Please recommended best SSD for T410s

I just bought a lightly used T410s with an HDD and the disk is really slow. It measures much slower than the than 2.5" 5400 RPM disk in my T61.  The general performance impression of this T410s is a step backwards from my older Thinkpads because of the slow load-times for all applications.
So what is the best SSD to install in a T410s.   I looks like the 1.8" market is limited compared to 2.5". 
(I recently installed a OCZ Agiity-3  240Gb (2.5" SSD) in a T500 that it is much faster than the Intel SSD that came factory installed in a friends T410s)  Does this mean that the best 1.8" drives are not equal to a SATA3 2.5" drive?
OCZ and Kingston have 1.8" 128Gb SATA2 models that are similar in specs, and the Kingston is about half the price ?
Any recommendations ?

I'm not up to speed, but if you find an older Intel X-18m, it will work.  While not as fast at the latest drives, it is MUCH faster than that hard drive.Your other choice is placcing a drive in the DVD bay.  I have 2 drives (1 hard drive and 1 SSD) in my T400.  I use an external blu-ray drive when I need an optical drive.
T61p, T400
formerly x23, x40

Similar Messages

  • Best SSD for T410 at the moment?

    Hi,
    short questions:
    What is the best/fastest SSD for a T410 at the moment that i can order from Lenovo?
    And if i dont order the ssd from lenovo but buy one from market what is the best that fits in the 410?
    T410 only supports 1,8" right? Are there any problems expected with a not lenovo certified ssd?
    And is there a list of the original manufacturer of the Lenovo SSD's so i can look for Tests?
    Thank you for your help!

    The T series will have SATA 3 controllers (420, 420s, and 520).
    Physical size doesn't matter for speed.
    1.8" should be every bit as fast as 2.5".
    The 3 things that modify speed are:
    -Capacity (bigger = faster)
    -Controller (some faster than others)
    -Connection (SATA 3 SSDs work slower in SATA 2 mode)
    I don't think that Intel will release 510's in 1.8", though that might change in time.
    Also, in terms of the T410s, the only thing you have to worry about is battery life. You can't have a 9-cell battery in the T410s but you can in the standard T410.
    You also need a 1.8" drive for the T410s IIRC whereas the T410 can take any 9.5 mm x 2.5" SSD you can throw at it (also, the T420s has will have a similar problem when it comes out since it's got a not-that-common 7mm bay but the T420 can take 9.5mm drives as normal.)

  • Please recommend best quad i7 & intel mb for PP cs5.5

    Please recommend best quad i7 & intel mb for PP cs5.5
    Looking for best bang for the buck. 6 sata drive connectors, usb3 also.
    doing mostly avchd. Utilizing software 2 drive raid0. Win 7 64bit. I usually convert my avchd footage to more editable formats before i edit them.

    Steve,
    I assume that you already have a single non-RAID OS disk in addition to the 2-disk aid0. If that's the case, I'd strongly recommend two additional disks and create a second aid0 array.
    If on the other hand the 2-disk aid0 are the only disks that you have (and used for absolutely everything including the OS and programs), then get at least three more disks: One single non-RAID disk for the OS and programs plus two identical disks and create a second aid0 array with that pair.
    With either of those configurations, if you are going to transcode AVCHD to a format with an intermediate codec, then you can get away with the "Budget" quad-core i5 system (however, I would change the 192-core GTX 550 Ti to a 336-core non-Ti GTX 560 since the prices for those two right now are closer together than the differences in performance between them). But if you're going to edit AVCHD directly in Premiere Pro CS5.5, you will need at least the "Economical" (i7-2600(K)) system in order to edit smoothly.
    Oh, I see that you are actually looking for an i7. In this case, then, unless you are willing to spend at least $1,000 just for the CPU and mobo, the only current choices would be in LGA 1155: the i7-2600, 2600K and 2700K. The non-K CPU is limited-overclockable (meaning that you'll get only 3.9GHz out of that CPU maximum) while the other two can be overclocked further (to 4.4GHz and up with most chips). The i7-3820 isn't on reseller shelves yet, but from what I read it should perform on a par with a slightly overclocked i7-2600K.
    For the motherboard, I'd recommend a Z68 board from Asus, MSI or Gigabyte. (Or, if you choose the i7-3820 when it begins shipping to resellers, your only feasible choices would be an X79 / LGA 2011 mobo from Asus or Intel since the X79 boards from Gigabyte suffer from quality issues with the VRMs used on those boards.) Keep in mind, however, that the lower-priced Z68 boards from the three brands are more difficult than pricier Z68 mobos to achieve a high stable overclock because the budget boards often lack manual CPU core voltage adjustments per se (they have only voltage offsets instead). Pricier Z68 mobos have fixed manual CPU voltage settings in addition to offsets.

  • Please recommend portable printer for MacBook Air

    Please recommend portable printer for MacBook Air...preferably budget but will consider investment for very good value and support. Ease of use is key.
    on the road but have access to Target, Best Buy type places. Thank you.

    The answer that "any"  printer from the popular vendors is simply not correct, however if you want a list of current compatible devices please click Printer and scanner software for Snow Leopard & Lion

  • What's the best SSD for a Macbook Pro 13" Mid 2010?

    Hello.
    I will upgrade my 2010 Macbook Pro. I need to know what's the best SSD for my Macbook Pro. I was thinking about those:
    - Kingston SSDNow V+200 (SVP200S37A/120G) - 120 GB
    - CRUCIAL SSD M4 128 GB
    - CORSAIR SSD  Force Series GS 128 GB
    - SAMSUNG SSD 840 Series Basic 2.5" - 120 GB (MZ-7TD120BW)
    - CRUCIAL SSD interno Crucial v4 - 128 GB
    Those are the easiest to find on Portugal.

    It is my understanding that SATA III is backwards compatible to SATA II so that should not be an issue for your selection process.
    As an aside, you might be interested to know that your MBP can now have 16 GB RAM installed.
    http://blog.macsales.com/16353-owc-announces-maxram-memory-upgrades-to-16gb-for- 2010-mac-mini-macbook-and-macbook-pro
    Ciao.

  • Best SSD for A T420 under $200

    Hi,
    I am bumbling between a T420 and a X220, mostly because the X220 has a smaller screen and I am not sure how well I will be able to adjust to that (I already wear glasses, so ...).
    Which is the best SSD for the T420 under $200? Almost any capacity above 100 GB should be fine for me since I plan to get an UltraBay and put the HDD there.
    Solved!
    Go to Solution.

    punjabimunda wrote:
    Any other brand than Crucial? I am more interested in the Intel series. Which Intel series should I be looking at? Like I said, I don't need mammoth sizes. Good speed is a +.
    The Intel 520 series is also highly regarded, as is the Samsung 830 series. They're all good. You could do a Google search for reviews and comparison tests but I suspect you'll be happy with any of these.
    Cheers... Dorian Hausman
    X1C2, TPT2, T430s, SL500, X61s, T60p, A21p, 770, 760ED... 5160, 5150... S360/30

  • Best SSD For t400

    Hey all,
    We have been starting to replace alot of the old hdd with sdd for our thinkpads and have ran into alittle trouble with some of the ocz agility 2 and the ocz vertex 2 ssd drives being bad,  My question is what SSD drive is most compatible with the t400, t420s and the x100e laptops.  we are looking for hi iops.  Any Suggestions would be wonderful.
    Thank you

    I have a Crucial C300 (CTFDDAC256MAG-1G1) in my T60 for the last 18 months and have been very happy with it.  It is the 256GB which was purchased from MicroCenter in metro Detroit for $600.  It is now about $400.  I might also ad that I have the highest opinion of Crucial RAM and their service.  I have puchased all of my RAM from them directily via their website.
    Here is a recent post from the forum.thinkpads.com: 
    Best SSD for ThinkPads:
    Intel (X25-V/M/E, 310, 320, 510), Crucial/Micron (C300, m4), and Samsung (470, 830) models are currently the most reliable brands to get.
    If you can't get any of those, steer clear of SATA 6Gb/s SandForce drives and OCZ in general. (The older generation of SandForce drives are more reliable than the new ones are.)
    ThinkPad T530 2359-CTO i7-3520M (up to 3.60 GHz) 16GB RAM, 250GB Samsung 840 SSD, 15.6" 1600 x 900 LED, NVIDIA NVS 5400M Graphics with Optimus Technology
    ThinkPad T60 8744-5BU
    T7200(2GHz), 4GB RAM, 256GB Crucial C-300 SSD HD, 15.4in 1680x1050 LCD, 256MB ATI MOBILITY FireGL V5250, CDRW/DVDRW, Win7 Ultimate 32bit

  • Best ssd for mini 210-4000 n2800

    best ssd for hp mini 210-4000 in terms of ideal specs for what it mite be capable of handling such as read and write speed.

    I know this is some time ago yet some one looking for same answer might find this useful.  I find reviews about SSDs - one for example is : http://ssd.userbenchmark.com/ it describes - Samsung 850 Pro 256GB as best performer - Compares several SSD to others. Therefore hard to write without buying many and testing.

  • As of 2015: Best SSD for 9,2 Macbook Pro (mid-2012 non Retina)

    Hi All, this is my first post in the community, so I apologize ahead of time if it is evident in my query.
    I currently purchased a Mid-2012 Macbook Pro Non Retina. Model ID: MacBookPro9,2.(i7, 2.9 GHz)
    My question is: as of today (April 2015) what is the best SSD available (around 500GB in size) for my specific laptop? I've searched quite a few communities and just around Google and have found numerous options that people swear by and the same options that people swear against. What's been difficult is a lot of the posts were created much earlier on (which is expected for a MBP from 2012). I have read good (and bad) things about Samsung 840, 850 pro, 850 evo; as well as hearing good things about Crucial's M4, Mx100, Mx200. My preference is to spend approximately $200 for a 500GB unless there is clear evidence that I need to splurge on an OWC Mercury Extreme Pro because the Samsung/Crucial drives will just cause me trouble.
    If anyone can lead me to the SSD's that Apple themselves use, I would be much appreciative. As of now, I'm not even sure which Controller they utilize (Marvell?) and if they support TRIM. Any information to shed some light on this would be great as a lot of my knowledge has purely been from the articles I've been reading in the past few days.
    I know this question has been asked over and over again; but again, I am asking it to try and find the best SSD as of late.
    Thanks ahead of time!

    "I thought the non Retina MBPs were still connected via a SATA connection. "
    That is correct and that is why I was recommending that people buy that 2012 MBP non Retina that Apple was selling until just recently. Having the SATA connection while slower than PCIe allowed you more flexibility in purchasing upgraded drives.
    "I currently purchased a Mid-2012 Macbook Pro Non Retina"
    So you bought one of these? Be aware that if you modify the laptop in any way your warranty will be void unless the work is done by an Apple approved tech if Apple becomes aware of it.
    That said you could put a 480 SSD from OWC:
    http://eshop.macsales.com/shop/SSD/OWC/Mercury_6G/
    That can be had for $229 currently.
    I'd be wary of installing a Samsung in there because of problems like this:
    Samsung 850 EVO in Early '11 MBP
    A lot of people are running that drive just fine but now and then....
    I've installed 6 OWC SSDs in various Macs and have had 0 problems and 0 hassles formatting and installing them.

  • OWC 120GB Mercury Extreme Pro 6G SSD Solid State Drive Best SSD for a Mac?

    ive read that OWC is the best for mac. Is this true. what is your recommendations for a SSD for an 08' Macbook

    Yes. Your model has a SATA II bus that only supports up to 3 Gb/s drive interfaces. Thus, there is no point in spending more for a SATA III drive. If you expect you will soon want to move the SSD into a new model that does support the faster interface, then be sure the 6G model is downward compatible with the 3G bus. Most, but not all 6G SSDs are, so it's best to ask first.

  • Best SSD for late 2008 Macbook?

    Afternoon,
    I'm also looking for an SSD for my late 2008 aliminum Macbook. It's the 2ghz model : model number- A1278.
    Can anyone suggest one that's fast and reliable, but not too exspensive. I'm looking in the 250 GB range.
    THANK YOU VERY MUCH IN ADVANCE!
    BertieTBE 

    OCZ Vertex 3! Bar none!.  For this model, only 2 SSD works reliably with the MCP79 problem that hosts the sata controller. OCZ did their best work to rectify this situation where it works flawlessly now. Crucial M4 SSDs also works well without any effort. Vertex is very fast and lower cost than most SSDs due to aggressive price pushing by OCZ.
    Here is the right method of doing upgrade.
    1) Use a desktop PC to update the firmware of the SSD before installing. Choose Mac version or latest version.
    Set the sata 2 setting and temperature fix using the CD software of OCZ. Best firmware update anyone has ever created!.
    2) Put SSD in USB enclosure and connect it to your Mac. Download SuperDuper software for Mac to clone your existing disk.
    3) Run SuperDuper to clone. 1 hours or less.
    4) Shutdown everything and swap the HDD with the SSD.
    5) On Bootup, then quickly Reset SMC, Left-Shift  Control Option (3 fingers on these) and Power button. Remove Magsafe power, remove the battery, Press POWER with all those things removed for 5 sec. Put battery back, Magsafe on and power up.
    6) On Powering up, quicky do NVRAM reset with OPTION COMMAND P R keys. Hold it until it chimes twice, then release. See it boot in 15 seconds and "One More thing ....."
    7) Last step, on boot up, Download TRIM Enabler 2.2 and run it. Check System profiler to see it is ON. Then enjoy. Remember to backup daily or weekly, SSDs can fail anytime without warning unlike HDD.
    Note: This process can save people days of agony if they simply rush into the install without understanding the process and will cause all sorts of strange problems.

  • Please recommend a tool for stress-testing ?

    Could anyone please recommend a (free) tool to do multi-threaded stress-test, on plain java classes ?
    In more detail: I'd like to do unit-test for some plain java methods (only mathematical calculations. No web interface, no swing).
    The emphasis is stress test: i need to launch multiple threads, all of them repeately invoking my method. Under these conditions, I need to report correctness (has the method yielded the expected return value), and statistics on response time.
    Any recommendations would be appreciated . Thanks !

    alex888 wrote:
    Working on a project that need me read data from delimited text file, the data will be converted to a tree-structure. So it's better parse the data into XML format first.What??? Why? You've got a text file and need an object tree, why do you think going to XML in between is a good idea?
    Besides j2se or jdom, any fast tool for it?What do you mean with "j2se", that's not a XML handling tool (it contains several, 'though).
    SAX sounds good for building object trees from XML, but there are several XML mapping libraries out there (try google).

  • Best SSD for 2009 Macbook Pro?

    Hi
    I am looking to upgrading my Macbook Pro 2009 2.53 GHz processor and 8GB RAM.
    The planned upgrade this time is an SSD.
    I think I want a 120-128GB SSD. It will fit the Lion OS and applications and some application content as well. May be my photos and Aperture and my documents folder which I access the most frequently.
    Question I have and one that I have not managed to answer after some research even, is that SSD is the best one for the Mac. And what SSD is the best bang for the buck.
    TRIM - I gathered from my research that this is a good capability to have, but Mac OS does not support it natively.
    I am not eager to do anything that tinkers with the OS settings etc. Opening the machine and installing this in place of the CD ROM will be enough of an adventure for me
    Will appreciate advice. Thank you!

    Great question. I have the same machine, though I'm looking for a 250gig SSD. Right now, it seems like a shootout between OCZ and OWC. I'd like other users' experiences with compatible SSD drives.

  • Please recommend GPS App for Tour

    Hello, I have Verizon Wireless and would like to purchase a GPS for my BlackBerry Tour.  I see that there are a lot of different options.  I simply want a GPS that works like a Garmin, where it displays the streets and has a voice that tells me when to turn. I do have GPS activated on the phone so I just need an App that works with it other than Google Maps.  I tried a couple of free GPS apps and they sucked so I know that I have to pay if I want a good app. Please recommend me such a GPS app.  Thank you.

    This is not much of a solution, but if you switch to Sprint, they give you a free GPS application that works just like your Magellan/Garmin/etc.
    I would quite literally be lost without my Sprint Maps

  • Best SSD for MacBook with a twist...

    Hi all,
    This is my first post in this forum, so hello.
    I would like to get a SSD for my MacBook with a fairly decent amount of storage 60GB would be tight, 80GB would be fine, 120GB would be nice. I am not concerned about speed! As long as it's as fast as my 5400rpm stock HD, I really don't care.
    What I do care about are these controller issues I've been hearing about. JMicron? I've been thinking about a OCZ Solid Series 120GB for $230, or an Intel X-25M 80GB for $290.
    So my question is what is the best SSD to buy for size and stabilitiy, and not speed.

    Go for Intel or Samsung if you can. Both players are also supplying many other brands. These 2 guys control the supply chain and the know-how.
    So far, I'm happy with my kingspec in my MBA. Samsung in my Sony. Intel X25-M in my pc.

Maybe you are looking for

  • How to call a portal KM URL link from WAD template Link

    Hi All I  am trying to call a Portal KM URL Link from the web template using the link control. I cannot figure out whare and how to put the portal KM URL Link into the web application web link. Your help is greatly appreciated. Thanks Karen

  • Help! File disappeared!

    Hello, I'm fairly new to Illustrator and I'm hoping someone can help me. I was working on a project yesterday and saved it both in its original ai format and in gif format. You know when you first open Illustrator and it lists recently opened files?

  • Migration from G3 iBook to Macbook Pro 2.16

    I bought a Macbook Pro Core2Duo 2.16 when I was in the States in January. Used Migration Assistant to transfer system from the iBook G3 (10.3.9) when I got home in February. No real problems (& the Pro is perfect -- and the great iBook is still in us

  • Get SAP User E-Mail Address

    Hi, does anybody know where I can find the e-mail address of a sap user (The one which you can edit via SU01). I already took a look at all the usr* tables and of course adrc but this little bastard still hides in the dark Any help is greatly appreci

  • Need help on message mapping screen

    Hi folks, I am working on file to idoc scenario.   I Imported the IDOC to my scenario. In Messaga Mapping IDOC structure displaying fields as a documention. but i need techincal names of those fields. for Example:   In my IDOC 1 field is showing comp