Please share your experience with the universal dock for iphone 3g

Hi There,
1. Can people share their experience of the universal dock with the iphone 3g adapter. My concern is that does the tight fit scratch the black lower back of the iphone plastic everytime we remove it or put it in? OR is there enough gap for the iphone to slip in and out without scratching.
2. Anyone having issues with the universal dock or does it work fine for most?
thanks in advance,
cheers,
Sunil

Thanks for your advice.
I recently purchased a universal dock for my iphone 3g. It works great. I just had one question. When my iphone is sitting on it for lets say 20 - 30 minutes. Then if i press the buttons on the remote. nothing happens! If I then press the home button while it is on the cradle then, the remote, it plays music. There after lets say if I stop stop the music through the remote and again press the remote button after a few minutes it starts playing. So what happens after a long time. Why do i have to press the home button on the iphone for the remote to work. Is that how it is supposed to work???
Thanks

Similar Messages

Can you view the iPod menus on your television with the Universal Dock?

I recently bought a decent universal dock knock off for my iPod, but one of my biggest gripes is that I am not able to view my iPod menus screen on my television. Does the Apple Universal Dock give you this ability?

Hello there,
No, there is no such feature with the universal dock. If you wish to a have a dock with this kind of functionality, maybe check out this one below.
http://www.amazon.com/DLO-009-9765-HomeDock-Deluxe-iPod/dp/B000ELDX2W
Or this one.
http://www.amazon.com/Ipod-Ready-Pioneer-Elite-Receivers/dp/B000IWL77U
Hope this helps.
B-rock

Does Av digital adapter works with the universal dock for remote control?

if I only connect the Lightning to 30 pin adapter to the universal dock for remote control it works so good with music, spotify, Netflix, YouTube etc.
but if I add the av digital lightning adapter to watch on Tv, the dock and remote control don't work anymore what can I do? I want to watch stuff on tv and use the IR dock for remote control please help me what's going wrong?

Thanks for your advice.
I recently purchased a universal dock for my iphone 3g. It works great. I just had one question. When my iphone is sitting on it for lets say 20 - 30 minutes. Then if i press the buttons on the remote. nothing happens! If I then press the home button while it is on the cradle then, the remote, it plays music. There after lets say if I stop stop the music through the remote and again press the remote button after a few minutes it starts playing. So what happens after a long time. Why do i have to press the home button on the iphone for the remote to work. Is that how it is supposed to work???
Thanks

Upgrade R11.5.10 to R12.1.3-- please share your experience

Please help me to note the most important steps while upgrading Oracle financials from 11i to R12.
Assuming client has GL, AP, HR, Payroll, ipayments ( R11.5.10 to R12.1.3)
Please share your experiences. It will be a greta learning experience for us.
Thanks in advance

user13648035 wrote:
Please help me to note the most important steps while upgrading Oracle financials from 11i to R12.
Assuming client has GL, AP, HR, Payroll, ipayments ( R11.5.10 to R12.1.3)
Please share your experiences. It will be a greta learning experience for us.
Thanks in advancePlease see old threads for similar discussion -- https://forums.oracle.com/forums/search.jspa?threadID=&q=Upgrade+11+to+R12&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
Thanks,
Hussein

Can you please share your experience in implementing / upgrading the Primavera EPPM R8.3?

Hi,
In our company various versions (V7, R8.1 and R8.3) of Primavera being used in various locations. To bring all the location to a common platform, management has decided to implement / upgrade Primavera EPPM P6 R8.3 and also planned to integrate Primavera P6 R8.3 EPPM with Oracle (EBS) Projects application . Hence, If any of you implemented Primavera P6 EPPM R8.3 or upgraded the earlier versions to Primavera P6 R8.3. Please share your ideas and also the pros and cons of implementing R 8.3 EPPM. For your information we are going to have SQL database since all the existing databases are in SQL.
Please share your ideas and experiences.

Hi,
we have done a lot of implementations and migrations to the P6 EPPM R8.3 from different former versions and this is working fine. the dbsetup does a good job.
A good way in my point of view is to set up a new P6 EPPM R8.3 system with a new PMDB Instance which will keep the configurations so that you easily can migrate or exchange the instances. Always remind to have a validated backup of any instance before migrating.
Before migration you should mind the following points:
The source version of the old P6 PMDB instance is:
P6.2.1 or before => first you need to migrate it to P6 V7.0 before you can migrate it to P6 R8.3
P6 V7.0 => check if you have used P6 WebAccess: if not okay, else check if you used jackrabbit (look for migration tool), Workflows (close all before migrating); Check if using Jobservice XER-Export (no longer available); Jobservice Batchreport (only Workaround available see Knowledgebase); Risks in the P6 Client (need to be manually migrated)
P6 R8.0 to R8.2 => Using Extended Schema, Enterprise Reporting Database, own BI Publisher Reports => Check stept to be taken for migration
Other questions are:
Which authentication method will you use (native, LDAP, SSO)? If not using native and you want to connect the BI Publisher then you need also to use that authentication there.
The migration itself is pretty easy if you take care that all sessions are closed (no users or unclosed primavera sessions settings on that instance, stop all Applications, interfaces or Services connected to the instance. Cleanup your refrdel_deletes, logical_deletes and (if used before), extended Schema tables.
Then you can migrate with dbsetup, use additional Service Packs and Fixpacks (actually Service Pack 1) on the instances and then you can connect them into the environment by adding it to the P6 Configuration.
I mentioned you don't want to put all data into one final PMDB-Instance.
Regards,
Daniel

Please help with the Universal Dock issue!!!

Hi,
I recently purchased a universal dock for my iphone 3g. It works great. I just had one question. When my iphone is sitting on it for lets say 20 - 30 minutes. Then if i press the buttons on the remote. nothing happens! If I then press the home button while it is on the cradle then, the remote, it plays music. There after lets say if I stop stop the music through the remote and again press the remote button after a few minutes it starts playing. So what happens after a long time. Why do i have to press the home button on the iphone for the remote to work. Is that how it is supposed to work???
Thanks,
Sunil

Hello! Am i the only one facing this issue?????

Table controlled partitioning - please share your experiences.

hello ,
is anyone using table controlled partitioning in the sap on db2 for z/os enviroment?
can you please share your [good/bad]experiences on the subject ?
is there anything we should all watchout for ?
thanks
omer brandis
visit the sap on db2 for z/os blog
http://blogs.ittoolbox.com/sap/db2/

hello ,
is anyone using table controlled partitioning in the sap on db2 for z/os enviroment?
can you please share your [good/bad]experiences on the subject ?
is there anything we should all watchout for ?
thanks
omer brandis
visit the sap on db2 for z/os blog
http://blogs.ittoolbox.com/sap/db2/

Apple Composite AV cables with the universal dock

Hi,
I have a classic iPod 80gb w/video (i think it's 5th generation)
I recently purchased the Apple composite AV cables to listen to my ipod via the RCA inputs on my stereo's receiver. This works well.
It also has a USB cable attached so I can charge the ipod while I listen to music.
I wanted to purchase the universal dock so I can replace my old CD changer and have a nice looking iPod sitting in a nice dock where the cd changer used to be. Plus the remote would come in handy.
Since my composite cables play music and charge I figured I'd just plug the 30-pin adapter into the back of the dock and pop my ipod into the dock (i realize I'll probably need a dock apadter for my classic ipod) and i'd be able to play music and charge the ipod.
I spoke with an Apple salesmen who says that this woun't work, I need to buy a headphone (3.5 mm) to RCA adapter cable for the audio and the USB 30pin plug is only for charging.
But right now, without the dock it does both, so does anyone know if this sales person is correct? They had to do a lot of research so I know he didn't know first-hand.
Has anyone tried this?
I'd hate to have to buy a 3.5 mm to rca cord and then not use the 39 cables I just purchased.
Thanks so much for any help.

Your 3 rca connector comes with video (yellow) and audio (red and white) and the other one is usb which you can use for charging if you plug the charger on it. no need to plug 3.5mm mono jack.

Share my experiences with the B520 Model

I have purchased the Lenovo All-In-One desktop computer model B520 on Nov 15th. It arrived in my office on Nov 21st. It’s been a month now after using it, I would like to share my thoughts about it.
Pros:
Saves space, this is the biggest advantage of AIO desktop; this is the primary reason that why I have switched. Computers with a case and a separated monitor is a big issue for me. I never liked these cables for mouse, keyboard, speakers, …etc. it causes a huge mess under the desk. Now, with the All-in-one style, everything is simplified. The only cable I need for this B520 Lenovo desktop is for the power source. It’s designed with different wireless technologies. Mouse and Keyboard are connected through Bluetooth; The system has build-in with the latest 802.11b.g.n WiFi wireless technology. It also has the enhanced integrated 5.0 speakers system that supports SRS Premium Sound Audio.
High Performance, out of all the All-In-One desktop models out there in the market, this machine has the highest hardware specifications. Quad Core Intel 2nd Generation CPU i72600 with Hyper Thread Technology. This is a really powerful CPU, it gives its best performance when it comes with Video Rendering and image processing. Word processing and gaming is a piece of cake for the it to handle. I do a lot of video editing so I will only chose this model of CPU.
The B520 model also comes wit a Nvidia Geforce GT555M. This is a middle class close to a high end video card. It handles most of the 3D games in an acceptable setting, but will not be able to run games like BF3 or Crysis kind of games in high settings. This machine is not for serious gamers, because All-in-one desktops has the performance bottleneck with the video card. Computer manufacturing have to keep down the power it consumes to prevent the machine from over heating. High end video cards all have a very high demand for powers, at same time produces huge amount of heat. This is why there are a lot of people start to customize their own computer cases with water cooling system. It is more sophisticated and comes with a lot of trouble. If you want to have something easy, well organized, and just simply works, go for All-In-One. You will love it.
The Lenovo B520 comes with a Touch Screen, which I don’t usually use that often. If there are kids in the family, it will be a fun toy for them to play with. What I like better, is the Bluetooth mouse. The unique part about this mouse is that it has a build in gravitational sensor, means, this mouse is functional in the middle of nowhere, even hanging in the air. You can imagine using it like a Wii game controller.Just move the mouse and wave it in the air and you will see the cursor on the screen goes where ever you are pointing. How accurate is it? very accurate!! it’s is more sensitive and feels better than using a Wii controller. Lenovo has pre-install some games that can be played interactively with the mouse. The screen is 23″, so it would be a fun experience. I don’t have any kids in the house, so I uninstalled them all to save some disk spaces and speed up the system a little bit.
The keyboard and mouse are both connected by Bluetooth; I also noticed that every time when I start the computer, it takes about 2-3 seconds for them to become effective. I assume Lenovo has designed it with a “sleep feature” for this two devices; it helps to save battery and extend the replacement cycle.
The computer also comes with a 3D glasses. The touch screen has a very high refreshing rate(120Mhz) which is better for the eyes. The screen works interactively with the 3D glasses. When the computer is playing a movie in 3D format, when I wear the 3D glasses and facing the screen, it automatically turns on and I am in 3D mode!!! It supports a lot of 3D games too!! The feeling in a racing car 3D game is UNBELIEVABLY REAL!! I love it so much! It’s a TOTALLY NEW LEVEL of gaming experience!
Also, Lenovo has designed 4 slots for memory modules. they have installed 8GB onto two slots and there are another 2 slots available to use. This is very useful for people like me demands for more rams. It also provides four USB 2.0 and two USB 3.0 port; more than any other All-in-one desktops on the market. The 5 in-one card reader is convenient for uploading photos from cameras. two HDMI ports, I can also connect my PS3 or Xbox360 to it if I want to use it’s 3D touch screen. It has a building TV tuner, so watching TV on it is another feature.
Cons:
Even the computer is very well designed, as a high end user I found there are still a couple places that Lenovo can improve.
1. Lenovo has researched and developed this RapidDrive technology; I see this is an option on the Spec-sheet for the product, but I never had the chance to upgrade it. I demand for a high disk performance; I was a little disappointed when I found out that I wasn’t able to install another SSD high performance disk into the computer. I had to take out the 2TB standard disk drive and replace it with the SSD. It would be really nice if I can have the high performance SSD installed as the system drive, and the HD installed as the storage drive. The RapidDrive technology may become failing out now, because it was from those years that SSD weren’t popularly used. Compare to the present, SSD is getting more and more popular, the SSD is improving it’s performance and lowering it’s cost. In the next one or two years, the RapidDrive technology will likely become a history.
2. I have opened the B520 model to see the inside modules. I see there are still plenty of spaces that Lenovo engineer can use to expand the upgrade capacities. I can use some simple tools to modify the inside body a little bit to fit another hard drive, but it stopped me from doing it because there is not another power cord connector. Those extra mSata connectors are sitting there and watching me could do anything about it; = (
3. Lenovo technical support did not have a most updated tech sheet for their system. Again, I am a tech kind of guy. I was looking for a manual to better understanding the B520 motherboard.(so I can modify it and add some extra hardware to it) I have called their technical support, talked to people, went through their online data base, they weren’t able to provide me this manual. The lastest information they have is for the previous model. The B520 Model I have a the newest I believe. Lenovo should keep up with their technical support, and be prepare for experienced users.
Conclusion:
I am satisfied with it. I feel I have made a great purchase. Would be nice it I can install an additional SSD in there. Would nice if they can put a high end video card in there. Good for home offices, and home entertainments. Not recommended for hardcore gamer.
Price: 4.5 / 5
Performance: 4.5 / 5
Exterior Design: 5 / 5
Interior Design: 3.5 / 5
Customer Service: 4.5 / 5
Time from order to receive the product: QUICKLY
Other thoughts:
When I was doing my research on All-In-One, here are the reasons that why I have chosen Lenovo:
1.Sony has a well designed for their product, but the price is high. Most importantly, the video card they have is Nvidia Geforce 540M GT, and it only supports 8GB of ram, not 16 GB.
2. Toshiba has terrible customer services for technical support. I had a very bad experience with them. I believe they have out sourced it to India base companies. When the computer is out of warranty after 1 year, they charge a $35(or $30)dollars troubleshooting fee. I think this is ridiculous to charge the consumer to talk over the phone to find what is the problem with their product.
3. Dell has better customer service than Toshiba; They do not charge for talking and providing the technical support after warranty, but when it comes with parts replacement, that is something we have to pay which is understandable. However, one thing I really don’t like Dell computers is that they install a LOT of junks onto your machine when you buy it. It’s fully loaded with all these third party softwares who pays Dell for more users. It not only slows down the system, but also generate a lot of garbage uses a lot of disk space. I will reconsider to buy Dell if they give me a clean & Junk-free windows.
4. iMac is also a good choice because it’s well designed too. but I did not chose it because it has very limited expansion ports and they charge insanely more for hard-wares upgrade. They have extreme control over their product from customer modification. They don’t even allow the consumer to replace the hard drive themselves.
5. HP also has wonderful All-In-Ones, but their hardware specs seems weak. Never dealt with HP customer service before, so I will not say anything about their customer services. Hopefully it’s better than Toshiba. = )
also been posted on my personal blog

Thank you for replying.
Where I can buy a seperate RapidDrive?
I couldn't find it on the marcket, or on shop.lenovo.com / http://www.lenovospareparts.com/
With the mSata power splitter, there is a problem.
The data portion and the power portion shares the same connector I belive. I have thought of it but don't know how to make it possible. any suggestions?
the only thing I can find is this : http://www.microcenter.com/single_product_results.phtml?product_id=0317944
but I still need to convert the power connector because it's 4 pin molex;. I guess it should work if I use another 6" Molex to SATA Power Cable Adapter.
Also, I couldn't find which is the SATA 3.0 and Which is the SATA 6.0 connector. SSD will have a huge difference in performace with a SATA 6.0 connector. This is confusing because on the B520 Spec sheet it stated both. I was looking for it's manual to identify, but no one can provides it. Last time when I called, they forwarded my call to Intel. LOL! I was like, **bleep**? It's a board you used and you dont have a manual for it?
Anyways,
Thanks again!

Please share your experiences moving from Quark to InDesign

My company's design group is pushing to move from Quark to Indesign, starting with one of my projects, which is our largest (400 pages), highest profile document (it is currently in Quark, and the plan is to pour the text and graphics into InDesign). Our schedule is very lean--leaving little room for surprises. None of the compositors in the design group have used InDesign. They are expected to recieve some formal training--but only about 1 week's worth total over a period of several weeks. I am all for making the transition to InDesign, but feel that the wiser path to take is to start on smaller and less high-profile documents that have more time in the schedule for the learning curve. However the design manager is adament that the transition will be problem-free. My experience is that any transition like this has bumps, and most are unexpected, and create havoc and panic. This document has only gone to print on time once (in 10+ years)--with me managing the project and with much sweat and tears. My hope that this year we could go to print on time AND do it with less wear and tear on all who work on it. I just don't think this will happen making this tranisiton now. Can anyone share their experiences when they made the transition?

Everyone else has had really good advice about starting with a 400 page doc, particularly if it's complex. If it's just text with a couple illustrations every 4 or 5 pages, it might be do-able, but if it's a complex document with lots of stuff on every page, it could be tricky.
Try this link for the official converter's guide.
http://www.adobe.com/designcenter/indesign/articles/indcs3ip_quarkmigration.pdf
Some practical tips for the beginning XPress converter that I learned the hard way...
- Cmd-shift-click pulls stuff off the master page.
- The lack of master anchors may limit your ability to accomplish certain master page layouts (with prelinked text boxes) that are easy to do in XPress. Everyone here will tell you to simply use the margins to control your text flow, which may or may not work well for your particular case.
- Always scroll around a document by holding down option+spacebar. This insures that you will get the scroll hand tool every time instead of accidentally inserting a zillion spaces into your text.
-Cmd-shift-A deselects everything in a text box so that you can select another tool. There is no next/prev tool shortcut, but rather keys for each tool. (T is text, A is the white arrow, V is the black arrow)
- You "thread frames" rather than "link text boxes" despite how I wrote this. :)
- Don't set text wrap to effect only the stuff underneath in the prefs because...
- All text should go in a separate layer on top of the graphics layer because...
- InDesign dynamically resolves transparency effects at print time, which means if part of your text is layered under a transparent element it may get rasterized.
- If you need to get text to show even when it's on top of an object with a text wrap, select the text box and check the "Ignore text wrap" option.
- Overprint Preview is your friend. It'll help show you all those things that you didn't notice were going to print strangely before you commit them to print. (Overprinting white type, etc)
- When you're just starting out, so is the Flattener Preview because you will start to get a feel for what is going to be bitmapped and what won't.
- XPress documents imported into InDesign should always be exported as Adobe InDesign Interchange and reimported one more time. .inx is the equivalent of the "thumb-nail drag" trick in XPress to clean up a document that is acting funny.
- XPress documents with placed EPS files may come in with the "Non-printing object" attribute checked on some of the EPS graphics. There's a script floating around that Dave Saunders wrote to fix this. Also, turning Overprint Preview will help you spot this (look for the disappearing objects).
- If you are placing EPS objects, be sure to set your import options to "Render preview from postscript" or your previews won't look right and/or may be deceiving.
- Don't every base your paragraph styles off of "Basic Paragraph Style", because if it ever changes in another document your type will suddenly change when you paste it from one document to another.
- Don't base anything off of "Basic Object Style" for the same reasons.
- Your defaults change whenever your change the options in a palette/panel without anything selected. Curious why every new object you draw comes in with a drop shadow or a 3pt rule, for example? You accidentally set those options with nothing selected.
- InDesign's paragraph composer may drive you (or your proof-readers) wonky because it will change the flow of text paragraph-wide if you redo a line of text. You can either adjust it for decent text flow and leave it alone OR turn it off by basing all your stylesheets on single-line composer. People in here will largely recommend option one, but if it doesn't work for your stuff, don't be afraid to disable it.
- Make sure to upgrade to the latest CS3 update, because CS3 v5.00 had some fairly crashy behavior.
- If CS3 feels really sluggish, try turning off page previews in the Pages palette.
- CS3 and OS X 10.5 are not fully compatible yet.
Best of luck! It's not really that big a change, but everything is slightly different so expect a bit of time to really get your feet under you.

Unified Job Monitoring -Share your experiences with SAP Solution Manager 7.1

Dear Forum members,
I woudl like to introduce myself as Raghav, S. I am in the development team responsible for building the unified job monitoring workcenter starting 7.1 SP10 (onwards).
Please post your feedback, current status wrt to setup, commmon issues in this area.
I will be more than glad to help you here.
Regards, Raghav
Development Manager
CLM - Solution manager team, Labs India.

Hello Raghev,
we implemented unfied job monitoring on a larger scale by now, starting out with the monitoring of SAP Standard & Reorg Jobs.
Everything seemed quiet OK at the beginning, but over time display performance of the Monitoring UI decreased drastically (exceeding 5 Min. "per click" in the UI).
I pinned this down to the following (Oracle) SQL access:
SELECT
"CLIENT", "CONTEXT_ID", "TYPE_ID", "HASH_METRIC_PATH", "START_TIMESTAMP", "IS_CURRENT", "END_TIMESTAMP",
"METRIC_PATH", "RATING_AGGREGATE", "VALUE_MIN", "VALUE_MAX", "VALUE_SUM", "VALUE_COUNT", "VALUE_LAST",
"VALUE_DATA_TYPE", "VALUE_MAX_TIME", "LAST_TEXT"
FROM
"MES_DB_AGGREGATE"
WHERE
"CLIENT"=:A0 AND "CONTEXT_ID"=:A1 AND "TYPE_ID"=:A2 AND "IS_CURRENT"=:A3 OR "CLIENT"=:A4 AND
"CONTEXT_ID"=:A5 AND "TYPE_ID"=:A6 AND "IS_CURRENT"=:A7 OR "CLIENT"=:A8 AND "CONTEXT_ID"=:A9 AND
"TYPE_ID"=:A10 AND "IS_CURRENT"=:A11 OR "CLIENT"=:A12 AND "CONTEXT_ID"=:A13 AND "TYPE_ID"=:A14 AND
"IS_CURRENT"=:A15 OR "CLIENT"=:A16 AND "CONTEXT_ID"=:A17 AND "TYPE_ID"=:A18 AND "IS_CURRENT"=:A19
The execution plan used for this SQL is:
0
SELECT STATEMENT
1
INLIST ITERATOR
2
TABLE ACCESS BY INDEX ROWID MES_DB_AGGREGATE
3
INDEX RANGE SCAN MES_DB_AGGREGATECU
MES_DB_AGGREGATE in our case has over 5 million entries.
The parameterization of the DB incl. Memory and all should be OK.
The index range scan simply takes that long.
This might be, because the MES_DB_AGGREGATECU index has the lowest cardinality column (CLIENT) first.
Header 1
Header 2
COLUMN_NAME
NUM_DISTINCT
CLIENT
1
CONTEXT_ID
433
TYPE_ID
2192
IS_CURRENT
2
Could you have your team check on this, because with the situation as is, the Job Monitoring application seemingly becomes non-usable, as soon, as you start to scale up.
Best Regards,
Thorsten

Creative, Is it worth it? (i.e. whats your experience with the Zen 16gb) and Firmware questi

After doing a sizable amount of research on the Creative Zen 6gb MP3 player, I was relati'vely comfortable with the product and decided to purchase it.
However, after browsing this forum for a few hours, I see quite a few things that trouble me about Creative in general:
"Real person" my (CENSORED) -horrible customer support
Creative Expects 3rd Quarter Loss, Sells HQ Building?
Message to Daniel_K -lack of product support/customer relations
and a countless number of other posts about hardware and software issues with the Zen
I really like the features built into the MP3 player (FM transmitter, voice recorder, Equalizer) and do not want to sell my soul to Ipod.
That being said, I wanted to see if there was anyone on this forum that actually liked their Zen and did not have issues with it.
I would greatly appreciate your positi've feedback as I hope that I will not have to spend countless more hours searching for and then researching a different MP3 player that fits my needs.
In addition, I was curious about the user interface on the Zen. I know that it uses ID3 tagging and that a folder directory cannot be used to view mp3s on the player (unless this has been added in a firmware update?, however I checked the site and did not see anything about this addition). How impeding is this ID3 tagging reliance if about 00 to 500 of my mp3s have incorrect tagging? as in, will I go crazy trying to retag everything because all I see if "Unknown" for all the data?
Yeah, that's about it for my long winded post...
Thanks,
Joe?

Just return from Mexico and found my Zen 4 GB player missing from a light finger baggage handler. I would not even consider, in a thousand years, of purchasing from the "fruit company" their overprice Ipod without a FM receiver. The Creative Zen rocks. Need I say more.

ThinkPad X131e - please share your experiences

Hello,
I am located in Germany and I tried to order ThinkPad X131e from the Lenovo Shop, but believe it or not: the online store cannot process the order. For Lenovo this should be a cause for embarrassment.
I think that ThinkPad X131e is just the kind of machine I have been looking for. But I have had a hard time finding a
single review of ThinkPad X131e online.
I was therefore wondering if those who have purchased this item could share their impressions and experiences.
Regards,
Novalis

It looks like it's unchanged from the X130e aside from the internals, which are barely an upgrade.
Either way, my x130e is built like a tank and performs on par for a netbook.
You can literally throw it at a brick wall and barely harm it.
The touchpad is pretty horrible though.

Problem with Apple Universal Dock and Iphone 3G

Just bought the newest version of the Apple universal dock (revision C), so I can have one dock for my iphone and all my ipods.
It appears that even the newest version isn't 100% compatible with the iphone.
When the iphone is connected via the dock, you get no alert sounds such as for new email, text, etc..when the phone rings you DO get audio then.
Also, when you try and sync the iphone with itunes while connected, it won't sync. It just hangs and says "sync cannot be completed"....
Connecting the iphone directly via the cable to the computer solves all these issues.
They advertise this as compatible with iphone but obviously not so...

Update:
I've checked this:
-Aux (Dock-Connector) of the iPod has no damage, no problems playing music in the car!
-Same Problem now with iPhone. It gets charged and so, but if I want to listen to music it is very quiet, music is playing for half a second or so, after that stopped, than goes on playing for a second or so. Cracking sounds often while music is stopped.
So the Dock is broken, I guess.
Any possibility to restart/resert or so by my own or try to get it fixed by apple?
Greetz!

HT201210 Hi i get an -1 restore error with the latest Os for iPhone restore

I am tring to restor an 3gs Iphone with the latest OS and all i keep getting is:
the Iphone "Iphone" could not be restored. A unknown error occured (-1).
The Iphine has NOT had Jailbreak so its not that. Any help would be great.
Cheers

Error -1 indicates a hardware failure. You'll need to bring your phone into Apple for evaluation.

Please share your experience with the universal dock for iphone 3g

Similar Messages

Maybe you are looking for