PLEASE READ REGARDING iPod losing data
I have bought my 5th generation iPod and have not done anything to it that will cause to malfunction in anyway. But im getting annoyed that a lot of times i connect by black video iPod into my Windows Xp computer. Then iTunes pops out. I click on the iPod on the left and its WHITE!? Then i check how much space its used and it says 1.5 g data used? I normally have around 6.3 g.
I just lost all my videos and photos but i still have the songs for some reason. Then i always have to keep updating it cause everytime i connect i keep losing data.
Basically, when i connect my iPod a lot of stuff gets erased and i have to keep updating it.
well umm of course it appears WHITE because it cant detect that your ipod is black and it sounds like you reset it or deleted your videos on your computer and lost them in the ipod last time you connected
dell Windows XP
Similar Messages
-
I am moving from PC to Mac. My PC has two internal drives and I have a 3Tb external. What is best way to move the data from the internal drives to Mac and the best way to make the external drive read write without losing data
Paragon even has non-destriuctive conversion utility if you do want to change drive.
Hard to imagine using 3TB that isn't NTFS. Mac uses GPT for default partition type as well as HFS+
www.paragon-software.com
Some general Apple Help www.apple.com/support/
Also,
Mac OS X Help
http://www.apple.com/support/macbasics/
Isolating Issues in Mac OS
http://support.apple.com/kb/TS1388
https://www.apple.com/support/osx/
https://www.apple.com/support/quickassist/
http://www.apple.com/support/mac101/help/
http://www.apple.com/support/mac101/tour/
Get Help with your Product
http://docs.info.apple.com/article.html?artnum=304725
Apple Mac App Store
https://discussions.apple.com/community/mac_app_store/using_mac_apple_store
How to Buy Mac OS X Mountain Lion/Lion
http://www.apple.com/osx/how-to-upgrade/
TimeMachine 101
https://support.apple.com/kb/HT1427
http://www.apple.com/support/timemachine
Mac OS X Community
https://discussions.apple.com/community/mac_os -
[PLEASE READ] running iPod independently issue
I have a 5G 60GB iPod. I am running windows XP and iTunes 7.0.0.70. What happened is rather simple. My iPod froze up (couldn't turn off or reset at all). I disconnected and reconnected battery in order to reset it. The iPod then turned on but the files were corrupt so I had to restore. done. now here is the problem:
I put a bunch of music back on it. It will work perfectly for anywhere between 30-90 minutes before freezing up and asking me to restore it again. EXCEPT when I plug it into iTunes, the program recognizes it and I can play files off the iPod through iTunes. When I disconnect it, it immediately freezes up.
I have restored several times, and even tried reformatting it (FAT32 file structure) though a windows-based program. Any suggestions?By the way, to install the latest version on your computer that Deggie was mentioning (7.1.1.5), go to this page:
Download iTunes - 7.1.1.5
-Kylene -
I plugged in my ipod touch 4g to sync with my macbook pro and itunes sent an error saying itunes cannot read your ipod please reset your ipod, so as suggested by itunes i reset my ipod and now when i plug my ipod in itunes doesn't even recognise it and doesnt sync with it
Hello frankini
Continue your troubleshooting with the article below to resolve issues with your iPod touch not being seen in iTunes. It will walk you through checking the drivers as well as any security software that may be blocking it.
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/ts1538
Regards,
-Norm G. -
Error saving data structure CE11000 (please read log) message number KX 655
while activating the data structure in the operating concern of CO PA sap gives the following errors.
1.Error saving data structure CE11000 (please read log)
Message no. KX655
2.Error saving table CE01000
Message no. KX593
3.in Log Reference field CE31000-REC_WAERS for CE31000-VVQ10001 has incorrect type.
Pls suggestHey,
Below tables are related to application logs
BAL_AMODAL : Application Log: INDX table for amodal communication
BALC : Application Log: Log or message context
BALDAT : Application Log: Log data
BALHANDLE : Application Log: Lock object dummy table
BALHDR : Application log: log header
BALHDRP : Application log: log parameter
BAL_INDX : Application Log: INDX tables
BALM : Application log: log message
BALMP : Application log: message parameter
BALOBJ : Application log: objects
BALOBJT : Application log: object texts
BALSUB : Application log: sub-objects
BALSUBT : Application log: Sub-object texts
-Kiran
*Please mark useful answers -
Ipod not connecting again, apple please read this.
First let me state that I made posts awhile back about my Ipod touch not being able to be recognized by itunes at all and just as a camera by windows. Now every single guide did nothing to help and the FEW people that posted had posted things I already did that did not help.
HOWEVER the version of Itunes that was prior to the one I just downloaded connected PERFECTLY with no issues.
But I just updates and wouldnt you know it, the connection problem is BACK. Apple please read this, the last version of Itunes had something different with how it connected to the Ipod...PLEASE bring that back, its so inconvenient not being able to connect to my own Ipod
If someone wants to post a reply that might help feel free...but everything on this website and even a few others not posted here have not worked, this is mostly me praying that Apple reads it...that tiny difference on how it connected made a huge difference with my computer.Thanks. I worked out a simpler method of turning off the internet access - just switching off my wireless modem. Either way, this works and with the PC not connected to the internet, all three Apple devies will sync.
Thinking about it now, I had a similar problem a few versions ago which I recognised because with Home Sharing on and connected to the internet iTunes was trying to find files from someone in another hotel room who also sharing the hotel's wireless network. My devices would not sync then either. This seemed to be resolved with subsequent itunes upgrades until now ....
Thanks for the advice. Let's hope Apple's next 'update' actually updates itunes so it can sync Apple devices whilst simultaneously connected to the internet (not a big ask really). -
My computer reads my iPod as if its software were of a camera's. i've already reset it, and it still hasn't changed the iPod's software format. What do I do??? Please help me!
To get iTunes to see the iP{od see:
iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows
or
iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X
It is normal and expected for the computer to see the iPod as a camera. -
New 4th Gen. iPod Nano 16GB. Plugged in for the first time. PLEASE READ!
I got the new 4th generation for christmas and i plugged it in and something pops up about registering and i clicked later.
and then it tells me that I have to Read and agree to the software.
So I read through all of that and at the end, there is a box you can check to say that you have read and agreed. I did that, but then you have to click a button to confirm/continue im guessing. Well, my problem is, that my computer screen is too small for me to see the button, in other words, I cant confirm/continue and am stuck there, I cant do anything else with the ipod with out continuing this step. I have tried to Maxamize the screen and dragging over. nothing seems to work.
Is there any other day to agree and confirm to this? If there isn't, is there a way that I can get to the confirm/continue button?
I really need to use my iPod.
I Have windows Xp.
PLEASE REPLY.
my iPod is important.
I have tried changing my screen resolution.you have a Windows computer -- that's the problem.
it would work just fine on a Mac. -
Regarding no employee discount message! Please Read everything and you will know
come on does anyone read what the sign says anymore? The first page when you go to www.verizonwireless.com/iphoneorder says in big bold letter PLEASE READ BEFORE ORDERING
It then goes to say, that employee discounts on plans will be honored. It also goes on and says that you will not see it during checkout, but it will be applied to your monthly discount... Then it gives a link and says after you receive your iphone to go to this webpage to make sure employee discount is still on phone.....
I mean why doesnt anyone read anything before ordering.... Verizon would be a genius if they put in big bold print, that you where signing a 10 year contract, and had to give your first born child up, because no one would care.... This is a contract your signing you should read everything! Then maybe people wouldnt need to ask all these questions...
Sorry hope everyone enjoys there iphone just get sick of people asking questions that are already answered if they just lookedI am one of those people interested in what you speak of. I looked at your link and it doesn't mention anything of the sort. I have completed placing my order and the only thing I saw was the first question in BOLD is the message you refer to in the subject. Can you post the link to the information you write about so I can see what you are saying for myself? When you can do that, then beat me up for not reading.
-
i just got an ipod touch and downloaded itunes. when i plug my ipod into my computer itunes doesnt read my ipod. i looked it up in 'help' in itunes and it said if itunes doesnt read your device to click on 'device' and hit add. but i dont see a 'device' button anywhere. can anybody help m eplease?
Start here:
iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows
or
iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X -
What is the proper way to convert a VHD from dynamic to basic without losing data?
Hi,
What is the proper way to convert a VHD from dynamic to basic without losing data?
Our VM is running Windows Server 2008 R2 SP1
Thanks in advancedHi efebo,
"After you convert a basic disk to a dynamic disk, you cannot change the dynamic volumes back to partitions. Instead, you must delete all dynamic volumes on the disk and then use the
Convert To Basic Disk command. If you want to keep your data, you must first back it up or move it to another volume. "
Please refer to following link:
http://technet.microsoft.com/en-us/library/cc731274.aspx
You can try to backup the dynamic volume via Windows Server Backup then restore it to a new basic VHD file ( the space is recommended to be larger than or equal to the old one ) .
Hope it helps
Best Regards
Elton Ji
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
Please ship future iPod Shuffles with Shuffle Mode TURNED OFF
I just got my iPod and loaded it full of podcasts. It kept flashing orange indicating that it was empty. I spent more than 4 frustrating hours restoring, reloading, reading, forums etc etc.
Finally, I found a post that said the iPod will not play Podcasts when switched to shuffle mode. WHY NOT! Man! That was frustrating. At least it works now... like a charm.
Apple,
Please ship future iPods with Shuffle turned off and/or mention this issue in the quick reference cards and the .pdf manual so that others don't waste hours because of this quirk.
ThanksThanks, 0Ari0
I looked again at the .pdf and insert and still found nothing mentioning podcasts not playing in shuffle mode.
I suppose that I am once again the exceptional user in that I only loaded podcasts onto it and could not get them to play until researching the "problem/feature" regarding podcasts and shuffle mode.
I realize that podcasts are something that you typically don't want played randomly. I do want them to play in an order. However I want them to play in an order that I specify. I have tried creating playlists, dragging each file individually to the iPod to get them in an order I want. Regardless of how I intertwine different episodes of different shows for a varied playlist the iPod somehow groups them, I believe, by release date.
sadly they also get played backwards from most recent to the oldest regardless of how I load them. I want to listen from oldest to newest. Another, quirk that doesn't work for me personally. But, that is something I still have to research and figure out. I'm hopeful that it can do that.
Anyway, thanks for responding. I have reading to do. -
How to sync music on my Itouch without losing data/songs?
I have read plenty of answers saying to allow a transfer or move all the music from old computer to new one. I don't have that option. My old computer is dead, I tried to get this new one before it died but I wasn't able to. Now I'm afraid that by syncing my ipod with my new computer I'll lose everything... which I'd rather not.
Please help, thanks.See:
Syncing to a "New" Computer or replacing a "crashed" Hard Drive: Apple Support Communities
Sync Your iOS Device with a New Computer Without Losing Data - How-To Geek
newer copy -
Regarding : Material document data and PO data do not match (Plant)
Hi Gurus,
Please go through this BAPI program.
While uploading it is giving an error ' Material document data and PO data do not match (Plant) '.
Please help regarding this issue.For all Other moment types it is working fine except this 351 moment type.
dATA: i_excel TYPE truxs_t_text_data. "work table for excel upload
DATA: BEGIN OF it_itab OCCURS 100,
docdate(10),
postdate(10),
mvt_type(3), "Movement Type
plant(4), "Plant
lgort(4),
pur_doc(10), "Purchase Document No
po_item(3), "Purchase Document Item No
material(18), "Material Number
delnote(16),
erfmg(13),
uom(3),
lfmng(13), "Quantity
batch(10) TYPE c,
vfdat TYPE vfdat,
END OF it_itab.
DATA: it_goodsmvt_head TYPE TABLE OF bapi2017_gm_head_01 INITIAL SIZE 100,
it_goodsmvt_code TYPE TABLE OF bapi2017_gm_code INITIAL SIZE 100,
it_goodsmvt_item TYPE TABLE OF bapi2017_gm_item_create INITIAL SIZE 100.
DATA: wa_goodsmvt_head LIKE LINE OF it_goodsmvt_head,
wa_goodsmvt_code LIKE LINE OF it_goodsmvt_code,
wa_goodsmvt_item LIKE LINE OF it_goodsmvt_item.
DATA: w_mat_doc TYPE bapi2017_gm_head_ret-mat_doc,
w_year TYPE bapi2017_gm_head_ret-doc_year.
DATA: BEGIN OF it_errmsg_goodsmvt OCCURS 10.
INCLUDE STRUCTURE bapiret2.
DATA: END OF it_errmsg_goodsmvt.
DATA : obj_type LIKE bapiache09-obj_type,
obj_key LIKE bapiache09-obj_key,
obj_sys LIKE bapiache09-obj_sys.
DATA: v_date1 TYPE sy-datum.
DATA: v_date2 TYPE sy-datum.
DATA: w_lines TYPE i.
DATA: errflag.
SELECTION-SCREEN BEGIN OF BLOCK bk1 WITH FRAME TITLE text-100.
PARAMETERS: p_file TYPE rlgrap-filename.
SELECTION-SCREEN END OF BLOCK bk1.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
CALL FUNCTION 'F4_FILENAME'
EXPORTING
field_name = 'P_FILE'
IMPORTING
file_name = p_file.
Start-of-selection processing
START-OF-SELECTION.
CALL FUNCTION 'TEXT_CONVERT_XLS_TO_SAP'
EXPORTING
i_line_header = 'X'
i_tab_raw_data = i_excel
i_filename = p_file
TABLES
i_tab_converted_data = it_itab[]
EXCEPTIONS
conversion_failed = 1
OTHERS = 2.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
LOOP AT it_itab.
REFRESH it_goodsmvt_head.
REFRESH it_goodsmvt_item.
CONCATENATE it_itab-docdate6(4) it_itab-docdate3(2) it_itab-docdate+0(2) INTO v_date1.
CONCATENATE it_itab-postdate6(4) it_itab-postdate3(2) it_itab-postdate+0(2) INTO v_date2.
wa_goodsmvt_head-pstng_date = v_date2.
wa_goodsmvt_head-doc_date = v_date1.
wa_goodsmvt_head-ref_doc_no = it_itab-delnote.
wa_goodsmvt_head-pr_uname = sy-uname.
APPEND wa_goodsmvt_head TO it_goodsmvt_head.
Maintain it_goodsmvt_code
wa_goodsmvt_code-gm_code = '04'.
Maintain it_goodsmvt_item
*LOOP AT it_itab.
IF wa_goodsmvt_item-po_number IS INITIAL.
wa_goodsmvt_item-po_number = it_itab-pur_doc.
wa_goodsmvt_item-move_type = it_itab-mvt_type.
wa_goodsmvt_item-MOVE_PLANT = it_itab-plant.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
input = it_itab-material
IMPORTING
output = it_itab-material.
wa_goodsmvt_item-material = it_itab-material.
wa_goodsmvt_item-stge_loc = it_itab-lgort.
wa_goodsmvt_item-po_item = it_itab-po_item.
wa_goodsmvt_item-entry_qnt = it_itab-erfmg.
wa_goodsmvt_item-ENTRY_UOM_ISO = it_itab-uom.
wa_goodsmvt_item-po_pr_qnt = it_itab-lfmng.
wa_goodsmvt_item-batch = it_itab-batch.
wa_goodsmvt_item-expirydate = it_itab-vfdat.
wa_goodsmvt_item-NO_MORE_GR = 'X'.
wa_goodsmvt_item-mvt_ind = 'B'.
APPEND wa_goodsmvt_item TO it_goodsmvt_item.
CALL FUNCTION 'BAPI_GOODSMVT_CREATE'
EXPORTING
goodsmvt_header = wa_goodsmvt_head
goodsmvt_code = wa_goodsmvt_code
IMPORTING
materialdocument = w_mat_doc
TABLES
goodsmvt_item = it_goodsmvt_item
return = it_errmsg_goodsmvt.
Process of commit work
IF it_goodsmvt_head[] IS NOT INITIAL.
DESCRIBE TABLE it_goodsmvt_head LINES w_lines.
ENDIF.
IF it_goodsmvt_item[] IS NOT INITIAL.
DESCRIBE TABLE it_goodsmvt_item LINES w_lines.
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
EXPORTING
wait = 'X'.
IMPORTING
RETURN =
CLEAR errflag.
READ TABLE it_errmsg_goodsmvt INDEX 1.
IF it_errmsg_goodsmvt-type EQ 'E'.
WRITE:/'Error in function', it_errmsg_goodsmvt-message.
errflag = 'X'.
ELSE.
WRITE:/ it_errmsg_goodsmvt-message.
ENDIF.
IF errflag IS INITIAL.
COMMIT WORK AND WAIT.
IF sy-subrc NE 0.
WRITE:/ 'Error in updating'.
EXIT.
ELSE.
WRITE:/ 'Material Document created successfully and the Document Number for the Material',
wa_goodsmvt_item-material,'is:', w_mat_doc, w_year.
ENDIF.
ENDIF.
ENDIF.
ENDLOOP.Hey,
Just wanted to post that in my case this was the error of MVT_IND field in item table. When I made it from 'B' to blank then it worked.
Mine is solved....
Thanks -
Process Chain : Read PSA and Update Data Target in BI 7.0
Hello Experts,
In my Process Chain I have a variant Execute Infopackage to load the data only into PSA. then I have next variant as *Read PSA and Update Data Target*. my data target was a Master Data table Hierarchy
In the variant " Read PSA and Update Data Target". the selection Parameters were
PSA.Table : 0GLACCEXT_T011_HIER_BA1
Selection Object Type : same Infopackage in Varaint Execute Infopackage
the Error message was Variant doesnot contain a valid combination request/data target
I checked the PSA-Table using RSA1OLD Transaction then I find four PSA Tables:
0GLACCEXT_T011_HIER_BA1
0GLACCEXT_T011_HIER_BA2
0GLACCEXT_T011_HIER_BA3
0GLACCEXT_T011_HIER_BA4
All the requests are linked to PSA Table *0GLACCEXT_T011_HIER_BA4*.
I can't understand why there exists four PSA Tables?
I try to link the PSA-table 0GLACCEXT_T011_HIER_BA4 in the variant *Read PSA and Update Data Target and try to save it it raises short dump.
If I select 0GLACCEXT_T011_HIER_BA1 in the varaint I shouldn't face any problems.?
but the process chain raises an Error message Variant doesnot contain a valid combination request/data target with this variant.
How shall I handle this issue?
Please carify me the issues as soon as possible.
thanks in advance
Regards
sailekhaHello,
In the Variant Read PSA and Update Data Target I have to select the PSA Tabelle Name from the preselection list in the System it shows me all the four PSA Tables that I mentioned.
I can select any one of them. So I trieed with all the four PSA Tables in the list but I can selct only the XXXX......BA1 table then only I can save and include it in the PC. If I select the remaining tables BA2, BA3, BA4.........while I try to save the Variant it raises short dump.
I checked the PSA using the Transaction RSA1OLD under PSA...... I find 4 PSA Tables( I don't know whether they are PSA Tables or not but in the Variant it states that they are PSA Tables) in which all the requests are attached to BA4. only.
I observed that ony for Hierarchies I find four PSA tables for remaining one only one PSA table was available.
I totally confused how to handle this situation. any suggestions......... please help me to resolve this problem.
Thanks & Regards
Maybe you are looking for
-
HT1386 Why Won't my iPhone reflect updates to changes I've made to iTunes playlists on my PC?
When I first got my iPhone, I synced my music and playlists FROM the computer TO the phone. Worked fine. Now every sync makes my PC iTunes match the phone instead of the other way around. The sync only works in one direction & now has deleted some o
-
[java] java.io.UTFDataFormatException [java] at java.io.DataOutputStream.writeUTF(DataOutputStream.java:343) [java] at java.io.DataOutputStream.writeUTF(DataOutputStream.java:301) [java] at com.sun.jdori.fostore.FOStoreOutput.writeUTF(
-
Is there any way destroy a thread by name? For example I name a thread musicthread and then call musicthread.destroy().
-
Displaying a report with 250 000 rows in BI Publisher 11.1.1.6 == very slow
Hi, I try to display a report with 250 000 rows in bi publisher 11.1.1.6. Running the SQL Request in TOAD take 20s. From bi publisher 11.1.1.6 this operation take more than 2 hour without result. The temp file show an xml file which increase (53 M to
-
HT1925 Will I lose my music library when I am required to "uninstall" I-tunes ?
Why do I have to "uninstall" I-tunes for it to open? Will I lose my music library when required to do this?