Please REFS as the new file system

it's about time for ntfs to be retired REFS is the file system everybody should have should be included in windows 10 as the default file system when upgrading should slowly migrate to the new file system just a thought i hate defragging

you might be right, but ReFS does not support booting to windows yet.

Similar Messages

New file system successfu completion-upgrade

Dear all,
Am upgrading our 11i instance to 12.1.1
Now, am installing/laying out the new file system in the new app server. What need to be checked exactly after this installation . or making sure to get the instance passed all of the post install steps (uprgade file) is enough
Please advise

user9338712 wrote:
Thanks Hussein.
I laid down the file system and that was successful.
Am stucked with the below point
Apply AD 12.1.1 upgrade driver (required)
Applies to 11i release level: All
TUMS step key: N/A
Download and unzip the AD Upgrade Driver for 12.1.1 (patch 7461070). Use
AutoPatch to run it on all application tier server nodes on your Release 12.1.1
APPL_TOP.
There is a pre-req patch 6767273 for this patch and when am applyin the patch a, getting the below error :
utoPatch error:
adprdf(): At line 3 in file u6767273.drv:
This patch cannot be applied to your current release.
Patch's intended release is "12.0.0"
Your current release is "11.5.10.2"
You should check the file
Please advise how to proceed with thisThis indicates that the R12 env file has not been sourced and you have sourced the 11i env file.
Why Do Some Patches Error Reporting 11i Environment During R12 Upgrade? [ID 1276074.1]
Table 2-2 Locations of Applications Environment Files
http://docs.oracle.com/cd/E18727_01/doc.121/e12841/T120505T120509.htm#338715
Thanks,
Hussein

Sun Cluster 3.0 Veritas Volume manager add a new file system

Hello people recently in need add a new file system to my Solaris cluster installation ( with oracle 8), but I have some dudes about the correct procedure for this.
I put the procedure:
Ok:
/etc/vx/bin/vxdisksetup -i c4t1d1
/usr/sbin/vxdg -g space-dg adddisk space07= c4t1d1s2
/etc/vx/bin/vxdisksetup -i c4t1d2
/usr/sbin/vxdg -g space-dg adddisk space08= c4t1d2s2
/usr/sbin/vxassist -g space-dg make vol3-space 70686720 layout=striped stripeunit=128 alloc="space07 space08"
mkfs -F vxfs /dev/vx/rdsk/space-dg/vol3-space
In this point I update my dginfo in the active node of my cluster
scconf -c -D name=space-dg,sync
Add in all node /etc/vfstab)
/dev/vx/dsk/space-dg/vol3-space /dev/vx/rdsk/space-dg/vol3-space /space_mount/vol3-space vxfs 2 no -
Made the mount point in all nodes:
mkfs /space_mount/vol3-space
mount the file system in active node.
mount /space_mount/vol3-space
use sccheck.
My dude is about is about Storage plus resource (space-grp:space-storageplus-res:FilesystemMountPoints) because this don�t have the new mount poing, if I must put the new mount point in this property using: scrgadm because my cluster has HAStorage-plus.
What is the optimal form? If I must use scrgadm I can modify this property (FilesystemMountPoints) with
(scrgadm -x FilesystemMountPoints =value) ??
Or must recreate space-storageplus-res????
Thanks for you time and sorry for my English.

Thanks I made sucessuly.
The final procedure:
1 create the disks in vertias (not the volumen)
2 if you add new disk, recreate the did
scdidadm -L
scdidadm -r (must exec in all nodes)
scgdevs (in all nodes)
3 Disable the resouces using scswitch -n -j (the resouce)
in my case we disable all resouce but NOT the resouce group. (only exec in one node)
Make the new file system. :-D. makefs. (in one node)
4 make the new pount mount in all nodes.
5 insert the new line in vfstab (remenber the mount at boot to set to no)
scrgadm -pvv | grep "FilesystemMounPoints="
6 You must put the "FilesystemMounPoints=" in same orden in vfstab
I use the sunplex (more easy) ..
Renable to online your resources.
Test to switch over to another node.
The new filesystem may be automaticaly mounted.
Bye an thanks for the help

Why does the new operating system not delete the moved files from their original location - it seems like an enormous waste of space, time and effort to clean up every file once you've moved it

Why does the new operating system not delete the moved files from their original locations - it seems like an enormous waste of space, time and effort to clean up every file once you've moved it - also, when transferring large amounts of files it becomes a very large problem remembering which files were transferred and which not.

You're going to need to be more specific, as I'm not quite sure I understand what you're talking about.
If you're referring to copying from an external hard drive or flash drive, and you want to actually move files rather than copy them, you can hold down the option key to force it to do a "move" rather than a "copy." This is not new behavior, though... the Mac OS has worked this way as long as I can recall (and I've been using it since 1984).
If you're having a problem with trying to move files from one place to another on a single drive causing them to be copied instead, that is likely because of some permissions issue preventing you from actually being able to move them.

Please help. Since upgrading the new operating system I cannot manage my music through my car

Please help. Since upgrading to the new operating system, I cannot play my music on my IPhone 4S. I used to use the USB cable and manage my music that way, now it won't even support the auxiliary cord.

What happens when you try?
Have you tried basic troubleshooting from the User's Guide?

I downloaded the new operating system and now the Bluetooth in the car does not play my music. All the songs show the cloud with a red arrow pointing down. How do I download all of them again to my I phone please?

I downloaded the new operating system and now the Bluetooth in the car does not play my music. The music on the phone show the cloud and the red arrow pointing downwards. How do I download all the music again to my phone please?

I have an ITunes account. I got it when I got my IPOD. I've thought about upgrading, but I didn't see any reason to buy a newer IPOD because they all come with so much stuff I don't want/need. I don't have my current IPOD filled yet and I really don't need an IPOD Touch that has capabilities that my Droid already has. I don't need to be concerned with documents, mail, attaching to Facebook or playing games. I can do all that on my phone. I just want to maintain my music between 3 devices.
So now that I see it is not to my benefit to have this product---can you point me in the direction to cancel this? And how do I get my music back? Will it show up once I cancel my account?

After downloading the new operating system to my 3GS, all the events in my calender are doubled!! HELP PLEASE!

after downloading the new operating system to my 3GS, all the events in my calender are doubled!! HELP PLEASE!

did you find a solution for this?

TS1702 The lexis nexis dictionary app apparently isn't supported by the new ios system. I tried to report a problem but it lead me here. Please advise.

The lexis nexis dictionary app apparently isn't supported by the new ios system. I tried to report a problem but it lead me here. Please advise.

Lexisnexis appears to have chosen not to provide the dictionary app any longer.
I suggest you contact Lexisnexis support at http://www.lexisnexis.com

How do I get features to show up in general settings like iCloud and FaceTime? I also can't turn on location services for Siri. I have the new iPad and have updated to the new operating system. Please Help Me.

How do I get features to show up in General Settings like iCloud and FaceTime and Location services to show up for Siri?

SADLY not as i downloaded an upgrad to my original PAGES/
i have in the meantim had to open www.icloud. then from there import the file that i am working on and then check on ipad if it uploaded/ yes it did.
but what a waste of time as it doesn not save any changes done automatically back in the cloud....
i am now downloading the new LION and hope that it will fix the problem
i cant find any other way. I was lead to believe that you wrote, it saved automatically, on to the cloud, you then opened anohter device in anotother country even, and the new file was there, waiting, in its latest version.......
and the same magic was supposed to happen in reverse.
It doesn't/
if i have to open a browser, go to www.icloud....why on earth did they not just leave us an icon to drop it in in that case?
I hope the new lion will help resolve the isssue/
any other ideas> keep em coming...thank you so much.

TS3694 Why is the IPAD not updating to the new Operating System. I get this 3014 error all the time. Help please?

I just updating to the new operating system. My Ipad is having problems updating to the new operatinng system IO6 I think. Anyways I keep getting this 3014 error. Is anyone else experiencing this problem?

I am having the same problem. I think I saw something about VPN and not being able to communicate with Apple web site. Do you have your protected company email on your phone?

This application is not yet configured. Please refer to the E2E post-instal

Hi,
I have configured the SMD on Solution Manager 4.0 SP 11, LMSERVICE SP12 (Before it was SP 11 but is still had the same error)
Wily Introscope 7.1.
The solution has been published and I able to use all the other diagnostic modules except for E2E.
When I click on any E2E Workload/Exception etc I get the following message
"This application is not yet configured. Please refer to the E2E post-installation steps"
What are the specific steps to enable my application for E2E?
Thanks,
Vikram

Hi Bernd
Thanks for the detailed steps. My comments interspersed
> Hi Vikram,
>
> 2 steps have to be performed:
>
> 1) Scheduler Configuration
> 1.     Connect to the Diagnostics system.
> 2.     Start the Scheduler application
> o     Diagnostics Administration  Managed Systems
>  Scheduler
> 3.     Select the E2E Log Analysis Task. This task
> analyses log and dumps files to collect Error and
> Dump messages from the associated managed system.
> 4.     Activate the Task for the host belonging to the
> managed landscapes
> N.B.: Please be aware that this task will fail as
> long as the configuration step Setup RFC
> Destinations has not been successfully performed.
> Navigation Activation
This step has been completed, and there are no errors. I don't think I need an RFC since my managed system is a J2ee stack Netweaver ( 2004s SP12 ). This is the message that I see in the E2E Log Analysis scheduler "Execution succeeded in 3188 ms. Next execution in 60 min(s)."
>
> 2)
> 1.     Start Visual admin
> 2.     Go to Server -> Services -> Configuration
> Adapter.
> 3.     In the Display Configuration tab drill in:
> apps -> sap.com -> tcwebadminstratornavigation~ejb
> -> appcfg
> 4.     Enter the edit mode and set the custom value to
> true for the three properties named:
> o     e2e_*_configured ( where * is the name of the E2E
> application you want to enable)
> 5.     Restart the navigation and the corresponding E2E
> applications can now be started.
I have set the custom values to true for the following:
e2e_log_analysis_configured
e2e_trace_configured
e2e_ workload_analysis_configured
In the Propertysheet.application.global.properties, restarted the apps
But I still get the same error.
Is there any other configuration involved?
BTW, Is there any document that details the above steps you have pointed out? I guess I must have gone through all the diagnostics set up guide, but have not come across this uptill now
Once again Thanks a lot!
Vikram

How to get access to the local file system when running with Web Start

I'm trying to create a JavaFX app that reads and writes image files to the local file system. Unfortunately, when I run it using the JNLP file that NetBeans generates, I get access permission errors when I try to create an Image object from a .png file.
Is there any way to make this work in Netbeans? I assume I need to sign the jar or something? I tried turning "Enable Web Start" on in the application settings, and "self-sign by generated key", but that made it so the app wouldn't launch at all using the JNLP file.

Same as usual as with any other web start app : sign the app or modify the policies of the local JRE. Better sign the app with a temp certificate.
As for the 2nd error (signed app does not launch), I have no idea as I haven't tried using JWS with FX 2.0 yet. Try to activate console and loggin in Java's control panel options (in W7, JWS logs are in c:\users\<userid>\appdata\LocalLow\Sun\Java\Deployment\log) and see if anything appear here.
Anyway JWS errors are notoriously not easy to figure out and the whole technology in itself is temperamental. Find the tool named JaNeLA on the web it will help you analyze syntax error in your JNLP (though it is not aware of the new syntax introduced for FX 2.0 and may produce lots of errors on those) and head to the JWS forum (Java Web Start & JNLP Andrew Thompson who dwells over there is the author of JaNeLA).

Why can't I access the K1 file system from my PC?

I could access the entire file system excluding the data folder yesterday. However since installing Letools, I no longer can drag-and-drop photos and movies to the K1 from Windows Explorer. I uninstalled Letools, but I still can't access the file system.
Please help.
Thank you

Thank you for trying to help. We have compared security mode settings and their Macs say that commenting is allowed, while mine says it's not allowed. I'm assuming this is why I can't highlight and they can. But I dont understand why they're different? The files this happens to are PDFs that our college classes assign as reading- so we all go to the same place to access these PDFs and save them, so the security modes shouldn't be different, but they are. Any idea why? Are Macs just enabled to do this for whatever reason and PCs aren't?

How do i deinstall ios7 and go back to ios6 on my ipad? The new op system is slow, flickery, and won't allow me to run youtube videos. Makes my ipad pretty darn useless.

How do i deinstall ios7 on my ipad? The new op system won't let me run Youtube, won't give me accesss to one of my gmail accounts, flickers when i do searches, and pretty much made my favorite device pretty much useless. Please don't tell me that apple is deliberately trying to get me to upgrade my old device just to generate revenue. That's why i switched from Microsoft products four years ago. Is it time to go Andriod?

Apple does not support ios downgrades. The same question was asked hundereds of times when ios 6 and every other new version came out.
Try this
Reboot device by pressing both the home button and sleep/wake (power) buttons at the same time for 10-15 seconds until the apple logo appears on the screen, then let go.
If that doesn't work then reset the device by going to settings/general/reset/reset all settings (or for network connection issues 'reset network settings').
(no media or data will be deleted from the device, this will only take a minute).
If that doesn't work then backup and then restore the device as new first (to isolate cause of the issue). Then from backup if necessary.
Make sure iTunes is updated to the latest version
How to back up and restore (iCloud and iTunes)
http://support.apple.com/kb/HT1766

Trying to move my iTunes Music and other media from the main drive on my pc to an external hard drive but iTunes is not recognizing the new file location? Ideas?

Trying to move my iTunes Music and other media from the main drive on my pc to an external hard drive but iTunes is not recognizing the new file location? Ideas?

Hello there, Underwriter.
The following Knowledge Base article provides in-depth instructions on how to migrate your content to an external drive:
iTunes: How to move your music to a new computer
http://support.apple.com/kb/ht4527
Particularly of note for your situation:
External drive
This option requires more work than Home Sharing, but it creates a backup of your iTunes library on the external drive in addition to moving your content.
Notes before you start:
You can use most iPods as an external drive.
Windows operating systems don't recognize Mac OS-formatted disks (HFS or HFS Plus formats). Because of this, you can't use a Mac-formatted iPod or external drive to move your music to a Windows PC. See iPod: How to determine iPod's hard disk format if you're not sure how your iPod is formatted.
Mac OS X can read Windows-formatted iPods and drives. This means there are many ways to migrate your information from your old Windows-based PC to your new Mac.
Mac OS X: To be sure external drives appear on your desktop, choose Preferences from the Finder menu. Be sure the options for "External disks" and "Hard disks" are enabled.
Part 1: Locating and consolidating the iTunes Media folder
Part 2: Copy iTunes folder from the old computer:
Part 3: Get iTunes ready on your new computer
Part 4: Back up any music that's already on your new computer
Part 5: Copy music to your new computer
Part 6: Add preexisting music that was on the new computer back into the library
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

Please REFS as the new file system

Similar Messages

Maybe you are looking for