Please post if you have WiFi with WPA2-PSK and WEP working on iPod ios4

Quite a few people seem to be having difficulty with getting WiFi with WPA2-PSK and WEP working on iPod ios4. I'd like to know if anyone does have this working. Please let us know iPod model, access point (router) model, and security settings on your setup. I'm reluctant to upgrade if I can't get WiFi because quite a few of my favorite apps need the net. Please do NOT post to this thread if your WiFi is NOT working. Thanks
I have:
1. brand new (not yet even initialized) 32GB iPod Touch
2. iPod Touch 8GB 3rd Gen
3. Netcomm gateway/router/access point with security set as noted above.
Edit: if you don't know what Gen your iPod Touch is, please see:
http://support.apple.com/specs/#ipodtouch
The easiest way to tell 2nd from 3rd gen is that 3rd gen has bluetooth (look in Settings/General -- if Bluetooth is there, your iPod is 3rd gen, if not it's 2nd gen or earler).
Message was edited by: KumbiaKid

Thanks a lot to all who responded. I now have registered and upgraded my brand spanking new 32GB iPod Touch to ios4. Before I updated, I registered the new iPod, set up and checked the WiFi connection as described in my OP (except that it was AES - not WEP as noted above) and it worked just fine. I then updated to ios4 and it still worked fine, with no further input from me. It just connected as it should have after the update and all internet functions connect and work as expected.
To those who have had problems, my sympathy, but the problems are clearly not due only to ios4 -- there has to be something else going on with your connections.
Message was edited by: KumbiaKid

Similar Messages

Failed to send email. failed to establish connection with the outgoing email server. Please make sure you have entered the email account and password correctly.

I get the message listed above when I try to email pics. It asked me to set up an email account. I chose gmail. It asked for a password. I'm assuming it was asking for my email password. And yes I may have typed it in wrong, but how do I "please make sure you have entered the email account and password correctly" ??? I can't find out how to get back to that point?

Have you checked your Gmail in-box? See if this helps:
https://forums.adobe.com/thread/1642613

Please post if you are happy with Time Capsule

Of course I know that folks generally only post here if they are unhappy or having a problem with something. I am seriously considering purchasing the 1TB TC and would really like to hear if others are happy with its performance, both as a router and as a backup device.
I have 4 Macs (24" Intel iMac, 20" Intel iMac, 2 Intel MacBoks) and one Win XP to be sharing the internet ......not all at the same time, of course. Only the Macs will be backing up to TC.
What kind of network speed can I expect? Will I get the faster n speeds from this setup? Will having 4 computers backing up to TC affect the speed at all?
I am simply interested in hearing from anyone who is successfully using TC and find it working well for them. Anyone like that out there? I hope, I hope, I hope .....
Thanks!
Kathy

I am now. At first it had some problems, from what I can tell ALL related to the machine/device names having apostrophes in them. This is a standard Apple thing. When you setup your device (a Mac) it says enter your name. I entered "mrh" without the quotes of course. Many things got labeled: "mrh's thing..."
So when TC arrived I hooked it up and had all kinds of problems with connections, backups failing, etc. When someone posted taking out the apostrophes in the names it all clicked and started to work.
It does run warm. I put mine on my old aluminum heat shield for my MBP 15. The thing ***** heat away from it and it is staying nice and luke warm now.
Speeds for me are acceptable. The only concern I currently have is I have two macs... 1 - MBP17 my main work Mac. 2 - MacMini used for music.
The MacMini recently was freshly reloaded with leopard. It has little on it. When TM backed it up it said it was gonna back up 38g. That is what it did. The sparse bundle on the TC shows 38g roughly for the Mini.
My MBP17 (which is hard wired) said it needed to backup 138g. At about 1/3 of the way through the backup it suddenly (unfortunately I was gone) said it was done. When I look at the sparse bundle for the MBP it shows barely 42g. So my question is did the initial backup work or not? It seems not. However TimeMachine is quite happy with the way things are and is showing history and everything just fine.
I relay on TimeMachine for file recovery. So I'm not too concerned if it did miss something. I use SuperDuper on a weekly basis to a different disk for total recovery. I figure if everything really crashes I can replace the MBP (either it or it's drive) and use SuperDuper to do a full restore, then TM to get any files that need to be brought up to date.

My nook app continues to state "Please be sure you have internet connectivity, then try again." I am currently connected to wifi and it seems that all my other apps that need to be connect to the internet are properly working. Help!

My nook app keeps telling me "Please be sure you have internet connectivity, then try again." I am currently connected to wifi and it seems that all my other apps that need to be connect to the internet are properly working. I have turn off my phone, signed off my wifi, installed a new app, but nothing is working. My friend is having similar issues. My phone is up to date. I even tried taking off the wifi in hopes that it could just connect to the 3g but nothing. Not sure if anyone else is experiencieng this issue or knows what I can do. I think that it may be an app problem that needs fixed, but not sure. Help!

Maybe its a Viber problem. As that is not an Apple product, why don't you try and contact the developer?

Good evening I would please help me, IGood evening I would please help me, I have problems with flash player when update on my computer Flash Player for windows 8, gives me error in the installation that is not apply on my computer. Please help. Thank You

Good evening I would please help me, IGood evening I would please help me, I have problems with flash player when update on my computer Flash Player for windows 8, gives me error in the installation that is not apply on my computer. Please help. Thank You

First, confirm that ActiveX Filtering is configured to allow Flash content:
https://forums.adobe.com/thread/867968
Internet Explorer 11 introduces a number of changes both to how the browser identifies itself to remote web servers, and to how it processes JavaScript intended to target behaviors specific to Internet Explorer. Unfortunately, this means that content on some sites will be broken until the content provider changes their site to conform to the new development approach required by modern versions of IE.
You can try to work around these issues by using Compatibility View:
http://windows.microsoft.com/en-us/internet-explorer/use-compatibility-view#ie=ie-11
If that is too inconvenient, using Google Chrome may be a preferable alternative.

IPad 3 with iOS 6 fails to connect to WiFi with WPA2 and AES - any solutions available?

Hello *,
after upgrading my iPad 3 to iOS 6 it constantly fails to connect to WiFi with WPA2 and AES - hidden or broadcasted SSID - at home and at work because the device does not accept the WPA2 password. This is also the case for my iPhone 4S but both devices did work with WiFi (WPA2 / AES) perfectly with previously installed iOS 5.1.1.
I tried to downgrade to iOS 5.1.1 but it seems to be no longer possible to downgrade for both iPad 3 and iPhone 4S as the certification and signage window for iOS 5.1.1 maybe has been closed by Apple.
Does anyone know about a possible solution to connect to WiFi with WPA2 and AES with iPad 3 / iPhone 4S and iOS 6 upgrade?
Thank you very much for any help and advise.
Best regards from Germany
Matthias

Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

I have an ipod touch 4g. I did not have wifi for three days and when I came home my friends said they texted me when i didnt have signal. The messages i received when i did not have signal are not showing up. Can someone please help me?

I have an ipod touch 4g. I did not have wifi for three days and when I came home my friends said they texted me when i didnt have signal. The messages i received when i did not have signal are not showing up. Can someone please help me?

You said "The messages i received when i did not have signal are not showing up."
How do you know received them?
If the sender got a message that the Messagers were not delivered than they were never delivered and the only way for you to get them is for the sender to resent them

How do you record video with usb mic and have the audio from garageband be the sound when recording and not just your normal voice but garage band effects for youtube?

How do you record video with usb mic and have the audio form garageband be apart of the video when recording, meaning the audio from garageband and echo and not just your normal voice for youtube post?its not add the garageband audio its just normal voice from mic no effects is going thru?

Hi Life93,
What you describe would be possible by recording your video, then removing the audio from it and adding audio from GarageBand once the video is in iMovie (I presume here that you are using iMovie for your video production. Other applications may need different methods.)
See this thread on how to remove the audio from a clip in iMovie -
Is there a way to separate audio from a video c...
https://discussions.apple.com/thread/1779767
To add audio from GarageBand use this article -
iMovie '11: Add a sound clip to your project
http://support.apple.com/kb/PH2255
Thanks for using Apple Support Communities.
Best,
Brett L

Hello, we have both Creative Cloud and Creative Cloud for teams. Can you help me with the difference and if i need to have both?

Hello, we have both Creative Cloud membership and Creative Cloud for team. Can you help me with the difference and if i need to have both? We have 9 employees that are using it. Just not sure if i'm paying for something i don't need.
Thank you

Please refer to Creative Cloud Help | Creative Cloud / Common Questions
CC is for retail use with 20 GB of storage space, CCT is where number of seats are purchased & assigned by one program admin where each seat gets 100GB of storage space.
You can not have both the CC & team in one account as it will only provide you added storage space of 120 GB but you can activate the CC any of them or either of them twice as CC is based on Adobe ID.
Regards
Rajshree

Trying to open old iPhoto library on osx 10.9.5 with iPhoto 9.5.1. iPhoto says I must upgrade but upgrade eventually hangs. Tried to rebuild/repair database but it always says you have to upgrade database first and eventually hangs

Trying to open old iPhoto library on osx 10.9.5 with iPhoto 9.5.1. iPhoto says I must upgrade but upgrade eventually hangs. Tried to rebuild/repair database but it always says you have to upgrade database first and eventually hangs

What version was the old library made with?
What is the exact message? when it hangs does it crash or do you have to force quit?
LN

I upgraded my new iPad (iPad 3) to IOS 6 and everything went well except Siri won't launch apps. When asked say "launch Facebook" Siri responds with "it doesn't look like you have an app named Facebook" and I get the same results when trying to launch any

I upgraded my new iPad (iPad 3) to IOS 6 and everything went well except Siri won’t launch apps. When asked say “launch Facebook” Siri responds with “it doesn’t look like you have an app named Facebook” and I get the same results when trying to launch any app. Siri works for everything else it just won’t launch apps. Any ideas? Thanks.

I have this same problem... Seems like nobody else does. Siri won't launch any apps for me, including native apps.

What do i do my ipod is a white screen when i try to turn it on and part of the image of my back ground pops up. I dont know what to do. Please comment if you have something that can help. Its a gen four.

when i try to turn on my gen four ipod, a white screen appears. Parts of my back ground pop up.All this started to happen when i dropped my ipod when i took it out of the case. Please comment if you have something that can help me. thanks

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

Sir you have replied for my question, and i updated my software and all those things, yet it is showing unable to connect network, but i can use internet by sim, is it the problem related with hardware? can you tell me a solution for it?

sir you have replied for my question, and i updated my software and all those things, yet it is showing unable to connect network, but i can use internet by sim, is it the problem related with hardware? can you tell me a solution for it?

you seem to be referring to an ongoing issue
click here to respsond -> sir help me to enable my network connection, my iphone 4s is not connecting with any wireless connection, what i should do for enabling network connection?
CCC

I am using iPhoto 11 and my library has 736.5mb on disk. I have problems with iPhoto stalling and needing to force quit. I have rebuilt my library. Can you suggest anything else?

I am using iPhoto 11 and my library has 736.5mb on disk. I have problems with iPhoto stalling and needing to force quit. I have rebuilt my library. Can you suggest anything else? Thanks, Rose

Make a temporary, backup copy (if you don't already have a backup copy) of the library and try the following:
1 - delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your
User/Home()/Library/ Preferences folder.
2 - delete iPhoto's cache file, Cache.db, that is located in your
User/Home()/Library/Caches/com.apple.iPhoto folder.
Click to view full size
3 - launch iPhoto and try again.
NOTE: If you're moved your library from its default location in your Home/Pictures folder you will have to point iPhoto to its new location when you next open iPhoto by holding down the Option key when launching iPhoto. You'll also have to reset the iPhoto's various preferences.
NOTE 2: In Lion and Mountain Lion the Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and hit the Enter button - 10.7: Un-hide the User Library folder.
If that does'nt help log into another user account on your Mac and try iPhoto from there.

What to do when you have internet connection but go to use an app, you get the Error message, 'An error occurred connecting to the server. Please make sure you have an internet connection' ?

Yesterday, I downloaded the twoignite app. When I went to open the app to use, this error message appeared: An error occurred connecting to the server. Please make sure you have an internet connection. I checked my connection and found I had a solid connection. I have tried closing the app and reopening it; deleting the app and redownloading it (more than once); turning off my iphone and turning it back on. None of these things have worked. Thanks.

Have you already seen this:
http://forums.adobe.com/message/5099439#5099439
Maybe you could also try asking in the kuler forum.

Please post if you have WiFi with WPA2-PSK and WEP working on iPod ios4

Similar Messages

Maybe you are looking for