Please provide the Message type ,IDOC TYPE , PROCESS CODE for Edi 990 ,214

Hi friends,
Please provide the Message type ,IDOC TYPE , PROCESS CODE for Edi 990 (Response to a Load Tender)., 214 (Shipment Status )
For shipement status i got trxstc01 for idoc type .. but its only before 4.6 version ..for 4.7 its not there .. please give the alternate for that ...
Thanks in Advance ....
If any one is provide exact answer i will give Max marks ..
Edited by: ajay KOLLA on Aug 6, 2009 8:04 AM

Hi,
Have you resolved this issue. If yes, can you please let me know. Im actually looking for same for EDI 867 (guess it is for summary report and need to know message type, Idoc type associated with this).
Rgds
Sudhanshu

Similar Messages

  • Message type ,IDOC TYPE , PROCESS CODE for Edi 990

    Hi ,
    Please provide the Message type ,IDOC TYPE , PROCESS CODE for Edi 990 (Response to a Load Tender).
    Thanks in Advance.
    Ajay Kolla

    Hi
    Pls check the below links
    1. http://www.erpgenie.com/sap/sapedi/ansi.htm
    2. http://www.erpgenie.com/sap-technical/ale-edi-b2b/master-data-message-types-idoc-types
    Hope this may helps you.
    Regards
    Sirigiri

  • Idoc type, message type and process code for EDI 940 & 945

    Hi,
    We are implementing a scenario wherein we are required to send a Wharehouse Shipping Order to the warehouse (forwarding agent) using EDI 940. The output of the o/b is triggered from the Delivery (VA01) after creation of a Delivery in SAP. Once the warehouse ships the goods, it notifies us back by sending EDI 945 (Warehouse Shipping Advice). Using this inbound 945 we are required to update the existing delivery in SAP, i.e., it should do the Pick, Pack and PGI.
    Can someone tell me which Idoc type, Message Type and Process code should be used for the above scenario.
    Thanks in advance for the help.
    Regards,
    Gajendra

    Hi Gajendra,
    For EDI940, you can use message type SHPORD or WHSORD,  IDOC type DELVRY01 and process code DELV.
    For EDI945, you can use message type SHPCON or WHSCON,  IDoc type DELVRY01 and process code DELV.
    Hope this will help.
    Regards,
    Ferry Lianto
    Please reward points if helpful.

  • Attachment of mesasge type to a process code..

    Hi..
    When I am trying to attach a message type to a process code , for outbound it is allowing me to do so but for inbound it is not allowing me.
    So can anyone please tell me where is the problem?
    Thanks

    Hi Subhash,
    Please ensure you have setup ALE Attributes (BD51) then  message/application object (WE57) prior to setup process code (WE42). Otherwise you may not able to setup/assign your function module.
    Also find below link which will show you step by step on how to configure inbound IDoc processing.
    http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
    Hope this will help.
    Regards,
    Ferry Lianto

  • Required Outbound Process Code for MessageType LOIPRO (Basic type-LOIPRO01)

    Hi EDI Gurus,
    I need to know the outbound Process Code for MessageType LOIPRO (Basic type-LOIPRO01).

    Hi,
    there is no process code for MessageType LOIPRO .
    check the below link u will get the clear idea.
    Re: Process Code for Outbound Production Order??
    Reward if helpful.
    Regards,
    Nagaraj

  • Doubt in IDOC's - Process Codes

    Hi,
    Currently i am working on an object related to IDOC generation. This is my first object in IDOC's. I am doing it from the scratch including creation of segments, IDOC type, message type, process codes...
    In this process, I am developing a function module that should be assigned to the process code. My doubt here is, is there any standard interface to the function module that we have  to assign to the process code?
    I am also giving the flow which i will be using in developing the Function module. Please go through it and kindly let me know if I am doing it in the right way or not?
    1. Extract data from data base based on the entry in NAST
    2. Filling IDOC DATA & Control records
    3. Calling the FM MASTER_IDOC_DISTRIBUTE to generate the IDOC
    Please suggest me whether i am doing it in the correct way or not?
    Thanks in Advance,
    Best Regards,
    Phani

    Hi,
    For outbound u need to attach ur FM to the process code in WE41 tcode..I think u r using message control method for ur requirement.please look at the configurations for outbound using message control method.we use we41 (outbound process code) and we use this in the message control tab in the partner profiles. 
    The transaction codes that are required for this method are
    We81
    We30
    We31
    We82
    We21
    We20
    Bd64
    Nace
    Me22n (purchase order), va02 (sales order) etc.
    Ex: purchase order.
    Message type: ORDERS
    Idoc type: ORDERS05
    Outbound process code for purchase order: me10
    Regards,
    Nagaraj

  • Message type, Idoc type and process code in ALE/Idoc

    Each Idoc version(creams01 or cremas03) will have seperate process codes in Inbound process?
    Whether Message type triggers the process code or the Idoctype/idoc  triggers the process code in Inbound process?
    regards
    Message was edited by: henry

    Hi Henry,
    About your question as how should you assign seperate process code for the same message type ( with different IDoc Type )-
    In We42, the message type can be assigned to the processing code. But here you will find that along with message type there are two more fields - Message Code & Message Function.
    You can use any one these to serve your purpose.
    e.g. you can assign
    -process code P1 to message type M with Message code 1
    -process code P2 to message type M with Message code 2
    Further these process types can be configured to call separate FMs.
    Now depending on IDOC types your external system should populate the message type as well as Message code so that accordingly process code will be determined at the time of inbound processing.
    I hope it's clear & correct
    Thanks,
    Ram

  • Message type and Process Code for 940 IDoc

    Hi,
    what Message type and Process Code can be used for 940 IDoc when a SHPMNT05 IDoc is being used. We are using SHPADV message, SHPM process code for ASN. Can I use the SHPMNT message type for 940?
    thanks,
    Kumar.

    should SD11 be the only process code to be used or can we use SHPM. I guess we can use both for shpmnt05. But how do I know which process code is more suitable for my purpose. is there any place where i can check that info?
    Can we link SHPORD message type to a SHPMNT05 IDoc? i think this message type is more suitable.
    thanks,
    Kumar.

  • Providing  the message types  to included for change pointers

    Hi Everyone,
       How can we Provide the message types to be included for change pointers.?
    How can we turn-on Change pointer update generally?
    Iam converting the idoc to XML format in XI , So. i need the queries to solve( understand)
    Thanks
    Manju
    P.S. Points will be rewareded

    Hi Manju,
    How can we provide the message types to be included for change pointers?
    You can use transaction BD50 to activate change pointer for a message type.
    How can we turn-on change pointer update generally?
    You can use transaction BD61 to activate change pointers generally.
    Regards,
    Ferry Lianto

  • What is the process code for Message type FUNDMA

    Hi,
    I am sending CO elements to the distributed server using ALE. Can somebody tell me what is the process code for the message type FUNDMA?
    Thanks
    William

    Check entries of table VEDI_TMSG1. This contains Message types and associated Process codes.
    Hope this helps.
    ashish

  • What is the process code for message type FIXEDASSET_CREATE?

    Hi all
    please tell me that what is the process code for
    MESSGAE TYPE = FIXEDASSEt_CREATE,
    FUNCTION MODULE = IDOC_INPUT_FIXEDASSET_CREATE,
    BASIC TYPE = FIXEDASSET_CREATE01 ?
    thanx in advance.......
    Edited by: Prachi Sharma on Jan 11, 2008 7:45 AM
    Edited by: Prachi Sharma on Jan 11, 2008 8:03 AM

    Hi,
    Check the Tcodes WE41 and WE42 for Outbound and Inbound process codes
    Check below Tables as well
    EDE1T
    EDE2T
    EDE5T
    EDE6T
    TEDE5
    TEDE6
    Regards,
    Satish

  • Inbound Idoc Type / Message Type / Process Code for Delivery via Tcode VL0N

    Guys,
      I need to to Idoc Type and Message type for to create Delivery ( Tcode VL01N ) for a sales order.
      I tried Idoc Type DELVRY03 and Message Type DESADV, but this is for Purchase Order  ( VL31N ).
    Kindly help me.
    Regards
    Srikanth M

    Guys
    I could not use above message type/idoc type as they are not released in SAP.
      So i am again back to where i have come from. I am trying to use DESADV01 and Mess Type DESADV.
    Regards
    Srikanth M

  • Process Code for Message Type LOIPRO(in ALE/IDOCS)

    Hi all,
            I have to implement Production order Interface(create Production order,change Production order etc).The requirement is for eg:,I created one production order and posted it;it should get reflected in the recieving system.Does anyone know the process code for LOIPRO.I checked it in we42,WE64 and even the tables TEDE1 and TEDE2.But its not available.Process code and function module is necessary to continue with WE20.
    Thanking you in advance,
    anjaly

    Hi
    it may sound like not good news, but I think the answer is described in OSS Note 198252 - Special features of POI message category LOI*.
    There all LOI* idocs are mentioned and then they say:
    The message categories named are part of the POI (Production Optimization interface) interface.This interface and the message categories contained in it were developed for the transfer to non-R/3 systems.Therefore, an inbound processing in the R/3 system is not planned.The message categories are transferred via separate transactions / reports of the POI interface (Transactions POIM, POIT).Functions which exceed these transactions are not supported.For this reason, the above-mentioned ALE functions cannot be used for the message categories described.
    So, in short, there is no inbound process code for LOIPRO.
    Inbound processing then should be done through self-developed programs / idocs, calling BAPI-s (for example).
    Regards,
    Joe
    Edited by: Joseph Yasman on Jun 30, 2009 1:46 PM

  • IDod Type,Message Type,Inbound Function,Process Code Required

    Dear All,
    I require
    1. IDoc Type
    2. Message Type
    3. Inbound Function
    4. Process Code
    for
    a. Vendor Master Creation,Updation,Deletion
    b. Customer Master Creation,Updation,Deletion
    c. Vendor Invoice(TCode-FB60) Creation,Updation,Creation
    d. Vendor Credit Memo(Tcode-FB65) Creation,Updation,Creation
    e. Customer Invoice(TCode-FB70) Creation,Updation,Creation
    f. Customer Credit Memo(TCode-FB75) Creation,Updation,Creation
    i require to insert all the above detail into SAP from another system so please provide me the full detail.if the IDoc type is separate for Creation Updation Deletion then provide likewise.
    Everybody will rewarded.
    Thanks,
    RP

    hi
    use t code wedi and goto EDI administration menu. in that goto development menu. there you can find all items like Idoc type, message type or process code all information is available.  You can also use t code WE30,WE31,WE80,WE81, WE42 - Inbound process code and WE41 Outbound process code.
    Hope this helps.  Assign points if useful.
    Rago

  • Process code for 869(EDI ) Order Status Inquiry Message type.

    Hi Gurus,
                       Please can any one help in providing Process Code for 869 Order Status Inquiry Message type.
    Thanks,
    Sudhakar

    Hi Everybody.
    There's no standard process code for LOIPRO Outbound Idocs.
    This Idocs are threated as master data info, and could only be automatically generated by Data Distribution Model.
    BD64.
    Anyway, you can define your own Outbound Process Code in WE41 using CLOI_MASTERIDOC_CREATE_LOIPRO FM.
    You can choose.
    Regards.
    Albert.

Maybe you are looking for