PLEASE PLEASE HELP really fast audio track!!

Ok here is what I am doing. I have some audio files that we recorded onto an ipod via an imic. I have the files on a flash drive, and I drug them over to garage band. The into music file we made worked just fine, but the audio lecture is really really really fast, like the chimpmunks, and so fast you can't make it out. If I just double click the file and open it in quick time it sounds just normal. I really really really need to get this going, can someone please help me. I need to take the intro track, add it to the first part of this lecture, and then make a audio cast of the two tracks. Can someone out there PLEASE help me. You can email me at [email protected]
thanks so much!

That won't help, he said he recorded onto his iPod which means it was probably recorded at 11K or 22K. The link I posted will solve his problem.
--HangTime [Will Compute for Food] B-|>

Similar Messages

Please help. My audio track is too low after exporting movie made with Premiere Pro to YouTube.

Hello. My crew and I recently completed post-production on an independent film. We used Adobe Premiere Pro 5.0 for video and audio editing. We had a very low budget for production, so we didn't have the best audio equipment to record sound with. So in editing, we had to do quite a bit of sound mixing to minimize background/ambient noise and interferences/distortions caused by large electrical appliances in some indoor scenes, such as taverns and cafes. We managed to clean up the audio, and the audio ultimately sounded great. However, when we exported the film to YouTube, the entire audio track sounded low. To hear the film at an adequate level on YouTube, the volume has to be turned all the way up. I'm wondering what can be done to export the film to YouTube and maintain strong, optimal audio volume/quality. Any help would be greatly appreciated. Thank you and take care.

As Jeff of Safeharbor noted, you really need to check the audio meters in Prpro with your "final" project. I found that I could have a sound level that played fine on my computer, but ... on exporting to a DVD ... was way low and required a very high setting on any other computer or a tv to be able to hear. I hadn't actually looked at the audio meters. On checking them ... yeah, the peak was down about -18, the main content of the talking-heads was below that. After raising it with PrPro's audio tools, the sound was fine.
I'd bet your sound is showing low on the meters ...
neil

Help on adding audio tracks and encoding for Encore Please.

Hello,
Can someone tell me how work and add two different audio tracks to Adobe Encore 2? Example, I would like build a DVD that offers the option to listen the audio in two different languages, and also, wich is the proper way to encode video for DVD in the highest quality possible, eg: Bitarate, 2 pass var rate and so on. I have heard that CANOPUS PROCODER is an awesome software to encode video for DVD.
Thanks a lot in advance.

>my copy of Encore does not have the tutorial to "how to create a menu to select a second audio track (Different language)"
Now I see what you were asking, and I apologise. From your post it looked like you needed to know how to add a second audio stream, not how to create the navigation & menus!!
When setting the links, use "Select Other" option instead of what is in the drop-down list, and this will allow you to specify the Audio stream you want.
Audio 1 should be one of the mandatory streams (Dolby Digital or LPCM)
Audio 2 can be anything you like.
It is a good idea to follow the same convention too - if stream 1 is Dolby Stereo in one timeline, ideally it needs to be set the same in all timelines.

Need help replacing original audio track with song.

Hi experts
I'm in the process of trying to create a movie for my daughters. What I did was film my daughters signing to a song that was playing on a CD player. I'd like to remove the audio track and replace it with the same song I purchased on Itunes. So far I able to import the video and song and put them on the timeline.
Now I can't never get the song I added to the timeline to play. How can this be done? And, please, point me to a good book
Thanks,
Francis Ouellet

Yes, I import both the movie and the song into the browser. Then I drag and drop the video into the timeline (V1) the corresponding audio track is moved automatically to A1 and A2. This plays well. Now I drag and drop my purchased song to the timeline (A3 and A4). If I hit the play button it only plays my video and sound (With a beep every second or so).
It just seems that the video and music tracks aren't linked together. Sorry, just purchased FCE this weekednd

Please somebody help me lost audio after opened logic 9 and X at the same time helpppp

helppp please lost audio after opened logic9 and X together can't find the solution i only have audio in the main output of my audio interface gott a motu 828 MKII somebody help me please

Hello all looks normal when the problem was presented simultaneously opened LPX LP9 and when you return to open a new project or the same project and I only have audio in my headphones output interface, my interface is a motu 828Mk2 the project exists and the interface looks normal in every normal output comprises all looks normal just never sounds like it had passed but never opened the two programs at the same time not to do, I use a digital mixer yamaha normal surface responds as ccontrolador all seems to work perfect but I only have audio output from the headphones even if I motu channel by channel and I assign output sound headset

PLEASE - Need help with system audio files

Hi guys, I'm going to try posting this one last night before throwing my hands up.
I'm having a problem with my MacBook Pro where certain audio, namely in browsers like FireFox or Safari, doesn't output.
YouTube and Google Video stream and display video content correctly, but no audio is output.
System audio such as notifications, as well as iTunes, doesn't seem to be affected.
I tried to follow the steps outlined in another post to check the output Hz setting for my midi device in the Audio MIDI Setup panel. However, this is what my panel looks like:
http://static.flickr.com/48/12917458198120c9319_od.jpg
It's simply blank, with "Output is not supported" displayed where those settings should be.
Any ideas as to the root of this problem? It's almost like I'm missing a .plist file or some other system file, maybe something that got deleted using AppZapper? That's just a wild guess from a recent Mac convert after browsing the forums
Thanks!

First off, it makes total sense that you see "Output is not supported" for you microphone. Change the "Properties For:" drop down to "Built in Output" or whatever output device you are using. You will then see the audio output format and frequencies, but on the left side it will say "Input is not supported"
Second, YouTube and Google Video don't use midi and so the Audio Midi Setup isn't really relevant to your problem at all and you should leave that alone... unless you are you a musician with a midi device setup. Perhaps this is the case, please post if it is. Otherwise you are headed down a blind alley messing with "Audio Midi Setup" to diagnose OR fix your issue.

Help needed rearranging audio tracks

I am creating a video for the Christmas special at church. I have the music and vocals on split tracks. I converted them into mp3's and inserted them. I am using the tracks for the timing of the video sequences. Once done with the video I would like to remove the vocal tracks and replace them with the music tracks so I have audio on both channels. So basically, I want to delete the right channel and replace it with a copy of the left channel. Is this possible?
Message was edited by: Soundguy65

You should not work with MP3s in FCE. Use AIFF at the correct sample rate.
If these are stereo pairs, in the timeline select them and use Modify>Stereo Pair to toggle them to mono tracks. Hold the Option key so you can select the tracks separately. Select the vocal track and delete it. You don't need to duplicate the remaining track, simply center the audio with Modify>Audio>Pan Center.

Audio Track has gone white - cant hear it, please help!

Hi
One of my audio tracks has been highlighted white and will not play back. I have soloed the track and it wont play even though i can see the data (wave) in the region. The track is also not muted. Is the data accesible again?
Please help,
Thanks
Jonny Spall

Is the data accesible again?
Probably, it is maybe muted (does it have a bullet in it's name?-there are several places to mute). It an also be muted with the light blue "M" button-your description is a little cofusing though.

Hello.. I try to make copy an audio track(AIFF-C audio) on another dvd but I can't. I was try to made an ''burn folder'' with the audio track but did burn it. Please could someone help me?

Hello.. I try to make copy an audio track(AIFF-C audio) on another dvd but I can't. I was try to made an ''burn folder'' with the audio track but did burn it. Please could someone help me?

You appear to be having a hardware problem. Make an appointment at the Genius Bar of your nearest Apple Store to get a diagnosis.

GAHHHH! Dead line coming up really fast! HELP PLEASE!

I finished a project on imovie 09 and I imported it into idvd. I watched it through the idvd application before burning it and there is audio playing on top of my actual audio from clips in my library that I'm not even using on the project. I need help really quick here! Thanks a bunch.
Message was edited by: Reks7910

Hi
*Not knowing the origin to Your problem - General approach when in trouble is as follows:*
• Free space on internal (start-up) hard disk if it is less than 10Gb should rather have 25Gb
• Hard disk is untidy: Repair Permissions, Repair Hard disk (Apple Disc Util tool)
• Delete iDVD pref file - *or rather start a new user/account* - log into this and re-try
iDVD pref file resides: Mac Hard Disk (start-up HD)/Users/"Your account"/Library/Preferences and is named:
com.apple.iDVD.plist
While iDVD is NOT RUNNING - move this file out to desk-top.
Now restart iDVD.
• Program miss-match: iDVD 5.0.2, Mac OS X.4.11 AND QuickTime 7.5.5 - is OK - DON’T work under Leopard
• Program miss-match: iDVD 6.0.4, Mac OS X.4.11 AND QuickTime 7.5.5 - is OK (might work under Leopard)
• Program miss-match: iDVD’08 v. 7.0.1, Mac OS X.4.11 AND QuickTime 7.5.5 - is OK (might work under Leopard)
• iDVD (08) v7 Locate theme folder. Move out iDVD1, iDVD 2 and eventually iDVD4 folders to desktop - re-try
• Try a Cleaning CD/DVD that cleans the laser lens on the DVD burner/player
iDVD 6.0.4 and iDVD 7.0.1 are compatible with Mac OS X 10.5 Leopard
Last resort: from Craig: Solved the problem!! Finally!!
I deleted every iDVD application and folder from my boot drive,
emptied the trash and then installed iDVD 08 using the customize option
and I am up and running.
Yours Bengt W

My project has lost the audio track. I imported tracks from iTunes, they are in the project but do not play, please help?

Hi...my movie project has lost the audio track. I can see it but nothing plays.
The movie record has its audio but the imported iTunes track is silent.

This might sound weird, but here's an idea which worked for me re music that was newly added to itunes and showed up in my ipod but wouldn't play - I simply played the tracks in itunes first, just a second of time or so will do it, not the whole track, then connect the ipod and sync again and this time they played - hope this helps.

Problems Sycing multiple Audio tracks with Video. Please help

I have a video clip from my Cannon 70D that im trying to sync with 2 seperate audio tracks from my Zoom. One LR stero track and one wireless mic track.
I select all three clips in the event windo and chose SYNC CLIPS from the clip menu. I take the Syncronized clip and place it in the time line , but when i go to expand audio there are only two track available - The scratch audio from the camera clip and what appears to the LR audio from the Zoom. Hard to tell though because Final Cut renames the Audio for me. I did notice that the sample rate on the video and audio files are different. Could that be the problem?

I haven't had much luck with SYNC CLIPS. I suggest you use Multicam instead.
Go to the Inspector and set up your Canon video as Angle 1. Set Zoom XY as Angle 2, and set Zoom wireless mic as Angle 3. Then Select the clips and FILE/NEW MULTICAM CLIP.
http://help.apple.com/finalcutpro/mac/10.1/#ver23c764f1

Making more audio tracks ...please help

hi im actually running logic pro 6 now i hope what im gonna say makes scence!
I only have 4 audio track ive worked out how to create more but although it makes new audio tracks on the arrange screen something is weird its like it hasnt created new one,s just copied ones that are already there for example it i put audio on it and play the track it will cut out audio that was already on one of the 4 tracks initially its like i can have any ammount of audio tracks on the screen but can only play 4 at a time as im making dnb i want numerous beats layered there has to be something im overlooking, all help appreciated guys

what do you mean? like where do i keep the gband file? i keep then all in a folder...
Macintosh Hd -> Jared (folder) -> everything for cd (folder) -> new album (folder) -> song "the gband file"

Changing The Tempo Of Audio Tracks....Help Please!!

Hi,
I've been pulling my hair out! I bought Logic 9 today, and have been trying to find my feet making a mashup of Enya's Orinoco Flow and The Prodigy Smack My B*tch Up....It's one of the easiest 2 tracks to mix apparently. Right...to the problem, and i'm sure it's a simple one for anyone with some Logic knowledge...
The BPM for the prodigy song in audio track 1 is 136.2 which is the base bpm i want to keep for the song...
I then import Enya into Audio track 2....How on earth do i change the tempo of the enya track to 136.2 ??!! I have tried everything (Except what works, clearly)
I hope that makes sense...Any help would be apreciated!
Thanks

shaunjames79 wrote:
a mashup of Enya's Orinoco Flow and The Prodigy Smack My B*tch Up....It's one of > the easiest 2 tracks to mix apparently.
Are they? Wow, I had to read that bit twice, but I suppose the suggestion is that they're not too far apart in terms of tempo anyway - try establishing the tempo of both of them exactly, then you've got an idea about how much you need to adjust one against the other if the maths is too difficult (it is often for me, I prefer just to listen to it and try things and then decide).
Have a look at using the Time Machine for starters, anyway and do a bit of research in the manual and the Software Instruments manual as well - you can do things like that with the EXS24 sampler but in a different way, you know.
Message was edited by: chorleyman
Message was edited by: chorleyman
null

No output from recorded audio tracks, only midi tracks..please help

I've been working on a song in Garageband and suddenly lost audio from real instruments and can only hear the midi from last night until today. It consists of 3 midi tracks and 9 audio tracks. I have software plugins or FX on almost all 9 tracks with amplitube or similar. Things are slow as the arrow is red at the top, however last night I was able to still make changes - slowly. I was able to do a mixdown and export to mp3. Then I shut the computer down. Today I open up Garageband and can only hear the midi tracks of my song however other songs I have work totally fine. Nothing is muted and I've checked everything. Levels meters are moving on all the tracks, I can just feintly hear one guitar track. This is frustrating. I even tried locking half of the tracks and still nothing. I've rebooted etc and same
I'm running Lion with a TC Konnekt 8 sound module, on a 2.4 core duo 2 MBP with 4 GB of ram

I ran onyx and did a clean up etc then rebooted, loaded GB and same problems. I turned on the ducking thing, everything looked ok and then once I hit play everything worked again. I've turned off ducking and it still works. Could this be a glitch as I've never enabled it before

PLEASE PLEASE HELP really fast audio track!!

Similar Messages

Maybe you are looking for