Please reset the ADE activation limit. Last Werk I bought a New ereader Now, when I will read a ebook then appears the message E_ACT_TOO_MANY_ACTIVATIONS

Please reset the ADE activation limit.
Last Werk I bought a New ereader
Now, when I will read a ebook then appears the message E_ACT_TOO_MANY_ACTIVATIONS

thanks alot,
now every thing is working fine, just what I needed!!!
regards and thanks again
Groy78

Similar Messages

My old computer is spoilt. so i bought a new one. now when i try to sync my iPodtouch with my new computer it says "do u wanna erase" the things on my iPod. i clicked NO. but i really wanna update my iPod to io5 but i can't as i dont want to lose my stuff

My old computer is spoilt. so i bought a new one. now when i try to sync my iPodtouch with my new computer it says "do u wanna erase" the things on my iPod. i clicked NO. but i really wanna update my iPod to io5 but i can't as i dont want to lose my stuff

Before you restore the iPod from the backup that Dave had you make yu have to transfer stuff from the iPod to the computer since the backup does not contain the apps themselfes, music, synced phots and some other stuff. To see what a backup contains see:
http://support.apple.com/kb/HT4946
To transfer iTunes purchases:
iTunes Store: Transferring purchases from your iPhone, iPad, or iPod to a computer
- For other stuff you need a third-party program like one of those discussed here:
Copy music from Ipod to new computer...: Apple Support CommunitiesA lot of thos are paid, especiall for more than a limited number of items. It is harder to find one that does synced photos.

HT201274 How do I change the registration of my ipod? I bought a new ipod and want to register it under a different name.

I just bought a new ipod and when I plugged it in to register it, the name of my son's ipod appeared. How do I change the registration so that I can make it my own?

It sounds like yu either restored it from a backup of your son's iPod or you set it up via iTunes with iTunes signed into his account.
I would go to Settings>General>Reset>Ease all content and settings and then set it up with your account. If you do it via iTunes make sure that iTunes is signed into your account.

I entered new fields in a form that was created last year to update it. However, now when I view the responses, they are listed as Column 1, Column 5, etc. It doesn't show a label for the actual field when I view the responses. Can you please help?

I entered new fields in a form that was created last year to update it. However, now when I view the responses, the headings are listed as Column 1, Column 5, etc. rather than the name of the heading. Can you please help?

Hi Mike,
CRSE is an OEM Product and for use with a custom application they have written. Unfortunately we don't their reports or how they are connecting, it would appear they were originally built off a SQL and then set to a Dataset in the app or they could be adding the data source at runtime. Lots of variations and without access to the source code to see what they are doing not much we can help you with.
You need to contact the OEM Partner for help in resolving this and find out what you can and need to do to update your SP and work with their canned reports,
Thank you
Don

I just downloaded Lion. Now when I open Safari, it automatically opens to the last page visited. How do I reset it to open to a blank page as it did previously?

I just downloaded Lion. Now when I open Safari, it automatically opens to the last page visited. How do I reset it to open to a blank page as it did previously?

Dealing With The Resume Feature of Lion
Managing Mac OS X Lion's application resume feature.
If you shutdown your computer you should get a dialog asking if you want applications to resume on the next startup. Simply uncheck the box to prevent that from occurring. Open General preferences and uncheck the option to Restore windows when quitting and re-opening apps. You can also install a third-party utility to control resume features on individual applications: RestoreMeNot or Application State Cleaner.
It is possible to completely stop the Resume feature although I'm unconvinced that it is that annoying. Nevertheless see the following:
If you have not yet done so you must first make your /Home/Library/ folder visible. Open the Terminal application in the Utilities folder. At the prompt paste the following command line:
chflags nohidden ~/Library
Press RETURN. Quit the Terminal application.
In the Finder navigate to the /Home/Library/Saved Application State/ folder. Delete the contents of the folder. Back up to the /Home/Library/ folder. Select the Saved Application State folder. Press COMMAND-I to open the Get Info window. In the Sharing and Permissions panel at the bottom click on the lock icon and authenticate. Set each of the listed entries to Read Only. Close the Get Info window.
Quit all open programs except the Finder (this is very important.) Next, navigate to the /Home/Library/Preferences/ByHost/ folder. Look for a .plist file with "com.apple.loginwindow." in the file name followed by some numbers in hexadecimal. Select the file. Press COMMAND-I to open the Get Info window and in the Sharing and Permissions panel click on the lock icon and authenticate. Set each of the listed entries to Read Only. Close the Get Info window. If you also find a file with the same filename but with a last extension of ".lockfile," then you should delete it.
The above should eliminate the Resume feature system-wide. Note that any future system updates or upgrades will likely undo these changes. You will then need to repeat this procedure assuming there are no major changes in OS X related to it.

Apple id was originally disabled. I reset my password and can sign into my apple id account. But when i want to buy an app in the app store it says my apple id is disabled again.

apple id was originally disabled. I reset my password and can sign into my apple id account. But when i want to buy an app in the app store it says my apple id is disabled again.

It's real easy to create a new one and, in fact, it's too easy. I say that because multiple IDs are a PIA. The problem is that anything obtained from the iTunes Store is PERMANENTLY associated with the ID that was used to obtain the item(s). iTunes items can not be transferred from one ID to another and IDs can not be merged.
The problem arises when you want to update an app. If you're doing it from iTunes on your computer, you must log out and back in to get to the correct ID. Then you update and log out/in again to get back to where you started. It's slightly easier if you update from the iPad/iPod device as there is no need to log out/in BUT you still need the correct password for the appropriate ID. Of course, with a disabled ID, the problem is much worse!
A replacement Apple ID makes sense ONLY if you wish to start out absolutely brand new with zero iTunes Store purchases.
If you're really butting your head aginst a wall and you're reasonably close to an Apple Store, my suggestion is that you make an appointment with the resident "Genius" and get his/her help.
One last thought... If your brother actually got a human on the phone to dispute the charges, go there and explain the problem. Of course, if Apple did not accept his explanation of what occurred, that could be the whole issue. Apple believes that money is owed on the account!

I am trying to license my recent download of Lightroom 5 onto my recently purchased Macbook with the serial number of the disk I purchased last year for my Windows PC (an upgrade from Lightroom 4). I receive an error "The serial number you entered is inv

I am trying to license my recent download of Lightroom 5 onto my recently purchased Macbook with the serial number of the disk I purchased last year for my Windows PC (an upgrade from Lightroom 4). I receive an error "The serial number you entered is invalid". Why does CC not recognize this as a valid serial number?

Soyouca how did you install Photoshop Lightroom? Please uninstall the current installation using the uninstaller located in Applications/Utilities/Adobe Installers.
Once Photoshop Lightroom is removed please download a fresh copy of the installation files from Adobe - Lightroom : For Macintosh. The update contains the full installer so please download the latest version of Photoshop Lightroom 5.
You may be asked to enter your serial number for Photoshop Lightroom 4. You can find information on how to locate the serial numbers under your account at Find your serial number quickly - http://helpx.adobe.com/x-productkb/global/find-serial-number.html.

I have a new iPad and tried to set up as new, then realized i needed to sign in as an existing itunes user. I reset my new ipad as new, but now when I sign in using my existing ipad it backs up to the new one I just set up. I need my itunes on new iTune

I have a new iPad and tried to set up as new, then realized i needed to sign in as an existing itunes user. I reset my new ipad as new, but now when I sign in using my existing ipad it backs up to the new one I just set up. I need my itunes account on my new ipad. help

You want to restore from the backup. Do not set up as new. You can read the article that Tom posted above, but it really is pretty simple.
Transfer any purchases from the old iPad into iTunes, backup the old iPad in iTunes and them sync one more time.
Connect the new iPad and when prompted during activation, restore from the backup that you just created and then sync with iTunes.
The new iPad should be identical to the old iPad, but you will have to enter some passwords again on the new device.
Transfer purchases.
http://support.apple.com/kb/HT1848
How to backup and restore from a backup
http://support.apple.com/kb/HT1766

I just bought a new ipad 2, but cannot use it as it only shows the itunes logo and a cable. This means it's telling me to connect to itunes. I've done this and performed sync, still no way out. I have been told by friends to "unlock" it. Please how?

I just bought a new ipad 2, but cannot use it as it only shows the itunes logo and a cable. This means it's telling me to connect to itunes. I've done this and performed sync, still no way out. I have been told by friends to "unlock" it. Please how?

Have you already activated the iPad? That is what the screen is telling you to do - connect to the computer with the supplied cable and run iTunes while connected - and iTunes should guide you through the set up process. If you have already set up the iPad and you are still getting thos screen message - restore your iPad. You must be running iTunes 10.5 on your computer as well.
Restore iPad
If you can't restore this way, you will need recovery mode.
Unable to Restore

Last night I did an update and now when I turn on my macbook it just goes to the white screen with the apple and stays like that.

Last night I did an update and now when I turn on my macbook it just goes to the white screen with the apple and stays like that. How do I fix this issue?

Take each of these steps that you haven't already tried. Stop when the problem is resolved.
To restart an unresponsive computer, press and hold the power button for a few seconds until the power shuts off, then release, wait a few more seconds, and press it again briefly.
Step 1
The first step in dealing with a startup failure is to secure the data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since the last backup, you can skip this step.
There are several ways to back up a Mac that is unable to start. You need an external hard drive to hold the backup data.
a. Start up from the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.” The article refers to starting up from a DVD, but the procedure in Recovery mode is the same. You don't need a DVD if you're running OS X 10.7 or later.
b. If Step 1a fails because of disk errors, and no other Mac is available, then you may be able to salvage some of your files by copying them in the Finder. If you already have an external drive with OS X installed, start up from it. Otherwise, if you have Internet access, follow the instructions on this page to prepare the external drive and install OS X on it. You'll use the Recovery installer, rather than downloading it from the App Store.
c. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, start the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
d. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
If the startup process stops at a blank gray screen with no Apple logo or spinning "daisy wheel," then the startup volume may be full. If you had previously seen warnings of low disk space, this is almost certainly the case. You might be able to start up in safe mode even though you can't start up normally. Otherwise, start up from an external drive, or else use the technique in Step 1b, 1c, or 1d to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation.
Step 3
Sometimes a startup failure can be resolved by resetting the NVRAM.
Step 4
If a desktop Mac hangs at a plain gray screen with a movable cursor, the keyboard may not be recognized. Press and hold the button on the side of an Apple wireless keyboard to make it discoverable. If need be, replace or recharge the batteries. If you're using a USB keyboard connected to a hub, connect it to a built-in port.
Step 5
If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
Step 6
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to start up, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can start up now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
Step 7
If you've started from an external storage device, make sure that the internal startup volume is selected in the Startup Disk pane of System Preferences.
Start up in safe mode. Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to start and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know the login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you start up in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, the startup volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 11. If you ever have another problem with the drive, replace it immediately.
If you can start and log in in safe mode, empty the Trash, and then open the Finder Info window on the startup volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then restart as usual (i.e., not in safe mode.)
If the startup process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 8
Launch Disk Utility in Recovery mode (see Step 1.) Select the startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then restart as usual.
Step 9
If the startup device is an aftermarket SSD, it may need a firmware update and/or a forced "garbage collection." Instructions for doing this with a Crucial-branded SSD were posted here. Some of those instructions may apply to other brands of SSD, but you should check with the vendor's tech support.
Step 10
Reinstall the OS. If the Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Step 11
Do as in Step 9, but this time erase the startup volume in Disk Utility before installing. The system should automatically restart into the Setup Assistant. Follow the prompts to transfer the data from a Time Machine or other backup.
Step 12
This step applies only to models that have a logic-board ("PRAM") battery: all Mac Pro's and some others (not current models.) Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a startup failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
Step 13
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.

I just bought a new Iphone and when I connected it to itunes and I downloaded the backup from my last device, now I can't pass this step and every time I connect it to itunes is the same thing.

I just bought a new Iphone and when I connected it to itunes and I downloaded the backup from my last device, now I can't pass this step and every time I connect it to itunes is the same thing. And I can't download any app because problems with my account regarding the credit card but the information is correct and it says it is not!!!

You'll have to contact iTunes store support regarding your credit card information problem: http://www.apple.com/emea/support/itunes/contact.html. I'm not clear on what you're saying about your backup. Are you saying that when you connect to iTunes it's asking you to restore from backup even though you already have?

I purchased and installed the Photoshop Photography Program last year but my computer crashed and now I need to re-install it again...can someone help?

I purchased and installed the Photoshop Photography Program last year but my computer crashed and now I need to re-install it again...can someone help?

Hi Sangeeta,
For a fresh download on a new hard drive, it's best to start with the CC desktop app. Sign into adobe.com and download it here: creative.adobe.com/products/download/creative-cloud
You can then launch the desktop, sign in and download PS & LR.

My PC was on its last leg, I bought a new one. How do I transfer my ITunes to the new PC

My PC was on its last leg, I bought a new one. How do I transfer my ITunes to the new PC

refer to this article:
iTunes: How to move your music to a new computer
http://support.apple.com/kb/HT4527

My last computer crashed and my new computer doesn't have a disk drive. I downloaded the CS package, put in my serial number,but during install is is still requiring a disk. What do I do?

My last computer crashed and my new computer doesn't have a disk drive. I downloaded the CS package, put in my serial number,but during install is is still requiring a disk. What do I do?

is your cs6 a upgrade?
if so, after entering your cs6 serial number you will be prompted to select the qualifying product from a dropdown. select the product you own and enter its serial number.
after entering each serial number at the correct time installation will proceed.
if no, what files (names and extensions) did you download and what are the file sizes shown on your hd?

My last computer crashed and my new computer doesn't have a disk drive. I downloaded the CS6 package, put in my serial number, but during install it is still requiring a disk. What do I do?

My last computer crashed and my new computer doesn't have a disk drive. I downloaded the CS6 package, put in my serial number, but during install it is still requiring a disk. What do I do?

Thread moved from the Adobe Captivate forums.

Please reset the ADE activation limit. Last Werk I bought a New ereader Now, when I will read a ebook then appears the message E_ACT_TOO_MANY_ACTIVATIONS

Similar Messages

Maybe you are looking for