Please some one can help me to fix the special char issue

Hello,
Please some one can help me to resolve the issue.
I was try to load data from PSA to DSO,where it was got failed.
error message is saying that "Value 'Blythewood' (hex. '0042006C00790074006800650077006F006F0064') of characteristic ZSHPTOCIT contains invalid characters".
Please advise me to resolve the issue.

Hi Aryan,
Change your info-object ZSHPTOCIT to accept Lower Case Letters(it is in General tab of the Info-object definition screen. Check the Lower Case Letters Box) and then load the data. I dont know why you are using the info-object but you may want to check what "Blythewood" means to business users. If it makes sense to them then its fine or esle ask the R/3 team to correct the data.
Regards,
Nikhil

Similar Messages

Would you please some one can provide me Reporting function and Techn specs

Hi BI guru's
Would you please some one can provide me Reporting function and Techn specs.I have got new requirement for the reports.
Hence i need to prepare Functiona and technical spec for them.
I don't have any documents related to it.
Please some one can help me and mail it to [email protected]
Edited by: krish aryan on Jul 30, 2008 3:00 AM

Hi,
You need the template for techical specs? Your question is not clear. If you are asking for templates, I don't think they can be shared in a common forum like this.
We can give you an idea as to how it can be prepared, but I guess you will already have templates for your documentation in your company portal.
Regards
Sudeepti

HELP. ............Hi folks hope some one can help me please.Having a problem in Bridge I open my images in ACR, as I open files in a folder and lets say they are labeled in yellow they are all going back to the camera raw default , in other words no ma

HELP. ............Hi folks hope some one can help me please.Having a problem in Bridge I open my images in ACR, as I open files in a folder and lets say they are labeled in yellow they are all going back to the camera raw default , in other words no matter what work I have done, inc cropping they all go back to ,as they came out of camera. What on earth is happening? I am on PS CS6. I might point out everything was working normally up to yesterday, when this first started.
I recently changed computer to 64bit from 32bit, not sure if this causing the problem or not. Any help would be appreciated.

Robert,
Would you be so kind to rephrase your question with concise, precise information and without any "let's say that" hypotheticals? Sorry, I can't quite follow you.
Also please give exact versions of Photoshop CS6 (13.what.what), of Bridge and of your OS.
Thanks.
BOILERPLATE TEXT:
If you give complete and detailed information about your setup and the issue at hand, such as your platform (Mac or Win), exact versions of your OS, of Photoshop and of Bridge, machine specs, what troubleshooting steps you have taken so far, what error message(s) you receive, if having issues opening raw files also the exact camera make and model that generated them, etc., someone may be able to help you.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

Please some one can explain about some complex queries

BW Guru's,
please some one can explain about some complex queries which was created while working on Reporting.
I need to create profit and loss query as per requirment on the FL-Gl cube.
Answer would be appreciate in advance.
Regards
Krish

HI Aryan,
No need to create FM on your own. You can copy the FM from Function Group RSAX.
The procedure to create FM extractor is as follows:
1) Create an extract structure.
2) Go to SE80. Select Function Group RSAX , right click and then copy.
3) Give your own name to the function group to copy.
4) Select one appropriate FM from the list of FMs provided. eg FM RSAX_BIW_GET_DATA_SIMPLE.
5)Specify the name of new FM you want to create.
6) Go to SE37 and open the FM you have created by copying from Function Group RSAX.
7) no need to change the import tab.
8) On tables tab, for paramerter name E_T_DATA under asociate name specify the name of extract structure you hav created.
9) Under source code tab make the changes in the source code only to customise it to your requirement. eg: declare the database table you are using, make changes where datasource is in picture, etc.
I have created a generic DataSource with the help of above procedure.. I hope you will find it helpful...
Regards,
Geetanjali

Please some one can provide me FM extracter document

Hello,
I am creating new function module extracter and need some usefull documents.
Hve searched in SDN,but i couldn't able get right fields over there and one more thing is have a document and where the declaration for FM as given below
Importing Parameter
I_DSOURCE type SRSC_S_IF_SIMPLE-DSOURCE DataSource
I_INITFLAG type SRSC_S_IF_SIMPLE-INITFLAG Initialization call
I_MAXSIZE type SRSC_S_IF_SIMPLE-MAXSIZE package size
I_REQUNR type SRSC_S_IF_SIMPLE-REQUNR request number
Tables
I_T_SELECT type SRSC_S_IF_SIMPLE-T_SELECT
I_T_FIELDS type SRSC_S_IF_SIMPLE-T_SELECT
E_T_DATA
Exceptions
NO_MORE_DATA
ERROR_PASSED_TO_MESS_HANDLER
Please some one can explain me abt the declartion

HI Aryan,
No need to create FM on your own. You can copy the FM from Function Group RSAX.
The procedure to create FM extractor is as follows:
1) Create an extract structure.
2) Go to SE80. Select Function Group RSAX , right click and then copy.
3) Give your own name to the function group to copy.
4) Select one appropriate FM from the list of FMs provided. eg FM RSAX_BIW_GET_DATA_SIMPLE.
5)Specify the name of new FM you want to create.
6) Go to SE37 and open the FM you have created by copying from Function Group RSAX.
7) no need to change the import tab.
8) On tables tab, for paramerter name E_T_DATA under asociate name specify the name of extract structure you hav created.
9) Under source code tab make the changes in the source code only to customise it to your requirement. eg: declare the database table you are using, make changes where datasource is in picture, etc.
I have created a generic DataSource with the help of above procedure.. I hope you will find it helpful...
Regards,
Geetanjali

Please some one can send me CD SAP IDES

i lost my CD SAP Ides and SAP Help...please some one can send me?

Hi Aryan,
Change your info-object ZSHPTOCIT to accept Lower Case Letters(it is in General tab of the Info-object definition screen. Check the Lower Case Letters Box) and then load the data. I dont know why you are using the info-object but you may want to check what "Blythewood" means to business users. If it makes sense to them then its fine or esle ask the R/3 team to correct the data.
Regards,
Nikhil

I would like to know how i can create a bell graph with out using sub VIs, the data that i created consists in 500 readings with values of 0 to 100, i calculated the mean value and standard diviation. I hope some one can help me

I would like to know how i can create a bell graph with out using sub VIs, the data that i created consists in 500 readings with values of 0 to 100, i calculated the mean value and standard diviation. I hope some one can help me

Here's a quick example I threw together that generates a sort-of-bell-curve shaped data distribution, then performs the binning and plotting.
-Kevin P.
Message Edited by Kevin Price on 12-01-2006 02:42 PM
Attachments:
Binning example.vi ‏51 KB
Binning example.png ‏12 KB

Good day , please Any one can help me

Recently I get an iPhone witch was used from many month , the problem is that I don't know the first user so I don't know the password of the existing Appel Id and I can't delete his Apple ID because i don't know it's password , I make my Owen Apple ID and I have changed many things but the problem still in the iCloud because I can't delete the existing id so all my data may go to another person so please advise

user12039624mhmads81 wrote:
... Please any one can help me to get a good document for upgrading database from Upgrade Database From 8i & 9i& 10g to 11g which include prerequisite and upgrade process and after upgrading process waiting for your response because it necessary neededI'm wondering how the previous answer is correct since it is the 10g upgrade guide whereas you're looking for a 11g upgrade.
By the way which 11g release ?
Once you choose your release target, got to the doc http://www.oracle.com/technology/documentation/index.html click on the link corresponding to your target version, there will be an upgrade guide with all the steps you need to know.
Nicolas.

Some one can provide me documents for the Tasks in UCMON

Hi,
some one can provide me documents for the Tasks and its dependencies in UCMON
Those task are below
1>Period Initialization
2.>Load R/3 data
3>Retained Earnings
4>Currency Translation
5>Elimimination IU Rev&Exps
6>IU Sales
7>IU Pay/Rece
8>Elim COI
9>Reclass(DOM-CORP)
10>Reclass(MX-CORP)
11>Reclass(DOM-INTL)
12>Reclass(ALL-CORP)
Please provide me document on the above tasks and their dependencies in UCMON.
I would like to know what are these steps and what it do in UCMON.

Prasad,
You have to apply to guys and documents of the company from which you took this info. This is a completely custom set of tasks. You either should read about them in the company's manuals or go through the tasks and underlying methods (and simultaneously through on-line help:
http://help.sap.com/saphelp_sem60ep1/helpdata/en/62/f7e73ac6e7ec28e10000000a114084/frameset.htm).
If it doesn't help, then if I were you' I'd consider leaving this job. It might be not for you.

Please some one can provide me SP13 and SP14 SNotes

Hi,
Some one can provide me SNote for SP13 and SP14
Is there any diffrence between both SP13 and SP 14
Which i would like to go for
Please some can advise me

what do you mean by provide SNote
All support packs are different you dont have to choose between them but apply all of them. They need to applied in sequence. You cant apply 14 without applying 13.

Can some help me to fix the mail date issue please.

Hi,
I recently fresh installed snow leopard server and I successfully migrated my all mails to the new server (leopard server 10.5.8 to snow leopard server 10.6.2).
Now my problem is, for some of the accounts all my old email date header shows as they received on mail migrated date.
Please help me how do I fix it. So my server show the correct date of my old mails.
Thanks,
Gulab Pasha
+918042616308

I had an issue very similar to this not too long ago and what I ended up finding out is that there are 2 records.
The first for when the client machine received the email.
The second date for when the email was originally sent.
The original sent date was all that I cared about, so on the client workstation, I turned off the "Date Received" column and turned on the "Date Sent" column.
That fixed the problem for us ... however, I can understand why the two columns exist. Sometimes people send email that are from different times when their system clock is set incorrectly or other various reasons. With Date Received, email will always be in the order in which it was received. With Date Sent, someone could send an email from 1969 and it would end up on the bottom of your email list.
Just throwing that option out there for you.

Some one can help me with Properties()

hi, i try and i try to reasign one group of final static var, and i cant, so i see can i use the Properties() class to reasign one final static var.
import java.util.Properties;
Public class Config extends Object{
static final int EMITIDO;
static final int PAGADO;
static final int ENVIADO;
static final int SOLUCIONADO
public void Config(){
Properties defaultProps = new Properties();
try{
defaultProps.setProperty("my_new_emitido","2");
defaultProps.setProperty("my_new_pagado","3");
defaultProps.setProperty("my_new_enviado","4");
defaultProps.setProperty("my_new_solucionado","5");
EMITIDO = (new Integer(defaultProps.setProperty("my_new_emitido"))).intValue();
PAGADO = (new Integer(defaultProps.setProperty("my_new_pagado"))).intValue();
ENVIADO = (new Integer(defaultProps.setProperty("my_new_enviado"))).intValue();
SOLUCIONADO = (new Integer(defaultProps.setProperty("my_new_solucionado"))).intValue();
the compiler send me a error : cannot assign a value to final variable ABONO
some can help me please!!!

tks, yes i now but that was the only way to use them
in other class with the case statement
meabe you now other way tks.Use ifs instead of the switch.

I HATE Menubar ... some one can help???

Hello, i'm alone inside this project (
http://br24.dialhost.com.br/~areaproj)
and want to use flex... but having troubles with idiot menu.... In
my case user que can change viewstacks when he click in Item of
menu and in subitem to. For this a must make menubar show submenus
when user rollover mouse... Some one know how to do this?
Thanks.

create a menubar, link it to a xml list (for the drop downs)
then on event "rollOver" have it expand the menu.
<mx:MenuBar id="myMenuBar" useHandCursor="true"
buttonMode="true" toolTip="The Main Menu" labelField="@label"
width="322" cornerRadius="10" alpha="1" left="171" top="48"
styleName="TopMenu" themeColor="#333333" selectionColor="0x7FCEFF"
rollOverColor="0xFFFFFF" borderColor="#642200"
itemClick="mainMenu(event)">
<mx:XMLList>
<menuitem label="Products" id="products" top="48" >
<menuitem label="French Bread" data="1"/>
<menuitem label="Croissants" data="2"/>
<menuitem label="Muffins" data="3"/>
<menuitem label="Rustic Bread" data="4"/>
<menuitem label="Desserts" data="5"/>
<menuitem label="Pretzels" data="6"/>
</menuitem>
<menuitem label="Customers" >
<menuitem label="Login" data="7"/>
<menuitem label="Steps to Become Potential Customer"
data="8"/>
</menuitem>
<menuitem label="Company Resources" >
<menuitem label="History" font-color="#FFFFFF"
data="9"/>
<menuitem label="Employment" data="10"/>
<menuitem label="Employees" data="11"/>
<menuitem label="Newsletter" data="12"/>
<menuitem label="About Us" data="13"/>
</menuitem>
</mx:XMLList>
</mx:MenuBar>

HT201365 Please any one can help me ?

My mam mini IPad stop working, when I try to reset it the system ask me to unlock it with Apple ID because "" find my iPad is turned on"" and I don't know the id that ben used. What I have to do?!

The only one that can help you is the previous owner. They must remove it from their account as explained here: http://support.apple.com/kb/TS4515 or you won't be able to use it.

Some one can help me to create activity with questionnaire?

hi experts
now in E-recruiting, I want to create an questionnaire activity, but in hrp5141, the column-- "QA_TPL_OBJID"--of that activtiy is blank, I do not know the reason? is there something I have to configure?
thank you

Hello sun,
the column "QA_TPL_OBJID" contains the hrobjid of the questionaire hr object (otype VA) you maintain when you create an activity in the bsp. To be able to choose a questionaire from the search help you have to create and release one. Usually you will find the create question and create questionaire links on the administrator startpage.
Best Regards
Roman Weise

Please some one can help me to fix the special char issue

Similar Messages

Maybe you are looking for