Please Read Msi.. My Kt8neo Damage 2 Hdd Disk 120 Gb Sata
Hello, i need help!........i have KT8NEO2FISR, but its damage MY new hdd disc sata 120 gb seagate 8MB..................after 1 month i change waranty my hdd disc by other same but my kt8neo again damage my new disc serial ata 120 gb seagate I have same problems.
I have problems SAY WINDOWS
1- BAD PARTICION TABLE
2- UNMOUNTABBLE_BOOT VOLUME
3- I LOST MY DATA PARTICION
4- I NOT CAN FORMAT MY DISC SINCE MY PC
5- I FORMAT MY HDD DISC IN OTHER COMPUTER BUT I RUNNIG WITH MY KT8NEO I HAVE SAME PROBLEMS
6- IN WINDOWS SAY documentos and setting /configlocal/ archivos temporales /tmp,damAge archieve please run scandisk.(I RUN SCANDISK ITS NOT FIX)
7-WHEN START OR RESTART MY PC IN LOGO WINDOWS MY PC AUTOMATIC RUN SCANDISK AND SCAN ALL PARTITION ALWAYS!!!!!
I NEED PLEASE THAT MSI FIX SERIAL-ATA WRITE WITH HDD DISC PLEASE IN NEW BIOSI HAVE VERY CONFUSED CON MY KT8NEO
CAN YOU HELP ME?
THANKS
Did you ever actually have this hard drive working?
Were you overclocking your board? The SATA HDDs are very sensitive to overclocking and the problems that you are describing are very common to this.
Also have you tried putting the HDDs on the VIA controller in your K8T NEO-FIS2R and used the Seagate disk that came with the hard drives to reformat them??? Because under the Seagate utilities there is an option to format and to also install the drives. This should at least get you to the point where you can do a fresh install of Windows. Don't forget to hit F6 when it asks you if you have any drivers to install.
Hope some of this helps!!
Similar Messages
-
MSI TV Tuners - Please Read This Topic First!
Welcome to the forum! If you are looking for help with your MSI TV tuner, this is a good place to start before posting. Look through the stickies below, and make good use of the Search function to see if your question has been answered already.
Can't find an answer? Then start a new topic of your own, don't just hijack someone elses. Give as much information as you can, look in the Suggestions on posting and getting better answers for advice.
Please bear in mind that this is a global forum, viewed by members from all over the world. Please make good use of the 'Location' field in your Profile, and please also state your TV signal type (eg PAL, NTSC) as well as source (aerial, cable, satellite). That should reduce chance of answers that are not really appropiate for your location.
MSI TV@nywhere Master PCI TV Tuner (MS8606)
MSI Product Support page - download drivers, manuals, software
MSI TV@nywhere MASTER PCI TV Tuner card FAQ
TV@nywhere Video OK, But sound loss after 40 sec (solved)
Vox USB Tuner
MSI Vox Box USB 2.0 TV Tuner FAQ
MSI Vox Power Supply...awesome!! PLEASE READ
Troubleshooting problems with hardware and MSIPVS
TV@nywhere Plus PCI
Problems with Windows Media Center
TV@nywhere Plus and Vista SP1
How to get audio from TV@nywhere Plus
TV@nywhere Plus remote issue solved!
TV@nywhere Plus - Vista Drivers required for remote control
TV@nywhere Plus and Windows 7
Theater 550PRO (PCI)
Theater 550PRO install issues
MegaSky 580 USB2
Mega Sky 580 and Windows Vista
Mega Sky 580 unavailable in MCE?
MSI MegaSky 580 Fix?
MegaSky 580 Installation Problems
Problems with MegaSky 580
New update for MegaSky 580
Weak reception from MegaSky, whats wrong?
Patches for PrestoPVR for MegaSky
DigiVOX USB2
DigiVOX and Windows XP x64 Edition
DigiVOX Mini II v3.0
DIGIVOX mini II V3.0 + Windows 7
Other useful topics
Windows XP Media Center Edition FAQ
Microsoft MPEG4 or DivX codecI developed a program with php and mysql.in php file I am using applet tag to print out some informations.when I connected from client to the server.in that page I cant run applet.in client browser I have java plugin too.if I tried applets and also this print applet in my laptop it is working but if I put them into the server and if I connect from client applet isnt working problem is this.please someone help me
-
Whoever's going to buy a MSI 945P Neo2-F. Please read!!!
To All whose going to buy this board,
Please read the CPU Support Page for MSI 945P Neo2-F again!
Core: Pentium D (64-bit, Smithfield, Dual Core, FSB533, L2 Cache 2x1MB)
Family Name: Pentium D 805 (2.66GHz)
FSB: 533MHz
Stepping:20
Supported: NO
http://www.msi.com.tw/program/products/mainboard/mbd/pro_mbd_cpu_support_detail.php?UID=707&kind=1
It has already been stated that the Intel 805D CPU is NOT SUPPORTED and yet I just don't understand why there are still some who wants to try their luck and start pointing fingers for their own mistakes! Even for CPU that are listed under NONE, it is to say that end-users will have to try at their OWN RISK! Please read and research for your own good.Both ways.
The reason for this thread is to serve as a warning as well as a Pre-Amp for those that wants to run this board with a 805D CPU.
Let us all stop the finger pointing from this point on. No matter how much we trash on, things will still be what they are. Likewise an apple can't turn into a pineapple no matter what though both are fruits.
If everyone does own research well, such will no happen today. -
Please help! My LG external hard disk is not showing in finder and trouble using disk utility
I used my LG external HDD disk drive on my mac a couple of times but now it's not being recognised by my mac anymore and doesn't show up on finder.
I found the disk in disk utility and when i verified it, it said:
Unable to bootstrap transaction group 3164: incorrect block type
Unable to bootstrap transaction group 3163: incorrect block type
Unable to bootstrap transaction group 3162: incorrect block type
Unable to bootstrap transaction group 3161: incorrect block type
No valid commit checkpoint found
The volume AE055338-D940-488B-A5E9-0A6F4701832A was found corrupt and needs to be repaired
Error: This disk needs to be repaired. Click repair disk
I clicked repair disk and it said:
Unable to bootstrap transaction group 3164: incorrect block type
Unable to bootstrap transaction group 3163: incorrect block type
Unable to bootstrap transaction group 3162: incorrect block type
Unable to bootstrap transaction group 3161: incorrect block type
No valid commit checkpoint found
The volume AE055338-D940-488B-A5E9-0A6F4701832A was found corrupt and cannot be repaired
Error: This disk needs to be repaired. Click repair disk
I tried several other times to repair it by clicking repair but the same information kept popping up.
I'm also unable to erase or partition the disk. I have no important files on it so I don't mind deleting them all but i'm unable to do so using disk utility. Please advice on what to do or the steps to take from here. Thankshttp://
-
I work for Office Depot, in the tech department. Basically, one of our associates was supposed to do a data backup, and re-install Windows 7, then transfer the files back. He used Windows Easy Transfer and compacted everything into a 163 GB file.
Now comes the hard part. When we try to put it back on his computer ((drag-and-drop to the desktop) which has been wiped back to factory settings using the recovery partition), it stops at 79.5 GB remaining (you know how it doesn't give you a % of completion,
it just shows how many GB are remaining) and then says "Can't read from the source file or disk" and gives you an option to try again, or cancel. It gets hung up on the same point each time.
Normally, this wouldn't be a huge issue, but the contents on the drive are his wife's architect blueprints and interior design stuff, along with wedding photos, etc, which are the only copies they have. On top of those, they have court documents and other
important files that we are unable to access now.
I wasn't involved with this transfer, so I'm trying to clean up the mess as best I can. I remembered that the customer's wife was Russian, and had some files typed with a Russian keyboard, so on and so forth. I wonder if that's the issue? If not, I really
have no idea how to manually extract things from a ".mig" file, or how to diagnose what area is potentially corrupted.
In light of this situation, we tried using "Recuva" to recover the files post-wipe, but everything was corrupted or unable to be opened, and it also extracted and recovered all of the "useless" photos, such as the skype logos, up and
down arrows for browsers, etc (it was 160,000+ photos).
Trying to avoid a potential lawsuit, unhappy customer, and costing the company lots of money to see if professionals can get into this external hard drive.
Other relevant information:
We used a Toshiba 500 GB (465 GB) external hard drive.
Customer's computer is an HP Pavilion P6000 Series (Model No. p6520y) running Windows 7 Home Premium 64-bit Service Pack 1.
Any other information that is needed can be provided, thanks in advance, and hopefully we can find a solution to this issue quickly!
-JohnI think there's a lack of understanding somewhere.
"If you even can't start the process, please unplug it from your new PC. Then head back to your new computer and plug
the external drive back in to your new computer. "
Unplug from new, head back to new, plug it back in? That doesn't make much sense! Haha.
I knew what you meant though, somewhat. When I search through the drives after clicking yes (Has windows easy transfer
already saved your files blah blah blah) I click on the transfer file and it says "Windows Easy Transfer could not open the file".
Rather than drag-and-drop the file to the desktop, I now tried to double-click on the file itself while it was plugged
into the computer. It opened, and it started transferring until it was about 70% completed, and then an error popped up saying "WET can't open the easy transfer file, make sure your USB device is plugged in or check your internet connection".
I checked, and the USB hard drive's light wasn't on. Now, I unplug it and plug it back in, and the light comes back on,
so I click Retry, and it resets the bar back to nothing and says "Transfer time: 1 minute".
Rather than continue trying, I clicked "Cancel" instead of Retry, and it says "Your transfer did not complete successfully."
It says to click "view report" for more information, but there's no "view report button".
At the moment, I am scanning the External Drive for bad sectors using the check disk tool in properties. It's frozen
at "0 USN bytes processed". -
I updated from the original version to 6.0.1 and when I re-started FF there were 4 icons on my desktop. I managed to delete one of them, but I cannot delete the other two - to leave me with just one.
I get the error message of "Cannot delete file: Cannot read from the source fie or disk".Here's the meaning of the error that you received.
"An error has occurred. ERROR :10-FC06-0002" -- may be caused by damaged recovery media or faulty hard drive"
Possible that the problem is on the recovery also.
Hope this helps. -
Frequently Asked Questions (FAQ) BEFORE you post, PLEASE read this first
PLEASE READ ALL OF THIS POST BEFORE POSTING ON THE FORUM FOR THE FIRST TIME!
Welcome to the Creative Labs MP3 Players web forum!
This forum is for discussing issues related to the MP3 players (digital audio players) made by Creative Labs for those in the Americas, Europe and Asia Pacific . Although we're not going to turn away folks from other areas
The primary language of the forum is English, and posting in English is likely to get you a quicker response.
If your question does not relate to Creative MP3 players please find another more suitable forum to post in. If you want to discuss another player, or something not covered by another forum, please use the Off Topic forum.
CONTENTS
How to contact support
Hot topics
General issues
Before you ask your question
When you ask your question
After you ask your question
Low volume issue
Nomad Primer
Nomadness.net FAQs
More useful links
Wishlist and petitions
Suggesting changes
. How to Contact Support
Please note this is a peer forum and Creative's Support staff do not guarantee a reply here. If your issue is urgent, you are within your warranty period and/or you do not get a fast reply here you should contact Creative Labs Technical Support.
To contact support click the Support > Contact Customer Support link on this page.
When contacting Creative Support by email it's important to note that you must reply to the autoresponse email you first receive, as detailed in the email itself. Also make sure to check any spam trap you have on your email system if you have not received a reply.
It's also important if you feel that you have a bug or defect with your product to register that issue directly with support. Don't rely on the forum to raise awareness of an issue.
2. Hot Topics
This is dividied into 3 sections: General, Tag based players & USB mass storage players.
Make sure to also look at Section 3, which covers some of the other General Issues.
General
Where do I get the latest software, drivers and firmware?
Click the link Support > Downloads on this page.
In general, when installing on a new PC you need to download the driver, and some software to communicate with the player e.g. MediaSource, Media Explorer. For players using the v2.xx MTP/PlayForsure firmware drivers are not necessary, but you must have Windows XP and Windows Media Player 0 (this provides the MTP driver).
Important: Even though files are described as updates, none of the software requires a previous version to install. At worst they will prompt you to connect your player to verify you own a Creative product.
Note if you are downloading MediaSource make sure to download and install the relevant MediaSource plugin for your player. If MediaSource can't detect your player this is the first thing to check. For the v.xx PDE firmware the plugin is called the Creative Zen and NOMAD Jukebox plugin for Creative MediaSource , and for the v2 MTP/PlayForSure firmware it's called Creative MediaSource Plugin for PlaysForSure devices .
I am completely new to MP3 players, where should I start?
Have a read of my Nomad Primer, so called as Creative's MP3 player range tend to be prefixed with the word Nomad.
I think I have a bug, how can I check?
There's a known bug list hosted at my site here. If you want to add a bug then please
I have a wish request for the player, what can I do?
You can post it here (see the petitions listed in Section of this FAQ), email it to support, and/or add it to the public wishlist I host here by
I'm having connection problems with my player
If you can, the best test is to try your player with another PC, to see if you still have the problem. This localises whether the problem is with the PC (most likely the USB) or the player. See the link below (search on "connection problems") for a lot more troubleshooting on this.
What bit-rate should I encode my music at?
Ultimately it's down to your ears what bit-rate you prefer, and you should listen for yourself to determine it. If you ask on the forum you'll get many different opinions.
Make sure to look at the "MP3 vs. WMA" link below also.
How long should my battery last?
For the Zen and Nomad Jukebox players, to get some idea of how long your battery will last for a given bit-rate look at the battery curves thread. Ultimately battery life is dependent on how you use the player, make sure to follow the "why doesn't my battery last as long as expected?" link below.
How long does an RMA take?
Typically 2 weeks. But it might take a little longer, so don't start posting if it's 5 days.
I want to know how people feel about their Zen Micro/Touch/MuVo etc.
There's a long post titled Experience with your Creative player that has many posts from users about their players. Please search back for threads about specific players before starting a new thread.
Where can I buy online music or get legal downloads for my player?
See this thread.
My tracks don't play at the correct speed e.g. they play too slowly, why?
Chances are they are encoded in an unsupported sampling frequency. The tracks will need to be re-encoded at a supported bit-rate and/or frequency with something like Creative's MediaSource Audio Converter or dbPowerAmp.
Can a Creative player work on an Apple Mac?
It isn't officially supported, but some kind folks out there have written freeware applications to get your Creative player working with Macs. XNJB provides support for the Zen players, and requires OS X 0.3 or 0.4 (check the site for full details). MuVoHelper solves some problems with getting the MuVo to work optimally. The iTunes Zen plugin should support all Zen players. Note if the link to the plugin is broken just Google "iTunes Zen plugin" to find other sources. Also note there's no guarantee that these programs will work with the Mac, so if you have issues you should address your problems to the developer(s) of the relevant program.
Can a Creative player work on Linux?
Again it isn't officially supported, but again some kinds folks out there have written freeware applications to get your Creative player working. There's the Gnomad2 project. And don't forget the Linux forum at Nomadness.net if you are still having problems.
Tag Based Players
This section covers the players that use a hard disk and work using tags e.g. Zen Xtra, Touch, Micro, Sleek.
My Zen is not behaving properly, won't startup, or goes into rescue mode. What should I do?
If the Zen is not starting properly or not behaving correctly, first try to reset it. To reset all players except for the Zen Micro there is a small switch on the side of the player typically, that you should press using something like a bent paper clip. Don't use anything sharp. To reset the Zen Micro simply remove the battery and replace it.
If this doesn't work then access rescue mode, and try running a disk cleanup.
Next you should try reloading the firmware/OS, but beware if you are having connection problems also with your PC you may end up with a player that has no firmware and cannot be reloaded.
The last resort is to format the player. This will erase the contents from the player, including the content that ships with the player.
If none of these resolve the problem and you are under warranty you should get in contact with support to arrange replacement of the player.
If you aren't under warranty Creative will still repair the player, which you can arrange by contacting support.
How do I do a Disk Cleanup and/or access Rescue/Recovery Mode?
Refer to the sticky Rescue Mode thread. Disk Cleanup is accessed from this. Note that the MuVo players (with the exclusion of the MuVo? players) do not have Rescue Mode.
How long should a Disk Cleanup take?
It should only take a few minutes, and no longer than 30 minutes. Anything longer than this and there is a problem with the player and you need to contact Creative Support.
How long should a format take?
Only a few seconds. Anything more than a minute and there is a problem with the player and you need to contact Creative Support.
Although I can get into Rescue Mode, I can't select any option, or the options don't work?
If Rescue Mode is not working properly or commands can't be chosen the player is faulty. You need to contact Creative Support.
When are the Zen 20Gb/Neeon going to be released outside of the Asia Pacific region?
Due to popular request the Neeon is launched in the USA, but nowhere else for now. If you want the Neeon then contact your regions Customer Services to request it.
The Zen 20Gb is available from some shops in the USA and Europe e.g. Cambridge Soundworks, and Amazon.co.uk.
Is there a known issue with the Zen Micro headphone socket?
Creative Support have neither confirmed nor denied it officially. Some users have posted purported emails from Creative on the forum saying that the socket has been reinforced, but these have not been confirmed by Creative Support either. The exact incidence of the problem is unknown, but newer players seem to suffer less from it.
Should I buy the Zen Micro or Touch etc. and what colour should it be?
We can't tell you what player to get, or what colour it should be. Look at your collection size and the features of the player (see Nomadworld.com for the product pages) and decide yourself based on this.
Why does my Zen Micro battery drain so quickly?
The standby time (24 hours from turn-off) for the Zen Micro seems to use a lot more power than previous Zens. Creative have released both v (..0+) and v2 (2.20.05+) firmware that reduces the standby time to 4 hours. Make sure to update to one of these if you have a draining problem.
Also see JazzMC's detailed page on this problem.
Why is my Zen Micro/Touch Touchpad so sensiti've and/or difficult to use?
The Touchpads take some time to get used to.
continued below... Message Edited by SSR on 2-29-2005 04:03 PM7. Low Volume issue
See here in the Zen FAQ at Nomadness.net.
If the firmware will not apply because it says the version number is the same use the Reload OS option, access to which is described in the relevant FAQ for your player below.
8. Nomad Primer
If you have ordered, or just bought a Nomad Jukebox, Zen, or MuVo?, consider reading the Nomad Primer.
It may be worth reading even for the more experienced User.
9. Nomadness.net FAQ's
General FAQ
Jukebox FAQ
Jukebox 2 FAQ
Jukebox 3 FAQ
Jukebox Zen FAQ
MuVo FAQ
Nomadness.net is the foremost peer site on the Web for the Nomad players on the Internet; with news, articles, web forum, download archi've, and more!
0. Some more useful links
Nomadworld.com - Creative Labs's International Nomad website (based in the USA)
Player Manuals - Downloads of digital manuals
Notmad Explorer - 3rd party software
Battery Uni'versity - very good, comprehensi've site on batteries
Chinese Support thread - with information on how to get chinese characters on your player
. Wishlists and petitions
Here are links to a number of general wishlist and petitions, so rather than starting your own you can add to those that already exist, or of course add your support for a feature you would like to see.
Also remember that the only collecti've public wishlist is maintained here at StainlessSteelRat.net (this is not affiliated with Creative Labs, but maintained by the author of this FAQ). There is also a bugs list here. So please
Wishlists
Zen Micro
Zen Micro (another)
MuVo Sports C00
MuVo N200
Petitions
AAC support
Lossless codec support
MP3 Pro support
Ogg Vorbis support
Audible support
Genre definable EQ
Gapless playback
Games support
Insert to queue
No "the" in Music Library
Open source firmware
Play count and ratings
TXT viewer
USB mass storage / dri've letter support
Track number duplicate checkAlbum art
Substring search
Dual firmware for both tag and dri've letter support
Rename "Reload OS" to "Erase OS"
Zen Micro alarm enhancements
Zen Micro always visible clockZen Micro Audible support
Zen Micro customisable standby time
Zen Micro EAX
Zen Micro radio enhancements
Zen Touch non-PlayForSure firmware with bug fixes
Zen Touch bookmarks
Zen Touch EAX support
Zen Touch random button changeZen Touch Audible support
2. Suggesting changes
To suggest changes to this FAQ please
Thanks for reading! -
Cannot read from the source file or disk
I had to get a new hard drive for my Satellite A665 old one kept freezing up; had a recovey disk from Geek Squad when I got it but they did not work. So I ordered a Recovery Disc set from Toshiba.
A few minutes after I insert the 3nd disc, I get the following message:
Cannot read from the source file or disk
PREINST14.SWM
Type: SWM File
Size: 670 MB
Modified: 10/29/2010 11:24pm
Clicking [Try Again] or [Skip] clicked try again twice. Gave same message so clicked skip. Got another message.
Cannot read from the source file or disk
PREINST18.SWM
Type: SWM File
Size: 372 MB
Modified: 10/29/2010 11:24pm
Clicking [Try Again] or [Skip] clicked try again twice. Gave same message so clicked skip after checking do it for next one. Got error message.
An error has occurred.
Error: 10-FC06-0002
Recovery Error.
Please press [OK] to turn off the computer.
I tried erasing the disk, then running the Recovery Wizard again, but wind up in the same place.It's hard to know exactly what the problem is. You might want to contact customer support because it could just be a faulty disc.
- Peter -
MSI K7N2 ILSR - Maximum HDD size
Can anyone please tell me what the maximum hard disk size that a MSI K7N2 can use. It currently has a Seagate 500Gb drive and I want to add a Seagate 750Gb. Will it work okay ie be able to see and use the full capacity of the drive?
Many thanks for your help.should do
may need jumpering to sata 1 as the controllers old
i would make sure it has jumpers...check their website
as some drives need software
to lower to sata 1
and you then need another pc which can see them to run it -
Users with NoClassDefFoundError & nested jars - PLEASE READ!!
A hell of a lot of the traffic on this forum is to do with getting a NoClassDefFoundError while trying to access classes that are inside a jar within your own jar.........please please please read this if you're having this problem, it will explain what's going on, and will save you from having to post the same question for the millionth time!!!
Unfortunately you can't embed jars within a jar and expect them to be referencable for the classpath from outside the main jar. The "Class-Path" attribute in the manifest is used to refer to other jar files outside of your jar file.
The usual approach to solve this problem is to unpack the jar files you want to embed and then rejar everything together in one big jar file again. This isn't always a great approach though, I know I'm looking for an alternative. So far my only alternative is dynamic class loading using a classloader, however this isn't great if you need to refer to several hundreds or even thousands of classes.As I replied in another post (http://forum.java.sun.com/thread.jsp?forum=22&thread=416726&tstart=0&trange=100) I think Sun should really add this capability to the JVM itself. Perhaps a new file format, .aar (for Application Archive) that the JVM DOES read embeded .jar/.zip files from. Even if it is only one level deep, that would be extremely helpful. I have built a plugin engine and originally was packaging my plugins in .jar files. But if a plugin "wraps" a library like ant.jar or something, you are out of luck, the plugin has to be un-archived to the disk for it to work. We came up with a solution, which is a .par file (for plugin archive) that does embed everything, but the engine itself at runtime un-archives the .par file into a "working" directory behind the scenes. While this does work, the main problem is if you deploy an app with a lot of plugins it takes a while to un-archive everything before the app initially starts.
Our next step is to do what Carter says, build a custom jarjar classloader. That is, we'll extend URLClassLoader, and in the loadClass() call (for our plugin engine we break the normal go to parent loader first tradition) we'd have to "scan" a plugin .par file for any .jar files. If the .par file contains .jar files, we then retrieve those and scan them in memory for the class we are looking for.
As I explained there are no doubt several ways to make this fast. The classloader would want to keep a list of all packages found and in what .jar/.zip they were found in, so as more classes within the package of a given .jar are asked to be loaded, the engine knows exactly what .jar/.zip to jump to. Also, OS hd caching will most likely take affect somewhat thus if many classes from the same .jar file are required it is possible that .jar file would be cached and multiple i/o access will not take place. -
I have only had Photoshop elements on my computer for less than a month (free trial). The past few days I am getting an error message whenever I try to do anything that reads "Cannot __ because the scratch disks are full." I do not know how to fix this problem. Any advice would be greatly appreciated!
Photoshop Elements Mac user
If your program is Photoshop Elements (any version) you have posted in the wrong forum. Somehow your thread has been posted in the Adobe Premiere Elements Forum (video editing).
Please re-post your thread in the Adobe Photoshop Elements Forum or wait for a moderator here to see your thread here and move it from here to there.
Photoshop Elements
Think about.....Sounds like you do not have enough free hard drive space for editing. In your Photoshop Elements Mac case, please check out Photoshop Elements/Preferences/Performance and the Scratch Disk area.
Photoshop Elements Help | Scratch disks and plug‑ins
ATR -
Can someone please tell me how to turn OFF Disk Mode on an Ipod Classic?
Can someone please tell me how to turn OFF Disk Mode on an Ipod Classic
Just Reset it like this
Toggle the Hold switch, make sure you dont see the red mark when you do the next step
Reset the iPod -> Press Menu and Center button simultaneously for about 10 secs or till the Apple Logo comes ON
Then release the buttons
Select your preferred language.
Here is the Apple support Article on the 5Rs
http://www.apple.com/support/ipod/five_rs/classic/
Good Luck! -
Please Read if Concerned about Bending iPhones
In the past few days, there has been a lot of debate, questioning the structural integrity of the iPhone 6/6 Plus; is the iPhone 6/6 Plus prone to bending? Since the number of threads, regarding this issue, has increased, I'd like to alleviate some concerns by providing you with enough information to draw your own conclusions and make a well informed decision. You don't have to agree with my findings, but please be respectful in your comments.
Short Answer:
The short answer is No; there is no cause for concern about your iPhone 6 or 6 Plus bending in your pocket, unless normal use for you is exerting over 90 lbs of external force, which is highly unlikely for most. This test was conducted by Consumer Reports in a controlled environment in which the force applied was accurately measured. If you're concerned you might expose your pocket to 90 lbs of stress or more, you shouldn't be. Only 9 people out of 10 million iPhone 6 Plus users have reported a bent phone; which means that .00009% of iPhone 6 Plus users have actually subjected their devices to 90 lbs of force, or more.
If your skeptical, or would like to know how I arrived to this conclusion, then please read further. I’ve provided a detailed explanation with supported links to articles and videos for your convenience.
Detailed Explanation:
Most media outlets were quick to judge the iPhone 6 Plus, basing their reports from this youtube video below that went viral, along with massive retweets of bent iPhone 6 Pluses, circulating on the web.
https://www.youtube.com/watch?v=znK652H6yQM
If you watch the video, you'll notice the phone doesn't bend on a dime; he's applying an aggressive amount of force when bending his iPhone 6 Plus. Because that force wasn't measured, you cannot conclude whether it accurately depicts normal or extreme conditions for which your phone may be subjected to.
The same person posted a follow-up video in which he force bends other phones for comparison. Again, since the force being applied to each phone was not scientifically measured, there's no way to verify if more or less force was used to bend each phone being compared. For example, if he was fatigued from bending the first phone, then it's possible less force was applied to the subsequent phones in succession. You can watch his video below.
https://www.youtube.com/watch?v=IROcoJeVfSI
As a result of this growing buzz, Apple's stock price took a hit to which they finally responded, stating there's no cause for concern with normal use. It's an extremely rare case, as only 9 people out of 10 million have reported a bent iPhone. You can read about it in the Wall Street Journal, below.
http://online.wsj.com/articles/apple-defends-against-complaints-of-bending-iphon es-1411668618
After reading Apple's response, the first thought that came to mind was "damage control", and I was somewhat skeptical of that low number (only 9 people reported a bent phone). It prompted me to do a little more research.The guy in the unbox therapy video, along with most other media outlets, kept boasting about an "increasing number of reports" of users with bent iPhones. I was guilty of saying bend-gate was a legitimate concern due to an increasing number of reports. But I hadn't actually verified that number; I was echoing what I had heard from other media outlets. In my research (or online search), I could not actually find a significant number of complaints of bending, from actual iPhone 6 Plus owners. Because I was unable to verify these “increasing number of reports,” suddenly Apple numbers didn't seem that far fetched.
In contrast to videos posted by Unbox Therapy, Consumer Reports performed their own tests in a controlled environment in which they actually measured how many pounds of pressure it took to deform phones from a variety of different manufactures, including Samsung and Apple. Does this test reveal that some of the competition is less prone to bending than the iPhone 6/6 Plus? Absolutely, but keep in mind the iPhone 6 Plus is thinner, but more importantly, its structural integrity shouldn't be a concern, if your normal use doesn't exceed the breaking point of 90 pounds of exertion.
http://www.consumerreports.org/cro/news/2014/09/consumer-reports-tests-iphone-6- bendgate/index.htm
Factoring Apple's response, stating a total of 9 people out of 10 million reported bent iPhones, along with the tests performed by Consumer Reports, I was able to come to this conclusion. If Apple’s numbers are remotely accurate, it means only .00009% of iPhone 6 Plus users have actually bent their phones, which also means it's probable those bent phones were subjected to external forces of 90 lbs or greater. Even if the margin of error was give or take 1,000 phones, the probability of someone bending their phone would still be extremely low.ckuan wrote:
Apple Stock price always took a beating no matter what it is.
Apple stock price is subject to all kinds of manipulation with real news or generated (false) news.
I don't disagree, but my point is while a declining stock price may be inevitable as a direct result of this news, perhaps faster damage control by Apple's PR could've softened the blow, and maybe not get hit as hard. -
What is done with damaged hard disks when replaced by Apple?
Wondering if anyone knows what the security policy and process is that is followed by Apple when a damaged hard disk is replaced by Apple. Is the disk destroyed, or demagnetized. How do we know that the data on the disk is will not be accessed and copied anywhere? Is there a stated policy document available somewhere in the Apple Store that discusses this ? Thanks.
How do we know that the data on the disk is will not be accessed and copied anywhere?
We don't. If privacy is a concern, and you can't wipe the drive, destroy it. -
Regarding no employee discount message! Please Read everything and you will know
come on does anyone read what the sign says anymore? The first page when you go to www.verizonwireless.com/iphoneorder says in big bold letter PLEASE READ BEFORE ORDERING
It then goes to say, that employee discounts on plans will be honored. It also goes on and says that you will not see it during checkout, but it will be applied to your monthly discount... Then it gives a link and says after you receive your iphone to go to this webpage to make sure employee discount is still on phone.....
I mean why doesnt anyone read anything before ordering.... Verizon would be a genius if they put in big bold print, that you where signing a 10 year contract, and had to give your first born child up, because no one would care.... This is a contract your signing you should read everything! Then maybe people wouldnt need to ask all these questions...
Sorry hope everyone enjoys there iphone just get sick of people asking questions that are already answered if they just lookedI am one of those people interested in what you speak of. I looked at your link and it doesn't mention anything of the sort. I have completed placing my order and the only thing I saw was the first question in BOLD is the message you refer to in the subject. Can you post the link to the information you write about so I can see what you are saying for myself? When you can do that, then beat me up for not reading.
Maybe you are looking for
-
I have gotten about 4 emails (Frontier) with quick time attatchments, but it won't play them. I just get a mesage saying it can't read it in the current format. Do I need to download additional software and if so what?
-
How to handle journal table using JPA+TopLink
Hi, I am using JDev10.1.3.3 with Swing and EJB + JPA + TopLink using Oracle database. Every business table has a journal table. Does TopLink have any journal features or do I have to write my own code to insert data into the journal table. Thanks, Ji
-
Hello all, i'm looking for an Ultrabay adapter for HDD to extend my Z60m-system. At the lenovo-website, I found an adapter that sould, according to the description, fit into my system. Ultrabay Adapter Has anyone experience with this model? My second
-
Rolling back the transaction from stateful session bean
Hi, How can I mark the transaction to be rolled back in a stateful session bean implementation?. Should I call setRollbackOnly method or throw a RemoteException or throw an EJBException, etc.? the configuration is : OC4J 9.0.4 Stateful session bean R
-
Does Logic studio works on Mac OSx Lion?
my Mac Could not read my install dvd Logic studio disc in lion. Why? Please reply current mac version: 10.7 ( mac Os x Lion )