Please post if you are happy with Time Capsule

Of course I know that folks generally only post here if they are unhappy or having a problem with something. I am seriously considering purchasing the 1TB TC and would really like to hear if others are happy with its performance, both as a router and as a backup device.
I have 4 Macs (24" Intel iMac, 20" Intel iMac, 2 Intel MacBoks) and one Win XP to be sharing the internet ......not all at the same time, of course. Only the Macs will be backing up to TC.
What kind of network speed can I expect? Will I get the faster n speeds from this setup? Will having 4 computers backing up to TC affect the speed at all?
I am simply interested in hearing from anyone who is successfully using TC and find it working well for them. Anyone like that out there? I hope, I hope, I hope .....
Thanks!
Kathy

I am now. At first it had some problems, from what I can tell ALL related to the machine/device names having apostrophes in them. This is a standard Apple thing. When you setup your device (a Mac) it says enter your name. I entered "mrh" without the quotes of course. Many things got labeled: "mrh's thing..."
So when TC arrived I hooked it up and had all kinds of problems with connections, backups failing, etc. When someone posted taking out the apostrophes in the names it all clicked and started to work.
It does run warm. I put mine on my old aluminum heat shield for my MBP 15. The thing ***** heat away from it and it is staying nice and luke warm now.
Speeds for me are acceptable. The only concern I currently have is I have two macs... 1 - MBP17 my main work Mac. 2 - MacMini used for music.
The MacMini recently was freshly reloaded with leopard. It has little on it. When TM backed it up it said it was gonna back up 38g. That is what it did. The sparse bundle on the TC shows 38g roughly for the Mini.
My MBP17 (which is hard wired) said it needed to backup 138g. At about 1/3 of the way through the backup it suddenly (unfortunately I was gone) said it was done. When I look at the sparse bundle for the MBP it shows barely 42g. So my question is did the initial backup work or not? It seems not. However TimeMachine is quite happy with the way things are and is showing history and everything just fine.
I relay on TimeMachine for file recovery. So I'm not too concerned if it did miss something. I use SuperDuper on a weekly basis to a different disk for total recovery. I figure if everything really crashes I can replace the MBP (either it or it's drive) and use SuperDuper to do a full restore, then TM to get any files that need to be brought up to date.

Similar Messages

No Audio on Main Menu - Please post if you are having this issue....

Howdy...
I am having trouble getting any audio on the main menu. I can drag and drop audio files (non-DRM) to all my menus, and it shows up in the inspector, but when I preview or burn a disc, the main menu has no audio. All of the sub-menus have the audio just fine, but not the main.
I'm currently using the 'Stretch' theme...
Again, all sub menus work just fine, but the same audio will not play on the main menu.
Does anyone have a solution?
If you are also having this problem, please post here...
Thanks...
Best,
Ben

I've stumbled onto the reason for this problem. It's because you unintentionally muted your audio for this menu. To resolve it do the following:
1. Open the menu where you are having audio problems
2. Click on the drop zone icon to open the drop zones
3. Move the music (the iTunes music notes) that you've placed here out of the menu box
4. By getting the music icon out of the way, you will reveal a tiny black sound/audio icon
5. If you strain your eyes and look real close you will see that there are no sound waves coming out of the sound icon
6. Click on the icon and tiny black sound waves will appear
7. You have now "unmuted" your menu
8. Drop your music selection back into the menu drop zone
9. You now have sound!

How do I know which unpowered USB HDs are compatible with Time Capsule?

Hi all
I've now tried a couple of different unpowered USB drives in my Time Capsule and been unable to find one that works.
I know that the Airport Utility needs to be configured to configure the Capsule for sharing. I know that the drive should be formatted as journalled. I have had HDs work well that are powered independantly. I know that unpowered drives that draw excessive power would be problematic; althought the drives I've tried draw 2mA which is hardly much. All of that said, I can only get powered HDs working, and not unpowered.
Any helpful ideas?
Much appreciated!
Thanks and regards
Daniel

Bob Timmons wrote:
Due to poor design, the Time Capsule power supply has enough of a problem just powering the hard drive and router portion of the product. Adding more load to an overtaxed power supply...which tends to overheat easily....would not be recommended if you want to prolong the life of the Time Capsule.
Pay particular attention to this.. Bob is a smart bloke..
The power supply of the TC is barely adequate.. having repaired 100 or more now.. let me assure you the last thing it needs is more load.
Also note the power consumption of a standard 2.5" drive..
I have several lying arond here.. 40GB fujitsu.. 5v 0.55a
80GB hitachi.. 5v 1A
Well those are old drives..
500GB Seagate Momentus 7200.4 which is a standard drive used now in laptops and faster speed.
5v 0.451A
Sounds great.. just below the 500ma limit.. but download the manual for the drive.
Table 3:          DC power
Power dissipation +5V input average (25° C)
Spinup (max) 1.0 amps
Seek   2.2 watts
Read   2.1 watts
Write   2.2 watts
Idle, performance* 1.4 watts
Idle, active* 1.0 watts
Idle, low power mode*   0.69 watts
Standby 0.20 watts
Sleep 0.20 watts
The actual current draw during spinup.. is 1A.. not 0.45 as per the drive label.. that is normal usage not spinup.
Also remember a USB powered hard disk has to power the electronics of the USB to sata adapter.. that might be 2ma.. you quoted.. ie no drive.. but it absolutely is no where near enough.. even in standby or sleep the drive is drawing.. 40ma..
That is from the actual spec sheet.

Please post if you have WiFi with WPA2-PSK and WEP working on iPod ios4

Quite a few people seem to be having difficulty with getting WiFi with WPA2-PSK and WEP working on iPod ios4. I'd like to know if anyone does have this working. Please let us know iPod model, access point (router) model, and security settings on your setup. I'm reluctant to upgrade if I can't get WiFi because quite a few of my favorite apps need the net. Please do NOT post to this thread if your WiFi is NOT working. Thanks
I have:
1. brand new (not yet even initialized) 32GB iPod Touch
2. iPod Touch 8GB 3rd Gen
3. Netcomm gateway/router/access point with security set as noted above.
Edit: if you don't know what Gen your iPod Touch is, please see:
http://support.apple.com/specs/#ipodtouch
The easiest way to tell 2nd from 3rd gen is that 3rd gen has bluetooth (look in Settings/General -- if Bluetooth is there, your iPod is 3rd gen, if not it's 2nd gen or earler).
Message was edited by: KumbiaKid

Thanks a lot to all who responded. I now have registered and upgraded my brand spanking new 32GB iPod Touch to ios4. Before I updated, I registered the new iPod, set up and checked the WiFi connection as described in my OP (except that it was AES - not WEP as noted above) and it worked just fine. I then updated to ios4 and it still worked fine, with no further input from me. It just connected as it should have after the update and all internet functions connect and work as expected.
To those who have had problems, my sympathy, but the problems are clearly not due only to ios4 -- there has to be something else going on with your connections.
Message was edited by: KumbiaKid

MacBook Lost Connection With Time Capsule, Unable to reconnect

On my first attempt installing time capsule and setting up airport was ok. Then one day, I completely lost the connection. Now my MAcBook can not find time capsule or airport.
I have tried the following:
1. Resetting the Arris modem and the time capsule.
2. Unplugging and disconnecting everything, re-install the Time Capsule Set up disk.
3. Updated software on mac website.
Still., the light continues to blink amber, when I have my computer scan it doesn't find anything. It will not allow me to choose manual setup. This is very frustrating. Please help. I'm about to return it. I'm wasting a lot of time on something that should work.

Here is the setup I use to configure my Time Capsule. Haven't had a problem with it since day one - even through multiple reconfigures for testing purposes.
*_How Do I Setup Up My Time Capsule As My Only Router?_*
Naturally, the possible combinations of modems / routers / Airport Devices / etc. cannot be accounted for in one set of instructions. However, if you are using your Time Capsule as your only router, and not attempting to add it to an existing network then the following instructions should be helpful:
*Verify Cabling*
Phone line --> phone jack on your ISPs modem.
Next, attach an ethernet cable between your ISPs modem --> and the WAN port on the Time Capsule (that’s the little round ‘wheel’ symbol), NOT to one of the LAN ports <•••>.
There should be no other devices between your ISPs’ modem and the Time Capsule.
*Reset Time Capsule*
First, if previous attempts to configure the Airport device have failed, it’s a good idea to reset it following steps outlined in this KB article:
[http://support.apple.com/kb/HT1300]
Make sure you hold in the reset switch for a good 10 seconds, then release.
*Reboot ISPs’ Modem & Time Capsule*
Make sure that any time you disconnect and reattach the TC (or any wireless router) to your ISPs modem, that you cycle the modem's power off and on. Sometimes it doesn't forward the IP address assigned by your ISP unless it is rebooted.
If you are using the Time Capsule as your only router then power down your ISPs modem.
Unplug the TC from the wall outlet.
Wait 10-15 seconds.
Next turn your modem back on first. Let it initialize and acquire an IP address (about 30-60 seconds).
Plug in the TC back in again.
After it has restarted (30-60 seconds), the amber light will slowly flash.
*Configure Airport Utility*
Next, launch Airport Utility.
Highlight the device on the left and click “Continue”.
You may be asked if you want to “Reset” or “Restore” one of the configuration profiles. Select “Reset”, and click “OK”.
Name your Time Capsule. Keep it short and simple. Use only letters & number, no special characters.
Enter the password twice and check “Remember this password in my keychain”. Avoid using a “different password to secure disks” for now.
Click “Continue”.
Airport Utility may “discover existing wireless networks”. If the Time Capsule is your only router, then choose “I don’t have a wireless network…”, and click “Continue”.
Name the new network. Keep it short and simple. Use only letters & number, no special characters.
Enter a password for your new network twice, check “Remember this password in my keychain”, and click “Continue”.
Select “Share a single IP address…” and click “Continue”.
If you are presented with a dialogue box warning you of a blinking amber light, click “Ignore”.
At “Select how you connect to the internet” choose the type of service. (Most will choose “I use a DSL or cable modem with a static IP address or DHCP”.)
Click “Continue”.
For “Configure IPv4” choose “Using DHCP”.
Enter the DNS server numbers provided by your ISP. If you don’t know what they are, many have had success using the ones provided by OpenDNS:
208.67.222.222 and 208.67.220.220
For “Domain Name” enter what is provided by your ISP. (i.e. dslextreme.com)
For “DHCP Client ID” enter what is provided by your ISP. (i.e. dslextreme)
Click “Continue”.
Review the Summary and then click “Update.”
If you are presented with +“This device and its network services will be temporarily unavailable”+ click “Continue”.
At “Congratulations! Your Time Capsule is configured…” click “Done”.
NOTE: If, after the Time Capsule restarts, you are present with “Problem 1 of 1: Internet Connection”, click “Continue” and then “Ignore”.
Select “Update my Time Capsule with these settings”, and click “Update”.
When the Time Capsule reappears, click “Manual Setup”.
Select “Wireless” in the toolbar.
Click the “Internet Connection” tab. Here you may see an IP address that looks similar to this, “169.254.96.123”.
Click the “Renew DHCP Lease” button.
The number beside “IP address” should refresh in a few moments.
If the “Update” button in the lower right becomes active, then click it.
*Join the New Network*
Finally, go up to the Airport menu. Give Airport a few moments to scan for available networks. When your new network appears, select it from the list.
At “Mac OS X wants to use your confidential information…” click “Always Allow”.
You should now be connected to the internet.
Cheers!

Epson Print Servers compatible with Time Capsule?

First up: I'm no techie. Epson tells me I will need an Epson print server to enable me to print wirelessly on my ADSL-Time Capsule 500GB (7.3.2)-Airport (5.3.2) network, using an Epson DX8400, which they tell me doesn't support network printing: so far so bad (& so much for the cheap all-in-one printer). Can anyone tell me (if there is no other way of achieving wireless printing) if the Epson print servers are compatible with Time Capsule? I don't have the tech spec to hand, but there are only 3 PSs on the Epson website, 2 of which appear to be the same but vary by a few pounds in price (about GBP150). This was an expense I didn't want, but if I can print wirelessly (AND IT WORKS!) I will pay it, because I want to get a desktop model as well soon & will want to print wirelessly from that as well. I have posted this to the Time Capsule forum as well, but any help gratefully received. Thanks in advance.

yep am using a usb hub,time cap. has only the one usb port- yes two usb outs on the hard drive , sorry, which merge into one into the hd, is bus powered...

Clone with Time Capsule

I am currently using TC to back up my iMac and my Macbook.
Can I also use SuperDuper to make a clone of my iMac? I have a 500GB TC.

Hello Gerard and welcome to the discussions.
A few thoughts:
Continue to use your FireWire drive to backup the Entourage Database and Parallels Data Files.
Use Time Capsule to backup everything else, excluding the Entourage and Parallels files. With TC trying to backup every hour, this just won't work with files this large. I know that it is not possible to do incremental backups with Entourage because of the file structure (monolithic, I believe it is called) and assume from your description that Parallels is the same type of file structure. I exclude the Entourage database from my TC backups and instead backup to a small separate USB drive daily. All seems to be well.
If you do elect to use the Time Capsule in your system, you are smart to use ethernet for the first backup. Subsequent incremental backups will go much faster since only changed files will be backed up (assuming you exclude Entourage and Parallels),so wireless should work well assuming a good connection.
Another thought, if you do not need to backup hourly, take a look at Time Machine Editor, http://timesoftware.free.fr/timemachineeditor/, for options on setting the backups whenever you would like with Time Capsule and Time Machine.

Please post the ISO at the same time you post the fast track

Dear Microsoft,
Please post the ISO at the same time you post the fast track. Your update downloads do not always go as planned (you upgrade the whole works, instead of just what changed) and it becomes necessary to wipe and reinstall with the current ISO. Starting
with a defunct ISO and then going through the various hoops to get to the current version is a several day job, not to mention that the same mechanism that caused an update to crash also will occur.
And post it to a web site with a complete list of the various revisions. List them one on top of another. Do not have a separate web page with each new preview that has to be Googled to find. Let us see them all in one place.
Many thanks,
-T

TAM2
Suggest you use the built in feedback tool. That is the only way to contact those who are actually working on the OS.
Wanikiya and Dyami--Team Zigzag
Directions?
--->
How to Send Feedback to Microsoft in the Windows 10 Technical Preview
Carey Frisch
Thank you. Right under my nose!
And they are not letting me use the tool unless I have one of their idiot account. Not going to happen.

Detected use of SPRequest for previously closed SPWeb object. Please close SPWeb objects when you are done with all objects obtained from them

HI
i am keep seeing this message in ulsviewer of splogs in a webfront end server
Detected use of SPRequest for previously closed SPWeb object. Please close SPWeb objects when you are done with all objects obtained from them, but not before. Stack trace:
at Microsoft.SharePoint.SPWeb.get_Exists()
at Microsoft.SharePoint.WebControls.CssLink.OnLoad(EventArgs e)
at System.Web.UI.Control.LoadRecursive()
at System.Web.UI.Control.LoadRecursive()
at System.Web.UI.Control.LoadRecursive()
at System.Web.UI.Control.LoadRecursive()
at System.Web.UI.Control.LoadRecursive()
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
at System.Web.UI.Page.ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
at System.Web.UI.Page.ProcessRequest()
at System.Web.UI.Page.ProcessRequest(HttpContext context)
at ASP._layouts_icc_icc_scan_view_aspx.ProcessRequest(HttpContext context)
at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()
at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)
at System.Web.HttpApplication.PipelineStepManager.ResumeSteps(Exception error)
at System.Web.HttpApplication.BeginProcessRequestNotification(HttpContext context, AsyncCallback cb)
at System.Web.HttpRuntime.ProcessRequestNotificationPrivate(IIS7WorkerRequest wr, HttpContext context)
at System.Web.Hosting.PipelineRuntime.ProcessRequestNotificationHelper(IntPtr managedHttpContext, IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags)
at System.Web.Hosting.PipelineRuntime.ProcessRequestNotification(IntPtr managedHttpContext, IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags)
at System.Web.Hosting.PipelineRuntime.ProcessRequestNotificationHelper(IntPtr managedHttpContext, IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags)
at System.Web.Hosting.PipelineRuntime.ProcessRequestNotification(IntPtr managedHttpContext, IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags)
adil

Hi,
Your SPweb object is not disposed properly.
http://social.msdn.microsoft.com/Forums/sharepoint/en-US/3a25eb86-8415-4053-b319-9dd84a1fd71f/detected-use-of-sprequest-for-previously-closed-spweb-object-please-close-spweb-objects-when-you?forum=sharepointdevelopmentprevious
http://sharepoint.stackexchange.com/questions/50793/detected-use-of-sprequest-for-previously-closed-spweb-object-after-spquery
Please remember to click 'Mark as Answer' on the answer if it helps you

Detected use of SPRequest for previously closed SPWeb object. Please close SPWeb objects when you are done with all objects obtained from them, but not before.

I have develop a custom solution for SharePoint Foundation 2010 that provide PDF documents filled with lists data and attachemnts.
If the Customer run the solution to get the PDF we found in the ULS log following entry:
03/07/2014 12:07:20.69 w3wp.exe (0x0B10) 0x18EC
SharePoint Foundation General                       90hv Unexpected
Detected use of SPRequest for previously closed SPWeb object. Please close SPWeb objects when you are done with all objects obtained from them, but not before. Stack trace:    at Microsoft.SharePoint.Utilities.SPUtility.GetLocalizedString(String
source, String defaultResourceFile, UInt32 language)     at Microsoft.SharePoint.SPFieldCollection.get_DisplayNameDict()     at Microsoft.SharePoint.SPFieldCollection.GetFieldByDisplayName(String strDisplayName, Boolean
bThrowException)     at Microsoft.SharePoint.SPFieldCollection.GetField(String strName, Boolean bThrowException)     at Microsoft.SharePoint.SPListItem.GetValue(String strName, Boolean bThrowException)
at Microsoft.SharePoint.SPListItem.get_Item(String fieldName)
at ECM_PDF_Excel.ListClicked.GetECOs(Dictionary`2 searchedEC... e918ecd4-7ed6-44bb-9e4f-d764586a2f79 ...RECONumber)
at ECM_PDF_Excel.PDF.Create()     at ECM_PDF_Excel.Layouts.ECM_PDF_Excel.ECMPDFExcel.ProcessRequest(HttpContext context)     at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()
at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)     at System.Web.HttpApplication.PipelineStepManager.ResumeSteps(Exception error)     at System.Web.HttpApplication.BeginProcessRequestNotification(HttpContext
context, AsyncCallback cb)     at System.Web.HttpRuntime.ProcessRequestNotificationPrivate(IIS7WorkerRequest wr, HttpContext context)     at System.Web.Hosting.PipelineRuntime.ProcessRequestNotificationHelper(IntPtr
managedHttpContext, IntPtr nativeRequestContext, IntPtr moduleData, Int32 f... e918ecd4-7ed6-44bb-9e4f-d764586a2f79
03/07/2014 12:07:20.69* w3wp.exe (0x0B10)                       0x18EC SharePoint Foundation
General                       90hv Unexpected ...lags)     at System.Web.Hosting.PipelineRuntime.ProcessRequestNotification(IntPtr
managedHttpContext, IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags)     at System.Web.Hosting.PipelineRuntime.ProcessRequestNotificationHelper(IntPtr managedHttpContext, IntPtr nativeRequestContext, IntPtr moduleData, Int32
flags)     at System.Web.Hosting.PipelineRuntime.ProcessRequestNotification(IntPtr managedHttpContext, IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags) e918ecd4-7ed6-44bb-9e4f-d764586a2f79
We check the method
        /// <summary>
        /// Returns the ECOs in a Dictionary: ECO Number, Suffix
        /// </summary>
        /// <param name="searchedECRECONumber">Dictionary, with the search ECR/ECO Number</param>
        /// <returns>Dictionary ECO Number, Suffix</returns>
        public static Dictionary<string, string> GetECOs(Dictionary<String, String> searchedECRECONumber)
            SPSite siteContx = SPContext.Current.Site;
            SPWeb webContx = siteContx.RootWeb;
            Dictionary<string, string> listECOs = new Dictionary<string, string>();
            string ecoNumber = string.Empty;
            string ecoSuffix = string.Empty;
            if (searchedECRECONumber.ContainsKey(ConstantData.listClickedECONumberDictionary))
                ecoNumber = searchedECRECONumber[ConstantData.listClickedECONumberDictionary];
            else
                return listECOs;
            // Ich suche die ECO Nummber bei gegebener ECR Nummer
            // Ich brauche den Listen Namen der in den Spalten Realtion ECR Number & Realtion ECO Number einen Wert hat
            SPList dataList = webContx.Lists.TryGetList(ConstantData.listName_ECMExcelTemplateDataLists);
            if (dataList != null)
                SPListItemCollection dataListItems = webContx.Lists.TryGetList(ConstantData.listName_ECMExcelTemplateDataLists).Items;
                foreach (SPItem dataListItem in dataListItems)
                    Object relationECRColumnName = (String)dataListItem[ConstantData.listFieldName_ECMExcelTemplateDataLists_RelationECRNumber];
                    Object relationECOColumnName = (String)dataListItem[ConstantData.listFieldName_ECMExcelTemplateDataLists_RelationECONumber];
                    if (relationECRColumnName != null && relationECOColumnName != null)
                        // Ich habe den Listennamen gefunden in dem Spalten Realtion ECR Number & Realtion ECO Number einen Wert haben
                        string searchedListName = (String)dataListItem[ConstantData.listFieldName_ECMExcelTemplateDataLists_Title];
                        string searchedECOSuffixColumnName = (String)dataListItem[ConstantData.listFieldName_ECMExcelTemplateDataLists_RelationECONumber];
                        // Get the List from variable listName
                        listECOs = GetECOsDictionary(searchedListName, searchedECOSuffixColumnName, ecoNumber, relationECOColumnName);
            return listECOs;
- What take we wrong?
- How can we avoid this message?
Regards
Jonnyenglisch
Ralf Happe - Christobal Colón N° 1 ES 07670 Portocolom Tel.: +34 6961 0375 7 @: [email protected] Skype: ralfhappe msm: [email protected] www.ralfhappe.com ralfhappe | soluciónes

Here the code of GetECOsDictionary:
         /// <summary>
        /// Fill the dicionary with related ECO Numbers/Suffix
        /// </summary>
        /// <param name="searchedListName">String: the name of the list</param>
        /// <param name="ecoNumber">String: the ECO Number</param>
        /// <param name="relationECOColumnName"></param>
        /// <returns>Dictionary</returns>
        private static Dictionary<string, string> GetECOsDictionary(string searchedListName, string ecoNumber, Object relationECOColumnName)
            SPSite siteContx = SPContext.Current.Site;
            SPWeb webContx = siteContx.RootWeb;
            Dictionary<string, string> listECOs = new Dictionary<string, string>();
            SPQuery oQuery = new SPQuery();
            oQuery.Query = "<OrderBy>" +
                                "<FieldRef Name='" + "Title" + "' Ascending='TRUE'></FieldRef>"
+
                            "</OrderBy>" +
                            "<Where><BeginsWith>" +
                                "<FieldRef Name='" + "Title" + "'/>" +
                                "<Value Type='Text'>" + ecoNumber + "</Value>" +
                            "</BeginsWith></Where>";
            SPListItemCollection searchedListItems = webContx.Lists.TryGetList(searchedListName).GetItems(oQuery);
            foreach (SPItem searchedListItem in searchedListItems)
                // Wenn die geclickte ECO Nummer gleich der Listen ECO Nummer ist dann setze die gefundene ECO Nummer
                string foundECONumber = (String)searchedListItem[relationECOColumnName.ToString()];
                string[] splitECONumber = foundECONumber.Split(ConstantData.splitBy_Slash);
                if (ecoNumber == splitECONumber[0])
                    ecoNumber = splitECONumber[0];
                    if (splitECONumber.Count() == 1)
                        listECOs.Add(foundECONumber, "0");
                    if (splitECONumber.Count() > 1)
                        listECOs.Add(foundECONumber, splitECONumber[1]);
            return listECOs;
Ralf Happe - Christobal Colón N° 1 ES 07670 Portocolom Tel.: +34 6961 0375 7 @: [email protected] Skype: ralfhappe msm: [email protected] www.ralfhappe.com ralfhappe | soluciónes

HT201272 can someone help me with this chat session.Font Size You are chatting with an Advisor now. This chat will be recorded. At the end of the session, you can print the transcript or request a copy via email. Privacy Policy Advisor [4:49 p.m.]: Hi, my

Font Size
You are chatting with an Advisor now. This chat will be recorded. At the end of the session, you can print the transcript or request a copy via email.
Privacy Policy
Advisor [4:49 p.m.]:
Hi, my name is Jacob. It'll be just a moment while I review the comments you provided.
Advisor [4:49 p.m.]:
Hello Machelle, how may I assist you today?
Customer [4:51 p.m.]:
Can you please help me recover the new testament of the bible from media group. The have vanished.
Customer [4:52 p.m.]:
I need to recover the lost purchases I made from media group. I had all of the new testament.
Advisor [4:53 p.m.]:
Thank you for this information, I understand that you are missing some purchases. I do want to apologize for this inconvenience. I will be more then happy to look into this for you.
Advisor [4:53 p.m.]:
Would you be able to provide your Apple ID? This is the email used to sign into the iTunes store.
Customer [4:54 p.m.]:
[email protected]
Advisor [4:54 p.m.]:
Thank you, one moment please.
Advisor [4:56 p.m.]:
Were these individual purchases? If so could you provide the name for each individual purchase?
Customer [4:57 p.m.]:
yes it the new testament books of the bible
Customer [4:57 p.m.]:
genesis etc...
Advisor [4:58 p.m.]:
I apologize, but I am not exactly familiar with the New Testament. Would you be able to provide these names for me so I can locate them on my end?
Customer [4:59 p.m.]:
Genisis Mark Matthew Luke John
Customer [4:59 p.m.]:
Exodus Levitus Numbers
Advisor [5:00 p.m.]:
Just a quick question, were these all audiobooks?
Customer [5:00 p.m.]:
Duetoronomy
Customer [5:00 p.m.]:
Yes from media group
Advisor [5:00 p.m.]:
Okay, are you currently on a computer with iTunes installed?
Customer [5:01 p.m.]:
yes
Advisor [5:02 p.m.]:
Unfortunately, audiobooks and ringtones are the only items on the iTunes store unavailable for re-download through iTunes in the Cloud. What I can go ahead and do is try and re-add these audiobooks back to your download queue for re-download. Please note if they have been removed or modified on the iTunes store they may not be available for re-download. Would this be okay?
Customer [5:03 p.m.]:
yes thank you!
Advisor [5:03 p.m.]:
Excellent, one moment please.
Advisor [5:05 p.m.]:
I apologize but after reviewing your account, it looks like we have already issued 3 exceptions for you to re-download your audiobooks in the past. Back on 02/23/2013. I apologize but we will be unable to do another exception for you.
Customer [5:06 p.m.]:
that down load did include the new books of the bible that I had.
Customer [5:07 p.m.]:
that down load did not have the new testament books of the bible that I had
Advisor [5:07 p.m.]:
While reviewing the notes, this was issued to add all available audiobooks bought on your account. I again apologize but I will be unable to issue another exception to you. As the previous advisor did inform you to make sure to back up your files.
Customer [5:08 p.m.]:
the other advisor did not down load the new testament books. The advisor did not restore all of the books that I had originally brought.
Advisor [5:10 p.m.]:
While looking closer, the books that you are missing are no longer available to be re-downloaded. This is the reason why they were not added back to your download queue when he issued them. Unfortunately, as we do not handle the content on the iTunes store you will need to get in contact with the publisher of the content as they were the ones two remove or modify these books on the iTunes store. If you would like I can provide a link to their support site.
Customer [5:11 p.m.]:
yes they are I saw them.
Advisor [5:11 p.m.]:
They may have been modified by the content owner. This will be the reason why they were not added. As Apple does not control 3rd party content on the iTunes store. You will need to get in contact with them as we are unable to re-add this content back to your download queue.
Customer [5:12 p.m.]:
it is I just looked at it in the itunes store
Customer [5:13 p.m.]:
the material is still the same. The store does have it.
Advisor [5:13 p.m.]:
Machelle, if the items have been modified since you bought them, they will be unavailable for us to issue them back to you. You will need to get in contact with the providers for these books as they are the content owners and we do not have access to issue these back to you.
Customer [5:14 p.m.]:
the are still the same bible books that I purchased at the store.
Customer [5:14 p.m.]:
The audio books are the same. When I buy it again nothing will be different.
Advisor [5:14 p.m.]:
Machelle, I understand this. This is what our records are showing. When the previous advisor tried to re-issue them to you they were unable to as they have been modified on the iTunes store.
Advisor [5:15 p.m.]:
In order to receive further support for this issue you will need to get in contact with Media Group as they are the content providers for these audiobooks.
Customer [5:15 p.m.]:
I will buy them from another source. Don't say they have changed. The books are the same books I brought. They are at the store.
Advisor [5:16 p.m.]:
Machelle, Apple does not handle the content for 3rd party publishers on the iTune

MoonSwan wrote:I've never heard of a validating editor but I was recently wondering what exists that could help me. Aside from emacs, what should I search for to find one of these validating editors?
You can use whatever tool you prefer - for someone already using emacs, emacs is a natural choice. Simple, easy to use online tools exist e.g. http://schneegans.de/sv/
Just upload the file in question ('Validate by file upload' option) and click 'Validate':
The '=' character cannot be included in a name. (723:10)
<Terminal="Terminal">
^
Googling 'xml validation' should give you some more tools / services if this one is not good enough.

WARNING - You are dealing with one of the most clueless of the clueless. My PC (I/N Explorer?) is blocking my download. HELP!

WARNING - You are dealing with one of the most clueless of the clueless. My "system" is blocking my FF download attempt. HELP! ?? re the below - URL & troubleshooting info.
Tim Crouch [email protected] 727-424-7733

Hi, papineaubill!
Welcome to The Canon Forums, and thank you for your inquiry!
We appreciate your participation, though we need to let you know that the Canon Forum is hosted and moderated within the United States by Canon USA. We are only able to provide support for Canon products manufactured for and used within the US market. If you live outside the United States, please click here and select your country or region for your support needs.
Feel free to discuss Canon products sold outside of the United States, but please be aware that you will not receive support directly from Canon USA.
Thanks for choosing Canon!

My MacBook Po can not connet with Time Capsule for Internet. Back-up are ok

Hi to all,
If I connect the ADSL line to Time Capsule no Internett available.
If connect the live with eternet cable to MacBook pro all is fine.
Mack book pro do all the backup with Time Capsule in WiFi
Hot to have the MacBook connectid to Time Capsule in WiFe for internet too??
Easy explanation please, I'm really beginner

Your original question was How to use Time Capsule for wireless back-up but not Internet?
There is no reason for you to connect the tower....or anything else...using Ethernet if your goal remains that same as you stated.
If you are asking if you can backup the Tower using Ethernet, and not wireless, then you can connect the tower to one of the LAN <-> ports on the Time Capsule....not the WAN port.
Yes, it appears to work without plugging into my tower.
Correct, it will work.
I just have to select the network that it created. Of course, I have no access to the Internet while this is happening and it can not auto backup, unless I am on that wireless signal.
As I stated, that is the downside to trying to back up without an Internet connection. You have to establish another network...and backup over that network.
If you are asking if you can stay connected to the work network while also backing up to your non-Internet "private" network, that is not possible.

Can you unplug the external hard drive you are using for time machine

can you unplug the external hard drive you are using for time machine and then plug it back in and it work normals because i have a mac book and don't want to always be carrieing the external hard drive every where i go so can you ?

Yes, that will work fine. It will back up normally once you plug it in again. I do this with my MacBook.

Which External Drives are compatible with Time Machine. I plan to utilize it for backups and to connect to an Airport Extreme.

MBP Retina, 15 inch, Late 2013. Intel Core i7. OSX 10.9.4
Which External Hard Drives are compatible with Time Machine.
I plan to use one drive for automatic backups connected to an Airport Extreme.
The connection can be USB or Ethernet and should be expandable.
OR
should I just buy the Time capsule and avoid the compatibility, connection and interference issues.
Thanks

Hi Kappy,
I just saw that on the Apple Support site that "Time Machine is not supported with USB hard drives that are connected to an AirPort Express or AirPort Extreme device", just as you have suggested.
Why is the newest model of the Airport Extreme, which is the model I have, an exception to the Time Machine compatibility?
The following information is from Apple website:
Time Machine works with:
AirPort Time Capsule's built-in hard drive (any model)
External USB hard drive connected to AirPort Time Capsule (any model)
An external hard drive connected to your Mac
Use the Time Machine pane of System Preferences to choose your backup disk(s).
Additional Information
Time Machine is not supported with USB hard drives that are connected to an AirPort Express or AirPort Extreme device.

Please post if you are happy with Time Capsule

Similar Messages

Maybe you are looking for