Please read this post

Hey Guys, I just wanted to share something with all of you, this forum does not get enough attention from the people who already know how to use the full strength of Java3D, and since there are so many unanswered questions here, and I'm sure most of them are solved by the authors them selfs, please do waste 5 min of your valuable time and post what you find as the best way to solve your problem, because we are here to help others as well, so please do.
and if any of the admins would please write this in nicer words and put it as a sticky or constant thread that would always stay first in the threads list, that would be great and most probably benefit us all.
Thanks in advance,
Adam Zehavi.

isn't there any admin to write something here to stay at the top of the page?? come on, this might really push people to post their solution for many problems, I mean look at the threads... most of them has NO replies, this does not make any sense these people didn't just gave up, they found a way and solved their problems, so I would not repeat myself I've made my point on the first post....

Similar Messages

Help! PLEASE read this post!!! Don't know what to do next?

Hi. When I'm asked to select a destination volume to intall the Mac OSX software, there is NO visible Hard Drive icon to select. I don't know what to do from this point??
But, let me back up a little... I stepped away from using my computer this morning and about an hour later started to hear an odd "repetitive motored clicking sound" coming from my home office. When I satiated my curiosity, I discovered the unknown noise coming from my G4 tower. Uh oh!?! Not good. When I went to use the mouse, everything was frozen. So I tried to manually reboot my computer. Not only did the odd noise not go away, but I was greeted by that wonderful "flashing file with the question mark" in the middle of a solid grey background on my monitor. I tried doing a soft boot while holding down the shift key, but NOTHING? I tried disconnecting the ethernet cable...NOTHING? Finally I tried inserting the Mac OSX Panther version 10.3 Install Disc while holding down the C key and opened the disc utility to try repairing the hard drive, but there is no visible Hard Drive icon on the left where there should be... shouldn't it be there?? Plus, when the install disc asks me to "Select a destination volume to install the Mac OSX software" there is nothing for me to chooses from. Shouldn't there be an icon of my Hard Drive here for me to choose? If this question has been asked before, please post the link if you know where to find it.
I don't want to reinstall the OSX if I absolutely don't have to. I just want that annoying clicking motor sound to go away and my computer back to normal working order.
Thank you for your time : )

Thanks for all the help roam!! You hear about hard drives crashing, but you never think it will happen to you, until it's too late. Unfortunately, that happened to me today... but, I bought an external hard drive a few months back and had backed up the majority of my important files at that time (THANK GOD!!). I had a ton of music on my iTunes, photos in my iPhoto, and TONS of favorite bookmarks organized in my Safari that I'm pretty sure were not backed up on my external harddrive (but at least all my graphic design files were saved on my external). I think I'll chalk this one up to the lesser of two evils and count my blessings. It could've been much worse than it is. Thanks again though for your assistance.
Take care,

Sorry all please read this post for my question I messed up i my other post

How do I make something print in tabular form like this:
Item Time Total
1 3 3
with the 1 left aligned under the I in Item the 3 left aligned under the T in Time and the other 3 left aligned under the T in Total ?

System.out.println("Purchase number\tTime before next purchase(months)\tTotal Customer Loyalty(months)");
System.out.println(purchase + "\t" + time + "\t" + total);
Here is what I have I am trying to get the value from the variable purchase to print out left aligned under the P in "Purchase number" and the value for the variable time to print out directly under the T in "Time before next purchase(months)" and the value for the variable total to print out directly underthe T in "Total Customer Loyalty(months)".
It should look like it has a column titled "Purchase number" , a column titled "Time before next purchase (months)" and another column titled "Total Customer Loyalty (months)" with all of the values from the variables aligned under each one of these headings like I described.

Re: Broadband Speed Problem? Please Read This & Post Requested Details

my broadband speed is so slow, we eventually got connected after 3 months and tens of phone calls and ever since the broadband is unusable!! phone the help line today and he tels me we have 2.7mbs and failed to understand that I don't!! we are only getting 0.2mbs download. please help me! i'm regretting switching from BT and will have no option but to switch back as customer service is terrible at EE. ADSL STATUSThis page shows information about your ADSL connection if applicable.Status
Configured Current Line Status --- SHOWTIME Link Type --- Interleaved Path Operation Mode Automatic G992.3(ADSL2) Data Rate Information
Stream Type Actual Data Rate Upstream 1005 (Kbps.) Downstream 283 (Kbps.) Defect/Failure Indication
Operation Data Upstream Downstream Noise Margin 6.4 dB 10.9 dB Line Attenuation 32.6 dB 52.5 dB Indicator Name Near End Indicator Far End Indicator Output Power 12.8 dBm 0.0 dBm Fast Path FEC Correction NA NA Interleaved Path FEC Correction 359 11 Fast Path CRC Error NA NA Interleaved Path CRC Error 0 0 Loss of Signal Defect 6 0 Fast Path HEC Error STR NA NA Interleaved Path HEC Error 0 0 Error Seconds 97 28 Statistics
Received Cells 8557 Transmitted Cells 4603

:
You should be syncing at about 4 Meg. The reason you are not is that the DLM system has put you on a banded profile in response to past errors on your line, the lowest of these Banded Profiles, altho' you now have no significant errors. You need to call EE to reset the DLM in order to remove any banding. However should significant errors persist the DLM will reapply banding.

Purpose of this Forum (Server General) *** Please Read Before Posting ***

Welcome to Windows Server General Forum !
This is an English TechNet forum, Please post your queries in English !
Scope:
The name "General" has a very broad significance and sometimes that might lead to some ambiguities.
The scope of this forum is to answer General "Server Administration" related queries pertaining
to Windows Server 2003, Windows Server 2008 / R2 and 2012 operating systems.
Again, "Server Administration" has innumerous aspects and at times it becomes bit difficult to categorize
them.
We try to answer your questions in General or provide troubleshooting support in depth as and when necessary
based on the context of the query.
Questions could be related to AD, GP, Server OS related Queries/issues/errors, general troubleshooting etc…
list is too huge and it's highly difficult to elaborate them here :-)
We understand that this scope and purpose can be a little confusing, we apologize for any confusion.
If you might not know the scope or purpose of this forum, we'll redirect you to read this thread if we need
to explain how this forum works.
Out of Scope:
Queries on following (but not limited to…) are Out of scope in this forum.
Scripting
SBS
- Small Business Server
IIS
Coding/Development:
Windows Client Operating Systems
Exchange
Server
Lync
TFS
SQL
server
Visual
Studio
.Net
SharePoint:
SCCM, SCOM
Third Party Applications
etc…
We might (but do not claim to) answer some of the out of scope questions directly here. If we do,
then it's just a Bonus ! and it's not the purpose or in the scope of what this forum provides.
Moving Threads:
It may happen that, your question might have been moved to this forum in an attempt by another moderator from
a different forum to help you find the correct forum or we might move your threads to an appropriate forum as and when necessary.
If a community member gave you the URL/link of a specific Technet forum, then you may request a move to that
specified forum (If a link to the forum category is specified; you'll still need to pick a specific forum from that category) or thread will be moved to the appropriate forum if a Moderator is around.
NOTE:
We cannot move a thread to another Microsoft forum that's not in the TechNet Forum System such as ASP.net,
IIS.net and Answers.Microsoft.com etc… So we can only provide links to those forums.
Marking Answers:
We propose a reply (such as a link about where to go ask your question) to a recent question as an answer,
and then we will usually wait one week (~7 days) before we mark it as the answer. We prefer you (the Asker/OP - Original Poster) to mark the answer, but we do not require it if you abandon the thread for a long time.
If you (the Asker/OP - Original Poster) refuse to let us propose and mark an answer (without telling us why
and helping us figure out the alternatives/workarounds), then we might need to lock a thread or move it to the Off Topic forum.
Please Read Before Posting:
How
to ask a question efficiently in TechNet forum
We have dedicated Server
Forums for different products/technologies, please consider posting your queries in appropriate forum for better help and support.
If you can't figure out where exactly to post your questions, please seek help in "Where
is the Forum For...?" forum and you will be given a URL/Link to an appropriate forum where you can post your questions.
Official
Microsoft Forum Sites
Credits:
Ed
Price - MSFT (Forum Owner)
This sticky has been created inspired by the Sticky on Where is the Forum for.. forum.
Regards, Santosh
MVP - Directory Services
I do not represent the organisation I work for, all the opinions expressed
here are my own.
This posting is provided "AS IS" with no warranties or guarantees and confers no rights.
Blog | Wiki
If you have issues with your account verification or you can not post images, please get your account verified
by posting request in below linked thread.
Verify Your Account 7

Something new (or not noticed by me before) then as this thread appears as normal discussion in
My Thread view.
Regards, Dave Patrick ....
New UI has this functionality i.e. if you reply on a sticky, it will appears as a 'Discussion' in thread view.
Regards, Santosh
I do not represent the organisation I work for, all the opinions expressed here, are my own and posted AS IS.

Ipod not connecting again, apple please read this.

First let me state that I made posts awhile back about my Ipod touch not being able to be recognized by itunes at all and just as a camera by windows. Now every single guide did nothing to help and the FEW people that posted had posted things I already did that did not help.
HOWEVER the version of Itunes that was prior to the one I just downloaded connected PERFECTLY with no issues.
But I just updates and wouldnt you know it, the connection problem is BACK. Apple please read this, the last version of Itunes had something different with how it connected to the Ipod...PLEASE bring that back, its so inconvenient not being able to connect to my own Ipod
If someone wants to post a reply that might help feel free...but everything on this website and even a few others not posted here have not worked, this is mostly me praying that Apple reads it...that tiny difference on how it connected made a huge difference with my computer.

Thanks. I worked out a simpler method of turning off the internet access - just switching off my wireless modem. Either way, this works and with the PC not connected to the internet, all three Apple devies will sync.
Thinking about it now, I had a similar problem a few versions ago which I recognised because with Home Sharing on and connected to the internet iTunes was trying to find files from someone in another hotel room who also sharing the hotel's wireless network. My devices would not sync then either. This seemed to be resolved with subsequent itunes upgrades until now ....
Thanks for the advice. Let's hope Apple's next 'update' actually updates itunes so it can sync Apple devices whilst simultaneously connected to the internet (not a big ask really).

Dear Hosts/Moderators: Can you please delete this post?

Hi-
I recently realized that when I google my name, the post I wrote at the end of a thread always shows up as one of the first few results on Google.
*Could a Host or Moderator please delete this post so it would stop showing up on google?*
It is the last post on this thread: http://discussions.apple.com/thread.jspa?threadID=1993994&tstart=0
I would be much obliged.

You're Again Welcome Sasha!
And I also suggest, that you should select Hide for your Name in Your Settings.
And be sure to click on the Save tab at the bottom of that page.
ali b

Can any body please read this and ans me

hi all,
can any body please read this and tell is there any function module or some other thing is available.
Material masters are location specific, and Progistix maintains part details in Canadian $, now we need to get the logic how SAP converts the standard cost of the material from Canadian $ to US $
The plant number of Canada is 3002.

Hi
you would have to use the following function modules
CONVERT_TO_LOCAL_CURRENCY
CONVERT_TO_FOREIGN_CURRENCY
regards
Dinesh

Frequently Asked Questions (FAQ) BEFORE you post, PLEASE read this first

PLEASE READ ALL OF THIS POST BEFORE POSTING ON THE FORUM FOR THE FIRST TIME!
Welcome to the Creative Labs MP3 Players web forum!
This forum is for discussing issues related to the MP3 players (digital audio players) made by Creative Labs for those in the Americas, Europe and Asia Pacific . Although we're not going to turn away folks from other areas
The primary language of the forum is English, and posting in English is likely to get you a quicker response.
If your question does not relate to Creative MP3 players please find another more suitable forum to post in. If you want to discuss another player, or something not covered by another forum, please use the Off Topic forum.
CONTENTS
How to contact support
Hot topics
General issues
Before you ask your question
When you ask your question
After you ask your question
Low volume issue
Nomad Primer
Nomadness.net FAQs
More useful links
Wishlist and petitions
Suggesting changes
. How to Contact Support
Please note this is a peer forum and Creative's Support staff do not guarantee a reply here. If your issue is urgent, you are within your warranty period and/or you do not get a fast reply here you should contact Creative Labs Technical Support.
To contact support click the Support > Contact Customer Support link on this page.
When contacting Creative Support by email it's important to note that you must reply to the autoresponse email you first receive, as detailed in the email itself. Also make sure to check any spam trap you have on your email system if you have not received a reply.
It's also important if you feel that you have a bug or defect with your product to register that issue directly with support. Don't rely on the forum to raise awareness of an issue.
2. Hot Topics
This is dividied into 3 sections: General, Tag based players & USB mass storage players.
Make sure to also look at Section 3, which covers some of the other General Issues.
General
Where do I get the latest software, drivers and firmware?
Click the link Support > Downloads on this page.
In general, when installing on a new PC you need to download the driver, and some software to communicate with the player e.g. MediaSource, Media Explorer. For players using the v2.xx MTP/PlayForsure firmware drivers are not necessary, but you must have Windows XP and Windows Media Player 0 (this provides the MTP driver).
Important: Even though files are described as updates, none of the software requires a previous version to install. At worst they will prompt you to connect your player to verify you own a Creative product.
Note if you are downloading MediaSource make sure to download and install the relevant MediaSource plugin for your player. If MediaSource can't detect your player this is the first thing to check. For the v.xx PDE firmware the plugin is called the Creative Zen and NOMAD Jukebox plugin for Creative MediaSource , and for the v2 MTP/PlayForSure firmware it's called Creative MediaSource Plugin for PlaysForSure devices .
I am completely new to MP3 players, where should I start?
Have a read of my Nomad Primer, so called as Creative's MP3 player range tend to be prefixed with the word Nomad.
I think I have a bug, how can I check?
There's a known bug list hosted at my site here. If you want to add a bug then please
I have a wish request for the player, what can I do?
You can post it here (see the petitions listed in Section of this FAQ), email it to support, and/or add it to the public wishlist I host here by
I'm having connection problems with my player
If you can, the best test is to try your player with another PC, to see if you still have the problem. This localises whether the problem is with the PC (most likely the USB) or the player. See the link below (search on "connection problems") for a lot more troubleshooting on this.
What bit-rate should I encode my music at?
Ultimately it's down to your ears what bit-rate you prefer, and you should listen for yourself to determine it. If you ask on the forum you'll get many different opinions.
Make sure to look at the "MP3 vs. WMA" link below also.
How long should my battery last?
For the Zen and Nomad Jukebox players, to get some idea of how long your battery will last for a given bit-rate look at the battery curves thread. Ultimately battery life is dependent on how you use the player, make sure to follow the "why doesn't my battery last as long as expected?" link below.
How long does an RMA take?
Typically 2 weeks. But it might take a little longer, so don't start posting if it's 5 days.
I want to know how people feel about their Zen Micro/Touch/MuVo etc.
There's a long post titled Experience with your Creative player that has many posts from users about their players. Please search back for threads about specific players before starting a new thread.
Where can I buy online music or get legal downloads for my player?
See this thread.
My tracks don't play at the correct speed e.g. they play too slowly, why?
Chances are they are encoded in an unsupported sampling frequency. The tracks will need to be re-encoded at a supported bit-rate and/or frequency with something like Creative's MediaSource Audio Converter or dbPowerAmp.
Can a Creative player work on an Apple Mac?
It isn't officially supported, but some kind folks out there have written freeware applications to get your Creative player working with Macs. XNJB provides support for the Zen players, and requires OS X 0.3 or 0.4 (check the site for full details). MuVoHelper solves some problems with getting the MuVo to work optimally. The iTunes Zen plugin should support all Zen players. Note if the link to the plugin is broken just Google "iTunes Zen plugin" to find other sources. Also note there's no guarantee that these programs will work with the Mac, so if you have issues you should address your problems to the developer(s) of the relevant program.
Can a Creative player work on Linux?
Again it isn't officially supported, but again some kinds folks out there have written freeware applications to get your Creative player working. There's the Gnomad2 project. And don't forget the Linux forum at Nomadness.net if you are still having problems.
Tag Based Players
This section covers the players that use a hard disk and work using tags e.g. Zen Xtra, Touch, Micro, Sleek.
My Zen is not behaving properly, won't startup, or goes into rescue mode. What should I do?
If the Zen is not starting properly or not behaving correctly, first try to reset it. To reset all players except for the Zen Micro there is a small switch on the side of the player typically, that you should press using something like a bent paper clip. Don't use anything sharp. To reset the Zen Micro simply remove the battery and replace it.
If this doesn't work then access rescue mode, and try running a disk cleanup.
Next you should try reloading the firmware/OS, but beware if you are having connection problems also with your PC you may end up with a player that has no firmware and cannot be reloaded.
The last resort is to format the player. This will erase the contents from the player, including the content that ships with the player.
If none of these resolve the problem and you are under warranty you should get in contact with support to arrange replacement of the player.
If you aren't under warranty Creative will still repair the player, which you can arrange by contacting support.
How do I do a Disk Cleanup and/or access Rescue/Recovery Mode?
Refer to the sticky Rescue Mode thread. Disk Cleanup is accessed from this. Note that the MuVo players (with the exclusion of the MuVo? players) do not have Rescue Mode.
How long should a Disk Cleanup take?
It should only take a few minutes, and no longer than 30 minutes. Anything longer than this and there is a problem with the player and you need to contact Creative Support.
How long should a format take?
Only a few seconds. Anything more than a minute and there is a problem with the player and you need to contact Creative Support.
Although I can get into Rescue Mode, I can't select any option, or the options don't work?
If Rescue Mode is not working properly or commands can't be chosen the player is faulty. You need to contact Creative Support.
When are the Zen 20Gb/Neeon going to be released outside of the Asia Pacific region?
Due to popular request the Neeon is launched in the USA, but nowhere else for now. If you want the Neeon then contact your regions Customer Services to request it.
The Zen 20Gb is available from some shops in the USA and Europe e.g. Cambridge Soundworks, and Amazon.co.uk.
Is there a known issue with the Zen Micro headphone socket?
Creative Support have neither confirmed nor denied it officially. Some users have posted purported emails from Creative on the forum saying that the socket has been reinforced, but these have not been confirmed by Creative Support either. The exact incidence of the problem is unknown, but newer players seem to suffer less from it.
Should I buy the Zen Micro or Touch etc. and what colour should it be?
We can't tell you what player to get, or what colour it should be. Look at your collection size and the features of the player (see Nomadworld.com for the product pages) and decide yourself based on this.
Why does my Zen Micro battery drain so quickly?
The standby time (24 hours from turn-off) for the Zen Micro seems to use a lot more power than previous Zens. Creative have released both v (..0+) and v2 (2.20.05+) firmware that reduces the standby time to 4 hours. Make sure to update to one of these if you have a draining problem.
Also see JazzMC's detailed page on this problem.
Why is my Zen Micro/Touch Touchpad so sensiti've and/or difficult to use?
The Touchpads take some time to get used to.
continued below... Message Edited by SSR on 2-29-2005 04:03 PM

7. Low Volume issue
See here in the Zen FAQ at Nomadness.net.
If the firmware will not apply because it says the version number is the same use the Reload OS option, access to which is described in the relevant FAQ for your player below.
8. Nomad Primer
If you have ordered, or just bought a Nomad Jukebox, Zen, or MuVo?, consider reading the Nomad Primer.
It may be worth reading even for the more experienced User.
9. Nomadness.net FAQ's
General FAQ
Jukebox FAQ
Jukebox 2 FAQ
Jukebox 3 FAQ
Jukebox Zen FAQ
MuVo FAQ
Nomadness.net is the foremost peer site on the Web for the Nomad players on the Internet; with news, articles, web forum, download archi've, and more!
0. Some more useful links
Nomadworld.com - Creative Labs's International Nomad website (based in the USA)
Player Manuals - Downloads of digital manuals
Notmad Explorer - 3rd party software
Battery Uni'versity - very good, comprehensi've site on batteries
Chinese Support thread - with information on how to get chinese characters on your player
. Wishlists and petitions
Here are links to a number of general wishlist and petitions, so rather than starting your own you can add to those that already exist, or of course add your support for a feature you would like to see.
Also remember that the only collecti've public wishlist is maintained here at StainlessSteelRat.net (this is not affiliated with Creative Labs, but maintained by the author of this FAQ). There is also a bugs list here. So please
Wishlists
Zen Micro
Zen Micro (another)
MuVo Sports C00
MuVo N200
Petitions
AAC support
Lossless codec support
MP3 Pro support
Ogg Vorbis support
Audible support
Genre definable EQ
Gapless playback
Games support
Insert to queue
No "the" in Music Library
Open source firmware
Play count and ratings
TXT viewer
USB mass storage / dri've letter support
Track number duplicate checkAlbum art
Substring search
Dual firmware for both tag and dri've letter support
Rename "Reload OS" to "Erase OS"
Zen Micro alarm enhancements
Zen Micro always visible clockZen Micro Audible support
Zen Micro customisable standby time
Zen Micro EAX
Zen Micro radio enhancements
Zen Touch non-PlayForSure firmware with bug fixes
Zen Touch bookmarks
Zen Touch EAX support
Zen Touch random button changeZen Touch Audible support
2. Suggesting changes
To suggest changes to this FAQ please
Thanks for reading!

Please read this before posting?

First of all we need your stats so we can determine if or not their is an issue:
Please use this link http://192.168.1.254 to go to your hubs homepage:
(Heres the direct link! http://192.168.1.254/index.cgi?active_page=9116 )
Then click on Settings:
Then go to Advanced Settings:
then go to Broadband:
then go to Connection:
and then please copy and paste your adsl stats making sure you expand to show all details:
We need to determine whether you have a throughput or speed or IP profile issue, there is only one official speed tester that BT will accept for speed test and you need to go to http://www.speedtester.bt.com and then type click on the ADSL/FTTC option:
and then type in your phone number, wait for the results to be displayed:
and once the results have been displayed with your IP Profile please copy and paste the results to your post.
Also searching your exchange on http://www.samknows.com/broadband/exchange_search , this is not neccessary but can sometimes help.
Always make sure you try changing the filters this can be a common problem. If you have a mastersocket with a split front then unscrew the bottom bit and behind there should be a hidden test socket, you usually should try to test your broadband in there to make sure your internal wiring ins't causing interference this can be one of the highest common factors of slow broadband. Usually your broadband will be dependant on your line length from the exchange which will be based on your attenuation, so if your far from the exchange your not likely to get a great speed on ADSL.
Also dialling 17070 and pressing Option 2 to do a quiet line test will show if you have any noise on your line. If there's any noise on your line, try changing your filter's first and then call (0800 800) 151 and report a line fault don't mention broadband and go from there.
Happy posting!
Regards Edd
Check your Line
BT Speedtester

Although I appreciate the sentiments and would speed the initial diagnosis. I do feel it would put some members off, in particular ones who have had a issue for some time and more so customers who have had the "helpline" experience and have been passed pillar to post. Being directed to another link comes across for me, as a bit "helpline". I feel at this point, many would want some 1 to 1 (therapy) and they are being listened too with regards to there broadband issue.
I've seen users irate very recently, just by a simple request of hub stats posted by copy & paste. We all do it, however it can come across, corporate avoidance (helpline). At times I have PM, something similar with regards to our end responsibilities, depending how I believe, they are presenting themselves on the forum
Mortgage Advisor 2000-2008
Green Energy Advisor 2008-2010
Charity Health Care Provider Advisor 2010-
I'm alright Jack....

Please read this on the Nokia Updater - Important ...

Hi All,
Well - it looks like you have really taken well to the new Nokia Software Updater. We can also see that there is a little bit of confusion about the service in its present state right now.
So... We got an email from the NSU team that gives a bit more info on the topic:
The Nokia Software Updater checks which software is available for your particular phone by comparing the software you currently have with latest software assigned to the 7 digit product code of your phone. If newer software is available for your 'variant', it will be downloaded.
In case the Nokia Software Updater says no new software is available but you believe this to be incorrect, please post your product code to these boards.
Many thanks for your help,
The Nokia Software Updater team
Your product code can be found on the label in the battery compartment (e.g. 0501234).
So, if you do run into problems, it would be a really great idea to let Nokia know what your product code is. If you find yourself needing to call or email Nokia on the topic - please include this code so that our support teams can get straight down to helping you out.
Please do not forget, the Discussion Board itself is not here to provide direct support, so if you have an issue and post here the NSU team may see it, but they will not be able to get back to you directly. If you need one to one support - please get in touch via phone or email.
Cheers
KarimMessage Edited by vandelay on 30-Oct-2007 02:12 PM

Greetings everyone.
I contacted Nokia Support, and they sent me some info on how to get support locally some days ago. However, I plugged my phone again today and voila! to my surprise, it detected the new firmware and right now that I'm typing, I am updating to the new version.
I'm not sure but I think I should thank Nokia Support for registering my Product Code and certainly for responding to my request in quite a short time.
I should also thank all the other guys who gave me help on this issue, specially scoopyman.

Free OES help available. Please read before posting.

Welcome to the OES Linux Storage and Backup forum.
Here is a list of free OES resources to help you answer your questions and resolve your issues.
Current OES Documentation
Recent Technical Information Documents (TID) - Open Enterprise Server
Open Enterprise Server Cool Solutions | Novell User Communities
Open Enterprise Server Wiki
The Novell Knowledgebase
Open Enterprise Server Product page
Novell Consulting Best Practices Guide: Automated Installation, Configuration, and Update for OES 11
You may be entitled to free installation support within thirty days of purchasing the product or you may be able to open a Service Request to obtain help with your issue at no additional cost if you have purchased maintenance and it is still current. Please refer to the following to see if you are eligible.
Support: Submit a Service Request: Details
Customer Center
Novell Services
If you still require assistance from our forum volunteers, I encourage you to read the Novell Forums FAQ for posting guidelines. Be sure to post in the appropriate forum.
These are the OES: Linux sub-forums: Administration, Install, Networking, Printing, Storage and Backup, Linux Web Services, and, Domain Services for Windows.
If you know or suspect you have a Linux issue, you may find the help you seek in one of the SUSE Linux Enterprise Server forums.
In addition to any other information you feel is relevant, please include the following with your post using [CODE] tags (i.e. the # formatting option) to make the output more readable:
The exact error messages, if any, as they are shown. (You may find other messages and clues in the log files located in /var/log, especially in /var/log/messages.)
Output from these commands run from a command prompt.
cat /etc/*release
uname -a
Note: Do not reply to this post as this thread has been closed. If you have any comments, or wish to report an issue concerning this post, create a new thread in Feedback About These Forums and be sure to refer to this forum.

I can understand your point of view and I respect it in regards to Small Basic being a learning language. None the less, let me make a suggestion that would be more ageeable, I think, to different kinds of people. Why not make different versions
of this new language: version 1 for beginners that I heard would be out by the end of this year,
version 2 for intermediates and version 3 for more advanced programmers. All this would culminate to the Visual Basic language. These 3 versions would smoothe out the gap between SB and Visual Basic. Your new programmers would
evolve at the same time your versions would come out and Microsoft would have a long term policy of loyal programmers.

Please read this before you start a topic

Dear users of the SDN ITS forum!
Please provide the following basic information whenever you start a new topic thread to discuss your question/problem with other SDN users. By providing this information right from the beginning of your thread, you minimise the risk of any misunderstandings and other users can help you more quickly.
1) ITS Release
Please state which ITS release you are using! For the standalone ITS 6.20, please include the patchlevel version, SAP Note 550554 describes how to do this (earlier ITS releases are not supported anymore - please upgrade to the latest ITS releases first and check if your problem still exists). For the integrated ITS 6.40, please add the support package level and the kernel patch level of the SAP Web Application Server.
Until this information is provided, the community is unable to offer you proper help and you will very probably be asked for the information in the first reply.
2) Web browser
Please state which web browser(s) you use when the problem occurs. Please add the exact browser version and check if the problem also occurs in other web browsers. (Examples of browsers are: Internet Explorer 6, Mozilla 1.7.x, Firefox 1.0.x, Netscape 7.x)
3) R/3 Release
Thank you for helping other SDN users to help you!
As moderator of the forum, I may add other items/content to this posting later. The date in the subject line indicates when this topic was last updated. If you feel there is something missing or incorrect, please reply to this posting.
Thanks for reading!
Best regards,
Henning.

Welcome to the Internet Transaction Server Forum!
Please see our <a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/wiki">Wiki FAQ</a> and use the search before you post. More detailed <a href="https://wiki.sdn.sap.com/wiki/display/HOME/RulesofEngagement">rules of engagement</a>, can be found on the Wiki.
Happy posting!
The Community Team

MSI TV Tuners - Please Read This Topic First!

Welcome to the forum! If you are looking for help with your MSI TV tuner, this is a good place to start before posting. Look through the stickies below, and make good use of the Search function to see if your question has been answered already.
Can't find an answer? Then start a new topic of your own, don't just hijack someone elses. Give as much information as you can, look in the Suggestions on posting and getting better answers for advice.
Please bear in mind that this is a global forum, viewed by members from all over the world. Please make good use of the 'Location' field in your Profile, and please also state your TV signal type (eg PAL, NTSC) as well as source (aerial, cable, satellite). That should reduce chance of answers that are not really appropiate for your location.
MSI TV@nywhere Master PCI TV Tuner (MS8606)
MSI Product Support page - download drivers, manuals, software
MSI TV@nywhere MASTER PCI TV Tuner card FAQ
TV@nywhere Video OK, But sound loss after 40 sec (solved)
Vox USB Tuner
MSI Vox Box USB 2.0 TV Tuner FAQ
MSI Vox Power Supply...awesome!! PLEASE READ
Troubleshooting problems with hardware and MSIPVS
TV@nywhere Plus PCI
Problems with Windows Media Center
TV@nywhere Plus and Vista SP1
How to get audio from TV@nywhere Plus
TV@nywhere Plus remote issue solved!
TV@nywhere Plus - Vista Drivers required for remote control
TV@nywhere Plus and Windows 7
Theater 550PRO (PCI)
Theater 550PRO install issues
MegaSky 580 USB2
Mega Sky 580 and Windows Vista
Mega Sky 580 unavailable in MCE?
MSI MegaSky 580 Fix?
MegaSky 580 Installation Problems
Problems with MegaSky 580
New update for MegaSky 580
Weak reception from MegaSky, whats wrong?
Patches for PrestoPVR for MegaSky
DigiVOX USB2
DigiVOX and Windows XP x64 Edition
DigiVOX Mini II v3.0
DIGIVOX mini II V3.0 + Windows 7
Other useful topics
Windows XP Media Center Edition FAQ
Microsoft MPEG4 or DivX codec

I developed a program with php and mysql.in php file I am using applet tag to print out some informations.when I connected from client to the server.in that page I cant run applet.in client browser I have java plugin too.if I tried applets and also this print applet in my laptop it is working but if I put them into the server and if I connect from client applet isnt working problem is this.please someone help me

Would an Adobe Staff Person please read this?

I'm wondering why Adobe has never fixed a problem that has been frustrating to me and other users for years. If you try to use the Upload button in the Files panel to upload a file to your website you frequently get a Waiting for Server message and the upload often times out.
If I do the identical task at the same time in Transmit, the file uploads in a few seconds.
I've drawn attention to this problem several times, both in this forum and by posting Bug Reports to Adobe.
So far, year after year, the problem has not been fixed.
If there's a staff person who reads this, would you please find out whether or not this defect is ever going to be fixed?

Thanks for your help. I'm aware that Passive is the best connection.
I sent a bug report to Adobe and, to my suprise, got a reply. But the workaround is disappointing. It basically says "wait longer".
We would like to let you know that we are aware of this issue and have an internal bug # 3561917 for this. We are working to prioritize it for fixing.
Please try the steps mentioned below:
1.       Launch Dreamweaver CC
2.       Go to menu “Dreamweaver -> Preferences…” to open the “Preferences” dialog
3.       Go to “Site” category in “Preferences” dialog
4.       Increase the value of “FTP time out” from 30 seconds to a higher value, let us say 180 seconds
5.       Click “Apply” and the “Close”.
Now you can try out your FTP scenarios.

Please read this post

Similar Messages

Maybe you are looking for