Please somebody help- I don't understand binary files!!

I have binary files (.bin). They contain 2D arrays of data in I16 files. It does me no good to have a .bin file.
I HAVE to be able to view this data in a spreadsheet and I am getting very impatient because I have yet to figure out how to do this correctly. Everytime I've attempted to build a VI on my own, or edit the "High Speed Data Reader.VI", I don't get the numbers I need.
*What is a good way for me to get the binary file into a spreadsheet.
*Is there some other type of code/application I could link to in a VI to read and translate the .bin file?
I have Labview 6.1.
I am attaching a .bin file like what I need to convert.
THANKS!!!
Lauren
Attachments:
samplebinaryi16.bin ‏59 KB

Hi Lauren,
There are a couple of ways to proceed.
You can open and read the file. It should be a string of ASCII representation of the values stored (weird characters). To look at them, place an indicator where you read the file. On the front panel, right-click the indicator and select HEX Display.
To manipulate the data, you can type cast it into as a integer... Then place it into a 2D array...
Better method:
In the Functions Palette, select File IO, then Binary Files vi, and place the "Read from I16 File.vi"
You can wire directly to the output called "2D array".
(much simpler than above). You can then wire this into "array to Spreadsheet String.vi"..
Actually, an example may be simpler to explain...
(especially on a Friday
;o)
See attached example:
Attachments:
LV_Example.zip ‏17 KB

Similar Messages

Upgrading to 7 - Can't uninstall 6 **PLEASE PLEASE PLEASE somebody help!**

I keep trying to install iTunes 7 (have a 1G Nano), but am getting error messages. When I try to install, it gives me a box that says:
"This installation cannot directly upgrade the version of iPod software found on this computer. Please uninstall the iPod software and try again." [OK]
So, I've totally uninstalled iTunes and QuickTime and tried to reinstall, and keep getting the same message. Help!
I've searched/found anything to do with Apple/iTunes/iPod/QT,and deleted them. Deleted the Win32 Temp file too.
I've used regedit, deleted everything iTunes, Apple and Quicktime. Used MCISUU to uninstall installers.
Tried everything on the Apple support page that was suggested.
PLEASE PLEASE PLEASE somebody help!
PC Windows XP Pentium IV 1.4Ghz 1 GB RDRAM

I have the same problem - it seems like the old version is stuck on my computer even though I can't see it and when I try to download iTunes again it says to remove the old version first. Is there any help for this? Should I just try to download iTunes on another computer and use that instead? I feel like there is no hope for this!

Slow Macbook Pro- please help, I don't understand previous advice.

Hello all,
I have a very slow Macbook Pro running on Lion 10.7.3.
I looked up this problem on the forums before I sent this message but I didn't quite understand the advice. I have been on something called Disk Utility and Activity Monitor but don't really understand what I'm looking for. It seems a large percentage of my mac is 'idle' if that makes sense. Someone said to look at Page Out but I really don't understand what that means and what sort of numbers are normal.
I do have some storage left so I don't think it could be that. A lot of my gigabytes seem to be taken up by movies and 'other'. I've tried deleted a load of videos but it hardly made a difference. I have Mac Mail and it seems very slow on my Macbook compared to on my Ipad and iphone. iCal is also very slow on here and it always takes a while to load internet pages. It isnt the wifi connection.
Please help and bear in mind I am by no means a Mac whizz so you might have to talk in layman's terms!
Thanks,
Amy

If you have more than ten or so files or folders on your Desktop, move them, temporarily at least, somewhere else in your home folder.
If iCloud is enabled, disable it.
Disconnect all wired peripherals. Launch the usual set of applications you use when you notice the problem.
Step 1
Launch the Activity Monitor application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ If you’re running Mac OS X 10.7 or later, open LaunchPad. Click Utilities, then Activity Monitor in the page that opens.
Select the CPU tab.
Select All Processes from the menu in the toolbar, if not already selected.
Click the heading of the % CPU column in the process table to sort the entries by CPU usage. You may have to click it twice to get the highest value at the top. What is it, and what is the process? Also post the values for % User, % System, and % Idle at the bottom of the window.
Select the System Memory tab. What values are shown in the bottom part of the window for Page outs and Swap used?
Step 2
Launch the Console application in the same way as above, and select “kernel.log” from the file list. Post the dozen or so most recent messages in the log — the text, please, not a screenshot.
If there are runs of repeated messages, post only one example of each. Do not post many repetitions of the same message.

Soundtrack Pro 2 keeps crashing...please somebody help :(

So here's my problem.
I am running Soundtrack Pro 2 on my Mac Pro along with my Digi003. Both Final Cut Studio 2 and Logic Studio 8 are installed on my computer. Every application works fine except for STP2 that keeps crashing all the time.
I tried to uninstall it, reinstall it, reinstall Compressor, downloaded updates, Core Audio updates as well for the 003, downloaded the last Pro Applications Support but nothing seems to cut it.
The issue is as follow. I launch STP, the application scans (for the hundredth time) my plugins and detects something like 287 plugins. HOWEVER, the application crashes when the counter goes to 290.
My personal feeling is that the problem might come from either a conflict between Final Cut Studio 2 and Logic Studio 8 that installed both STP2 or, most likely, three plugins (the difference between 290 and 287) that STP2 has a problem with.
These last plugins scanned seem to be Amplitube X-Gear, a demo I deleted, Melodyne, that I downloaded lately and I guess something else. Also, I precise that I have not been able to rn STP for almost a year and as I am about to work on the post of a new film, I would love to use it.
The last thing I did was running the Terminal app that gave me a detailed report of the problem. I don't understand where it comes from though. So here's the report. If somebody can help, I greatly appreciate it!
Terminal Report :
Last login: Tue Nov 4 12:04:29 on console
/Applications/Soundtrack\ Pro.app/Contents/MacOS/Soundtrack\ Pro; exit
Welcome to Darwin!
romain-battaglias-computer:~ Romain$ /Applications/Soundtrack\ Pro.app/Contents/MacOS/Soundtrack\ Pro; exit
Soundtrack Pro(501,0xa000d000) malloc: * Deallocation of a pointer not malloced: 0x740073; This could be a double free(), or free() called with the middle of an allocated block; Try setting environment variable MallocHelp to see tools to help debug
Soundtrack Pro(501,0xa000d000) malloc: * Deallocation of a pointer not malloced: 0x2f003c; This could be a double free(), or free() called with the middle of an allocated block; Try setting environment variable MallocHelp to see tools to help debug
1
2
Soundtrack Pro(501,0xa000d000) malloc: * Deallocation of a pointer not malloced: 0x10d8b000; This could be a double free(), or free() called with the middle of an allocated block; Try setting environment variable MallocHelp to see tools to help debug
IKDriverAPI::Allocate
IKDriverAPI::IKDriverAPI
IKDriverAPI::Connect
IKDriverAPI::Disconnect
IKDriverAPI::Free
com.apple.soundtrackpro
2008-11-04 12:34:19.153 Soundtrack Pro[501] NSExceptionHandler has recorded the following exception:
NSUncaughtSystemExceptionException -- Uncaught system exception: signal 11
Stack trace: 0x95a5c521 0xffffffff 0x9011072c 0xffffffff 0x2949295d 0x90ccf800 0x90ccf7da 0x90ccece2 0x90cd4354 0x0016a859 0x0016aad3 0x0016be76 0x0016c3bb 0x0016b527 0x9326fc9f 0x9326f8fc 0x9326ee45 0x93266479 0x93265ea9 0x93265b0a 0x95f2fd2d 0x95f2fff0 0x95f2ff10 0x0016dbc6 0x0016b4a6 0x0027fab4 0x927f2237 0x908553d2 0x9084cb51 0x927ea7c8 0x927f1769 0x9327a976 0x9327a860 0x9327a35d 0x93279f28 0x927f7f21 0x927f7d4b 0x915226c5 0x915225f6 0x915224c2 0x92df5084 0x9327811d 0x93277b37 0x932718c4 0x95e011b3 0x0027d129 0x0000352e 0x00003455 0x00000001
2008-11-04 12:34:19.153 Soundtrack Pro[501] Exception raised during posting of notification. Ignored. exception: Uncaught system exception: signal 11
Killed
logout
[Process completed]

Probably an imcompatible plug-in.
Try renaming the plug-in folder momentarily, see if it boots okay.
If it does then you'll have to isolate which plug-in is causing the problem.

PLEASE somebody help me!!!!!!!!!!!!!!!!!!!!!!!!!!

Hi!
I'm trying to use Java Speech API in an applet but I get the Error message: NoClassDefFoundError.
I found out that in order to do that I need to do the following(http://java.sun.com/products/java-media/speech/forDevelopers/jsapifaq.html#applet-use):
How do I use JSAPI in an applet?
It is possible to use JSAPI in an applet. In order to do this, users will need the Java Plug-in (see http://java.sun.com/products/plugin). The reason for this is that JSAPI implementations require access to the AWT EventQueue, and the built-in JDK support in the browsers we've worked with denies any applet access to the AWT EventQueue. The Java Plug-in doesn't have this restriction, and users can configure the Java Plug-in to grant or deny applet access to the AWT Queue.
If you are using JRE 1.1:
Have your users follow these steps if your applet is based upon JDK 1.1:
Obtain a JDK 1.1.7 or better Java Runtime Environment (JRE). The reason for this is we have had problems with applet security being denied with JDK 1.1.6. Please note that the user needs the JRE and not the JDK. The JRE is freely available for download from the following URL:
http://java.sun.com/products/jdk/1.1
Before running the browser, have the user modify their CLASSPATH environment variable to include the supporting classes for JSAPI. For example, if the user has IBM's Speech for Java, have the user include the ibmjs.jar file in CLASSPATH.
Make sure any shared libraries for the JSAPI support are in the user's PATH. For example, if the user has IBM's Speech For Java, have the user include the ibmjs lib directory in their PATH (e.g., c:\ibmjs\lib).
Have the user copy the speech.properties to their home directory. A user can determine their home directory by enabling the console for the Java Plug-in. When the user accesses a page that uses the Java Plug-in, the Java Plug-in console will tell the user what it thinks the user's home directory is.
Use javakey to add your identity to their signature database (i.e., identitydb.obj). This will tell the Java Plug-in to trust applets signed by you. Information on javakey and signing can be found at the following URLS:
http://java.sun.com/security/signExample
http://java.sun.com/products/plugin/1.1.1/signed.html
Copy the identitydb.obj that was created or updated in previous step to the user's home directory (the same place where the user copied speech.properties).
Then perform these steps on your applet:
Use javakey to both create a signature database for your system and to sign your applet's jar file. This will allow the applet to participate in the security model.
Create an HTML page that uses your applet in the Plug-in. See http://java.sun.com/products/plugin/1.1.1/docs for more information on how to do this.
If the user experiences a "checkread" exception while attempting to run your applet, it's most likely due to a mismatch between the user's identitydb.obj file and the signature on your applet's jar file. A way to remedy this is to recreate your identitydb.obj and re-sign your jar file.
If you are using JRE 1.2:
The Java 2 platform's security model allows signing as done with JDK 1.1, but it also permits finer grained access control. The following are just some examples, and we recommend you read the Java Security Architecture Specification at the following URL before deciding what to do:
http://java.sun.com/products/jdk/1.2/docs/guide/security/spec/security-spec.doc.html
For a quick start, have your users do the following if your applet uses the Java 2 (i.e., JDK 1.2) platform:
Obtain the JDK 1.2 Plug-in.
Before running the browser, have the user modify their CLASSPATH environment variable to include the supporting classes for JSAPI. For example, if the user has IBM's Speech for Java, have the user include the ibmjs.jar file in CLASSPATH.
Make sure any shared libraries for the JSAPI support are in the user's PATH. For example, if the user has IBM's Speech For Java, have the user include the ibmjs lib directory in their PATH (e.g., c:\ibmjs\lib).
Have the user copy the speech.properties to their home directory. A user can determine their home directory by enabling the console for the Java Plug-in. When the user accesses a page that uses the Java Plug-in, the Java Plug-in console will tell the user what it thinks the user's home directory is.
Have the user modify their java.policy file in the Java Plug-in's security directory appropriately. There are many ways to do this. The following are just a few possibilities:
Grant all applets the AllPermission property. This is extremely dangerous and is only provided as an example. To do this, have the user modify their java.policy file to contain only the following lines:
grant {
permission java.security.AllPermission;
Grant permissions to a particular URL (e.g., the URL containing your applet). To do this, have the user add the following lines to their java.policy file:
grant codeBase "http://your.url.here" {
permission java.security.AllPermission;
The problem is that I don't understand some things, so if anybody knows something please send me an e-mail
[email protected]

For example I don't know what javakey is and I don't understand what I have to do with it.
By the way do you have any idea if this is going to work for my problem?
Thanks

HT1222 Please somebody help me! if how i can retrieve my notes?

Please somebody will help me because my note in iphone5 when i connect to itunes my notes deleted all... how i can retrieve it? thanks and regards...

Notes are designed to be synced to a supported application on the computer or a cloud service. Sync them back.

Interger.parseInt (PLEASE SOMEBODY HELP ME)

I'm getting the following error when using Interger.parseInt:
C:\Binary Files>javac IntsLookup.java
IntsLookup.java:9: cannot find symbol
symbol : variable Interger
location: class IntsLookup
int x = Interger.parseInt(args[0]);
^
1 error
So, if anybody kowns how to use Interger.parseInt, Please help. Here is the code that I'm using:
import java.io.*;
class IntsLookup{
public static void main(String[] args){
try{
DataInputStream in = new DataInputStream(
new FileInputStream("IntFile"));
int x = Interger.parseInt(args[0]); //where the problem is coming
int count = 0;
while(in.available()>0){
int k = in.readInt();
if(k == x) count++;
in.close();
System.out.println(count + " occurrences of" + x);
catch(IOException e){
e.printStackTrace();
With this code I'm just trying to read a binary file called, " IntFile "...
Please help if you know. Thankx in advance.
Joyce

My point exactly. I enjoy helping people with their java problems, that's why I'm here.
If someone doesn't know it should be Interger instead of Integer, that isn't a java problem. It's a general spelling problem. I'm not going to tell them so. Instead, I'll give them some (sarcastic, yes) hints in the hope that they'll actually learn something. Like where the javadocs are.

Please somebody help me lost audio after opened logic 9 and X at the same time helpppp

helppp please lost audio after opened logic9 and X together can't find the solution i only have audio in the main output of my audio interface gott a motu 828 MKII somebody help me please

Hello all looks normal when the problem was presented simultaneously opened LPX LP9 and when you return to open a new project or the same project and I only have audio in my headphones output interface, my interface is a motu 828Mk2 the project exists and the interface looks normal in every normal output comprises all looks normal just never sounds like it had passed but never opened the two programs at the same time not to do, I use a digital mixer yamaha normal surface responds as ccontrolador all seems to work perfect but I only have audio output from the headphones even if I motu channel by channel and I assign output sound headset

HELP! I'm pretty sure I have a virus. everytime I shut down my mac and open it the background changes. the only thing i've downloaded was a software upgrade. I just recently got this mac so have no idea how to fix it. Please somebody help me!!

I have just recently got a Mac, didn't buy an anti virus or anything because the store man said it wasn't necessary.
After two weeks of use this update software notification kept poping up, so I did and now everytime I turn my Mac on the background changes.
I've heard that this is how the Mac viruses start, I'm very new to this please somebody tell me how to fix it!!

There are no viruses for osx.
You are still under warranty. Call Apple Care. Make sure you get a case number as all repairs have an additional 90 days of warranty.
#1 - You have 14 days from the date of purchase to return your computer with no questions asked.
#2 - You have 90 days of FREE phone tech support.
#3 - You have the standard one year Apple warranty.
#4 - If you've purchased an AppleCare Protection Plan, your warranty last for 3 years. You can obtain AppleCare anytime up to the first year of the purchase of your computer.
Take FULL advantage of your warranty. Posting on a message board should be done as a last resort and if you are out of warranty or Apple Care has expired.

I switched phone with my brother and i could sucessfully restore everything to the new phone except my imessages. how can i restore them? and why this phone doesnt let my use my number, just my apple id for immesage/facetime? please somebody help me!!

after restoring all my stuff to the new phone, i wanted to see my messages but i discovered that all my imessages are missing. i checked in settings and i dont know why but the new phone doesnt let me use my phone number for imessage or facetime, instead it's using just my apple id. any idea how can i switch to the phone number again? in my old phone i used both my number and email for imessages, so i think maybe thats why i cant see my immessages now. please somenone help me!! thank you so much

Hi Katrina - I hear what you are saying about the problems. I've been using a BB Pearl here in Canada since January and I had the same problems with PocketMac from the start. iCal dates getting strangely duplicated after syncing and contacts in AddressBook groups getting listed twice on the BB. The only solution I used was to have the Mac always override the BB when syncing. NOt perfect but for me it was the simplest way to ensure the consistency of the data and my own sanity.
If anyone has a better solution that actually allows a clean sync I'd love to hear it.

My bb curve 8520 refuses to connect to my home wifi please somebody help me

i have had my bb curve 8520 for about 6 months now a not being the most hi-tech person in the world i have just downloaded bb app world altough i have managed to sucessfuly download a couple of free new apps to my bb
( battery booster and the sky sports live football scores app ) then i tried to down load TuneIn radio app as i like to listen to music when going to sleep and was fed up with using my top-up to keep paying for single tracks off the vodafone site at first the radio app just would not download that was at 4am this morning so this afternoon i thought i would give it another try and after a quite along wait it finally downloaded brillient thinks me but then when i went to use it i tried to connect to the USE WIFI ONLY option as i had just run out of credit but the wifi just will not let me connect to this app or website whatever it is i went to the connections on the home screen and selected wifi and connected it it said it was connected sucessfully so tried the app again but to no avail i have looked through a lot of posts on this forum and tried absolutly every thing that others have suggested some even say about not having a network service plan ( which i presume is your web monthly web allowance megabytes and that i hope anyway) but i know for a fact that i have one as i pay 5 pounds a month for 500mb and when i rang my account balance number this morning to use the vodafone I.O.U service it told me that my web allowance had been used so is there any one who can help me if this is the case about some websites and apps not being available unless you have or your service is paid upto date the why has it the wifi only option on the app and after it refuses me access to this app a screen pops up saying reload the screen but right at the top of the screen next to the app name there is a red warning triangle and next to it says" IO error :Tunnel...."
please is there any body out there that can help me with this its driving me mad thank you to anyone in advance if you can help with this

please please someone help me out T_T
«..:itufa¤Pitufo::..»

Please somebody help Flash Media Server 4

I've installed Flash Media Server 4 (I tried on i686 and x86 with CentOS)
also have uploaded applications to /opt/adove/fms/applications/test
here what I see in log files:
Connection rejected by server. Reason : [ Server.Reject ] : (_defaultRoot_, _defaultVHost_) : Application (test/_definst_) is not a valid signed application; loading access denied.
please somebody help

Are you sure that you are using adminconsole from location which mamata specified and not using some old adminconsole from you previous installation or something. I suspect you might be using older adminconsole.swf
You can also get same information using getLicenseInfo Admin command.
Please change your Users.xml to all getLicenseInfo or All. Open Users.xml under conf directory and you should find below text:
<AdminServer>
<HTTPCommands>




<Enable>${USERS.HTTPCOMMAND_ALLOW}</Enable>




<Allow>ping</Allow>



<Deny>All</Deny>





<Order>Deny,Allow</Order>
</HTTPCommands>
</AdminServer>
</Root>
Now change above content to below content:
<AdminServer>
<HTTPCommands>




<Enable>${USERS.HTTPCOMMAND_ALLOW}</Enable>




<Allow>All</Allow>



<Deny></Deny>





<Order>Deny,Allow</Order>
</HTTPCommands>
</AdminServer>
</Root>
Once you made the change , restart FMS and FMS Admin Server.
Once both services are restarted, open a browser and put following text in address bar and hit enter (replace necessary stuff like server-ip,AdminUserId and AdminUserPassword to your FMS ip, FMS Admin User and FMS Admin Password respectively)
http://<serverip>:1111/admin/getLicenseInfo?auser=<AdminUserId>&apswd=<AdminUserPassword>
Result displayed should have which edition you are using.

I updated my computer to the os x and now i can't export my videos to quicktime i got the new compressor still won't let me please somebody help

i updated my computer to the os x and now i can't export my videos to quicktime i got the new compressor still won't let me please somebody help

You need to update the software. This is a very old version that will not work with the current OS. Did you purchase the software from the App Store? If do sign in with the Apple ID used to buy it. Go to the Purchases page and find the software.

I don't understand hidden files

I am new to PE 9. I am trying to find a way to search for tagged photos and have only those that match the search to show up in the window. I don't understand why it has the option to hide the matches, I want to see only the photos that match but that is not an option. There must be something I'm not getting? The photos are in stacks and it still shows the whole stack but I don't want to scroll through thousands of pics to see which ones are a match. Help!!!

Recovery programs can only recover file that have beed deleted when the media space they occupied has not reused and written over. So if the recovery program did not recover your images. I would be willing to bet some of the space the image occupied has been written over. So it can not be recovered even though its delete directry enter can be read its data is no longer intact.
Without a system trace you have to rack your brain the remenber all you did. To get a clue to what wrote to your flash card. Its best to just copy file off flash cards onto your hard disk and remove the card from the card reader with the files still on the flash card. After processing your images on your computer its a simple quick process to format the flash card in camera.

TNT On Demand Unable to Sign In - Please somebody help me

This is my third plea for help. The only reason I went with FIOS was to get Showtime On Demand and TNT On Demand. I don't have a TV. I watch exclusively on line. Showtime works great. But I am unable to log into TNT On Demand. It did work two weeks ago using Chrome but not Microsoft Internet Explorer. Now neither works.
In Chrome I get the following message:
This website requires the Flash 10.2 (or higher) player.
You may upgrade your Flash plug-in by visiting the Flash Download Center.
Please note you may need to reboot your system.
I have Flash 11.6.
Then I get this:
Authentication Error
A timeout or configuration error caused this operation to fail. The error has been logged. Please try again.
In Microsoft Explorer I get no error messages. I just loop over and over to the sign on screen.
TNT help and support (which is very minimal) specifically states if we are a Verizon customer to contact Verizon customer support.
If you google this problem you will see the same complaint over and over. Then usually some Verizon person tells the customer that they will be contacted privately and I presume somehow the problem is resolved but the solution is never posted on line.
So please help me fix my problem.
I spent 45 minutes on line with someone a few days ago with no result. But he did something so that now I have to log into Facebook, Amazon, Hulu, Verizon, etc. over and over and over and my login is never saved. When a tech specialist changes a setting they ought to let the customer know what is being changed so the customer can undo it. This is most annoying.
And people, responding with "my computer works fine" isn't helpful. I know it works fine for someone else. It doesn;t work fine for me.
Pretty soon the new episodes of TNT Monday Morning and Southland will have scrolled off and I will miss them. I am getting desperate.
Solved!
Go to Solution.

carolamrt wrote:
This is my third plea for help. The only reason I went with FIOS was to get Showtime On Demand and TNT On Demand. I don't have a TV. I watch exclusively on line. Showtime works great. But I am unable to log into TNT On Demand. It did work two weeks ago using Chrome but not Microsoft Internet Explorer. Now neither works.
In Chrome I get the following message:
This website requires the Flash 10.2 (or higher) player.
You may upgrade your Flash plug-in by visiting the Flash Download Center.
Please note you may need to reboot your system.
I have Flash 11.6.
Then I get this:
Authentication Error
A timeout or configuration error caused this operation to fail. The error has been logged. Please try again.
In Microsoft Explorer I get no error messages. I just loop over and over to the sign on screen.
TNT help and support (which is very minimal) specifically states if we are a Verizon customer to contact Verizon customer support.
If you google this problem you will see the same complaint over and over. Then usually some Verizon person tells the customer that they will be contacted privately and I presume somehow the problem is resolved but the solution is never posted on line.
So please help me fix my problem.
I spent 45 minutes on line with someone a few days ago with no result. But he did something so that now I have to log into Facebook, Amazon, Hulu, Verizon, etc. over and over and over and my login is never saved. When a tech specialist changes a setting they ought to let the customer know what is being changed so the customer can undo it. This is most annoying.
And people, responding with "my computer works fine" isn't helpful. I know it works fine for someone else. It doesn;t work fine for me.
Pretty soon the new episodes of TNT Monday Morning and Southland will have scrolled off and I will miss them. I am getting desperate.
For TNT online with IE when I switched to compatability mode in the browser the login began to work. Make sure your Flash settings allow for sight storage for turner.com and the adobe authorization site. Also make sure your privacy setting always accept first party and session cookies. I posted more details in another thread.

Please somebody help- I don't understand binary files!!

Similar Messages

Maybe you are looking for