is it so bad? Doesn't Apple have a clue?

+Maybe all the extra electronics on the iPhone (wifi/bluetooth/EDGE) is interfering with the sound coming out.+
You might be right -- you can do some testing by using your phones with another iPod or device as close to the iPhone as you normally use your headphones and see if the interference is still there. If so, it's the iPhone (interference is unlikely to go down the wire, particularly two or three feet away).
I'm with the majority here -- sound is superb (at least on the movies I play -- I don't play music on my iPhone as that's what my Nano is for :>)

Iphoto picture quality suddenly very poor

Hi, I have recently solved a problem with your help in relation to Iphoto running very slow.
I now have another problem. Whilst I was installing the Leopard OS and the TC, I had a problem with the installation (now resoleved) but one of the apple techs (amongst other things) talked me through rebooting in safe mode. After I rebooted, the image quality of my photos seem to very poor when I enlarge them and are very poor when I run a slideshow. Also the photo I use for my wallpaper is also very poor - the pixilation seems to be not quite right.
Does anyone know how or why this has happened or can offer any help in resolving the problem?
Thank you very much,
Eileen

I too have poor image quality since i had a loss of power at the house while using Iphoto. All of my photos were gone from iphoto after reboot. I imported them from the back up file to recover them but since then the quality is terrible.

Sound playing is very poor

desktop config:
hp desktop 6000 pro.
cpu:e7500 core2 duo cpu 2.93g
sata hard disk
problems: when i use adobe presenter to listening online course, the nework speed became slow, and sound playing is very bad.
current solution: turn off core2 duo2 cpu functions from BIOS, the problems is solved.
is there someone can explan this issue to me? and give me a better solution without turn off core2 duo2 cpu functions?
thanks
charles

Hello button172
If you are having an issue with your purchase, then report it to the iTunes Store.
How to report an issue with your iTunes Store, App Store, Mac App Store, or iBooks Store purchase
http://support.apple.com/kb/HT1933
Regards,
-Norm G.

Help please -My HQ photos are being rendered in very poor quality in iMovie

Hi there
I have a problem I cannot solve in iMovie (HD 6.0.3).
I am making a movie/slideshow of photos using very high quality photos imported from Aperture. I'm finding them incredibly BAD quality when it comes to the rendering of finished product, the most obvious problem being the pixellation (seen as wavy lines) when the Ken Burns effect is used. It looks the worst on a plasma television, which it is being made to watch on.
I have burned it at the highest quality I can find, but there is still no improvement. Can anyone help please? I'm doing this as a gift for my parents, but don't want to send them something of inferior quality.
Thanks!
Carly

if you've burned it to DVD, then its probably a standard definition iMovie project which means that is 480 lines interlaced. it makes no difference how high quality the originals are, they'll still be re-sized down to 480 lines and since its interlaced, that means that you're only ever showing every-other line. and because standard definition alternates between the odd and even numbered lines, you'll probably see lots of shimmering in the highlights. it will look worse when you try to stretch it across a high-definition TV because there's interpolation going on to up-convert the whole thing back to the 720 or 1080 lines of high definition.
in short, you'll never really get super-high quality from a standard definition TV and you'll only get good results on a high-def TV if you keep everything high def (720p or 1080p) throughout the entire workflow. and until Apple updates its software to handle Blue-Ray or HD-DVD authoring, it'll be very expensive to master those kinds of discs!
best of luck,
scott
PowerMac G5 2.5GHz Mac OS X (10.4.8) MacBook Pro 2.0GHz

Idvd / imovie movie quality is very poor on my hd tv

I have a sony cx700 hd camera, which will shoot in 1080p, but in order to import into imovie 11 I had to change it to 720p on the camera. I just finished my movie, added transitions, music and stills, burned it with idvd and the quality when played on my hd tv is terrible. Is there any way to import 1080p into imovie 11, would that solve my problem of poor quality on my tv? I am doing my video editing on a mac book pro that was upgraded to lion.
Thanks,
Tricia

Hi
Yes there are several layers to this question.
• HD TV and Your Mac Screen has very high resolution
• iDVD (and other DVD Authoring programs) can only do DVD Standard -
and it is interlaced SD-Video in PAL (25fps) or NTSC (29.97fps)
• Using a Video editor that can not deliver this but just 50% (every second line in the picture) will not help at all
and they are iMovie'08 or 09 or 11. I use iMovie HD6 or FinalCut as they deliver 100%
• Using "Share to iDVD" in any version of iMovie has a BAD effect on my movies so I do instead
a. iMovie'08 to 11 - Share to Media Browser - and as LARGE - not HD or other resolutions as this too makes result suffer. In iDVD I import these movies from Media button/Movies down to the right.
b. Movie HD6 - Just close it and drop the Movie icon into iDVD
Now iMovie can not render - and iDVD does this so much better.
In iDVD - Save as a DiskImage and test this first to see if result got any better.
If You need HD - then Roxio Toast™ including BD-component can be a way but You need a Blu-Ray Player to be able to view.
+ BD on standard DVDs (max 20-30 minutes) - Still un-playable on standard DVD-players
+ Blu-Ray Disk and BD-Burner (also extra cost)
I play back my BD-DVDs on a PlayStation 3 - They look as good as it can be.
Yours Bengt W

I want to make a copy of slide show create from my own photographs and with a an audio track behind them. I have carefully followed the iDVD tutorials and burnt the result to a disc but image quality is very poor. What is wrong?

I want to make a DVD of a slide-show with an audio track behind the photographs. I have carefully followed the iDVD video tutorials but the result is far from satisfactory. The quality of the images on the resulting DVD are blurred and indistict although the original photographs are of a very high quality. Where am I going wrong? Would I have better results from a different program than the inbuilt iDVD and if so so what programs have others found to be better? I should be grateful for some expert guidance.

Hey Falcopebo,
Thanks for using Apple Support Communities.
Looks like you have image quality issues when using iDVD to burn.
iDVD 7.0: Burned DVD has interlacing, pixelation, or image quality issues
http://support.apple.com/kb/ht4078
A standard DVD made by iDVD is made to the standard DVD resolution of 720 X 480, which is smaller than most HDTVs and monitors. When expanded to fit the entire screen or monitor, the image will distort slightly due to upscaling to fit the screen or monitor.
Have a nice day,
Mario

IOS6... How do I see the full screen when watching youtube videos and second the map quality is very poor, foggy most of the time and images overlap to each other... Can I restore to IOS6 if these problems can not be solved?

I just upgraded to IOS6 and I have some difficulties that I never had on IOS5:
How can a see the full screen when watching youtube. Address bar is always in view.
Maps are foggy and some images overlap to eachother.
If these problems can not be solved, how do I downgrade back to IOS5?
Regards,
Luis

Luis757 wrote:
If these problems can not be solved, how do I downgrade back to IOS5?
Regards,
Luis
No, there is no legitimate way to downgrade iOS to an earlier version.
Be patient, Apple will eventually get around to fixing the "bugs" in iOS 6.
You can leave feedback here: Apple Feedback.

Poor sound quality on airtunes and airport express

I recently configured a new Airport Extreme base station and two airport expresses. I used the airport expresses to extend my network but the sound quality is very poor when I run itunes no my stero. can anyone tell me why and how to fix it. The sound is very scratchy and there is no volume.
Rich

Dear All,
I'd like to follow up because I think that the answer to why I am getting poor sound quality my be in how I set up my wireless network. I'd like to get some feedback about this and some help about how to correct it.
My wireless network has three components.
1. "Base Station" which is a new Airport Extreme.
2. Unit "Number 1" which is an Airport Express located in my living room and connected to my stereo. it is 30 feet away from the "Base Station."
3. Unit "Number 2", also an Airport Express that is upstairs in a bedroom and connected to a ruby imac. via its ethernet port.
Wireless strength is excellent in all locations and all other services are working well from a laptop, the ruby mac or the imac. My problem only seems readily apparent when playing itunes through the stereo's speakers.
My wireless system is configured as follows:
Base Station: Wireless mode is set to participate in wireless network and to allow this network to be extended. The WDS mode is main and is set to allow wireless clients. The two airport expresses are identified by ID number as remotes.
Unit 1 and 2 are configured as WDS remotes and to allow wireless clients and identify the base station as WDS main.
I recently configured a new Airport Extreme base
station and two airport expresses. I used the
airport expresses to extend my network but the sound
quality is very poor when I run itunes no my stero.
can anyone tell me why and how to fix it. The sound
is very scratchy and there is no volume.
Rich

Please Please Help...My t6100 sound quality is very poor

Similar Messages

Maybe you are looking for