Please provide Solution for Customer Condition Group when defining 2 Chrt's

Dear Guru's,
Please provide Solution for Customer Condition Group when defining 2 Charecters or 2 digits.
I have Completed all possible Combinations like AA,BA,1A,A1,01 to 99 etc.. Total Enteries reach upto 1200+ so I am unble to find no more Combinations( without Special Characters & no chance to increase other than 2 Char/digt)..
Any body Suggest me any Good Combinations or Proper Alternative....
Thanks,
Panduranga

Hi panduranga
A Customer Condition Group is maintained in only 2 digits .If you want to go for more than 2 digits then you need to take the help of ABAP'er and you need to go for enhancement
Regards
Srinath

Similar Messages

Please provide solution for filter

hi everyone
I'm new to SAP
can anyone please help me in solving the issue of filter
i have tried the method in
http://www.scribd.com/doc/29086467/WDA-Table-UI-Element-Filter
and created a attribute gt_expenseset of type zhr_emp_reimp_ex(my table)
and
supply function by name supply_expenseset
the code in supply_expenseset is
method supply_expenseset .
* data declaration
data:
 itab_expenseset type if_componentcontroller=>elements_expenseset,
 stru_expenseset like line of itab_expenseset.
* @TODO compute values
* e.g. call a data providing FuBa
select * from zhr_emp_reimp_ex into corresponding fields of table itab_expenseset.
* bind all the elements
node->bind_table(
 new_items = itab_expenseset
 set_initial_elements = abap_true ).
wd_this->gt_expenseset = stru_expenseset.
endmethod.
and i have written the code in the event handler filter
method onactionfilter .
* wd_this->table_control->apply_filter( ).
 DATA node_expenseset1 TYPE REF TO if_wd_context_node.
 data elem_expenseset1 TYPE REF TO if_wd_context_element.
 data stru_expenseset1 TYPE wd_this->element_expenseset1 .
 data itab_expenseset type wd_this->elements_expenseset.
* navigate from <CONTEXT> to <EXPENSESET1> via lead selection
node_expenseset1 = wd_context->get_child_node( name = wd_this->wdctx_expenseset1 ).
* get element via lead selection
elem_expenseset1 = node_expenseset1->get_element( ).
IF elem_expenseset1 is INITIAL.
return.
ENDIF.
* get all declared attributes
elem_expenseset1->get_static_attributes(
 IMPORTING
 static_attributes = stru_expenseset1 ).
DATA:
 node_expenseset TYPE REF TO if_wd_context_node,
 elem_expenseset TYPE REF TO if_wd_context_element,
 stru_expenseset TYPE wd_this->element_expenseset .
*copy values
itab_expenseset = wd_comp_controller->gt_expenseset.
*if filter is defined for expense_set
IF not stru_expenseset1-expense_set is initial.
delete itab_expenseset where expense_set NP stru_expenseset1-expense_set.
ENDIF.
* navigate from <CONTEXT> to <EXPENSESET> via lead selection
node_expenseset = wd_context->get_child_node( name = wd_this->wdctx_expenseset ).
node_expenseset->bind_table( itab_expenseset ).
endmethod.
but the error im getting is itab-expenset cannot be converted to me->expenseset
can any one help me please
thanks & Regards
Madhu

Hi panduranga
A Customer Condition Group is maintained in only 2 digits .If you want to go for more than 2 digits then you need to take the help of ABAP'er and you need to go for enhancement
Regards
Srinath

I installed opera Mini Web browser 6.0.1. When open the application only blank page coming. Please provide solution. Kind Regards Nias Ahamed

I installed opera Mini Web browser 6.0.1. When open the application only blank page coming. Please provide solution. Kind Regards Nias Ahamed

If you have an internet connection (e.g., Safari works) try here:
iOS: Troubleshooting applications purchased from the App Store

HT201406 my ipad touch screen is not working please give solution for it.

my ipad touch screen is not working please give solution for it.
i have connected ipad to itunes and done it restore seetings then also my touch is not working but
when i connected ipad to i tunes inside functions are working properly but touch screen is not working what can i do

If you have a screen protector on the iPad's screen, try removing it. If you don't or that doesn't help, and restoring the iPad to factory settings has not corrected the problem, then the iPad probably has a hardware problem and will need to be taken or sent to Apple for replacement.
Regards.

I am having Samsung GT-S8530 Its BADA Operating System please provide Firefox for this

The Mobile handset Samsung Wave 2 GT-S8530 Model works on BADA OS developed by Samsung. Kindly provide browser with Flash support for this OS. I love using firefox as its a secured browser please provide solution immediately

Answered at https://support.mozilla.com/en-US/questions/789084

Would you please provide Snote for BI7.0 SP09(BI 7.0 Support Stack 09)

Hi,
Would you please provide Snote for BI7.0 SP09(BI 7.0 Support Stack 09).
What would be the pro and cons if i would go for BI 7.0 SP09
Is there any issue with data loads and BEx queries if we go for BI 7.0 SP09.
For one week we will go for BI7.0 SP09(BI 7.0 Support Stack 09) and later we would go for BI 7.0 SP15.
Please some can advise me on this
Edited by: Krish b on Jun 16, 2008 9:15 PM

1. Data flows do not need to be migrated into the 7.x fashion specifically but it is advisable.
2. no idea
3. Old Authorization concept of the BW 3.X is not longer supported. Before 7.3 upgrade you have to migrated to new concept.

Customer condition group 1 - 5 on VF02/VF03???

Hi folks
In the invoice position table - VBRP - we have the Customer condition group fields (1-5) But unfortunally I can't see them in the trabnsaction VF02/VF03!
How or what to do?
Best regards
Carsten

Hi
At item level, you have see the additional data of the reference sales order at the item level.. You can see that in Additional Data1 of the item.
Reward if this helps.

Hi..I m using iphone 5s...i have set password in phone...i came to know that if you click on home button twice rapidly it gets unlock...IOS 8.1...please provide solution on it....

hi..I m using iphone 5s...i have set password in phone...i came to know that if you click on home button twice rapidly it gets unlock...IOS 8.1...please provide solution on it....

I suggest that you run software update, after which you should have Safari 6.0.5 - then check Safari - Preferences - Privacy & see that 'Block cookies' is not set to Always.
Failing that - switch Safari extensions Off via Safari - Preferences - Extensions & test again

SAP buffer for Customer Account Group (number range skipping)

Dear Experts,
When creating new customer for Account Grp = TRDL for my company, I find out that the number range always skip and this problem continues. Someone told me to check it out if the problem might comes from buffer. In Tcode = SNRO (Object = DEBITOR) I find out that buffer setting = 5.
The Question is how can I check if this buffer rate is compatible with my SAP environment? or which rate is more compatible and help solve the problem of number range skipping?
If anybody have some suggestion please feel free to contribute it.
Thank you very much

Hi,
in SNRO, take out the flag for
"Main memory buffering".
SAP recommends:
Dependencies
When buffering number intervals, gaps may result in number assignment. Buffering is therefore not possible for applications, which require continuous number assignment.
What happens is that the system loads consecutive numbers into the buffer, in your case these are five consecutive numbers. When you create customers and do not use all the numbers already in the buffer, the numbers remain open. Example: You start XK01 for customer creation, create three customers and then logoff. You have two open numbers remaining. Numerical example: 1, 2, 3 have been used, 4 and 5 have been reserved, but are open.
When invoking XK01 again after subsequent log-on, the system pulls the next five numbers into the buffer. Since 1,2,3,4,5 were already taken (for the previous buffer), the next buffer goes from 6 to 10.
Numbers 4 and 5 will never be used, the practical consequence of that are the number gaps that you have noticed.
Hope this helps.
Rudolf

Change from Internal to External Number range for customer account group

Hi,
We would like to change the number range assignment for a customer account group from internal to external. The external number range assignment check box is greyed out as a few numbers in the range have already been used up. We want to do the internal to external assignemnt change, create a customer of a specific number, and revert the range back to internal assignment. Is this possible?
Appreciate your help.
Ram

Hi,
Please do the below steps:-
(1) Go to XDN1 and click on "Maintain status" button. Note down the current status and change the status to zero. Save.
(2) Again go to SDN1 and click on "Maintain No. Range" button, and change the no. range to external. Save. (if that number range is maintained for multiple years, then make it external for the first yer and for the subsequent years, it will become automatically.)
(3) Then create your customer with specific number.
(4) Then go to XDN1 and click on "Maintain No. Range" button, and change the no. range to internal. Save. (if that number range is maintained for multiple years, then make it internal for the first yer and for the subsequent years, it will become automatically.)
(5) Again go to XDN1 and click on "Maintain status" button. Maintain the current status as the number noted down in step (1) above. Save. (In case number created in step (4) is greater than the number notes in step (1), maintain the number of step (4) in current status.)
Regards,
Gaurav

What should i take for customer account group

wat is the best to customize customer account group
i m thginking to creat one exportcustomer and other one is domestic
or else i ll make one one as sold to party
plz help

Customer Master
Account Group
Maintain Number Range for Account Group
Use
The purpose of this activity is to control number range of Account Group.
Procedure
 Access the activity using one of the following navigation options:
IMG --> Financial Accounting (New)  Accounts Receivable and Accounts Payable  Customer Accounts  Master Data  Preparations for Creating Customer Master Data  Create Number Ranges for Customer Accounts  Select the Icon to maintain Number Range
Transaction Code SPRO
Data to be maintained:
No | From | To | Current No | Ext (Tick in Check Box)
01 | 0000000001 | 0000099999 | 0 | No
02 | 0000100000 | 0000299999 | 0 | No
XX | A | ZZZZZZZZZZ | Yes
Assign Number Range to Account Group
Use
The purpose of this activity is to maintain number range of Account Group.
Procedure
 Access the activity using one of the following navigation options:
IMG --> Financial Accounting (New)  Accounts Receivable and Accounts Payable  Customer Accounts  Master Data  Preparations for Creating Customer Master Data  Assign Number Ranges to Customer Account Groups
Transaction Code SPRO
 Data to be maintained:
Group | Name | Number Range
0001 | Sold-to party | XX
0002 | Goods recipient | XX
0003 | Payer | XX
0004 | Bill-to party | XX
Define Account Groups with Screen Layout (Customers)
Use
In this step, you determine the account group of the customer.
Procedure
Access the activity using one of the following navigation options:
IMG --> Financial Accounting (New)  Accounts Receivable and Accounts Payable  Customer Accounts  Master Data  Preparations for Creating Customer Master Data  Define Account Groups with Screen Layout (Customers)
Transaction Code SPRO
The groups indicated below are a few examples. There are many groups in Standard SAP & if we require additional Group, it can be copied from appropriate group & maintained.
Group | Name
0001 | Sold-to party
0002 | Goods recipient
0003 | Payer
0004 | Bill-to party
0005 | Prospective customer
0006 | Competitor
Select Sold-to-party  go to Details  Double Click on General data / Company code data / Sales data. It will take to next screen which details Tab Pages of General data / Company code data / Sales data. Double Click on Tab Page for example: Address, Control, Marketing & so on. Here you can maintain whether the field is to be Suppress, Req. Entry, Opt. entry or Display
Regards,
Rajesh Banka
Reward points if helpful

SAP Solution for customer crosscheck

Hi.
For security reasons one of our customers wants to crosscheck customers with an external database located in Switzerland. Does someone have an idea whether or not SAP has a standard solution for this?
Basically it entails reading the customer details from sales order/inquiry, blocking the order/inquiry while sending the details to an external database, receiving the reply and whether good or bad then releasing/discarding aforementioned order/inquiry.
Sincerely
Ryan

NA

Please provide mibs for CGNE-c29tor001 and CGNE-c55tor001 switches

We require SNMP mibs for the following hardware.
CGNE-c29tor001
CGNE-c55tor001
Can you please provide us ?

Usually the MIBs are as per the supported IOS or Software running on the device. You can check the software running on the device using show version and check the supporting MIBs on those softwares here :
http://tools.cisco.com/ITDIT/MIBS/MainServlet?ReleaseSel=0&PlatformSel=0&fsSel=0
-Thanks
Vinod
**Encourage Contributors. RATE Them**

Ios7 drains out mobile battery very quickly, please provide solution

ios7 drains out mobile battery very quickly, please provide solution

After doing the suggest post above. Make sure ALL setttings on the device such as wifi bluetooth and even fetching email times and all the other battery hogs.. if the issue is still there.. back up and restore the device

Could anybody pls provide the solution for test condition for ceating deliv

Hi,
I am working one function module but I want some functional input (SD).
1. Create a domestic delivery.
2. Create ICB direct to customer delivery.
3. Create ICB PO replenishment delivery
4. Create ICB Atlas to Non Atlas.
5. Repeat the steps for gateout enabled and not enabled locations and perform billing. Check the billing log.
6. Repeat the tests with delivery with and without gateout info.
7. Create a POD adjustment document for over delivery scenario. Perform billing.
8. Perform billing using VF01 and VF04
So anbody can help me for functional input.
Waiting for quick response.
Best Regards,
BDP

Hi Reneta
For your requirement , Bonus Buy concept should be used. But the best way to meet your requirement is to go with a
new subroutine and assign to the discount condition type in your pricing procedure.But if there are several combination's of materials which can vary the reduction of the price then in the subroutine only you have to write the subroutine with the help of ABAPer that if any vary comes then system should check the prices and vary the prices also. So give your requirement to the ABAPer then he will fulfill your requirement.
Regards
Srinath

Please provide Solution for Customer Condition Group when defining 2 Chrt's

Similar Messages

Maybe you are looking for