Please SOLUTION!!!!!! License Problem: BT-6967, XP SP2 BlueSoleil BT Driver

Please SOLUTION!!!!!! License Problem: BT-6967, XP SP2 BlueSoleil BT Driver
Im so bored with this problem.. i need solution.. please!! MSI how is posible BlueSoleil can't work only Demo version if I downloaded by his page
any idea?

Quote from: jamesaddicted on 07-February-06, 19:51:23
where did??
HUH?

Similar Messages

Hello guys please solution this problem

i recently got a IBM thinkpad with Windows 7 Professional 64 bit.
we have a HP Laserjet 1020 installed and shared on my IBM thinkpad laptop which is working windows 7 profesional 64bit computer. i am having trouble installing it on my laptop which working on windows 7 professional 32 bit. if i connect the printer to my IBM thinkpad (win 7 64bit) via USB, windows finds the drivers and it works.(under domain all network)
The problem is when ever i try and insatll it over the network it does not work. i can search and find which computer it is attached to and see it in the shared printer list, but when i ever i try to connect to it says connecting>>searching windows update>>cant find drivers. it gives me the option of searching for the drivers to install.

Hi,
On the host 64-bit PC open Control Panel > Devices and Printers.
Right click the 1020 icon and select Printer Properties.
Open the Sharing tab and click Additional Drivers.
Check the box next to X86 and then click OK.
Now try connecting to the printer from the 32-bit client and check for any difference.
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

PLEASE, PLEASE HELP: Big problems with my Zen Touch. (Firmware/driver issu

So here's the deal:
Last night I thought I'd finally take the time to upgrade my Zen Touch to 2. from .3 or something like that. I noticed that there was a warning saying that this was no small upgrade, and that I should back up everything I have on it.
I'm glad I did, because now my MP3 player situation is seriously screwed up, big time. During the upgrade process, my computer froze, leaving my Zen Touch without firmware (ok, so firmware version 0.0.0). Upon turning the device on, it boots up in recovery mode. This allows me to either format, clean up, or "reupload" firmware. I've tried all of these options, but the fact is clear that my computer simply will no longer recognize my MP3 player.
It does, however, recognize it at as a generic storage device. However, this isn't enough for me to reinstall the player's firmware unfortunately.
So basically, I can't update driver or firmware right now, because my computer won't acknowlege my Zen Touch!
Somebody please, please help.
I've already tried using the setup file from http://www.jumpingcholla.com/jce_nomad_ZEN.htm.
Seriously, please help!

Sort of success!
I now finally have firmware 2. installed on my Zen Touch! Yeah! I'm not entirely sure how I did it, and I'm not bothering to find out, I'm just glad I finally got it on there.
But some problems still remain. After all this fiddling with my driver and firmware and whatnot, my computer just doesn't see my MP3 the same way as it used to. Before, it was great, all I had to do was plug her in and I could bring up Zen Explorer in Windows Explorer, or organize my stuff in Creative MediaSource.
Now that's not the case. The only way I can sort of add stuff to my player now is by going into Windows Explorer, which is still more or less acknowleging my player as a "portable device". Granted, there is a dri've called "My Zen", but it doesn't bring up Zen Explorer like it used to when I click on it. Furthermore, when I go into MediaSource, I can't select it as a location, there just isn't anything there.
It almost seems as if my computer thinks I'm just using a portable hard dri've. Is there anyway I can tell it that it's an MP3 player, too?
Thanks!

New hard drive and photoshop license problem

I have a Dell Inspiron 6000 with a 1.5 Ghz Pentium processor, 2 GB of RAM, and Win Xp/Pro SP3.
The hard drive in this computer failed, and it has been replaced. I used an image backup from Acronis True Image 10 to "restore" the new disk.
Now, when I try to open Phostoshop CS2, I receive a message that the license is no longer valid (I have been using this version of Photoshop for a long time).
I don't have this problem with InDesign CS3 (v. 5.0.2), FrameMaker 7.2b144, or Acrobat 8.1.6.
I didn't find any helpful info on the "Product Activation" web page.
I tried a forum search and a search of Adobe.com using the search criteria "new hard drive and photoshop license problem."
The only relevant item I could find is this:
"Backup and restoration of your system using standard tools do not require reactivation. While reactivation after backing up or restoring the system was required in early versions of Adobe software (such as Adobe Photoshop® CS), Adobe has continued to improve the activation process with new technology that eliminates the need to reactivate after system restoration. In complex situations where the system is being upgraded, we recommend deactivating the Adobe software before commencing the system upgrade. Once the system upgrade is completed, the subsequent install/restore will require reactivation, which is typically accomplished without difficulty and is completely transparent to the user."
So does that mean I have to "reactivate" Photoshop CS2? If so, do I use the Activation window that is displayed when I open Photoshop? The serial number has 20 characters. Will the Adobe (re)activation recognize this old serial number? If not, what do I have to do to get this product usable again?
Please help.

>replaced your hard drive and CS2 DRM is looking for the old hard drive number and not finding it
Interesting... I use http://www.terabyteunlimited.com/image-for-linux.htm which creates a bootable CD and runs outside of Windoze
I have made image files and loaded those files to a new hard drive (I use drive swap hardware to make a backup and create a new drive every time I install or uninstall major software) and have never had any program complain about needing activation
But, since the program I use is Linux on a bootable CD, it copies EVERYTHING on a hard drive, even the hidden registration areas as far as I can tell, so when I do a restore to a new drive, everything is put on the new drive

License Problem .. what do I need ...

Dear all !
I have some license problems .. and want kindly ask for
advise ..
I had time fixed license which works fine ..
and then I got an update for the license ..
and merged the old and the new license with
the updateLicensefile.sh script ..
But when I start a container with > startWebLogic.sh
I got WebLogic: license has expired on Thu Sep 13 12:00:00 CEST 2001!
. and he seems not recognize the new license ..
So I tried to check which parts are missing ..
Expried is Connector, QASuite .. do I need them ?
For WebLogic, "SSL/Export, 2PC, In-memory Replication - Servlet,
In-memory Replication - EJB. EJB 1.1, EJB 2.0, JMS, Cluster,
Clustered JMS, jDrivers ..I have new licenses .. but
they are in a new license-group .. not
longer in release="6.1"
<license-group format="1.0" product="WebLogic Server" release="*">
So I'm really confused, what to do .. and
what is the missing license ?
My customer number is : DEU100683
Can anybody be so kind to help me out of this ?
The other question is, does BEA also provide normal
access to the newsgroups via nntp .. I would
prefer this .. which one is the nntp server ?
Thanks a lot !
Frank

Frank,
The java weblogic.Admin LICENSES utility lists the license that the server
is using.
If you had multiple licenses and did not know which one was being picked
this utility will help you.
http://e-docs.bea.com/wls/docs61//////adminguide/cli.html#1134397
Regarding the documentation error can you paste the url where you found the
error. I will make sure I inform the person responsible for that.
Regarding the information returned by the license utility I will follow up
with Engineering to check if it would be possible to change the format
returned.
Thanks
Raj Alagumalai
Frank Grützmacher <[email protected]> wrote in
news:[email protected]:
>
>
Raj Alagumalai wrote:
Frank ,
Regarding the UpdateLicense-script issue, the order in which the new
license is appended should not matter. As long as the server is able
to read the information from that file.
Please refer to this url for more information on the showLicenses
utility. This utility will provide information on what license the
server is using.
http://e-docs.bea.com/wls/docs61/////adminguide/utils.html#1117307
Hope this information helpsDear Raj !
Thanks a lot at first ..
but :
java utils.showLicenses .. doesn't really help , because
on the workstation it brings me : java.lang.NullPointerException ..
without
any further information and without stack trace ( this should be added
of course )
I also used .. weblogic.Admin which works to show the licens
information ..
but t seems only to list the contents of the license.bea in another way
not whether any of the liences makes sense and is valid ..
Then I also tried :
java utils.writeLicense ..
not very helpful too in this case .. also list only
the contents .. something like : you have a valid license
until xxx .. of this yyy components would help
more ..
BTW .. the documentation is wrong .. the Property is : bea.home ..
not bea.system.home .. and the example on a unix console with
-Dbea.home=d:\bea60 shows two things
a) this was not updated for 6.1 ..
b) you differ not , whether you are on unix or dos .. but you should
But this is all not important .. shows only that also BEA if far away
from being perfect,
this is from a developer point of view good .. because everyone is
failing somehow
every day .. but the license problem should not occure !
I sent the problem on Thuesday to the support , to see what can be done
so far no answer !
Thanks again for your kind help and hints !
Frank

2012 Licensing Problem

I would like to make everyone aware of an issue with RDS and the FIX from Microsoft services which I consider unacceptable.
The setup is as follows. One 2012 DC with Terminal server licensing installed. Two 2012 servers with RDS enabled. Take note that RDS was NOT deployed using the wizard as there is no need
for all of the resources of a server farm for 2 servers. On each of the RDS enabled servers, group policey was used to enable and specify the RDS server and licensing mode. The RD Licensing Diagnoser was used to verify, and report that no licensing
problems for the Remote Desktop Session Host Server existed, and the tray icon that reports that you are running a trial version of RDS does NOT appear.
Advance forward a few months and users start reporting that they cannot login and that they are receiving “The remote session was disconnected because there are no RDS license servers available
to provide a license."
After doing all that I could I filed a case with Microsoft Support at the Highest Level Possible. After a month I finally was able to talk to someone. After 2 more weeks, here is the solution
they gave me….
Open the registry, Navigate to HKLM\System\CurrentControlSet\Control\TerminalServer\RCM
Delete the GracePeriod Key
Reboot
This continues to occur every few months. I wish someone at MS would FIX the problem.
Lee

sure.
i have 5x 2012 RDS farms, nearly identical in configuration dispersed throughout the globe, each farm has:
2x RDSH
1x RDCB, RDWeb, RDLicense server with 2012 CALs deployed as User Mode
We are pointing directly to the license server in our collection settings (only 1 collection per farm) and also again via GPO settings to override license server auto discovery options
These systems were rolled out using scenario-based installs so while RDWeb is there, it's not actually being used (nothing published to it), users are leveraging session-based desktops via RDP client both internally and externally
systems are all domain joined, we're still on 2003 functional level in AD
i first encountered this issue around the 120 days mark after the first farm went into production, we saw that users could not login and event ID 1130 was being thrown for every login attempt.
i saw this article and followed the steps to resolve it:
http://www.360ict.nl/blog/no-remote-desktop-licence-server-availible-on-rd-session-host-server-2012/
however, after another 120 days passed, i ran into the same issue again, realizing this was not a permanent fix. after just opening the case with MS on this a couple of weeks ago, they've told me it's a bug and so for now, i proactively purge the
L$RTMTIMEBOMB_nnnn key under HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Terminal Server\RCM\GracePeriod, i restart
TermService so i don't have to reboot the whole box and it's fine for another 120 days
during the issue and even when it's not occurring, licensing diagnostics come up clean, i haven't taken a report while the issue is occurring but when it's not occurring the reports show CALs being assigned to all users by the license server.
basically, it seems like even though we have a license server that is activated with user CALs, the Review section shows green checks under both sections, and reporting is fine - the system is stuck in 120 day trial mode for some reason.
now MS did say they know about this and they're working on a fix, hopefully not to just get me off the phone, but they didn't have a different workaround and advised that i continue doing what i'm doing.
what i don't really understand is that when i remove the L$RTMTIMEBOMB_nnnn
key from the registry, it gets recreated upon the first user logon that has to go talk to the license server. in a working 2012 environment, should this key even exist if an active license server is already available?

As soon as I try to open PDF a "licensing problem" screen appears...

I have reinstalled reader software but get the same message.

Hey -
Thanks for taking the trouble to respond - appreciated. I did post the details you requested and sent you IM about that. Anyway, the problem
appears to have fixed itself as soon as I opened Acrobat9 Pro it
reconfigured itself and everything is working again!
_Den
Date: Mon, 5 Dec 2011 20:22:47 -0700
From: [email protected]
To: [email protected]
Subject: As soon as I try to open PDF a "licensing problem" screen appears...
    Re: As soon as I try to open PDF a "licensing problem" screen appears...
    created by ʇɐb ɹəuəllıʍ in Adobe Reader - View the full discussion
What is your operating system? Can you post a screenshot of that screen?
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4065853#4065853
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4065853#4065853. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Adobe Reader by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Solutions for problems with QuickTime files in After Effects CC (12.0)

We have a new blog post up about solutions for problems with QuickTime files in After Effects CC (12.0) because of conflict with DVCPROHDVideoOut QuickTime components.
Please read that post and let us know here on this forum thread if you have any questions or comments.
Also, please let us know if the proposed solution works for you.

Mark - The new document that we published is meant to address a specific issue. You can confirm you have the issue by the following:
Adobe QT32 Server is not running when you receive these errors. Keep Activity Monitor open to track whether or not it is running.
The crash log for QT32 Server indicate CoreAudio as the last component called. You can find the crash logs in Users/username/Library/Logs/DiagnosticReports. The report will look like this:
Thread 0 Crashed:: Dispatch queue: com.apple.main-thread
0   ???                                     0x04981f90 0 + 77078416
1   com.apple.audio.CoreAudio               0x949d05c1 __Call_block_invoke_03 + 56
2   libdispatch.dylib                       0x94a90f8f _dispatch_call_block_and_release + 15
If this is not the issue you're having, please start a new thread and provide the usual data. If your problem does match this issue, please double-check that you've followed the steps in the new document and post back here.

When i try and open the auto cad Lt that i just downloaded i get this error The directory may be locked by another process or have been set Read Only. Directory: '/Users/hockaday' Please correct this problem and press OK to exit the application.

i get this error why i try and open the auto cad that i just downloaded
The directory may be locked by another process or have been set Read Only.
Directory: '/Users/hockaday'
Please correct this problem and press OK to exit the application.

I did install it in the admin account. Actually the computer has four accounts, one for my husband, where I installed it. One for me which also is set to admin, one is called TEST and has nothing in it and one is guest user.
I don't know how AutoCad is interfacing with the account. That is why I am not sure what to do about it. I read other threads in various places and some seemed to point to something having to do with having multiple users. The solutions were not clear. I was hoping someone else had this problem and could tell me what to do. I tried apple support but no help. I have not tried AutoCad yet as I assumed they wont help since this is a free educational version of their product.

JCom License Problems on WLS 7.0

I've read through the various threads posted here on people hitting licensing problems
with JCom. Unfortunately, I seem to be having the same problem however the workarounds
suggested by others don't seem to be solving my problems.
I'm trying to get a bare bones example of a Java2Com application running. I'm
using WebLogic 7.0 SP1 on Win2k. Whenever I run my example, I get the following
error:
J-Integra 1.5.0 SB004 Copyright (C) 1999-2001 Intrinsyc Software Inc. http://www.intrinsyc.com/j-integra/
java.lang.RuntimeException: No valid licensing information found.
java.lang.ExceptionInInitializerError: java.lang.RuntimeException: No valid licensing
information found.
Can someone please give me a step-by-step breakdown as to what I'm supposed to
do to get JCom working?
Thanks,
Brian.

I've read through the various threads posted here on people hitting licensing problems
with JCom. Unfortunately, I seem to be having the same problem however the workarounds
suggested by others don't seem to be solving my problems.
I'm trying to get a bare bones example of a Java2Com application running. I'm
using WebLogic 7.0 SP1 on Win2k. Whenever I run my example, I get the following
error:
J-Integra 1.5.0 SB004 Copyright (C) 1999-2001 Intrinsyc Software Inc. http://www.intrinsyc.com/j-integra/
java.lang.RuntimeException: No valid licensing information found.
java.lang.ExceptionInInitializerError: java.lang.RuntimeException: No valid licensing
information found.
Can someone please give me a step-by-step breakdown as to what I'm supposed to
do to get JCom working?
Thanks,
Brian.

License Problems

Please help I dont know how to fix it!!!!

Reader is a free program that doesn't require licensing... Please explain your problem in detail.

BlackBerry Z30 - Country selection of BlackBerry Solution License Agreement

Hy everybody!
I just changed my BlackBerry Bold 9700 with the new BlackBerry Z30 and during the start up procedures, from error, I have selected another country than mine for BlackBerry Solution License Agreement.
Do you have any idea on how can I select the correct country and replace the one selected by mistake? The phone is configured so that I could`t find any link in performing such change.
Thank you!

Hi and Welcome to the Community!
There is no setting to change...it is set at the initial configuration. The only way to re-select it is to re-do the initial configuration...and the only way to do that is to WIPE the device and start all over.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Week 6: No satisfactory resolution on licensing problem

In early November, presumably after the cyberattacks that targeted Adobe earlier this Fall, we received a notice indicating a problem processing the monthly payment for my Creative Cloud license. We provided new corporate credit card info for billing, but it never successfully renewed our license. Last week, we discovered that the license had expired, locking me out of my Creative Cloud products. Despite notifications from Adobe Support that the problem had been resolved, I am still unable to reliably access the Creative Cloud software.
I've tried logging out of the Creative Cloud client, then logging back in a few times. That allowed me to open either InDesign, Acrobat, or Photoshop once. Thereafter, and for all other products, I continue get the following sequence of messages: (1) Renew your subscription. If you've already renewed, press "try again"; (2) Thank you, your subscription is now active - press "continue" use your product, (3) Renew your subscriptio. If you've already renewed, press "try again" . . ." and so on, ad infinitum. Occasionally, I will get an "Adobe Software License Agreement" splash screen that temporarily lets me access the software, but stops working again once I exit the program and try to relaunch.
I'm so confused. Can someone please assist? I just can't afford to lose yet ANOTHER week of work because of licensing problems.

In early November, presumably after the cyberattacks that targeted Adobe earlier this Fall, we received a notice indicating a problem processing the monthly payment for my Creative Cloud license. We provided new corporate credit card info for billing, but it never successfully renewed our license. Last week, we discovered that the license had expired, locking me out of my Creative Cloud products. Despite notifications from Adobe Support that the problem had been resolved, I am still unable to reliably access the Creative Cloud software.
I've tried logging out of the Creative Cloud client, then logging back in a few times. That allowed me to open either InDesign, Acrobat, or Photoshop once. Thereafter, and for all other products, I continue get the following sequence of messages: (1) Renew your subscription. If you've already renewed, press "try again"; (2) Thank you, your subscription is now active - press "continue" use your product, (3) Renew your subscriptio. If you've already renewed, press "try again" . . ." and so on, ad infinitum. Occasionally, I will get an "Adobe Software License Agreement" splash screen that temporarily lets me access the software, but stops working again once I exit the program and try to relaunch.
I'm so confused. Can someone please assist? I just can't afford to lose yet ANOTHER week of work because of licensing problems.

Why iMessages, facetime, app store, etc I do not work in maverick? please solution thanks

why iMessages, facetime, app store, etc I do not work in maverick? please solution thanks

Philip, many people have talked about this "blue lego" problem, but you are the first to explain it (migrating to Intel) that brings clarity to the issue. The Business and People widgets use small "webkit" plugins in order to do their work. However, the plugins on the PowerPC versions of these widgets are NOT Universal, and thus will not run on an Intel Mac.
Typically, this should never be an issue because an Intel Mac comes with widgets already installed (the Universal versions of these widgets, which include Universal versions of these plugins).
However, if I understand you correctly, you "migrated" your old files from your PowerPC Mac to your new Intel Mac. Is it possible you overwrote your Intel OS X default widgets (the 18 widgets in [Hard Drive]/Library/Widgets) with the versions from your old PowerPC Mac during this migration?
If so, then that is the source of your problem: you replaced your Universal widgets with PowerPC widgets. The solution is to reinstall your widgets from the Installer that came with your new Intel Mac. You can either re-install OS X entirely, or use Pacifist to just install those overwritten widgets.

HELP. ............Hi folks hope some one can help me please.Having a problem in Bridge I open my images in ACR, as I open files in a folder and lets say they are labeled in yellow they are all going back to the camera raw default , in other words no ma

HELP. ............Hi folks hope some one can help me please.Having a problem in Bridge I open my images in ACR, as I open files in a folder and lets say they are labeled in yellow they are all going back to the camera raw default , in other words no matter what work I have done, inc cropping they all go back to ,as they came out of camera. What on earth is happening? I am on PS CS6. I might point out everything was working normally up to yesterday, when this first started.
I recently changed computer to 64bit from 32bit, not sure if this causing the problem or not. Any help would be appreciated.

Robert,
Would you be so kind to rephrase your question with concise, precise information and without any "let's say that" hypotheticals? Sorry, I can't quite follow you.
Also please give exact versions of Photoshop CS6 (13.what.what), of Bridge and of your OS.
Thanks.
BOILERPLATE TEXT:
If you give complete and detailed information about your setup and the issue at hand, such as your platform (Mac or Win), exact versions of your OS, of Photoshop and of Bridge, machine specs, what troubleshooting steps you have taken so far, what error message(s) you receive, if having issues opening raw files also the exact camera make and model that generated them, etc., someone may be able to help you.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

Please SOLUTION!!!!!! License Problem: BT-6967, XP SP2 BlueSoleil BT Driver

Similar Messages

Maybe you are looking for