Please recommand good OVM tutorial for Beginner?

Is there any good OVM tutorial for beginner. Please recommend.
I's like to understand the basic concepts and be able to start use OVM.
Thanks

http://itnewscast.com/underground-oracle-vm-manual

Similar Messages

Any good jsp tutorial for beginner?

Can anyone suggest me the good and simple tutorial site in jsp for me to start up jsp?

Here is the official tutorial: http://java.sun.com/javaee/5/docs/tutorial/doc/

Tutorial for beginner

can anyone give me some good tutorial links for developing Oracle Portal?

Here is the official tutorial: http://java.sun.com/javaee/5/docs/tutorial/doc/

Please specify good book names for forms6i and reports 6i

Please specify any best titles on forms 6i and reports 6i
along with authorname please.
Dont advise me to search in google or amazon, becoz i didnot get any best titles from that.
thaks in advance
prasanth a.s.

You will probably have to go to a 2nd hand book store for Developer 6i books. Since this is an old product, I don't think publishers still sell or reprint these books.

Please advise good RAID card for MSI 745 Ultra

I wish to add a RAID controller,
so that I may have a backup of my data drive
(IBM 40gb 7200rpm ATA100).
I have purchased an identical drive
that I want to use as a mirror ("RAID 1", I believe
this is called.
What RAID controllers would be the most compatible, fastest, and most reliable?
The drive will be doing some hard work, writing audio data while it is being received in Cakewalk SONAR.
So the write speed must be able to keep up with "real time."
Thank you so much for your advice!
Here is my setup:
MSI 745 Ultra (SiS 745 chipset)
AMD Athlon XP 2000+ CPU
512mb PC-333 DDR
ATi Radeon 8500
M-Audio Delta 44 & Audiophile 2496
Enermax 350w Power Supply Unit (do you think it's enough?)
Seagate 7200 20gb HD (WinXP on Primary Master IDE)
MAXTOR 20gb 5400rpm (Primary Slave)
SONY 52x CD-rom (secondary master)
... and ASUS 40x CD-RW (secondary slave)

3Ware makes the best IDE RAID controllers, hands down.
Basically, a 3Ware RAID controller is comparable to a SCSI RAID controller except that its IDE. Just about every other IDE RAID controller, the ones you find soldered on a motherboard in particular, is crap. Go 3ware, or don't go RAID at all. You won't regret it.

Looking for a good video tutorial for Final cut express?

Does anybody know where I can find one?
Possibly free, but definitely on video, I m just allergic to written tutorials and other books.
Thanks.

Hi Mathieu.
If you click on this hotlink you will find over 50 FREE video tutorials on FCE/FCP.
Many of them are for FCP BUT (most) also apply to FCE.
They can be downloaded so that you can use them whenever you want. (Allow about an hour to download them all - you have to do them one at a time).
I found some excellent tips in them.
http://www.rippletraining.com/engine/free_tutorials.html
Hope you find them as useful as I did.
Ian.

Request: step by step tutorial for beginner

I am new to spry and are very interested in learning more
about it.
I had a request of some very basic step by step instructions
how I can use the spry effects on a picture - for example i click
on the thumbnale and the original picture fades in - either above
the thumbnale or opening up on a seperate window(with maybe even
using a puff effect when clicking on the thumbnale)
just the very basic - barebone code that I have to add.
Thanks a lot

Fade/Appear Effect Explained:
This is from the effects spry demo:
Effects.
It is a simplified version of the first effect. You can
ignore the css for the most part.
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0
Transitional//EN"
http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">

<html xmlns="
http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html;
charset=iso-8859-1" />
<title>Spry Effects</title>
<script type="text/javascript"
src="../../includes/SpryEffects.js"></script>
</script>
<style type="text/css">

</style>
</head>
<body>
<div class="content_pane"
id="product_box"></div>
<div class="navigation_pane" id="effectsControls">
<div class="effectsTransport_1"
id="effectsTransport"><a href="#"
onclick="Spry.Effect.AppearFade('product_box', {duration:
1000, from: 100, to: 0, toggle: true});
ExampleHelpText('Makes an HTML element appear or fade
away.')" title="Appear">Appear / Fade</a></div>
</div>
</body>
</html>
First off this is the most important step
Include the SpryEffects.js file in the head tag.
<head>
<script type="text/javascript"
src="SpryEffects.js"></script>
</head>
Then add the div you want to apply the effect to.
<div class="content_pane" id="product_box"></div>
Here is the effect code
Spry.Effect.AppearFade('product_box', {duration: 1000, from:
100, to: 0, toggle: true});
the first argument is the div id of the div you want to apply
the effect to
the second is a hash of sorts that includes the duration of
the effect, the starting and ending alpha of the div and the toggle
a boolean if you want to toggle the effect. Meaning if true the
effect goes from 100 to 0 and then when you click it again it goes
from 0 to 100. False means that is starts out again at 100 with the
second click.
Hope that helps
--Tstrokes

Is there a good flash tutorial for a simple slide show?

Basically I want to create a very simple slide show just like
the one on the
main page at www.bv.com
Is there a article or something anywhere so I can learn how
to do this using
Flash? Also is there an article on how to create text that
flys in from the
left or right?
Best Regards,
Chris Jumonville
iMedia Web Design
503.277.3553

I googled "flash slideshow" and got 25,200,000 returns ;)
www.kirupa.com has one (loads external images)
and www.gotoandlearn.com might have one.
--> **Adobe Certified Expert**
--> www.mudbubble.com
--> www.keyframer.com
Chris Jumonville wrote:
> Basically I want to create a very simple slide show just
like the one on the
> main page at www.bv.com
>
> Is there a article or something anywhere so I can learn
how to do this using
> Flash? Also is there an article on how to create text
that flys in from the
> left or right?
>
>

A good tutorial for Oracle BI Publisher

Hi,
I am new to BI Publisher. I'm using JDeveloper 10.1.3.2 and want to build reports in it. I found BI Publisher a good tool for building reports, based on its features on OTN and now I want a good working tutorial for using it. Is there anything?
Thanks,
S/\EE|)

Hi Saeed, a good starting point would be the BI Publisher user guide. Please check the link for the documentation on the latest release: http://www.oracle.com/technology/documentation/bi_pub.html
Also when you install the desktop installation, you will find some sample template and XML data at - "C:\Program Files\Oracle\BI Publisher\BI Publisher Desktop\samples" or the path where you installed it.
In case you plan to use APIs, sample codes are available in the user guide. And if you are in EBS environment, I am sure you will like the blog link maintained by Tim on how to get started with APIs: http://blogs.oracle.com/xmlpublisher/newsItems/departments/xmlpForEBusinessSuite/2007/03/12

Please give good for learning sql and pl/sql site

Hi All,
please give good reference site for learning sql and pl/sql, your suggestion would be appreciated.

http://tahiti.oracle.com/
http://www.oracle.com/pls/db112/homepage?remark=tahiti
http://download.oracle.com/docs/cd/E11882_01/appdev.112/e10766/toc.htm
http://download.oracle.com/docs/cd/E11882_01/server.112/e17118/toc.htm
http://download.oracle.com/docs/cd/E11882_01/appdev.112/e17126/toc.htm

Please recommend a good tutorial for Regular expressions?

I have several PERL programs that I need to translate in to JAVA for performance reasons. Those programs heavily use Regular Expressions. I have an excellent knowledge about PERL Regular Expressions but know very little about Java Regular Expressions.
So Can any one of you recommend me a good tutorial for Java Regular Expressions.
Thankx In Advance
LRMK

Since you know regexs, the java.util.regex.Pattern class API is probably all you need, it pretty thoroughly documents Java's flavor, and the differences from PERL's flavor.

Where can I find a good tutorial for mobile game developement with J2ME ?

Hi All,
I'm completely new to J2ME programming. But I have past experience on J2SE developement. Now I would like to know that where can I find a good tutorial for mobile game developement with J2ME ?
I'll be very greatful if I can find a useful step-by-step tutorial (eg. "The Java Tutorial" for J2SE)
Please point me ot the direction.
Thanks
ZuriJAckshoT

ibook-widgets.com have a free tutorial book in the iBooks store. Search for "Create your first interactive book using iBooks Author" they also sell widgets.
I dont have any connection - I found their eBook in the store long ago and used it to learn more about iBA.
The best advice though, is be patient, go back over the process step by step, I cannot access the Help files for some reason.. but i am sure its in their.

Need good tutorial for J2EE

Hi All,
Can anyone help in out in finding a good tutorial for J2EE.
I wanted to have glimpses of this technology before delving deeply into it.
Also please suggest some good reference books on the same
Thanks
Ankush

I'm afraid there is no quick way of learning J2EE. Of all the people on this forum only a few have truly mastered the framework. I suggest you learn it step-by-step by following the tutorial. Read the introduction to give you a glimpse of the technology and then, dive in....
The way I learned it was by building a three-tier website based on Servlets, JSP and EJB. After a few days/weeks in hell, I had an overview of the technology. I suggest you do the same.
As for book suggestions : stick to the standards. You (almost) can't go wrong with Wrox or O'Reilly.
Success,
Mike

PLEASE HELP ME FIND A GOOD CAR PLUG FOR MY iPHONE

Alright guys, I have been through 3 different plugs to connect my iphone to my car to play music, and I am a bit ticked. So i figured I would ask the Apple Discussion Boards so you guys can tell me the best audio/charger combo for my iPhone. Here is what happened with each of my previous plugs...
The first one was just a regular ordinary headphone plug that plugged from my iphones headphone slot to my car's auxiliary slot. It worked for a while but then the audio only started coming out through the right side of my car speakers occasionally, and I know for sure it is not my car that made the problem because my radio and CD's play fine through both speakers.
The second one is a "Kensington LiquidAUX Auxiliary Car Kit with Remote for iPod and iPhone". First off the remote that it came with didn't work properly. But here comes the worse part that is so annoying. This problem got progressively worse by the way.... a lot of times the plug would think that it unplugged itself for some strange reason and the music would stop as well as the charging, but then 1 millisecond later it would think it was plugged back in, and although it starts charging again, the music doesn't play again until I press play. Don't tell me to make sure it is plugged in securely because trust me my friends, I have tried everything possible to get this to work. Keep in mind I am driving...so it is a very bad idea to be messing with my phone to press the play again. And lately it has been getting so bad that I actually have to unplug the plug from my iphone and then plug it back in and press play, which is incredibly annoying. This happens about once a minute OR MORE now a days. Also, it makes a really annoying "whirrling" sound whenever I am using it. By the way, I even turned Airplane mode on, and the exact same problems still happened. So a summary of this: this audio/charger combo is a failure.
My 3rd plug I decided to try a normal headphone to aux plug again like the first except this time by a better brand, Griffin. But oh wait, the exact same problem happened that the first one had.
Ok guys, so what I really want for you to do for me is PLEASE HELP ME FIND A GOOD CAR PLUG FOR MY iPHONE.
Here is what I am looking for in my plug:
Plays music through my car's speakers AND charges at the same time;
I would prefer if it wasn't an FM transmitter because those tend to lose audio quality compared to direct plugins, unless you know of an amazing FM transmitter where you don't lose audio quality;
And finally, I want my plug to ACTUALLY WORK WITHOUT GLITCHES
Also, it would be nice if the plug that you refer to me, you actually own, so I know that you have tested it out before and that it works great.
Any HELP would be very much appreciated, thank you.

i thought about going the same route you did, but when I started looking at the prices of everything, I decided it was a better idea to just get a new stereo that can play and charge my iPhone.
After a lot of comparing, looking and price checking, I decided to go with the Alpine IDA-X100. This is a media player only device (no cd player built in) and it has been great. It has an awesome interface and dial setup that let's you go through your music just as if it were on an iPod. It even has a small color screen that displays the album artwork for you. My car has a factory BOSE system in it and the Alpine head unit even managed to improve the sound quality. Go see you local alpine dealer (or best buy) and check it out. The supplied cable charges the phone and plays music too. Your iPhone will give you an error message when you plug it in, saying that the accessory was not designed for iPhone, but if you just click no it works great.

Please recommend personal finance software for Mac that allows month to month analysis of spending by categories. Quicken on a PC was good at this. Mint seems very limited.

Please recommend personal finance software for Mac that allows month to month analysis of spending by categories. Quicken on a PC was good at this. Mint seems very limited.

Quicken for Mac 2007 works just fine (and is said to be compatible with Mavericks). It is often denounced for not being "modern", but when something works, and does everything I want, I need a good reason to switch.
A few years ago (2011), I got that reason when I upgraded OSX and Quicken stopped working due to the absence of Rosetta. I switched to iBank. I used it for more than a year. It was cumbersome, they have no sense of a helpful user interface, but it "works". I found ONE feature that I liked: you can attach an image (or any file) to a register entry, so I can save receipts right with the register.
But when Intuit came out with the revised Quicken 2007 for Mountain Lion, I gladly went back. I found that being able to update stock prices right in the portfolio view (for those not automatically found online) was handy - in iBank you have to generate a report to see the holdings, and then you have to switch to a view of "Securities" then scroll down through that list to find your stock, then "edit" then change the price, then "Save" then go back to reports and re-generate the portfolio view. Also, if you enter a stock purchase in a Quicken register, the price you paid gets added to the price history for the stock (as of the date of the transaction). No such help in iBank. Most of the helpful UI features (like increasing the date with the + key) are glaringly missing in iBank. I find I am getting no more than about 3-4 keystrokes before having to move the mouse and click.
If you are considering sharing the app on an iPad, Quicken won't work, but I found that iBank for iPad doesn't work either. The interface is completely different from the Mac version, you can't do much with it, and if you have a stock whose price is $11.25 / share and sell 200 shares, you might find that $22.50 gets added to your cash in the account. (I actually made a few million dollars when it decided that 200 shares at $11.25 yielded $2,250,000.) Luckly, I received a refund for that app.
Depending on how the Mavericks switch goes, I hope to be able to stick with Quicken, but I am keeping my records up-to-date in both now, because I can live with iBank. I will just have to keep an eye on its arithmetic.

Please recommand good OVM tutorial for Beginner?

Similar Messages

Maybe you are looking for