Please share the mibs that support to MPLS-TE LSP attributes feature

I am not able to find the mibs provided by the 12.0(26)s and 12.4T releases to support the MPLS-TE LSP attributes feature
Please share mibs for this feature.
Regrads,
Sasikanth

Hi
this link could help :
http://tools.cisco.com/Support/SNMP/do/BrowseOID.do?local=en&translate=Translate&objectInput=1.3.6.1.3.95
More generally, those 2 link are useful for SNMP:
http://cisco.com/public/sw-center/netmgmt/cmtk/mibs.shtml
http://tools.cisco.com/Support/SNMP/do/SearchOID.do?local=en&step=1
(need a CCO account I guess)
have fun
olivier

Similar Messages

How can I fix the Runtime Error R6034 so that I can correctly install iTunes on my PC ? I get a notice that states ' An application has made an attempt to load the C runtime library incorrectly - Please contact the application's support team for more info

How can I fix the Runtime Error R6034 so that I can correctly install iTunes on my PC ? I get a notice that states ' An application has made an attempt to load the C runtime library incorrectly - Please contact the application's support team for more info

Hey Debbiered1,
Follow the steps in this link to resolve the issue:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
When you uninstall, the items you uninstall and the order in which you do so are particularly important:
Use the Control Panel to uninstall iTunes and related software components in the following order and then restart your computer:
iTunes
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support (iTunes 9 or later)
Important: Uninstalling these components in a different order, or only uninstalling some of these components may have unintended affects.
Let us know if following that article and uninstalling those components in that order helped the situation.
Welcome to Apple Support Communities!
Take care,
Delgadoh

How to configure Time-sheet in Project server 2013 please share the doc with screen shot

How to configure Time-sheet in Project server 2013 please share the doc with screen shot
Thanks and Regards, Rangnath Mali

Hi,
Please refer to the following Youtube video and article.
https://www.youtube.com/watch?v=lZWvg4q17JE
https://support.office.com/en-sg/article/Set-up-timesheets-and-task-status-672fa06f-8c4b-4e43-bfbc-4c355d681605
Please don't forget to mark it answered, if your problem resolved or helpful.

As i am fresher Please share the doc of ECMA script using java script in SharePoint 2013 also how we can insert,update,delete records in list using ECMA script.

As i am fresher Please share the doc of ECMA script using java script in SharePoint 2013 step by step also how we can insert,update,delete records in list using ECMA script.
Thanks and Regards, Rangnath Mali

Hi,
According to your post, my understanding is that you want to use JavaScript to work with SharePoint list.
To create list items, we can create a ListItemCreationInformation object, set its properties, and pass it as parameter to the addItem(parameters) function
of the List object.
To set list item properties, we can use a column indexer to make an assignment, and call the update() function so that changes will take effect when you callexecuteQueryAsync(succeededCallback,
failedCallback).
And to delete a list item, call the deleteObject() function on the object.
There is an MSDN article about the details steps of this topic, you can have a look at it.
How to: Create, Update, and Delete List Items Using JavaScript
Thanks & Regards,
Jason
Jason Guo
TechNet Community Support

Microsoft Visual C Runtime Library Runtime Error! Program: C:\Program Files (x86)\iTunes\iTunes.exe R6034 An application has made an attempt to load the C runtime library incorrectly. Please contact the application's support team for more information.

Microsoft Visual C++ Runtime Library Runtime Error! Program: C:\Program Files (x86)\iTunes\iTunes.exe R6034 An application has made an attempt to load the C runtime library incorrectly. Please contact the application's support team for more information.
Microsoft Visual C++ Runtime Library
Runtime Error!
Program: C:\Program Files (x86)...
R6034
An application has made an attempt to load the C runtime library incorrectly.
Please contact the application's support team for more information.
OK

Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components; this won't normally affect its library, but that should be backed up anyway.
(99146)

Auto tab focus method is not working in iOS devices please share the ideas why its not working?

Auto tab focus method is not working in iOS devices. Please share the idear i am facing this issue while developing code for devices.

Hi there,
I can confirm this bug.
Not sure if this info is relevant, but this is my experience:
I am on the FIDO network, and so are two other people I know.
We all tried blocking numbers, and calls ring right through. Text messages are blocked successfully. (never tried facetime)
I also tried a ROGERS device running IOS7, and was successfully able to block my phone call from ringing through. HOWEVER, my call was forwarded to their voicemail, I was able to leave a voicemail for the person, and they did get an alert that they had a new voicemail.
I have not yet had a chance to test this on Bell, Telus, or any other carriers.
Spoke to Apple, and they advised me to do a hard reset (hold both buttons to shut off and reboot the phone), and if that fails to do an iOS restore.
I have yet to try this, but hopefully someone will have a better solution.

This application has requested the runtime to terminate it in an unusual way please contact the application's support

I randomly get this error message "This application has requested the Runtime to terminate it in an unusual way. Please contact the application's support."
Here's a picture of it. http://i48.tinypic.com/35hradh.jpg
It doesn't tell me what application or process is responsible. :/
It pops up randomly when I wait long enough. It will pop up even if I don't have anything open and I just leave my computer to idle. When I close it or click okay, windows explorer gui will crash and restart. I can still use the computer after this without
restarting but again if I wait long enough it will occur again. I've look around and tried many solutions but nothing has worked.
I've tried a full virus scan, and malware scan with no luck. Tried the registry cleaner from CCleaner and doesn't fix it. I've ran it in safe mode and the error didn't seem to occur or maybe I didn't wait long enough (30-40 minutes). I've tried a SFC
scan and nothing comes up as wrong. I've done a cleanboot several times with no help. I can't do a system restore since the latest restore point is on the same day that I got the error unfortunately.
When the error occurs the pop up window is from Microsoft Visual C++. I've tried uninstalling and reinstalling Microsoft Visual C++ for my 2010 versions but with no luck. I've uninstalled the recent programs that I installed and no help either.
In the event viewer, it shows that there is an error and the source is an application error. The details are...
Faulting application name: Explorer.EXE, version: 6.1.7600.16768, time stamp: 0x4d6878c3
Faulting module name: msvcrt.dll, version: 7.0.7600.16930, time stamp: 0x4eeaf834
Exception code: 0x40000015
Fault offset: 0x0005620a
Faulting process id: 0x980
Faulting application start time: 0x01cdf12d86b1dd89
Faulting application path: C:\Windows\Explorer.EXE
Faulting module path: C:\Windows\system32\msvcrt.dll
Report Id: d1f9cfa3-5d22-11e2-94b5-001fd0d13411
The event that always follows after this one is always a Windows Error Reporting Log.
Fault bucket 2836122452, type 1
Event Name: APPCRASH
Response: Not available
Cab Id: 0
Problem signature:
P1: Explorer.EXE
P2: 6.1.7600.16768
P3: 4d6878c3
P4: msvcrt.dll
P5: 7.0.7600.16930
P6: 4eeaf834
P7: 40000015
P8: 0005620a
P9:
P10:
Attached files:
C:\Users\Dennis\AppData\Local\Temp\WER2815.tmp.WERInternalMetadata.xml
These files may be available here:
C:\Users\Dennis\AppData\Local\Microsoft\Windows\WER\ReportArchive\AppCrash_Explorer.EXE_4dd84d182b87996cc0ddaff5b22f2f6085c2259_10063f95
Analysis symbol:
Rechecking for solution: 0
Report Id: d1f9cfa3-5d22-11e2-94b5-001fd0d13411
Report Status: 0
I checked the process that the error message window links to and it is explorer.exe but I'm not sure what I can do since it's an essential windows file and I can't just delete it.
Anyone have any ideas what is going on?
Thanks.

Hi ,
Do you remember if you have installed some software prior to this issue?
Delete programs you never use.
If the issue reoccurs in Clean Boot, but works fine in Safe Mode, the cause may be the disabled hardware drivers. You may narrow down the
causes in Device Clean Boot.
Device Clean Boot
=================
1. Click Start, type "devmgmt.msc" (without quotation marks) in the Search bar and press Enter.
2. Expand "Sound, video and game controllers".
3. Right click on your sound card and then click "Properties.
4. In the dropdown menu of Device Usage, please choose "Do not use this device (disable)" and click OK.
5. Please use the same method to disable other dubious hardware such as: internal modem, network card and CD-R drive. Please note some devices
such as video adapter are not available to be disabled.
Tracy Cai
TechNet Community Support

I did an auto-update on itunes today and now itunes is unresponsive..it gives this error "An application has made an attempt to load the C runtime library incorrectly. Please contact the application's support team for more information."

I did an auto-update on itunes today and now itunes is unresponsive..it gives this error "An application has made an attempt to load the C runtime library incorrectly. Please contact the application's support team for more information."
Wouldn't apple check before releasing new version, I see so many people with same issue..its such a waste of time for everyone now to fix it.
Is there any other way to fix before I try to un-install everything and re-install back?

Hello iTunes_Bad_Update,
The following article provides information and troubleshooting steps that can help get iTunes back up and running.
iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
http://support.apple.com/kb/TS1717
Cheers,
Allen

Please share the URL for downloading Weblogic 8.1 with admin server

Hi,
Could you please share the URL for downloading the weblogic 8.1 server with admin option for redhat llinux.
Also could you please me whether we can download the installation guide from some site, I want to do a silent installation of same.
Regards,
Balu.

Hello, you still seem to be pointing people to site(s) that [www.certguard.com] indicates may lead them to lose their certifiaction: viewers please also see also the route you choose ... The Route You Choose
Edited by: bigdelboy on 01-Jun-2009 08:39 (Please note this refers to a spamming post not to the original post of the thread).

"Please select a calendar that supports tasks" How?

All the Task related buttons are grayed out and when I try to do anything related to tasks it says "Please select a calendar that supports tasks. But I cannot find the way to do this anywhere.

Duplicated topic, please, continue here:
*[https://support.mozilla.org/questions/990678 questions/990678]

Please share the possible T code in MM of ERP to validate the data of MM bex Queries.

Dear All,
Please share the possible T code in MM of ERP to validate data of MM Standard bex Queries.
Thanks
Regards,
Sai
Basic Qs
Message was edited by: Pravender Kumar

Try something like this..
data : lv_flag .
LOOP AT GT_ZKPC2 INTO GS_ZKPC2.
ld_amount = ld_amount + GS_ZKPC2-SALK3
at end of prctr.
lv_flag = 'X'.
endat.
at end of prctr1.
IF LV_FLAG = 'X'.
ld_amount = ld_amount + GS_ZKPC2-SALK3.
move GS_ZKPC2-BUKRS_VF to GS_ZKPC3-BUKRS_VF.
move GS_ZKPC2-PSPNR to GS_ZKPC3-PSPNR.
move gs_zkpc2-konts to GS_ZKPC3-BUKRS_VF.
move GS_ZKPC2-ALOC_SAKHA to GS_ZKPC3-ALOC_SAKHA.
move gs_zkpc2-prctr to gs_zkpc3-prctr.
move GS_ZKPC2-SALK3 to GS_ZKPC3-SALK3.
move gs_zkpc2-prctr1 to gs_zkpc3-prctr1.
move ld_amount TO GS_ZKPC3-RAMOUNT.
APPEND GS_ZKPC3 TO GT_ZKPC3.
clear: gs_zkpc3,ld_amount.

CLEAR LV_FLAG.
endat.
endloop.
Thanks
mahesh

Can somebody please fix the mess that is iBooks?

can somebody please fix the mess that is iBooks? lousy metadata, lousy usability, and now fails to read my library until I delete it from the filesystem then rebuild it. reboot, and it's screwed again. do you need someone to run the iBooks development program? please let me know.

For Apple to see your message, best repeat it at
http://www.apple.com/feedback

What are the objects that support documentation?

What are the objects that support documentation?

Hi
Master data is data that remains unchanged over a long period of time. Master data contains information that is always needed in the same way. Characteristics can bear master data in BW. With master data you are dealing with attributes, texts or hierarchies.
If characteristics have attributes, texts, or hierarchies at their disposal then we speak of master data-bearing characteristics.
Few types of Master Data
1) The master data of a cost center contains the name, the person responsible, the relevant hierarchy area, and so on.
2) The master data of a supplier contains the name, address, and bank details.
3) The master data of a user in the SAP system contains his/her access authorizations to the system, the standard printer, start transaction, and so on.
Use
When you create a characteristic InfoObject, it is possible to assign attributes, texts, hierarchies, or a combination of this master data to the characteristic. If a characteristic bears master data, you can edit it in BW in master data maintenance.
Master data for a characteristic is uploaded into BW using an InfoSource with direct updating.
You can also update characteristics with master data flexibly. In this case the InfoObject becomes the data target or InfoProvider. However, you must explicitly declare the InfoObject in the InfoObject maintenance to be the InfoProvider.
See also InfoSources with Flexible Updating.
Learn more @
http://help.sap.com/saphelp_nw04/helpdata/EN/28/4c1738da41e57ee10000009b38f842/frameset.htm
Regards
AB

What are the objects that support variables?

What are the objects that support variables?

Using Variables: The Variable Wizard and the Variable Editor
Definition
Variables are parameters of a query that you defined in the Query Designer and that are filled with values when you execute the query or Web application. They serve as a store for characteristic values, hierarchies, hierarchy nodes, texts and formula elements, and can be processed in different ways.
The processing type determines how a variable is filled with a value for the runtime of the query or Web application.
There are different types of variables depending on the object for which you want to define variables. These types specify where you can use the variables.
Variables are reusable objects. This means that when you define a variable for a query in the Query Designer, this variable can be used in all other queries. Variables are not dependent on the InfoProvider, only on the InfoObject. A variable that you define for an InfoObject is available in all InfoProviders that use this InfoObject.
Use
Variables enable you to customize queries flexibly (parameterize the query) possible. If you use variables in the Query Designer, do not select any fixed characteristic values, hierarchies, hierarchy nodes, texts, or formula elements. Instead, set up variables as place holders. These are then filled with values when the query is running (when you insert the query into a workbook, when you refresh the workbook or when you execute the query on the Web. You can use one query definition as the foundation for many different queries if you use variables.
You want to create one query for all the people responsible for customer groups, who each only evaluate the data for one customer group. In the Query Designer, you insert a variable for the characteristic u2018customer groupu2019. Just before the query is executed, decide for which customer group(s) you want the query to apply to.
There are two tools in the Query Designer for designing and changing variables.
The variable wizard takes you step-by-step through the process of defining a variable. Each individual step is context-sensitive and is adjusted according to the combination of variable and processing types used. This means that the variable wizard only offers the selection options that are permitted for that combination of variable and processing types. For more information, see Defining Variables with the Variable Wizard.
The variable editor dialog box offers all of the selection options for changing an existing variable. The individual fields in the dialog box show the settings affected in the variable. You can change these settings here. If you want to make the changes using a step-by-step process with explanatory texts, you can jump to the variable wizard using . For more information, see Changing Variables in the Variable Editor.
Integration
The variable wizard and the variable editor are functions in the Query Designer and are context-sensitive.
In principle, the two dialog boxes appear wherever you can enter constants (that is, values) in input fields. One of these input fields is the Entry of Variables checkbox. If you select this option, the following options for using a variable appear, instead of a fixed value:
·        The variables that are available appear in the dropdown box for the input field. You can select a variable from the dropdown box.
·        The symbol Change Variable appears next to the Entry of Variables checkbox. You can change the variable using . The Variable Editor dialog box appears.
·        The symbol New Variable appears next to the Entry of Variables checkbox. Choose if you want to create a new variable. The Variable Wizard dialog box appears.
By way of an example, when defining conditions for the value limit of the condition, you can not only enter fixed values but also formula variables. Mark the Entry of Variables checkbox and you can then use the options described above. The settings are context-sensitive so that the formula variables that only those formula variables that are available appear in the dropdown box. The variable wizard is set up automatically in the same way for entering formula variables.
You can also get to the variable wizard and the variable editor from the context menu of those objects for whose values you can define variable placeholders. From the context menu, choose New Variable. The SAP BW Variables Wizard appears. In the context menu for variables that have already been defined, you can choose Edit. The SAP BW Variables Editor appears.
In the InfoProvider objects dialog box, you select a characteristic (for example, Order) and from the context menu, choose New Variable. You reach the variable wizard, which is already set up for you to enter a characteristic value variable.
In the InfoProvider objects dialog box, you select a characteristic value variable and from the context menu, choose Edit. You reach the variable editor where you see all of the settings for the variable. You can make changes to the variables here.
Variable Types
Definition
The type of variable being used. This determines the object that the variable represents as a placeholder for a concrete value.
Structure
There are different types of variables depending on the object for which you want to define variables. These types specify where you can use the variables.
·        Characteristic Value Variables
Characteristic value variables represent characteristic values and can be used wherever characteristic values are used.
If you restrict characteristics to specific characteristic values, you can also use characteristic value variables. See, Restricting Characteristics.
·        Hierarchy Variables
Hierarchy variables represent hierarchies and can be used wherever hierarchies can be selected.
If you restrict characteristics to specific hierarchies or select presentation hierarchies, you can also use hierarchy variables. See Selecting Hierarchies
·        Hierarchy Node Variables
Hierarchy node variables represent a node in a hierarchy and can be used wherever hierarchy nodes are used.
If you restrict characteristics to specific hierarchy nodes, you can also use hierarchy node variables. See Restricting Characteristics: Hierarchies
·        Text Variables
Text variables represent a text and can be used in descriptions of queries, calculated key figures and structural components.
You can use text variables in the description of calculated key figures, restricted key figures, selections and formulas when you create them. See Defining Calculated Key Figures, Defining Restricted Key Figures, Defining Selections, and Defining Formulas.
You can change the descriptions in the properties dialog box. See Query Properties Calculated Key Figure Properties Restricted Key Figure Properties, and Selection/Formula Properties.
·        Formula Variables
Formula variables represent numerical values and can be used in formulas. See Defining Formulas.
In addition, numerical values are used for selecting exceptions and conditions and you can also use formula variables here. See Defining Exceptions and Defining Conditions
You can use a formula variable for the interest rate in order to process the current interest rate, after you have executed the query or Web application.
http://help.sap.com/saphelpnw04/helpdata/en/e3/e60138fede083de10000009b38f8cf/frameset.htm_

I lost my mini iPad in Peru, Machu Pichu area and I do not know how to use the find my iPad ... can you help???? please, before the person that found it unblock and use it

I lost my mini iPad in Peru, Machu Pichu area and I do not know how to use the find my iPad ... can you help???? please, before the person that found it unblock and use it

Did you enable the "Find my..." function BEFORE you lost it?

Please share the mibs that support to MPLS-TE LSP attributes feature

Similar Messages

Maybe you are looking for