Please select your language message

hi.
every time i boot my mac a screen appears saying "Please select your language"
does someone knows to fix it?
thanks.

german,spanish,english (by default),italian,french and a lot that i cannot remember. but its still happening, and im really confused.

Similar Messages

Opened Safari and it has an open window that says "Congratulations you are the winner for April 11th. Please select your prize and enter your email" I did not follow the link but I can't quit safari. Can't shut down either Safari stops my request

Opened Safari and it has an open window that says "Congratulations you are the winner for April 11th. Please select your prize and enter your email" I did not follow the link but I can't quit safari. Can't shut down either Safari stops my request. How do I get Safari to be normal again?

Opened Safari and it has an open window that says "Congratulations you are the winner for April 11th. Please select your prize and enter your email" I did not follow the link but I can't quit safari. Can't shut down either Safari stops my request. How do I get Safari to be normal again?

When I try to start my macbook it gives an error of Please restart your computer, but when i do this i get the same error.

When I try to start my macbook it gives an error of Please restart your computer, but when i do this i get the same error. This occured after my macbook pro shut down (because of low battery) while it was installing some updates. Please Help?

Try reinstalling OS X. What version did you have installed? If it's Snow Leopard do this:
Reinstall OS X without erasing the drive
Do the following:
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install the Combo Updater for the version you prefer from support.apple.com/downloads/.

Selected Wrong Language in set up

Can someone tell me how to get back to English. I hit the wrong button at set up and can't seem to get back to the language selection list???

Welcome to the forum K P,
Just toggle the hold to on then off, then press and hold the middle and menu button until the apple logo appears. Then select your language.
Regards,
Craig

Message: please select folder that contains your Adobe GoLive files

Hi, I'm really new to DW 5, I did use DW when it first came out and started to get the hang of some things, but my learning was not going as fast as I needed it to go. So I have two questions, I have searched the forums for my answers but I'm getting them in bits and peices and have also found the same question I'm about to ask, but didn't see an answer.
Anyways, first; I'm using OS X (updated to 10.6.5) I was using "GoLive" but in the middle of updating the site, GL would crash, it wasn't from anything inperticular, it would just crash, it was always around 4-5 minutes of using it. So I started using "GoLive CS" it had been working great until today, GL CS is now starting to crash on me, doesn't matter what I'm doing, it's just a time thing.
Is there anything to fix this bug?
I think I might know why, and I could be wrong.......... that this is a compatable issue, but I'm not sure. I think because they are not providing anymore updates for GoLive (any version) that pretty soon I might not even be able to use it at all, but if I'm wrong, Please help.
Now if my thoughts are correct on the first question, then can some one please help me with this message I get when trying to "Migrate" my site from Golive to Dreamweaver.
My first question tonight was going to be why do my pages look like there is nothing on the when I open any page in Dreamweaver when I saw the post about migrating your site to Dreamweaver.
I downloaded the extension for Dreamweaver, I installed it but when I go to migrate the "site" it gives me this message.
Message: please select folder that contains your Adobe GoLive files
I came back to the forums to reread the post, but what it says to change in yoour files, I can't find. It says something about changing your "root" file.
I can't find what to change.
I kind of like GoLive better, at least right now, but I tryed to use DW tonight to really compair the two, I got CS5 about 5 months ago which included Dreamweaver CS5, so I thought I would give it a try utill I opened it and all of my pages were blank. But I still didn't give up and now this is where I am.
Thanks for any help, sorry for such a long posting, but I would really like to see if I like DW with out starting all over and having to rebuild my sites from scratch in DW.

My sites were created in GoLive (i think version 6), but it started to crash, so I switched to GoLive CS (i think this is version 7).
It was working fine until yesterday. Yesterday GoLive CS started to crash, so I decided to give DreamWeaver a try since it came with the version of CS5 that I bought about 4-5 months ago.
Yes, I downloaded and installed the extention from the link, the one that talks about Dreamweaver CS4, and I also read this on that page (below is what I copied from the page)
========================================================================================== ===
Note also: If you created your site with GoLive CS (7) or older and then upgraded to GoLive CS2 (8) or GoLive 9, you may experience problems with the GoLive Migration Kit extension for Dreamweaver CS4. If this is the case, try renaming the following:
Rootfolder-fd > web-content
Rootfolder-fd.settings > web-settings
Rootfolder-fd.data > web-data
========================================================================================== ===
I looked for "Rootfolder-fd -fd.setting and fd.data" I can't find them.
I was going to try and change them.

I tried to open an Audacity file. I got the following error message: "Warning there is very little free disc space left on this volume. Please select another temporary directory in your preferences. How do I select another temporary directory?

I tried to open an Audacity file. I got the following error message: "Warning there is very little free disc space left on this volume. Please select another temporary directory in your preferences. How do I select another temporary directory?

Audacity > Preferences > Directories. You will probably need to use an external drive as it sounds like you Mac's drive is getting too full???

I have an MacBook Pro 10.6, using disk utility I tried to verify my disk, but it came up with the message, please use your start up disk, I tried this, starting the computer up and pressing C, but it ejected the disk, the same thing happened while I runni

I have an MacBook Pro 10.6, using disk utility I tried to verify my disk, but it came up with the message, please use your start up disk, I tried this, starting the computer up and pressing C, but it ejected the disk, the same thing happened while I running the computer. Is the hard drive damaged as laptop doesn't seem to recognize the start up disk ? If so, I presume I will have to put in a new one.
There haven't been any problems with the computer, apart from a sticky curser,I have run a permissions programme from disk utility, there were a lot of different ones, but it seem to be able to fix them.
Any comments or ideas ?
Thank you in anticipation.

First backup your users files off the machine to a external storage drive (not TimeMachine!)
Most commonly used backup methods
Next to startup from the disk, have it inserted, hold c or option/alt (wired or built in keyboard) and then boot the computer and or select the disk when it appears and click the arrow.
Disk Utility is under the Utilities menu on the second screen.
Step by Step to fix your Mac
If you used the wrong 10.6 disk, it will spit it out or have issues, use the one that came with that machine or if it's defective, call Apple for a new one.

I got this message:" Software Update Update failed Something is trying to trick Firefox into accepting an insecure update. Please contact your network provider and seek help." What on earth is this about? I am not computer savy.

I got this message:" Software Update Update failed Something is trying to trick Firefox into accepting an insecure update. Please contact your network provider and seek help." What on earth is this about? I am not computer savy.

taken from https://support.mozilla.com/en-US/questions/826858:
''This issue can be caused by the presence of leftover files in the Firefox program folder (defaults\pref) like a file all.js or firefox.js''
''Download a fresh Firefox copy and save the file to the desktop.
Firefox 4.0.x: http://www.mozilla.com/en-US/firefox/all.html ''
''Uninstall your current Firefox version and remove the Firefox program folder before installing that copy of the Firefox installer.''
''Do not remove personal data if you uninstall the current version.
It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.''
''Your bookmarks and other profile data are stored elsewhere in the Firefox Profile Folder and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox.''
''If the problem persists See also:
https://support.mozilla.com/en-US/questions/815130?page=2#answer-185385''
Check and tell if its working.

Please adjust your InterneWhat do I do with this message: Please adjust your Internet Security software to allow referring URLs.

I am trying to access Morningstar through my Hennepin County Library Account. When I do so, I get this message:
Sorry, we were not able to authenticate you for access to this resource. Please adjust your Internet Security software to allow referring URLs.
How do I do this?

Hello,
'''Try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
''(If you're not using it, switch to the Default theme.)''
* You can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
''Once you get the pop-up, just select "'Start in Safe Mode"''
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''
Thank you.

Please HELP!! MacBook stuck on "Select your Keyboard" screen after installing Snow Leopard on a brand new hard drive!

Hello, I just recently replaced my internal hard drive in my MacBook [from a 250gb to a blank/empty 750gb]. I managed to get OS X Snow Leopard installed with the DVD. Setup seems to run fine at first, I get the screen in space with the welcome message different languages while music plays. Then I'm asked to select my country, then here is my problem- the next screen asks me to "Select Your Keyboard", I select & click "Continue" button, then my Mac is just showing the spinning beachball & it stayed that way all night =( I don't know how to fix this. Anyone experience this or have any solutions for me? I'd appreciate any help! Thank you! [I've been googling since yesterday with no luck on finding an answer].

It's diagnostic software. It's supposed to help you find problems. I don't think anyone is making any software yet that fixes hardware problems.
That said, the two comments:
Le husky wrote:
Macbook pro freezes for no reason even after installing 10.8 on a brand new hard drive....
.....also my trackpad is behaving very erraticaly sometimes, it's like it is possessed by a ghost....
would lead me to think it's the logic board. On older MacBook Pro's both the USB I/O ports and the keyboard/trackpad are fed out of an integrated USB controller integrated into the South Bridge I/O controller. On newer models, the USB ports come out of an integrated North/South bridge controller and the keyboard/trackpad are handled by an SMC controller, which itself interfaces with the I/O controller. All of these items are on the logic board, and they're all unrepairable.
...unless of course the "internal drive [that] is installed in a cheap external case" is itself causing the problems. Another thing to try might be a different USB port, if you haven't done so already.
I didn't know the price for Scannerz went up. I could have sworn I only paid 30-some bucks for it. Maybe it was on sale at the time. I don't remember.
In any case, good luck.

I can not open Firefox. Keep getting the error message "Failed to read the configuration file. Please contact your system administrator." What do I do?

I can not open Firefox. I keep getting the message "Failed to read the configuration file. Please contact your system administrator." I have tried uninstalling Firefox and then reinstalling it but without success. What should I do?

Which Fx version? When you uninstalled Fx, did you reboot computer before reinstall?
Also, check for / delete any leftover files in the Fx programs install folders, before reinstall?
Is your profile in the default location or custom location?
Have you tried creating a new, completely clean profile - to test (then make sure to select that profile to start Fx - from the Profile Manager)? (no addons or plugins installed).
Does the user acct (that Fx fails under) have access ("rights") to all locations - especially for Fx profiles location?

HT6030 I have 2011 iMac it came with os x 10.6.6 i just upgraded the hard drive and now i cannot install OS X 10.6.6 every time i start installing after selecting the language it come up with error " OS X can't be installed on this mac " please help

I have 2011 iMac it came with os x 10.6.6 i just upgraded the hard drive and now i cannot install OS X 10.6.6 every time i start installing after selecting the language it come up with error " OS X can't be installed on this mac " please help

Be sure to start your iMac using its original grey System Install DVD: Insert that disc and start your Mac while holding the d key. At the Mac OS X Utilities screen select Disk Utility and format the hard disk. Select "Mac OS X Extended (Journaled)".
Then, install OS X.

Message "please select a source"

Opened Lightroom. Thumbnail images displayed across bottom of screen. See message "Please select a source". Under Folders, I see folder that contains the images highlighted, but the triangular leader is not solid, it's dotted. What do I do here to select the source ?" Has Lightroom lost track of where the images were Imported from? I've scoured Lightroom's windows and menus with no luck. I know this will probably be embarrasingly easy. Thanks.

Opened Lightroom. Thumbnail images displayed across bottom of screen. See message "Please select a source".
Did this message appear simply when you opened Lightroom and did nothing else? Or did you click on something, a button or a menu command or an icon? If so, what did you click on?
Are there question mark icons on the folders? Are the photos on an external hard drive that isn't plugged in (or under Windows, the drive letter has changed)?
Please give us all these details, plus also the version of Lightroom, and your operating system, and anything else that is relevant. If you could show us a screen capture, that would be great. The more information you can give us, the better chance we have of helping you.

SQL Developer 4.0 Early Adopter 2 - avoid "Please amend your code to something like this" message

When I edit PL/SQL packages or sql queries in SQL Developer 4.0 Early Adopter 2,
when i copy/paste SQL code, sometimes "Please amend your code to something like this: "select * from when", or "begin when; end;" appears.
Sometimes SQL Developer freezes.
Can I avoid that message (turn off some kind of checks in SQL Developer properties)?

This has been raised/documented fixed in future releases here:
EA42 - Ambiguous Context Pop-up

I keep getting an error message when trying to log on to FaceTime and iMessage on my iPad mini with wifi...could not sign in. Please check your network connection and try again. Help!

I keep getting an error message when trying to log on to FaceTime and iMessage on my iPad mini with wifi...Could not sign in. Please check your network connection and try again. Help!

Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
http://tinyurl.com/a7odey8
Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
Using FaceTime and iMessage behind a firewall
http://support.apple.com/kb/HT4245
iOS: About Messages
http://support.apple.com/kb/HT3529
Set up iMessage
http://www.apple.com/ca/ios/messages/
Troubleshooting Messages
http://support.apple.com/kb/TS2755
Setting Up Multiple iOS Devices for iMessage and Facetime
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
FaceTime and iMessage not accepting Apple ID password
http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
Unable to use FaceTime and iMessage with my apple ID
https://discussions.apple.com/thread/4649373?tstart=90
For non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
 Cheers, Tom

Please select your language message

Similar Messages

Maybe you are looking for