Please read and answer

why doesnt apple let iphone 4 be compatable for the ios 8 update this fall?

For the the same reason iOS 8 won't support the iPhone 3GS and 3G. Because the iPhone 4 is obsolete.
Look at the models of iPhone Apple currently sell: iPhone 5s, iPhone 5c, iPhone 4s. No iPhone 4, it was dropped from the lineup when the 5s, 5c and iOS 7 were released. Hence iOS 7 was the last version that would run on the iPhone 4. The iPhone 4s replaced the iPhone 4 as the entry-level iPhone. Exactly the same thing will happen this Fall when the iPhone is released, the iPhone 4s will be dropped from the lineup because it is obsolete and iOS 8 will be the final version of iOS for that model. Presumably the iPhone 5c will then drop down to become the new entry level model, and it will be dropped the following year when iOS 9 is released.
New versions of software like iOS typically require faster processors, more RAM and other things to support the newer features, eventually it becomes impossible/uneconomic for Apple to keep older, slower hardware in the lineup so it is dropped and support for the latest OS versions on it ceases. So far this has happened on a very predictable schedule with the iPhone.

Similar Messages

Help I need urgent Help!!!!! now please read and answer!!!!

My ipod was fine until i tried to play a song it froze then went black and it wont turn on or charge.

Hello starlight2190,
And welcome to Apple Discussions!
Have you tried a simple reset of the iPod yet? To do this, toggle the hold switch on and off, then press and hold the Select (Center) and Menu buttons together until the Apple logo appears. If it doesn't work the first time keep trying.
Otherwise, if still no response, you may have to wait for the iPod's battery to fully drain. Once it has, let it charge long enough to power on and once it has, go ahead and restore it via iTunes.
B-rock

ATTENTION. PLEASE READ AND BE SAFE!

Hey everyone, iv just had a scam happen to me which by googling the name of the offender it turns out to be quite a common one. the scammer known as xxxxxxxxxxxx is now using the skype name xxxxxxx
please avoid and be safe guys. skype i hope you find this rat xxxxxxx thats threatning to ruin peoples lives.
i have blocked and reported the user i just hope the threats arent followed through with and that they just give up.

Hello and thank you for reporting this information to us. As this is a public internet site we don't permit Skype names or actual names to be posted.
TIME ZONE - US EASTERN. LOCATION - PHILADELPHIA, PA, USA.
I recommend that you always run the latest Skype version: Windows & Mac
If my advice helped to fix your issue please mark it as a solution to help others.
Please note that I generally don't respond to unsolicited Private Messages. Thank you.

Here's a challenge please read and help.......

I work for a company of a 1000 people and the owners bought everyone an ipod.
the problem is that my boss wants me to record each persons serial number to their ipod and print it out for his records.
i know that the serial number is on the back of the unit but that would take to long.
I also know that when its plugged into the ipod updater program the serial number also shows.
I would like to know if someone can build me a script that would grab the serial number to each ipod i plug in to the updater (maybe bash script, grab from string) copy it to the clip board and paste it to a text edit document. ohh and also a dialog box so i can write the persons name down. and if that can be added to the document as well.
Sincerely
an over worked employee.

If you still have the boxes handy, check to see if the S/N is printed on with a barcode. If so you can just zap those all in with a reader and be done with it in minutes.
Otherwise, to fish that string out of Updater first you must launch Apps/AppleScript/AppleScript Utility.app and check Enable GUI Scripting (enter an admin pass), then you can run this script…
click here to open this script in your editor<pre style="font-family: 'Monaco', 'Courier New', Courier, monospace; overflow:auto; color: #222; background: #DDD; padding: 0.2em; font-size: 10px; width:400px">tell application "System Events" to tell process "iPod Updater" to set an_sn to the value of static text 6 of group 1 of window 1
tell application "TextEdit"
activate
set a_name to the text returned of (display dialog "Enter a name for iPod " & an_sn default answer "")
if the length of (get documents) is less than 1 then make new document
tell (a reference to the front document's text) to set contents to contents & an_sn & tab & a_name & return
end tell</pre>Edit

I AM HAVIN MANY PROBLEMS WITH MY IPOD PLEASE READ AND HELP

I can't import movies on my iPod or even get it to show up on iTunes please help and respond if you know how to fix this problem.

you may need to convert the videos to a format appropriate for the ipod to see them .which are .mov or .mp4 video files. to do this you will ened to convert the videos using a 3rd party software that is not suported by apple. windows users have had either trouble or success using this software.
To use Videora iPod Convertor to convert movies for use on your iPod, consult these helpful links:
To get started: http://www.videora.com/en-us/Converter/iPod/
If you have questions: http://www.videora.com/en-us/Converter/guides.html
If you have more questions, post them here: http://www.pspvideo9.com/forums/index.php?c=8
Note that Videora iPod Convertor is a 3rd party program. If you need help with it, post your question there.
GFF

Trouble trying to install Imagine Mastering API v2.0 (IMAPIv.20) for Windows (KB932716) --please read and help

I'm getting the following message box when I attempt to install this program which I need to install a program to make my thumb drive bootable to install Windows 7.
"Setup Error
The updatebr.inf file is invalid."
If anybody has a solution to this I'd be grateful.

This one ?
https://support2.microsoft.com/kb/932716?wa=wsignin1.0
Arnav Sharma | http://arnavsharma.net/ Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading
the thread.

HOW CAN I GET A NEW LAYOUT/HOMESCREEN? PLEASE READ AND HELP

Hi, I currently have the Blackberry model Curve 8530, and I have been trying to get the new update (the menu style like the torch) because all my other friends have the same phone and I can’t download the update. My phone and computer say that I have the update v5.0.0.973 (platform 4.2.0.422) how can I change the menu style or platform to get it like the torch or the newer blackberry menu’s, because my phone desktop manager says that the phone is updated but it is not. Is there anyway to fix this?
Thank-you for your time.
Jamie Rowlands

8530 is an older model and can not use OS 6v software,
Craig Ashcroft Elite UK
If this post helps you please click the LIKE below the post(s)

Please read and help me.

When I try and download Photoshop, it says "Photoshop is a desktop app so you'll want to download it from your computer." When I am on my comuputer, So please help?

Travis which operating system are you using? Do you have the Adobe Creative Application installed? You can find more information regarding getting started with the Creative Cloud at http://forums.adobe.com/thread/1234831.

Iphone 4 lost all my things please read and respond fast :)

Hi, I was using I tunes and it said if I wanted to upgrade my phone so I said yes (Not in purpose) and i lost all my things in my phone so I wanted to know if there is anyway I can have all my things back, please respond fast

so i was playing around seeing if i can get the apps back, and after going through the payment process it recognized that i'v bought this already, so i was able to download my stuff back.. (should have figured this out already, since it was an online transaction)
Still want to recover my camera roll, and i was wondering if chat logs could be recovered too, such as for the whatsapp???

Audio faults survey - please read and respond, thankyou.

I have posted a thread on the 17" forum to see exactly what faults people have, and how many are having then.
Please reply to
http://discussions.apple.com/thread.jspa?threadID=309592
Thankyou.
If we know more specifics we can improve our chances of getting a fix.
So far, incidentally, on 10.4.4 I have had no echo loops, but still get a CD skip like break up.
Powerbook 17", 1.67GHz,DL,1.5GB DDR2. Mac OS X (10.4.3)

Audiohead wrote:
Do battery depletes faster when using WMA as opposed to MP3?
Yes, they do. All my data, and the confirmaton of this, is in the battery curves thread, which I assume you read as it's referred from the FAQ post.
People should also post their players, although it seems you're after Micro data.
In theory you shouldn't see much variation from the above data, but it depends how people use their players.

Users of systemd and lxdm or lightdm please read and comment [solved]

I'm trying to confirm that both lxdm and lightdm do not properly establish a systemd session upon login. Thanks to tomegun in this thread for the detective work. In short, if you both use systemd and login graphically with EITHER lxdm or lightdm, please post the output of:
$ ck-list-sessions | grep TRUE
$ loginctl
For me, logging in with lxdm or lightdm, the result is:
$ ck-list-sessions | grep TRUE
active = TRUE
is-local = TRUE
$ loginctl
SESSION UID USER SEAT
0 sessions listed.
So lxdm or lightdm are not establishing systemd sessions correctly... if I log in with gdm, the results for the `loginctl` are different:
$ loginctl
SESSION UID USER SEAT
9 1000 facade seat0
1 sessions listed.
Last edited by graysky (2012-06-24 14:59:31)

Hello, I have a problem when I connect multi-user on xfce session with lxdm. loginctl commande return me only one session (the first connected). Full description of my bug here :
starting xfce session from lxdm properly (systemd-logind support).
I've modify my /etc/pam.d/lxdm from
#%PAM-1.0
auth requisite pam_nologin.so
auth required pam_env.so
auth required pam_unix.so
account required pam_unix.so
session required pam_limits.so
session required pam_unix.so
password required pam_unix.so
-session optional pam_loginuid.so
-session optional pam_systemd.so
to
#%PAM-1.0
auth requisite pam_nologin.so
auth required pam_env.so
auth required pam_unix.so
account required pam_unix.so
session required pam_limits.so
session required pam_unix.so
password required pam_unix.so
session required pam_loginuid.so
session required pam_systemd.so
But it doesn't work better... any idea?

Future Things we want Rim to Fix on the Blackberry Playbook (RIM Please read and reply) Paying customers need some feedback.

Since we all purchased this item for the Flash on the Go experience let make sure we have the following in the next OS update please
Stereo Bluetooth (Can't sync with my Car Stereo) Ford Focus
for those long road trips
NetFlix App paying subscriber
Hulu App paying subscriber
Scapbook App that was premiered before the release of the BB playbook
Android
Please add to the list so Rim will read. Paying $499.99 to 699.99 for something that is a paperweight because of the things we can't have and there are list of websites we can't even access why?

Also VERY IMPORTANT!!!!!!!
We need a FILE MANAGER ASAP!
this to me is crucial cause i cant manage anything in terms of files right now on my playbook and i have 64GB of data i could store but there is no point of filling it all up if i cant even manage any files as of right now. its to the point that i rather store stuff in my BB smartphone than in my PB! which makes no sense!
Also,
-auto correction would be nice
-view pictures in portrait mode
-themes on PB would be great
-wi-fi music sync just like on my BB smartphone would be very good as well
-a .rar and .zip file opener and extractor for downloaded files
-BBM BBM BBM BBM! please BBM!
-Social feed app! that ill be amazing! or bridging the one i have on my BB smartphone!
-BB protect for PB is going to be necessary and mandatory over time! very important!
for now that will be all...

If Adobe competed against Microsoft Word... (important, please read and participate!)

Ever wonder what a word processing program by Adobe would look like?
I have. It would be full of Adobe-style timesaving Shortcuts, such as:
Being able to delete text on page 34 while you're looking at page 2, or
Being able to bold, resize and italicize text on page 7 while looking at page 15
Sound ridiculous? That's because it is! Yet, as ridiculous as it might sound for a word processing program to allow users to do this, that's the same nonsense that goes on in Premiere Pro.
For example, here are some of the things users can all too easily do to selected media that isn't even in the visible portion of their Timeline:
Delete clips
Ripple delete clips
Modify Video/Audio effects
Modify Motion settings
and now in PP CC, even add video/audio transitions
Which long time Premiere editor has never deleted an unseen selected clip by mistake, only to discover the mistake long after the fact (when no number of Undos could fix the problem)?
Which new CC editor has never mistakenly added transitions to unseen selected clips?
Are there any situations when users would actually want to change Timeline content that isn't within the Timeline's visible bounds?
Apparently Adobe thinks so. Could it be Adobe programmers feel that actually seeing the clips you're modifying is somehow unnecessary and even passé?
It doesn't take a genius to see just how incredibly stupid this is! IMHO, the ability to erroneously modify unseen clips in so many different ways, makes Premiere Pro unnecessarily prone to user mistakes, while providing 0 benefits in return.
My proposed solution is simple. Let's unite and all send Adobe (www.adobe.com/go/wish) the following official Feature Request, for the benefit of PP users:
*******Enhancement / FMR*********
Brief title for your desired feature:
Only allow clips that are within the visible portion of the Timeline to be modified.
How would you like the feature to work?
Never allow selected clips that fall completely outside the visible bounds of the Timeline to be:
-Deleted
-Ripple Deleted
-have video/audio transitions added to them
-modified in the Effect Controls window
-etc.
Note: If a clip selection is partially within the viewable bounds of the Timeline, then all relevant actions above should be allowed.
Why is this feature important to you?
I can't think of a single instance in which any user would ever want to modify selected clips that are completely outside the visible bounds of their Timeline. The ability to change unseen clips provides zero user benefits while making Premiere Pro extremely prone to user errors. Please fix this by only allowing users to modify clips that are within the visible portion of their Timeline.
User attempts to modify unseen clips could bring up a discrete warning, such as a small red bar that would flash once over the track(s) that have the unseen selected clips. For example, if a user hits the Delete key while there's selected clips on V1, V2 and A2 to the left side of the Timeline's visible portion, small red bars would flash once on the left-hand edge of tracks V1, V2 and A2. This would visually inform users that they have unseen selected clips on those tracks, and therefore the current 'Delete' command can't be used since the selected clips are outside the visible range of the Timeline.
For the sake of accommodating the preference of all users, this visual warning could be turned on/off in PP CC's new Timeline wing menu.
The more we speak up to let Adobe know how we want our software to work, the bigger our chance of eventually getting it, so lets all pitch in! If you've ever modified an unseen selected clip by mistake, please do your part and Copy/paste the FR above to send it to Adobe, or write your own version. Thank you!

Steven,
It's clear from your response that you don't even understand the details of my FR.
Did you miss the part where I wrote: "Note: If a clip selection is partially within the viewable bounds of the Timeline, then all relevant actions above should be allowed." This means if any action, such as a Ripple Delete is performed on a clip(s)/clip selection that is partially visible in the Timeline, in would work as it currently does (Rippling all clips in and out of the visible range). If the user tries to Ripple Delete selected clips that are completely out of view of the timeline, then the action would not be allowed, in order to prevent users from deleting clips by mistake and not even immediately seeing the result of that action. I thought it was already clear, but hopefully this clarifies it even further.
I'm talking about Premiere not allowing users to edit selected clips that are completely out of view on the Timeline. Chances are that if a user has selected clips that are completely out of view on the Timeline, he/she has forgotten about those selected clips and does not want to be able to modify those clips by mistake.
Regarding suggesting that I go to FCP just because you didn't like a FR request I posted, which you didn't even care to understand fully before responding... really?
Jim,
How often do you actually want to perform edits on selected clips that are completely outside the visible bounds of your Timeline? When does doing so actually save you time or provide you with a 'very real benefit' as you say? In my case, never. I'm guessing in the case of most people, it's never as well. I'd appreciate it if you could provide an example of when being able to do this is useful because I can't think of any. Thanks
Perhaps another approach would be to allow off screen changes to be made, as is currently the case, but have the red bar warnings I mention. This way, users would know everytime they change media that's off screen.
The ideal solution might be to have this as a preference: An 'Allow changes to off-screen Timeline clips' checkbox. When checked, things would work the error-prone way they currently do. Unchecked, they'd work the way I suggest. The red warning indicators could also be turned on/off as I mention in my FR. What do you guys think?
I sure would find this forum a much friendlier/more civilized place if people tried to help each other with constructive suggestions rather than just dismissing each other's ideas and making ridiculous comments such as 'if you don't like it, go back to FCP'.

AS3 Big Problem please read and suggest or help maybe?

how can i make this using split or other codes or way?
i mean i create a keyword
for example my keyword is "HELLO"
then if you input "HELLO" the output will be "HI"
even if i output "HELLO THERE" the ouput will be still "HI" because my keyword is HELLO
its for our thesis project PLEASE HELP US

Although your description doesn't clarify exact use cases it feels like you need to create a map of strings and read map on user entry. Here is an example - just paste it on timeline:
var systemText:TextField;
var inputText:TextField;
var wordMaps:Dictionary;
var keyword:String = "hello";
init();
function init():void
          drawTextFields();
          setMaps();
function setMaps():void
          wordMaps = new Dictionary();
          wordMaps["hello"] = {response: "HI", inputs: ["hi", "how are you", "what's up"]};
          wordMaps["good bye"] = {response: "babye", inputs: ["bye", "fairwell", "get lost"]};
function drawTextFields():void
          systemText = new TextField();
          systemText.defaultTextFormat = new TextFormat("Arial", 12);
          systemText.width = 300;
          systemText.height = 200;
          systemText.multiline = true;
          systemText.border = true;
          inputText = new TextField();
          inputText.defaultTextFormat = new TextFormat("Arial", 12);
          inputText.width = 300;
          inputText.height = 22;
          inputText.type = TextFieldType.INPUT;
          inputText.border = true;
          inputText.multiline = inputText.wordWrap = false;
          addChild(systemText);
          addChild(inputText);
          systemText.x = systemText.y = inputText.x = 10;
          inputText.y = systemText.y + systemText.height + 10;
          inputText.addEventListener(Event.CHANGE, onInput);
function onInput(e:Event):void
          var re:RegExp = new RegExp(wordMaps[keyword].inputs.join("|"));
          systemText.text = "You: " + keyword + "\n\nSystem: " + (re.test(inputText.text) ? wordMaps[keyword].response : "");

No luck with printer recognition with airpot express, please read and help

I have 3 macs and 1 pc running vista, my 3 macs print perfectly through airpot express. I installed the airport cd on my pc, but i cant print, Im no good with windows, i was wondering if you could walk me through the process.
I already clicked on add a printer but it wont find my printer, and my printer is connected to my airport express and its on, so, i dont get why it wont recognize it or why doesnt it work
please help

altairmactavish wrote:
I have 3 macs and 1 pc running vista, my 3 macs print perfectly through airpot express. I installed the airport cd on my pc, but i cant print, Im no good with windows, i was wondering if you could walk me through the process.
I already clicked on add a printer but it wont find my printer, and my printer is connected to my airport express and its on, so, i dont get why it wont recognize it or why doesnt it work
After you click on "Add a Printer", do you select "Add a Network, Wireless, or Bluetooth Printer"?
If that doesn't work, there should be a way to connect by specifying the IP address of your AirPort Express.

Please read and answer

Similar Messages

Maybe you are looking for