Please post your root's .bashrc and .bash_profile. Mine is gone :-)

Hi,
Can someone post their stock .bashrc and .bash_profile files for the root user. I overwrote mine when messing around with the prompt.

stock .bashrc wrote:
# Check for an interactive session
[ -z "$PS1" ] && return
alias ls='ls --color=auto'
PS1='[\u@\h \W]\$ '
stock .bash_profile wrote:. $HOME/.bashrc
If you want mine, I'm pretty sure they're on my github.
@jelly: Hey buddy... might wanna check your links. dotfiles has been offline for a while now.

Similar Messages

  • E65 Microphone volume. Please post your opinion.

    I have bought an E65, but I have a question.
    When I call every peoples say me they listen me very low, (then my old phone 6630), I have try with three models of headset with cable, and without headset.
    I have try to record my voice and It's true! The microphone volume it's very low then the old 6630!
    This is normal? Is a problem or my phone or what? Exist the possibility to boost microphone?
    Please post your opinion.

    Hi,
    first thing I noticed when i started making calls with my e65, a little scale is shown on the top left of the display for the conversation volume and you can adjust it with the cursor keys (left/right) during phone calls. The factory setting was in the middle of the scale and sounded pretty low, so I cranked it up immediately to top volume, after which I've always heard and been heard loud and clear. I don't know whether you already noticed that, because this setting appears only DURING active phone calls, so you might wanna give it a try...
    Greetings, Ben

  • K8n neo2-f nf3 ultra board - onboard nic problem? Please post your experiences

    I just ordered the k8n neo2-f nf3 ultra board, with a venice 3500+ chip, from newegg.  I saw various posts on the mobo, however, from people who said the onboard nic doesn't work right out of the box, that they had to go in and manually enter the mac address in Windows that they retrieved from a sticker on the parallel port.
    I can deal with a problem like that easily, but I find it hard to believe MSI would ship such a defective board design as that.  Is this really the commonplace experience with this board?  Please post your experience with this board if you've used it or had experience with it

    Quote from: Scubahard on 15-September-05, 13:22:52
    Okay I typed my address under the "network addapters" and I still do not have any internet access.  I even tried to reboot...and nothing.  My computer knows when I have a cable hooked up to the port.  It will tell me "network cable connected" or "network cable unplugged."  I hooked up my netgear network card and I was able to get online. 
    Should I be messing with the "authentication" tab and/or the IEEE 802.1x setting?
    My windows 2k computer has a broadcast "node type" while me K*N Neo2 board does not have a line for node type (under ipconfig).  Also my XP computer does not have a line that will tell me the values for: DHCP Server and DNS Servers.  It also has a no value for the default gateway line.  It DOES have a value for the "Connection Specific DNS Suffix".  It is for comcast. 
    I hope all this is not too confusing.  I was trying to list all the questionable settings.  What should I try next? 
    Thanks!
    Well, if you're wondering about the 'dhcp server', 'dns servers', 'default gateway', etc., that is all in the 'Network Connections' folder which can be reached from the Control Panel.  To get to those settings, you right-click on the 'local area connection' that corresponds to the onboard lan, and click 'properties'.  Then, select 'network protocol(tcp/ip)' in the list of networking components and click the 'properties' button.  That will bring up the set of tabs where you can set those properties (although there is no 'dhcp server' address setting, just the option to either specify an address or use dhcp to automatically assign an address).
    I get the impression, though, that you're saying if you slap in a pci network card, it connects right away, so I doubt any of those settings are needed (unless you left out the part about going into the tcp/ip settings for the pci nic and specifying an address, etc., which I doubt you did).  Have you considered contacting msi tech support on the problem?  If it's a new board, I'm sure you're entitled to free tech support.  It seems like, with all of the chatter on these boards over this issue, they should be well aware of it and be familiar with the ways to 'fix' it.

  • MSI Neo2 users, cpu temperature!!!, please post yours!!!

    Hi Guys
    for the MSI Neo2 865PE users,i want to know, what is your guys cpu temperature while your computer is idle and stressed/underload.
    my rig:
    MSI Neo2-S (bios ver.1.0) P4 2.4C @stock speed with stock heatsink fan
    ATI Radeon 9500 Pro (not oc'ed)
    80 GB WD and 60 GB Seagate HDD
    Antec 1080 AMG with 430Watt psu
    4 fan running = 2 intake 2 blow out
    Sound Blaster Audigy
    1x512 MB Ram Kingston
    and,
    i'm using pcalert4, and it shows:
    CPU idle=45 Celcius
    CPU when playing games=60 Celcius
    System Temperature = 29-32 Celcius
    please post yours, please... because, i think it is too hot for p4 to have that kind of temperature.
    thank guys!!!

    Quote
    I am wondering how accurate the sensors are on these boards.
    I don't think MSI (nor any other manufacturer) has a step to calibrate the temperature sensors, so the answer is - not much  
    They are just relative temp readings, and probably vary from board to board.
    Quote
    system temp. Board readings are from 39c to 43c but the air temp coming out the back 120mm fan is 31c to 33c.
    Air cooling is achieved by transferring heat from hotter components to the cooler air. This will raise the temperature of the exhaust, but never higher than your hottest component. It actually depends where the sensor is located. If you put a card on the PCI slot above the Winbond chip, you would probably observe higher SYS temperatures.

  • Premiere cc 2014 crash with message "Adobe Premiere Pro could not find any capable video play modules. Please update your video display drivers and start again."

    I updated to Premiere Pro CC 2014, all the other Adobe CC 2014 software works great, but Premiere doesnt even load. The starting page (frame) comes up - my whole computer slows down and after a minute or two it crashes completely and comes up with the message :  "Adobe Premiere Pro could not find any capable video play modules. Please update your video display drivers and start again."
    I'm running a macbook Pro 15" (2014) with 16GB RAM and 760GB SSD.
    PLEASE HELP!

    Hi Delarey,
    Please go to the following location and rename the folder to old_folder name
    User/user  library/Application Support and rename Adobe folder
    User/user library/Preferences and rename the Adobe folder
    Then go to Documents folder and Go to Adobe/Premiere pro/8.0 and rename 8.0 folder
    Make sure that you are in user library if you are not sure check the link below.
    Access hidden user library files | Mac OS 10.7 and later
    Regards,
    Vinay

  • Adobe Premiere Pro could not find any capable video play modules. Please update your video display drivers and start again.

    I have administrator rights to the computer. The drivers are up to date. But I am still getting the error message "Adobe Premiere Pro could not find any capable video play modules. Please update your video display drivers and start again"  when opening Premier Pro CS5.5. This appears to have happed after I upgraded to Mac OS 10.10.2.
    Anyone?
    Thanks

    Hi Stan.
    I had the same problem as you did though I am using Adobe CC.  I saw nobody replied to you so perhaps my eventual success on my later version may have applications to the error on your version. 
    Anyhow, I did all the suggestions found here (Error "Premiere Pro could not find any capable video play modules" | Startup )  first and updated my NVidea card to no avail.  Eventually what did the trick was this...
    After mucking about with the video card, I said "OK lets just have a go at Premiere itself." So I uninstalled Premiere CC and reinstalled it.  Now for some reason it didn't give me the latest patch but a slightly earlier version than the current one but lo and behold it was fine with the video card again.  I was able to get my friend's video imported and quickly edited but then was having some issues with exporting where it would hang up but I went into Adobe Media Encoder and exported it there without a care.  That task out of the way, I then went and made the update to the latest patch and it works perfectly fine - no video driver issues.
    So short of it is this - if you've updated your drivers, perhaps what you could try uninstalling and reinstalling Premiere.
    Let me know if this works.
    Cheers and good luck

  • You cannot signed in at this time please check your mobile network setting and try again..

    Please help me i can't login in skype...my phone is android the brand is oppo and the model is joy plus...my problem is i can't login in skype...when ever i login it's always says YOU CAN'T SIGNED IN AT THIS TIME PLEASE CHECK YOUR MOBILE NETWORK SETTING AND TRY AGAIN......please help me...somebody who can help me...please what will i do?

    Hi! We tested the issue on HTC ONE M8 device and couldn’t reproduce the issue ourselves. Did you experience the issue while you logged in the first time after installing Skype on your device? Could you please give more details about this issue – exact steps how to reproduce that, Skype version number, exact OS version, network type? You can find more details about specifics we need to know from here: http://community.skype.com/t5/Android/How-to-create-a-good-Android-issue-report/td-p/211384.

  • GT70 2OC Temps - please POST YOUR TEMPS

    Hi,
    GT70 2OC
    I have masured temps:
    Ambient temp 29o
    Idle 30 min run : CPU: 55oC VGA: 52oC
    BF3 30 min run: (FullHD - ULTRA)  CPU: 85, VGA: 75oC
    BF3 30 min run: (FullHD - ULTRA)  CPU: 80, VGA: 72oC /with new thermal greese
    Those are highest temps it reaches but they still seems a bit high.
    Are those temps normal for GT70?
    Please POST YOUR TEMPS :-)

    i provide you my temps (GT70 2OD-026FR)
    that means: I7 4700Mq // GTX780m
    All of these has been obtained with a notepal U2 cooler.
    Ambient temp: 25°C
    BF3 30 min run: (FullHD - ULTRA)  CPU: 75°C, VGA: 78°C.
    Iddle: CPU: 47°C, VGA: 49°C.

  • Please post the password for the following HP Mini 110

      Customer brought in laptop and did remember the bios password.
    We tried the suggested download win32 to submit the halt code and it did not work on xp or win7 in compatibility mode.     Can someone please post the password for the following HP Mini 110. 
        Halt code = CNU937BF2X
         thanks  Andy  Mountain Computers Inc.

    Try
    e9lofxp874
    or
    e9lofxp87r
    Wish you luck,
    Karthik
    --Say "Thanks" by clicking the Kudos (purple thumbs up icon in the lower right corner of a post)
    --Please mark the post that solves your problem as "Accepted Solution"

  • Can someone please post the password for the following HP Mini 110

      Customer brought in laptop and did remember the bios password.
    We tried the suggested download win32 to submit the halt code and it did not work on xp or win7 in compatibility mode.     Can someone please post the password for the following HP Mini 110. 
        Halt code = CNU937BF2X
    thanks  Andy  Mountain Computers Inc.

    Hi,
    Try:
    e9lofxp874
    e9lofxp87r

  • Benchmark song - please post your observations

    I am thinking of going all software. Selling most of my hardware synths. I don't know which computer to go for but I would like to be able to make all types of music and video work. Can you go thru the post below (I copied from the archived post) and post your observations? Macbook pros (C2D) are nice but can they handle orchestral work? Macpros are fast but difficult to carry around, of course. How well do the EWQLSO vsts and such play on the newest macs? How much is the delay loading samples? Hardware synths usually have no delay loading patches.
    Thanks to all of you who gave results on the first benchmark song. This one is very similar, instead of using Space Designer it uses Sculpture. Each track has 15 notes on each, so for polyphony multiply tracks by 15.
    http://noisefloor.com/logic/SculptureBenchmark.lso.zip
    Mute tracks until you are able to play the session back consistently.
    Please list:
    Your machine and speed
    Ram
    OS version
    Logic version
    sound card
    buffer setting
    My results: Quad 2.5, 4.5 gigs ram, 10.4.5, Logic 7.1.1, MOTU 828mk2, buffer 512
    39 tracks, polyphony 585, CPU use in Activity monitor maxed about 340%.

    If your looking to do orchestral mockups using samples, running a sculpture/space designer based benchmark test will not give you the answers you seek. Sculpture & space designer are both CPU based effects/instruments, where orchestral mockups are RAM based (for the most part). Of course CPU is needed to run your players (Kontakt, play, VSL VI, etc) as well as reverbs (convolution reverbs use a lot of CPU) but your actual orchestra will be streaming from RAM & Hard Disk.
    Thus macpro desktops are currently the best way to go, as you have more RAM access & multiple internal HD's. Thats not to say you cant get comparable results using a macbook pro, but seeing as how all my studio equipment is in my studio, desktop works great for me.
    I wonder if its possible to do a similar benchmark test using Logic's EXS & factory samples instead of sculpture? Of course the factory patches are much smaller than the massive instruments found in VSL/EastWest, but I'm sure someone could put one together. I'd be interested to see the results.

  • Intel vs G4/G5 - please post your results

    I'm currently running ARD 3.0 on my G5 as I was unable to get it to run reliably with my Intel MBP.
    Has anyone had luck with ARD 3 on your Intel Mac?
    If so, please post here.
    I've stopped trying to make this work as I figured it just needs some updating on Apple's side, but I'd love to know if other Intel users are having better luck?
    Thanks.
    Scott

    I sure haven't.
    It works fine on my internal network, but I mainly use it to remote support Windows client's that I have. I have them all loaded up with TightVNC, which, for the most part, had been working fine, until I upgrade my PowerBook to my MBP. Since then, I cannot connect to any remote client, aside from my internal network. Add thing is, I have changed no settings, Apple Remote Desktop came over intact from Migration Asst., but it will not connect to them. Funny enough, my PowerMac still connects with no problems whatsoever.
    I am puzzled as to what the issue could be. The only thing I can think is, something is not working between the MacBook Pro and TightVNC, but alas, no one ever seems to suggest on here a really solid Windows VNC for use with Apple Remote Desktop and furthermore, Apple does not seem too interested in creating one themselves, which is very frustrating.

  • Ten image test: Please post your specs and results!

    I have a friend with a quad and a new MacBook(not PRO) and he is reporting great numbers on my "Ten image test"
    Time the following:
    Select 10 RAW files with NO adjustments. Export jpg original size.
    Select 10 JPG files with NO adjustments. Export jpg original size(not export master)
    Report your times, what camera the RAW files are from, as well as machine specs(machine, disks, RAM, and video card(single or dual monitors)
    Results from the Macintelintosh Books(pro and 13") and iMacs would be nice also!
    Thanks!

    Camera: Canon Eos-1Ds - 11.1 Mpixel
    Conversions (export versions) to Jpeg Quality 10
    Ten Raw __ 41"
    Ten Jpeg __ 24"
    MacBook Pro 17" - 2.16 GHz - 2 Gb Ram - 7200 rpm HD - ATI X1600 256 Mb
    MacBook Pro 17"   Mac OS X (10.4.6)  

  • Please post your positive experiences with Leopard, and only positive

    In a board of people looking for help, it is important to have balance. When we see hundreds of people complaining about the software, it makes people think that Leopard is one buggy system. I can say happily it is not.
    What works:
    HP Scanjet 3970
    Epson Stylus R220
    Firewire hard drives by OWC and Cooldrives
    BBEdit 7.1.4
    Filemaker 8.5v2 (as long as web services aren't used, but you can export to HTML)
    Appleworks 6.2.9
    Sansdisk SD Card reader.
    Elgato EyeTV 200
    Time Machine
    iPhoto 6.0.4
    iTunes 7.5 and Quicktime 7.3 Pro
    Google Earth
    AppleTV
    802.11n Airport base station with 10/100 Ethernet.
    All on an iMac Intel Core2Duo purchased December 2006.
    Note: this isn't a poll. It is to discover what constitutes technical success.
    Message was edited by: a brody

    Printers
    Brother HL-2040 both locally and networked (USB sharing over airport to a Tiger machine)
    HP laserjet 1200 series both locally and networked (see above)
    Dymo Labelwriter 400 Turbo (not the Dymo software, just the printer, drivers are native) you have to work with the settings to get it to work...Dymo is supposedly working on it.
    _*Other Hardware*_
    iPhone 8G
    ALL iPods, (at least back to a 2nd generation firewire ipod, includes a couple of 3G firewires, both shuffles, a mini, all three nanos, and the new classic - 4 kids, a wife, myself, and family ones for travel and sports)
    Airport Extreme (the white spaceship one with 802.11b/g)
    Kensington 3 button scroll wheel PocketPro mouse (although I prefer Apple's new mighty mouse)
    Lacie d2 harddrives
    Lacie DVR
    Software
    MS Office v.X (just have to disable the Trial MS Office 2004 stuff first)
    FileMaker Pro 6 (Yes that's FMP 6 and not 9, I don't use/need the web features, so that is ?)*
    *What I would like to mention, is that this is business critical software, and we use about a dozen heavily relational custom databases, for everything from client management, form generation, timekeeping/billing etc. Not only is it heavily Relational and interrelated to other apps, it also relies heavily on both internal (FMPs own) and external (AppleScript and Terminal) scripting, some of it very sophisticated. I was very concerned about portability to the new system, and maintained dual information on existing equipment. We have had ZERO issues, so far.
    Quicken 2003 (I don't use the online stuff at all, so that is ?)
    Appleworks 6 (still used for legacy documents that have yet to be ported over to Word)
    Network
    Very well with G3 iMacs and a PBG4 all running Tiger
    (all on the new aluminum iMac Intel Core 2 Duos running 10.5.1)
    Message was edited by: Zac.

  • Linux vs. linux-ck power usage - laptop users please post your results

    Krum reported are rather significant increase in power consumption when using the linux-ck kernel vs. the linux (stock ARCH) kernel.
    krum wrote:With the last ck i7-avx, I jump from 10W (stock arch) to 15W on my laptop with the same kernel options and same usage.
    I will investigate further another time...
    I began to wonder just how universal this was so I tested on my own laptop (Intel T9400 @ 2.53 GHz, NVidia FX, 2x2 GB, SSD and 17" screen) booted into three different kernels, ARCH, ck-generic, and ck-core2 with the latter two downloaded from my unofficial repo.  I took two readings per kernel.  The first was measured with powertop on battery after letting it settle for a good 3 min of idle.  The second was with the battery removed and on AC power measured with a Kill-A-Watt.  My results indicate no significant differences.
    linux-3.0.3-1
    Powertop: 37.5
    Kitt-A-Watt: 41
    linux-ck-3.0.3-4
    Powertop: 38.6
    Kitt-A-Watt: 41
    linux-ck-core2-3.0.3-4
    Powertop: 37.5
    Kitt-A-Watt: 40
    Can others running both kernels do a similar analysis with powertop and post the results here?

    Hi,
    I did my test with powertop.
    I got also higher temp:
    [root@akira david]# uname -a && uptime && fan
    Linux akira 3.0-ck #1 SMP PREEMPT Sun Aug 21 05:31:12 EDT 2011 x86_64 Intel(R) Core(TM) i7-2620M CPU @ 2.70GHz GenuineIntel GNU/Linux
    22:20:24 up 10:26,  4 users,  load average: 0.00, 0.03, 0.07
    speed:        2616
    level:        auto
    Core 0:         +47.0°C 
    Core 1:         +42.0°C
    [root@akira david]# uname -a && uptime && fan
    Linux akira 3.0-ARCH #1 SMP PREEMPT Wed Aug 17 21:55:57 CEST 2011 x86_64 Intel(R) Core(TM) i7-2620M CPU @ 2.70GHz GenuineIntel GNU/Linux
    22:22:52 up 2 min,  4 users,  load average: 0.28, 0.19, 0.08
    speed:        2630
    level:        auto
    Core 0:         +39.0°C 
    Core 1:         +38.0°C
    EDIT:
    [root@akira david]# uname -a && uptime && fan
    Linux akira 3.0-ck #1 SMP PREEMPT Sun Aug 21 05:31:12 EDT 2011 x86_64 Intel(R) Core(TM) i7-2620M CPU @ 2.70GHz GenuineIntel GNU/Linux
    22:29:41 up 2 min,  4 users,  load average: 0.18, 0.24, 0.10
    speed:        2644
    level:        auto
    Core 0:         +40.0°C 
    Core 1:         +35.0°C
    My bad, I forget to had these kernel boot option: pcie_aspm=force i915.i915_enable_rc6=1 i915.i915_enable_fbc=1 i915.lvds_downclock=1
    So it seems to be OK, I will do new powertop test when my battery will be full.
    Last edited by krum (2011-08-28 21:11:47)

Maybe you are looking for