Please read this on the Nokia Updater - Important ...

Hi All,
Well - it looks like you have really taken well to the new Nokia Software Updater. We can also see that there is a little bit of confusion about the service in its present state right now.
So... We got an email from the NSU team that gives a bit more info on the topic:
The Nokia Software Updater checks which software is available for your particular phone by comparing the software you currently have with latest software assigned to the 7 digit product code of your phone. If newer software is available for your 'variant', it will be downloaded.
In case the Nokia Software Updater says no new software is available but you believe this to be incorrect, please post your product code to these boards.
Many thanks for your help,
The Nokia Software Updater team
Your product code can be found on the label in the battery compartment (e.g. 0501234).
So, if you do run into problems, it would be a really great idea to let Nokia know what your product code is. If you find yourself needing to call or email Nokia on the topic - please include this code so that our support teams can get straight down to helping you out.
Please do not forget, the Discussion Board itself is not here to provide direct support, so if you have an issue and post here the NSU team may see it, but they will not be able to get back to you directly. If you need one to one support - please get in touch via phone or email.
Cheers
KarimMessage Edited by vandelay on 30-Oct-2007 02:12 PM

Greetings everyone.
I contacted Nokia Support, and they sent me some info on how to get support locally some days ago. However, I plugged my phone again today and voila! to my surprise, it detected the new firmware and right now that I'm typing, I am updating to the new version.
I'm not sure but I think I should thank Nokia Support for registering my Product Code and certainly for responding to my request in quite a short time.
I should also thank all the other guys who gave me help on this issue, specially scoopyman.

Similar Messages

My computer had to be wiped clean and I had to reinstall my Photoshop Elements 5. I keep getting this message: The Adobe Updater could not be started. Please reinstall the application and components.

My computer had to be wiped clean and I had to reinstall my Photoshop Elements 5. I keep getting this message: The Adobe Updater could not be started. Please reinstall the application and components.
I need to take care of this. I have reinstalled it 3 times and still get the same message.
Any suggestions?

Firefox is trying to update but it can't because Firefox is running
Open the task manager with Ctrl + Alt + delete. Click on the Processes tab and find firefox.exe. Click End process

Ipod not connecting again, apple please read this.

First let me state that I made posts awhile back about my Ipod touch not being able to be recognized by itunes at all and just as a camera by windows. Now every single guide did nothing to help and the FEW people that posted had posted things I already did that did not help.
HOWEVER the version of Itunes that was prior to the one I just downloaded connected PERFECTLY with no issues.
But I just updates and wouldnt you know it, the connection problem is BACK. Apple please read this, the last version of Itunes had something different with how it connected to the Ipod...PLEASE bring that back, its so inconvenient not being able to connect to my own Ipod
If someone wants to post a reply that might help feel free...but everything on this website and even a few others not posted here have not worked, this is mostly me praying that Apple reads it...that tiny difference on how it connected made a huge difference with my computer.

Thanks. I worked out a simpler method of turning off the internet access - just switching off my wireless modem. Either way, this works and with the PC not connected to the internet, all three Apple devies will sync.
Thinking about it now, I had a similar problem a few versions ago which I recognised because with Home Sharing on and connected to the internet iTunes was trying to find files from someone in another hotel room who also sharing the hotel's wireless network. My devices would not sync then either. This seemed to be resolved with subsequent itunes upgrades until now ....
Thanks for the advice. Let's hope Apple's next 'update' actually updates itunes so it can sync Apple devices whilst simultaneously connected to the internet (not a big ask really).

TS4083 My folders that message rules divert emails to don't update when I open Mail on my iPad or iPhone. Only the inbox does. I have to click on each folder for it to update. Is there a way around this? The folders update on my mac fine when i check mail

My folders that my message rules on iCloud divert emails to don't update when I open Mail on my iPad or iPhone. Only the inbox does. I have to click on each folder individually for it to update. A real pain as I have about 30 folders. Is there a way around this ? The folders update on my mac fine when i check mail without having to select each one of them. Can the iPad and iPhone do the same thing?

My Mac has 4 mail accounts coming into it, but you are correct, one of them is a POP account, (and unfortunately it is the main @ account, and is the one associated with my apple id, since we've had it for years). I couldn't figure out how to replace this with the Imap version, short of deleting that account entirely.
Is this what I have to do?
Thanks for your help!

HT1339 my ipod nano 7th generation....works fine as long as it's on the docking station. when off the station, the display goes dark after a few seconds. it's fully charged. please help. this is the heartbeat of my business. thanks

my ipod nano 7th generation....works fine as long as it's on the docking station. when off the station, the display goes dark after a few seconds. it's fully charged. please help. this is the heartbeat of my business. thanks

In the worst case, it's still under warranty (all 7th gen nanos are still under one year from purchase).
So, you disconnect it from power, and it almost immediately goes dead? You can try a Restore... but it doesn't sound like the type of problem a Restore will fix.
You should probably have it looked by Apple Tech Support. If there's an Apple Store nearby, you can take it to the store's Genius Bar. To avoid waiting, you can make a reservation at the store's web page
http://www.apple.com/retail/

Can any body please read this and ans me

hi all,
can any body please read this and tell is there any function module or some other thing is available.
Material masters are location specific, and Progistix maintains part details in Canadian $, now we need to get the logic how SAP converts the standard cost of the material from Canadian $ to US $
The plant number of Canada is 3002.

Hi
you would have to use the following function modules
CONVERT_TO_LOCAL_CURRENCY
CONVERT_TO_FOREIGN_CURRENCY
regards
Dinesh

This is the worst update , makes me want to get rid of iPhones .

This is the worst update , makes me want to get rid of my iphones

You can voice your displeasure with the iOS by leaving feedback at the appropriate subsection from the link below.
http://www.apple.com/feedback/

I'm unable to sync my contacts with the new iPhone 5 and my 2012 Hyundai Santa Fe. Will there be a fix for this in the next update?

I previously had an iPhone 4 synced and paired with my 2012 Hyundai Santa Fe and had no issues. Now I have a new iPhone 5 and am able to sync the phone but the contacts will not update in the phone book listing for the vehicle. I've tried several times to re-sync and pair the phone to the vehicle and still the same issue. I'm able to make an receive calls but no contact information is being displayed. From all of the previous community issues reported it's not an AT&T issue, Hyundai issue, it's clearly pointing at the device (iPhone 5) being the issue.
Will there be a fix for this in the next update?
Thank you.

Thanks for your response. However, after speaking with a level 2 Apple Advisor and Hyundai there is an issue that both companies are aware of and are working towards a resolution. Here's a blurb from Hyundai that was sent to me after I spoke with Apple Advisor:
"We apologize for any inconvenience associated with the technical issues with devices connected via Bluetooth. Hyundai is aware of the iPhone losing its Bluetooth connection to the vehicle along with any function associated with it at the time. Hyundai has been able to reproduce the concern in our test vehicles and have sent all necessary information to Apple engineers. Hyundai received confirmation from Apple that they will work on debugging.
If your iPhone is 3G, 4, 4S, 5 and has one of the following iOS: 6.0, 6.1.0, 6.1.1, 6.1.2, 6.1.3, 6.1.4 or higher, you may be affected." - Hyundai Engineering

Please Read This To Reduce or Eliminate Problems after Software Update

Hi all, I have been reading quite a handful of Mac users here reporting problems ranging from minor ones like slow downs to major ones like application crashes, and many of them blame the new OS and/or Security Updates.
Without learning more from the details of how did they perform their Software Updates and Install, I am making a huge assumption that it maybe something they did or didn't do, one of the key things they did not do is Repair Disk Permission
Below is what I called, the "ritual procedure" needed to perform before and after a Software Update, and also any other major software installation - to help reduce or eliminate "hiccups" afterwards, I cannot gaurantee that all macs all over the world will not suffer any problems after an update, but by doing so, you may help reduce it; I have 4 macs all together and so far I have not encounter any major problems after many versions updates.
Anyway, I didn't come out with this series of procedures, I read it off somewhere in this Discussion quite a while ago, and thought I share it again with all of you:
1.Before starting Software Update, unplug all external devices, FireWire, USB, hubs etc etc, not just turning them off but unplug the cables off your Mac, leave only your keyboard, mouse and internet connection on (unless you are using a wireless keyboard and/or mouse or on wireless internet)
2.Repair Disk Permission
3.Restart the Mac, then start your SU, do not run any other apps.
4.After finishing SU, restart your mac; If you are updating OS or Security Updates, Restart is required.
5.Repair Disk Permission again
6.Shutdown and re-plug in everything and start up your mac as normal.
I know the procedure is pretty long and "troublesome", especially the unplugging and restarting part, but so far it really has done my macs good, so I am going to "swear" by it... my FireWire, USB devices etc still work as normal.
This is really contrary to that "Macs are easy to use", yes, no doubt about it, but the software updates etc is just well, put it this way: The Mac OS when it comes to updates, is very very delicate... so handle with it great care, it will just turn out okay.
Cheers

Thank you for posting that. I posted a similar set of suggestions here:
http://www.macmaps.com/backup.html
Disclaimer: Reference to links I make to my Macmaps.com website are a for your information only type reference. I do not get any profit from this page, and it is open to the public.

Please read this before you load SECURITY UPDATE 2010-006

I've just spent 72 hours with frozen cursors and frozen screens - so far all directly related to security update 2010-006. After successfully using SuperDuper! to erase my Internal HD and load a 2+ week old system without security update 2010-006 I seem to be fine again.
OK I have so much share-free ware on my MBP-13" (May 2010) running 10.6.4 that maybe I'm the only one on the planet to see this - but there is a 214 PAGE post for MBP-15 and MPB-17's freezing -- prior to Security Update 2010-006 ------ related or not, don't know.
I believe I will actually get a duplicate MacBook Pro (or at least a MINI with the same chip/speed) so that I can keep one clean and experiment (i.e. download stuff) on the other. Then if a problem, my life doesn't stop. I realize that from banking to photos to news to work to reports to my balance sheet to SKYPE to eMail to....... wow, and in 1983 I just had my HP calculators!! These Macs just have to work!
Best of success and comments welcome here.
Steve
11 Oct 2010

Thanks for the feedback! I think my system is now "OK" (hours of checks, with Apple as well etc. etc.) but likely there was a conflict - and since I don't know what - and since I can't remove everything right now - if this keeps working I just won't install the security update 2010-006.
BUT will this sneak up on me in security update 2010-007 or ??? I kinda have to get to the bottom of this - am actually thinking of buying a second, almost identical Mac (or at least a somewhat cheaper MINI 2.4 gHz) to have some backup beyond my external drives (which saved me!)
Thanks again and any/all comments truly appreciated.
Best regards,
Steve Schulte
Monday 11 October 2010

Frequently Asked Questions (FAQ) BEFORE you post, PLEASE read this first

PLEASE READ ALL OF THIS POST BEFORE POSTING ON THE FORUM FOR THE FIRST TIME!
Welcome to the Creative Labs MP3 Players web forum!
This forum is for discussing issues related to the MP3 players (digital audio players) made by Creative Labs for those in the Americas, Europe and Asia Pacific . Although we're not going to turn away folks from other areas
The primary language of the forum is English, and posting in English is likely to get you a quicker response.
If your question does not relate to Creative MP3 players please find another more suitable forum to post in. If you want to discuss another player, or something not covered by another forum, please use the Off Topic forum.
CONTENTS
How to contact support
Hot topics
General issues
Before you ask your question
When you ask your question
After you ask your question
Low volume issue
Nomad Primer
Nomadness.net FAQs
More useful links
Wishlist and petitions
Suggesting changes
. How to Contact Support
Please note this is a peer forum and Creative's Support staff do not guarantee a reply here. If your issue is urgent, you are within your warranty period and/or you do not get a fast reply here you should contact Creative Labs Technical Support.
To contact support click the Support > Contact Customer Support link on this page.
When contacting Creative Support by email it's important to note that you must reply to the autoresponse email you first receive, as detailed in the email itself. Also make sure to check any spam trap you have on your email system if you have not received a reply.
It's also important if you feel that you have a bug or defect with your product to register that issue directly with support. Don't rely on the forum to raise awareness of an issue.
2. Hot Topics
This is dividied into 3 sections: General, Tag based players & USB mass storage players.
Make sure to also look at Section 3, which covers some of the other General Issues.
General
Where do I get the latest software, drivers and firmware?
Click the link Support > Downloads on this page.
In general, when installing on a new PC you need to download the driver, and some software to communicate with the player e.g. MediaSource, Media Explorer. For players using the v2.xx MTP/PlayForsure firmware drivers are not necessary, but you must have Windows XP and Windows Media Player 0 (this provides the MTP driver).
Important: Even though files are described as updates, none of the software requires a previous version to install. At worst they will prompt you to connect your player to verify you own a Creative product.
Note if you are downloading MediaSource make sure to download and install the relevant MediaSource plugin for your player. If MediaSource can't detect your player this is the first thing to check. For the v.xx PDE firmware the plugin is called the Creative Zen and NOMAD Jukebox plugin for Creative MediaSource , and for the v2 MTP/PlayForSure firmware it's called Creative MediaSource Plugin for PlaysForSure devices .
I am completely new to MP3 players, where should I start?
Have a read of my Nomad Primer, so called as Creative's MP3 player range tend to be prefixed with the word Nomad.
I think I have a bug, how can I check?
There's a known bug list hosted at my site here. If you want to add a bug then please
I have a wish request for the player, what can I do?
You can post it here (see the petitions listed in Section of this FAQ), email it to support, and/or add it to the public wishlist I host here by
I'm having connection problems with my player
If you can, the best test is to try your player with another PC, to see if you still have the problem. This localises whether the problem is with the PC (most likely the USB) or the player. See the link below (search on "connection problems") for a lot more troubleshooting on this.
What bit-rate should I encode my music at?
Ultimately it's down to your ears what bit-rate you prefer, and you should listen for yourself to determine it. If you ask on the forum you'll get many different opinions.
Make sure to look at the "MP3 vs. WMA" link below also.
How long should my battery last?
For the Zen and Nomad Jukebox players, to get some idea of how long your battery will last for a given bit-rate look at the battery curves thread. Ultimately battery life is dependent on how you use the player, make sure to follow the "why doesn't my battery last as long as expected?" link below.
How long does an RMA take?
Typically 2 weeks. But it might take a little longer, so don't start posting if it's 5 days.
I want to know how people feel about their Zen Micro/Touch/MuVo etc.
There's a long post titled Experience with your Creative player that has many posts from users about their players. Please search back for threads about specific players before starting a new thread.
Where can I buy online music or get legal downloads for my player?
See this thread.
My tracks don't play at the correct speed e.g. they play too slowly, why?
Chances are they are encoded in an unsupported sampling frequency. The tracks will need to be re-encoded at a supported bit-rate and/or frequency with something like Creative's MediaSource Audio Converter or dbPowerAmp.
Can a Creative player work on an Apple Mac?
It isn't officially supported, but some kind folks out there have written freeware applications to get your Creative player working with Macs. XNJB provides support for the Zen players, and requires OS X 0.3 or 0.4 (check the site for full details). MuVoHelper solves some problems with getting the MuVo to work optimally. The iTunes Zen plugin should support all Zen players. Note if the link to the plugin is broken just Google "iTunes Zen plugin" to find other sources. Also note there's no guarantee that these programs will work with the Mac, so if you have issues you should address your problems to the developer(s) of the relevant program.
Can a Creative player work on Linux?
Again it isn't officially supported, but again some kinds folks out there have written freeware applications to get your Creative player working. There's the Gnomad2 project. And don't forget the Linux forum at Nomadness.net if you are still having problems.
Tag Based Players
This section covers the players that use a hard disk and work using tags e.g. Zen Xtra, Touch, Micro, Sleek.
My Zen is not behaving properly, won't startup, or goes into rescue mode. What should I do?
If the Zen is not starting properly or not behaving correctly, first try to reset it. To reset all players except for the Zen Micro there is a small switch on the side of the player typically, that you should press using something like a bent paper clip. Don't use anything sharp. To reset the Zen Micro simply remove the battery and replace it.
If this doesn't work then access rescue mode, and try running a disk cleanup.
Next you should try reloading the firmware/OS, but beware if you are having connection problems also with your PC you may end up with a player that has no firmware and cannot be reloaded.
The last resort is to format the player. This will erase the contents from the player, including the content that ships with the player.
If none of these resolve the problem and you are under warranty you should get in contact with support to arrange replacement of the player.
If you aren't under warranty Creative will still repair the player, which you can arrange by contacting support.
How do I do a Disk Cleanup and/or access Rescue/Recovery Mode?
Refer to the sticky Rescue Mode thread. Disk Cleanup is accessed from this. Note that the MuVo players (with the exclusion of the MuVo? players) do not have Rescue Mode.
How long should a Disk Cleanup take?
It should only take a few minutes, and no longer than 30 minutes. Anything longer than this and there is a problem with the player and you need to contact Creative Support.
How long should a format take?
Only a few seconds. Anything more than a minute and there is a problem with the player and you need to contact Creative Support.
Although I can get into Rescue Mode, I can't select any option, or the options don't work?
If Rescue Mode is not working properly or commands can't be chosen the player is faulty. You need to contact Creative Support.
When are the Zen 20Gb/Neeon going to be released outside of the Asia Pacific region?
Due to popular request the Neeon is launched in the USA, but nowhere else for now. If you want the Neeon then contact your regions Customer Services to request it.
The Zen 20Gb is available from some shops in the USA and Europe e.g. Cambridge Soundworks, and Amazon.co.uk.
Is there a known issue with the Zen Micro headphone socket?
Creative Support have neither confirmed nor denied it officially. Some users have posted purported emails from Creative on the forum saying that the socket has been reinforced, but these have not been confirmed by Creative Support either. The exact incidence of the problem is unknown, but newer players seem to suffer less from it.
Should I buy the Zen Micro or Touch etc. and what colour should it be?
We can't tell you what player to get, or what colour it should be. Look at your collection size and the features of the player (see Nomadworld.com for the product pages) and decide yourself based on this.
Why does my Zen Micro battery drain so quickly?
The standby time (24 hours from turn-off) for the Zen Micro seems to use a lot more power than previous Zens. Creative have released both v (..0+) and v2 (2.20.05+) firmware that reduces the standby time to 4 hours. Make sure to update to one of these if you have a draining problem.
Also see JazzMC's detailed page on this problem.
Why is my Zen Micro/Touch Touchpad so sensiti've and/or difficult to use?
The Touchpads take some time to get used to.
continued below... Message Edited by SSR on 2-29-2005 04:03 PM

7. Low Volume issue
See here in the Zen FAQ at Nomadness.net.
If the firmware will not apply because it says the version number is the same use the Reload OS option, access to which is described in the relevant FAQ for your player below.
8. Nomad Primer
If you have ordered, or just bought a Nomad Jukebox, Zen, or MuVo?, consider reading the Nomad Primer.
It may be worth reading even for the more experienced User.
9. Nomadness.net FAQ's
General FAQ
Jukebox FAQ
Jukebox 2 FAQ
Jukebox 3 FAQ
Jukebox Zen FAQ
MuVo FAQ
Nomadness.net is the foremost peer site on the Web for the Nomad players on the Internet; with news, articles, web forum, download archi've, and more!
0. Some more useful links
Nomadworld.com - Creative Labs's International Nomad website (based in the USA)
Player Manuals - Downloads of digital manuals
Notmad Explorer - 3rd party software
Battery Uni'versity - very good, comprehensi've site on batteries
Chinese Support thread - with information on how to get chinese characters on your player
. Wishlists and petitions
Here are links to a number of general wishlist and petitions, so rather than starting your own you can add to those that already exist, or of course add your support for a feature you would like to see.
Also remember that the only collecti've public wishlist is maintained here at StainlessSteelRat.net (this is not affiliated with Creative Labs, but maintained by the author of this FAQ). There is also a bugs list here. So please
Wishlists
Zen Micro
Zen Micro (another)
MuVo Sports C00
MuVo N200
Petitions
AAC support
Lossless codec support
MP3 Pro support
Ogg Vorbis support
Audible support
Genre definable EQ
Gapless playback
Games support
Insert to queue
No "the" in Music Library
Open source firmware
Play count and ratings
TXT viewer
USB mass storage / dri've letter support
Track number duplicate checkAlbum art
Substring search
Dual firmware for both tag and dri've letter support
Rename "Reload OS" to "Erase OS"
Zen Micro alarm enhancements
Zen Micro always visible clockZen Micro Audible support
Zen Micro customisable standby time
Zen Micro EAX
Zen Micro radio enhancements
Zen Touch non-PlayForSure firmware with bug fixes
Zen Touch bookmarks
Zen Touch EAX support
Zen Touch random button changeZen Touch Audible support
2. Suggesting changes
To suggest changes to this FAQ please
Thanks for reading!

Please read this before you start a topic

Dear users of the SDN ITS forum!
Please provide the following basic information whenever you start a new topic thread to discuss your question/problem with other SDN users. By providing this information right from the beginning of your thread, you minimise the risk of any misunderstandings and other users can help you more quickly.
1) ITS Release
Please state which ITS release you are using! For the standalone ITS 6.20, please include the patchlevel version, SAP Note 550554 describes how to do this (earlier ITS releases are not supported anymore - please upgrade to the latest ITS releases first and check if your problem still exists). For the integrated ITS 6.40, please add the support package level and the kernel patch level of the SAP Web Application Server.
Until this information is provided, the community is unable to offer you proper help and you will very probably be asked for the information in the first reply.
2) Web browser
Please state which web browser(s) you use when the problem occurs. Please add the exact browser version and check if the problem also occurs in other web browsers. (Examples of browsers are: Internet Explorer 6, Mozilla 1.7.x, Firefox 1.0.x, Netscape 7.x)
3) R/3 Release
Thank you for helping other SDN users to help you!
As moderator of the forum, I may add other items/content to this posting later. The date in the subject line indicates when this topic was last updated. If you feel there is something missing or incorrect, please reply to this posting.
Thanks for reading!
Best regards,
Henning.

Welcome to the Internet Transaction Server Forum!
Please see our <a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/wiki">Wiki FAQ</a> and use the search before you post. More detailed <a href="https://wiki.sdn.sap.com/wiki/display/HOME/RulesofEngagement">rules of engagement</a>, can be found on the Wiki.
Happy posting!
The Community Team

Receiving Photo Messages; Please read this Apple.

Okay, I understand that I'm not going to get mms right now, but please change this!!!
There is no reason that the www.viewmessage.com url doesn't include the message id and password which would make my life and everyone else's way easier. Please just make the "Viewmymessage" template to something like www.viewmymessage.com/?MSGID=q21xddmfs&Pass=asdwsdf3 -- Even if it just fills the form fields on the viewmymessage.com site. ANYTHING would be better then trying to remember the most cryptic message id and password ever!

BarryPeterson wrote:
little more clout then I do.
First, it's a little more clout THAN I do.
Second, Apple chose to not have MMS. They really don't have any interest in contacting AT&T. If this is important to you, you can give AT&T feedback on their forums. If not, that's your choice, but then don't come here and complain.

MSI TV Tuners - Please Read This Topic First!

Welcome to the forum! If you are looking for help with your MSI TV tuner, this is a good place to start before posting. Look through the stickies below, and make good use of the Search function to see if your question has been answered already.
Can't find an answer? Then start a new topic of your own, don't just hijack someone elses. Give as much information as you can, look in the Suggestions on posting and getting better answers for advice.
Please bear in mind that this is a global forum, viewed by members from all over the world. Please make good use of the 'Location' field in your Profile, and please also state your TV signal type (eg PAL, NTSC) as well as source (aerial, cable, satellite). That should reduce chance of answers that are not really appropiate for your location.
MSI TV@nywhere Master PCI TV Tuner (MS8606)
MSI Product Support page - download drivers, manuals, software
MSI TV@nywhere MASTER PCI TV Tuner card FAQ
TV@nywhere Video OK, But sound loss after 40 sec (solved)
Vox USB Tuner
MSI Vox Box USB 2.0 TV Tuner FAQ
MSI Vox Power Supply...awesome!! PLEASE READ
Troubleshooting problems with hardware and MSIPVS
TV@nywhere Plus PCI
Problems with Windows Media Center
TV@nywhere Plus and Vista SP1
How to get audio from TV@nywhere Plus
TV@nywhere Plus remote issue solved!
TV@nywhere Plus - Vista Drivers required for remote control
TV@nywhere Plus and Windows 7
Theater 550PRO (PCI)
Theater 550PRO install issues
MegaSky 580 USB2
Mega Sky 580 and Windows Vista
Mega Sky 580 unavailable in MCE?
MSI MegaSky 580 Fix?
MegaSky 580 Installation Problems
Problems with MegaSky 580
New update for MegaSky 580
Weak reception from MegaSky, whats wrong?
Patches for PrestoPVR for MegaSky
DigiVOX USB2
DigiVOX and Windows XP x64 Edition
DigiVOX Mini II v3.0
DIGIVOX mini II V3.0 + Windows 7
Other useful topics
Windows XP Media Center Edition FAQ
Microsoft MPEG4 or DivX codec

I developed a program with php and mysql.in php file I am using applet tag to print out some informations.when I connected from client to the server.in that page I cant run applet.in client browser I have java plugin too.if I tried applets and also this print applet in my laptop it is working but if I put them into the server and if I connect from client applet isnt working problem is this.please someone help me

Guys I need help please read this and try to understand it

I want to know that what does a new driver has to do with modem that it makes noises like "click click" during the gameplay...
Right now i am using the old version that came with the box.It is 43.45 that has been released almost an year ago.Believe me guys it works almost perfect no noise and nothing.
If i come into 2004 then the latest version is 56.72 .I've heard that nVidia has uploaded this driver on april 1st (Happy fool day from nVidia). Thus guys i wish to come into this new year and i want to update my driver,and when i install this driver it will give me trouble from the modem. Couple of more things i have checked and they're the driver that came with the box is by DETONATOR and these days the drivers says FORCEWARE and the second thing is that the old software that comes in CD from nVidia doesnt contain "DIGITAL VIBRANCE" but all new drivers has it. Could this problem is from here? I am totally puzzled first i thought that there is something wrong with the graphic card but when i checked it was modem.When i changed the modem same problem.I changed the slot, same thing. Thought there is a virus or spyware but there was not.Hardware is ok because old version is working fine.
PLEASE GUYS I NEED ALL OF YOUR SUGGESTIONS DONT IGNORE MY PROBLEM
GRAPHIC CARD is MSI nVIDIA FX-5200
MB is MSI 865P-NEO
Modem is CONEXANT
One more thing i want to mention
if i turn on pc and start playing games(any 3D games) will run perfect on any driver whether it is new or oldest. But if i connect to internet with modem and later disconnect it and then start playing games or any 3D presentation the modem starts crying (CLICK CLICK) and this is the same sound that comes when we start connecting(dialing, probably when it gives signal) the internet.
In this situation i have to completely turn off my pc and also unplugging it (DISCHARGING ELECTRICITY). and then, when i turn on the pc and start any game without connecting to internet everything runs fine (On the new drivers)....
Now as i have mentioned before i changed the slots removed and even reinstalled.Nothing happens just a click click sound.
but for the old driver everything runs fine even if i am online and watching 3D presentations or playing games....
So anybody ????????????????????????

assuming its a pci one as he suggests it may well be an irq thing
try playing swap the pci slot with it
'

Please read this on the Nokia Updater - Important ...

Similar Messages

Maybe you are looking for