Please share your IPv6 information needs.

Are you implementing IPv6 in your network? Please share any of your IPv6 information needs here. Also share any comments you have on the IPv6 Knowledge Base Portal.

Hi John
If it's like previous years, you can register for as many sessions as you want, providing there are no clashes as you can't register for sessions that conflict or overlap with previosly booked sessions. It's always worth booking for those sessions that are of interest as some often fill and if you're not registered, you're forced to wait in a standby queue and might miss out entirely.
I only know as much as you do now regarding when the schedule builder will finally be available in that it's due sometime in July (which doesn't have too many days remaining).
Now my sessions will obviously fill quickly so make sure you book early or you might miss out ;)
Cheers
Richard Foote
http://richardfoote.wordpress.com/

Similar Messages

I erase my mac book pro to factory setting and cannot re-install the software. I received a message saying my Apple ID has not yet used with the App store. Please review your account information. Could anyone help please. I need to re-install my os.

I erase my mac book pro to factory setting and cannot re-install the software. I received a message saying my Apple ID has not yet used with the App store. Please review your account information. Could anyone help please. I need to re-install my os.

Use Internet Recovery. You shouldn't need an AppleID. http://support.apple.com/kb/ht4718
Internet Recovery will install the OS that shipped with the Mac. You can then upgrade to Mavericks if that was not it.
Do you have an App Store account? Did you ever use it to install the OS?

Can you please share your experience in implementing / upgrading the Primavera EPPM R8.3?

Hi,
In our company various versions (V7, R8.1 and R8.3) of Primavera being used in various locations. To bring all the location to a common platform, management has decided to implement / upgrade Primavera EPPM P6 R8.3 and also planned to integrate Primavera P6 R8.3 EPPM with Oracle (EBS) Projects application . Hence, If any of you implemented Primavera P6 EPPM R8.3 or upgraded the earlier versions to Primavera P6 R8.3. Please share your ideas and also the pros and cons of implementing R 8.3 EPPM. For your information we are going to have SQL database since all the existing databases are in SQL.
Please share your ideas and experiences.

Hi,
we have done a lot of implementations and migrations to the P6 EPPM R8.3 from different former versions and this is working fine. the dbsetup does a good job.
A good way in my point of view is to set up a new P6 EPPM R8.3 system with a new PMDB Instance which will keep the configurations so that you easily can migrate or exchange the instances. Always remind to have a validated backup of any instance before migrating.
Before migration you should mind the following points:
The source version of the old P6 PMDB instance is:
P6.2.1 or before => first you need to migrate it to P6 V7.0 before you can migrate it to P6 R8.3
P6 V7.0 => check if you have used P6 WebAccess: if not okay, else check if you used jackrabbit (look for migration tool), Workflows (close all before migrating); Check if using Jobservice XER-Export (no longer available); Jobservice Batchreport (only Workaround available see Knowledgebase); Risks in the P6 Client (need to be manually migrated)
P6 R8.0 to R8.2 => Using Extended Schema, Enterprise Reporting Database, own BI Publisher Reports => Check stept to be taken for migration
Other questions are:
Which authentication method will you use (native, LDAP, SSO)? If not using native and you want to connect the BI Publisher then you need also to use that authentication there.
The migration itself is pretty easy if you take care that all sessions are closed (no users or unclosed primavera sessions settings on that instance, stop all Applications, interfaces or Services connected to the instance. Cleanup your refrdel_deletes, logical_deletes and (if used before), extended Schema tables.
Then you can migrate with dbsetup, use additional Service Packs and Fixpacks (actually Service Pack 1) on the instances and then you can connect them into the environment by adding it to the P6 Configuration.
I mentioned you don't want to put all data into one final PMDB-Instance.
Regards,
Daniel

Apple id has not been used with the itunes store-please review your account information

Hello,
Good Day.
I bought apple ipad 2 and need help.
I registered online and after this i am getting the error.
apple id has not been used with the itunes store-please review your account information
Can any one help me in this issue.
Thanks&Regards,
Shankar.M

This is information you you have created an apple id.
To use this apple id for the itunes store, you have to agree to the terms and conditions and enter in the requested information before you can use the store.
When you create an apple id it does not mean you gain access to all apples features, you would need to create a :-
Itunes id
Facetime id
Game centre id
imessage id
icloud id
You can use the same email address as each login. but until you agree to each terms and conditions you wont be able to access the services.
This is usually done the first time you access each service and sign in with your apple id.
As to iTunes you need a little extra as they will request to confirm details as to address, etc, with the payment information they can confirm you are actually in that country you are trying to purchase from.
Once you have added the credit card details, you can go back in a set payment method to none and remove the credit card details once you have activated the itunes on your apple id.
Basically this message you are getting is just ADDING the feature of iTunes store to your apple id, and confirms you have not got a iTunes id yet.

When I try to sign in to my account on iTunes, I get the above error message, along with "Please review your account information". When I then click on "Review"

When I try to sign in to my account on iTunes, I get the above error message, along with"Please review your account information".
When I then click on "Review", it comesup with the page "Create an Apple Account for the iTunes Store"and presents me with the Terms Of Service.
When I click "Agree", It is disabled.
Can anyone tell me why this has happened and how to resolve it?
Please, please, please help.

Count me in as having the same problem. I have been leaving messages in the iTunes for Mac forum where others in there also are having problems. I have been unable to access my account since 11/7/2007. E-mails with Apple have not worked and now I haven't heard back from them since Saturday. I have tried both on a Mac and Windows machine and keep receiving the same error message that:
This Apple ID has not yet been used with iTunes.
I last purchased music with this account on 10/30/2007. I even tried resetting my password, changing my account info, trying on a computer with iTunes 7.4, etc. I have money in that account and 150 songs and 5-6 tv shows that I cannot access. I also just purchased a new computer and cannot sync my iPod with this computer since these songs will not transfer.
Apple really needs a phone number for technical support. Having to deal with e-mails back and forth (and waiting a day for each e-mail) is not a good business practice. Hopefully they will have a phone number in the future.
Either way, count me in on getting annoyed that a week later, this issue has not been fixed.

Error when Submitting book - Please review your billing information

I get the following error message when I submit a book for printing:
Your account information has changed.
Please review your billing information and approve it.
I went here to review my order status but I did not have any orders:
https://mercury.apple.com/WebObjects/OrderStatus
I reviewed my billing information on the web located here:
https://myinfo.apple.com
And it is correct
Any thoughts?

I got the following information from apple - following this fixed my problem:
1. Visit http://myinfo.apple.com and choose your country and preferred language from the pop-up menus. Then log in using your Apple ID and password.
2. Click Address Book on the left. If you see any blank addresses under Shipping Addresses, make the visible address your default, and then delete the blank address.
3. Click Phone Numbers on the left, delete all phone numbers, and save your changes. When you successfully place an iPhoto order, your phone number will be copied from iPhoto to My Info.
4. Check Apple ID, Email, Subscriptions, and Contact Prefs and make any necessary corrections. Save your changes.
5. Now open iPhoto.
6. Select a photo and choose Order Prints from the Share menu.
7. Click Account Info and sign in using your Apple ID and password. If you are unable to log in, try changing your password in My Info using the directions in step 1 above. Then return to step 6 and try again.
8. Click Edit Shipping and choose Add New Address from the Address pop-up menu.
9. Add the desired address into the fields, making sure to create a new label, such as "Home." Then select "Make this my default address" and click OK.
10. Now delete any other addresses listed by selecting them and clicking the Delete This Address button. You should now have only your default "Home" shipping address left.
You should now be able to submit your iPhoto order successfully. If the difficulty persists, please reply to give me the exact error message you see. I will do my best to help you resolve the issue. Thank you for your patience.

Please share your experiance on Oracle Developer

Hi,
I need to decide a suitable architecture for my new product for
3-tier implementation.
I would like to know anyone adopted developer 6.0 and having any
project/product on 3-tier application, what are all the problems
faced or likely to face in this approach?. Will be there any
performance problems?. Is there any reference site in India?
Please share your experiences.
Thanks
-Sri
null

When I started reading your list, my gut feeling was, why Chieftec? But probably budgetary considerations were the main reason. For the PSU I would prefer a Corsair AX series or Seasonic gold label one.
I would have a look at the GTX 660 Ti with 4 GB VRAM. The extra memory would help with AE and 4D and in PR can prevent the rather ungraceful reverting to software mode if VRAM is depleted. Of course this depends on image size, but if the extra cost fits in your budget, it may be worth it.
If it fits in the chassis, I would look at a CPU cooler like the Noctua NH-D14 because of the bigger diameter fans. So, better cooling and less noise.

I created an apple id online and not on itunes, my email said the apple id was successfully created but when i used it in itunes it said "This apple idhas not been used in itunes please review your account information "

I created an apple id online and not on itunes, my email said the apple id was successfully created but when i used it in itunes it said "This apple idhas not been used in itunes please review your account information "

Hi rixa03!
I have a couple of troubleshooting steps for you to try to resolve this issue. First, you should try closing the app according to the instructions found on this website, which is a troubleshooting assistant for the iPad:
Apple - Support - iPad - iPad Troubleshooting Assistant
http://www.apple.com/support/ipad/assistant/ipad/#section_3
If the issue persists, you may need to try resetting the iPad, the instructions for which can be found here:
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
http://support.apple.com/kb/ht1430
Thanks for using the Apple Support Communities. Have a good one!
-Braden

Book Error: "Please review your billing information and approve it."

Hi, I'm trying to purchase a book I created. It's 34 pages, with as many RAW images. The whole process seems to go fine until the end, when it spits out a dialog saying my account settings have changed, "Please review your billing information and approve it."
I have erased and reset my account with different credit cards with no change. This is incredibly frustrating, and this is intended as a Christmas present, so I really need to resolve this. I've spent several hours on it already and need some help here in resolving it.

Success! I figured it out and just got it to go through! The fix was to set my billing preference to "express." It was set to standard, and I kept manually changing it to express in the order to get here faster. Apple might want to make a note of this so their customers don't get frustrated when they try to spend lots of money with Apple. Also, phone support for people struggling and pleading to spend money probably makes good business sense in this economy.

J2ME Interview Questions-Please share your ideas.It's Useful for everyone.

Hi friends,
Recently, I attended J2ME interview. I could answer the basic questions but for few questions, I was doubtful. I�ve listed the few tough questions. Please share your ideas for
these questions. Hope it will be useful for everyone.
Questions:
Which mobile operating system did you use?
What do you mean by porting of applications?
If a MIDP application runs in an emulator then, is there guarantee that
It will work fine in device also? If no, then what issues are to be taken care?
What are the design issues to be taken care while developing Games
Which should be portable across all the vendor phones?
I�ve 1 MB png file in server but mobile supports 512 KB only So, how can
You download/access the image?
The mobile device has only 512 KB heap memory. An application needs 1 MB heap memory. How to make this application run without any problem?
If there are 3 applications each of 512 KB heap memory then, how memory management is done?
How to load the Image from Servlet to MIDlet?
When Garbage Collection is invoked, is there any guarantee that memory
Will be released?
5 forms are present and 1 Image is there. I need to access the same image
Over the 5 forms efficiently without creating the image using createImage, How?
Wht is use of Tilde layer?
Difference between Canvas & GameCanvas?
When do you need to use more than one thread in J2ME?
Is Threading internally implemented in the same way in Java & J2ME or is
There any difference?
Default value of Boolean variable in destroyApp() when it is invoked?
Difference between notifyDestroyed() and destroyApp()?
What are the ways to port applications to mobile?
How to find Button Clicks in J2ME similar to EventListeners in AWT?
Thanks,
Ravi.

Hi,
1) With 11g recently becoming available, should we upgrade to 11g or upgrade to 10g ?You should upgrade to 10g, and apply the latest 10g patches.
2) There is a white paper on Metaline (313418.1) that discusses using 10g with EBS. Is there anything similar for 11g ?11g is not available with the EBS. It has a different architecture and is not supported with EBS.
3) Can anyone share with me how long the actual upgrade process takes (please specify if your timings are 10g or 11g) ? To upgrade you need to do a new install of Discoverer 10g and upgrade the EUL. Make sure you have a good backup of the EUL before starting. The Discoverer install is straightforward and the EUL upgrade only takes a minute. BUT although all the workbooks are upgraded they are changed in ways that you might not have expected. Parameters become optional, occasionally worksheets disappear, titles get corrupted, the SQL generated can different, may perform more slowly and may occasionally return different results. It is sorting out these issues and regression testing the workbooks that take the time.
Rod West

I cannot sign in. "This Apple ID has not yet been used with the iTunes Store. Please review your account information." I click "Review", next message "You must turn on cookies to continue.   Cookies must be enabled if you want to create or edit.. etc."

I applied and received an upgrade code to Redeem Mountain Lion for my new MBP.
I get this message when I try to Sign in to the App Store after entering the redemption content code, and also if I just try to "Sign In".   The first part of the error is true - I haven't used the AppleID with the iTunes store.
I received the upgrade code using this same AppleID, so I don't think I can use a different AppleID.
I also tried to re-create this appleID...(it was one suggestion I saw for this issue) It doesn't let me since the ID already exists...
The error is:
"This Apple ID has not yet been used with the iTunes Store. Please review your account information." I click "Review", next message "You must turn on cookies to continue.   Cookies must be enabled if you want to create or edit.. etc."
It's clearly not a cookie issue..   Stuck...

The first part of the error is true - I haven't used the AppleID with the iTunes store.
Try here > Using an existing Apple ID with the iTunes Store and Mac App Store
received the upgrade code using this same AppleID, so I don't think I can use a different AppleID.
Correct.
It's clearly not a cookie issue..
As for cookies. Quit the App Store. Now open the Finder. From the Finder menu bar click Go > Go to Folder.
Type this exactly as you see it here:   ~/Library/Cookies
Click Go the move the   com.apple.appstore.plist   file from the Cookies folder to the Trash.
Relaunch the App Store.

I have an Apple ID and trying to sign in for the 1st time on iTunes. When I do, I get the message: "This Apple ID has not been used with the iTunes Store. Please review your account information." When I do, I get stuck in the same loop and can't sign in!

I have an Apple ID and trying to sign in for the 1st time on iTunes. When I do, I get the message: "This Apple ID has not been used with the iTunes Store. Please review your account information." When I do, it brings me to the same AppleID login window, and I get stuck in the same loop. I never get to the following screen to enter my account info. What's going on?? This is MADDENING!

If you want to use it, click Review and check your account information. Or you could contact the store support staff if you are concerned at http://www.apple.com/emea/support/itunes/contact.html for further help.

TS1424 my Apple id is not working on itunes store....itunes reply (please review your account information.....) And Demanding Credit Card Information.....But I dnt Have Any Credit Card......

my Apple id is not working on itunes store....itunes reply (please review your account information.....) And Demanding Credit Card Information.....But I dnt Have Any Credit Card......

For the CC type, select None and verify your name and address.

Upgrade R11.5.10 to R12.1.3-- please share your experience

Please help me to note the most important steps while upgrading Oracle financials from 11i to R12.
Assuming client has GL, AP, HR, Payroll, ipayments ( R11.5.10 to R12.1.3)
Please share your experiences. It will be a greta learning experience for us.
Thanks in advance

user13648035 wrote:
Please help me to note the most important steps while upgrading Oracle financials from 11i to R12.
Assuming client has GL, AP, HR, Payroll, ipayments ( R11.5.10 to R12.1.3)
Please share your experiences. It will be a greta learning experience for us.
Thanks in advancePlease see old threads for similar discussion -- https://forums.oracle.com/forums/search.jspa?threadID=&q=Upgrade+11+to+R12&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
Thanks,
Hussein

Table controlled partitioning - please share your experiences.

hello ,
is anyone using table controlled partitioning in the sap on db2 for z/os enviroment?
can you please share your [good/bad]experiences on the subject ?
is there anything we should all watchout for ?
thanks
omer brandis
visit the sap on db2 for z/os blog
http://blogs.ittoolbox.com/sap/db2/

hello ,
is anyone using table controlled partitioning in the sap on db2 for z/os enviroment?
can you please share your [good/bad]experiences on the subject ?
is there anything we should all watchout for ?
thanks
omer brandis
visit the sap on db2 for z/os blog
http://blogs.ittoolbox.com/sap/db2/

Please share your IPv6 information needs.

Similar Messages

Maybe you are looking for