Please somebody help me lost audio after opened logic 9 and X at the same time helpppp
helppp please lost audio after opened logic9 and X together can't find the solution i only have audio in the main output of my audio interface gott a motu 828 MKII somebody help me please
Hello all looks normal when the problem was presented simultaneously opened LPX LP9 and when you return to open a new project or the same project and I only have audio in my headphones output interface, my interface is a motu 828Mk2 the project exists and the interface looks normal in every normal output comprises all looks normal just never sounds like it had passed but never opened the two programs at the same time not to do, I use a digital mixer yamaha normal surface responds as ccontrolador all seems to work perfect but I only have audio output from the headphones even if I motu channel by channel and I assign output sound headset
Similar Messages
-
Does Apple TV output audio via both HDMI and Toslink at the same time?
I would like to know if Apple TV outputs audio via both the HDMI and Toslink ports AT THE SAME TIME...
Ideally, I want to use it in my main zone connected to my TV via HDMI and convert the Toslink signal to analog to be exported to Zone 2 on my receivers. (My receiver - as do most - can only direct analog sources to Zones 2, 3, and 4)Hey Bob,
I have this same issue. I was wondering what model of toslink to analog adapter you went with and how well it works?
Thanks! -
Please Help: Brand new to Logic and Mac at the same time
Dear Board,
I joined the Mac family yesterday and have done pretty well with getting Logic and Cubase 4 installed on the Mac. (It's like trying to learn Spanish when you're from Alabama)
However, when I assign an instrument track to ESX sampler, no libraries or presets come up. I can hear one sound, but when I pull down the menu to load another sound, there are no other sounds to be found. Do I have them stored in the wrong place or did they not automatically load when I installed Logic?
Specifically, I am looking for a decent acoustic piano sound, but can't make it work.
I migrated from Logic 5 on PC to this setup yesterday, so it's all new to me. Any help you can give will be appreciated.
Thanks,
B3
Mac Pro Mac OS X (10.4.8) Logic 7.2Well a fellow Las Vegan, that is something I
havent seen since I have been on this forum.
Anyway welcome and good choice to go with
Logic Pro 7. This app is a constant challenge.
First I have to ask an obvious question, did you
install the contents disc? That is the one with all
the samples on it. Since you have been using a
different version, I assume you know how the
EXS works so that should not be the issue.
If you click on the black area no menus come up?
Or do empty menus come up? We will get it going,
this sounds like misplaced files. Phil -
Pr Premier monthly Cloud subscription open CS6 and CC at the same time with one subscription?
I download both CS6 and CC version.
I have a subscription for montly Premier Pro, but open just a CC version and not a CS6
WHY??
Do i need a second subscription for the same program??Thanks!
But as the CC version opens, the CS6 version does not open and says it has expired.
Do I have miss to set something? -
E93z All in One I want Audio playback through speakers and headphones at the same time
Hi there,
As the subject line reads I am hoping to enable playback through both the headphone and internal speakers on the E93z All in One unit I have.
Is there is currently a way to do this with the Lenovo HD Audio software for the Realtek system? It detects the headphones and does the typical shut off of the internal speakers however no option to enable playback through both seems to exist.
Running Windows 7 Pro 32 bit.
I cannot enable stereo mix (by right clicking in the playback area of the sound settings in Windows) to try and come up with a work around.
I have tried re-installing the drivers and not luck with more options to do this.
I have tried un-installing the Lenovo HD audio software and still no luck using the vanilla Windows 7 software.
Any suggestions would be greatly appreciated.Asad A wrote:
Well basically I want to hook in some external speakers via the headphones jack and the more speakers the better, I just figure if there's a way to have 4 speakers instead of just two it'd be cool, why let the internal speakers go to waste?
Do you know if plugging in headphones physically cuts off the internal speakers or if it's a software/driver thing?
Thanks to all who've replied
I'm pretty sure it's all in the OS, since the level control is right at the top. You can actually customize sound profiles individually for headphones or the built-in speaker, or any other sound devices. You can also use Bluetooth headphones (or a headset) or USB output devices. As far as I know, only one can be selected (in System Preferences) even if multiple ones are plugged in. -
How many meetings can be opened by one account at the same time?
I've tried Adobe Connect trial version.
There are few questions about the product.
1.How many meetings can be opened by one account at the same time?
I could open 9meetings at the same time using other PCs. What is the limit?
2.What is the maximum of students in a meeting?
I'm thinking of buying monthly/Individual product.
3.The meeting never end even though host is out of it. But we want to control.
Can host close a meeting so that all participants are out of the session?
Thanks for your attention.This depends on your licensing.
If you are using a Named Host license, then you can open one meeting at a time. If other members of the Meeting Host group are present in a room, then it should allow you to have multiple rooms open, one for each Meeting Host licensing being used.
If you are using the Concurrent Learner license, then each meeting you join uses a different licenses, so as long as you have concurrent seats available, you can open as many rooms as you want/need.
Maximum number of attendees (students) would be your room's concurrent maximum, less your self. The monthly version of Connect offers 25 concurrent attendees in each room, so that would be 24 students and you.
The meeting does end after it is dormant (no host) for ~15 min, however you can use the End Meeting function (Meeting > End Meeting) to close the meeting and remove everyone, including yourself, from the room. -
How to open multiple hotmail accounts at the same time ?
Hi,
Seems maybe normal for some people but I coming from internet explorer and with this explorer I was able to open multiple hotmail accounts at the same time, by default firefox can't do that, is there some setup to modify to open these at the same time ?
Thanks in advance for any help.
(Version updated 3.6.8)
Regards,
ChrisYou can look at one of these if you want to sign on with different identities at the same time:
* CookiePie: http://www.nektra.com/oss/firefox/extensions/cookiepie/
* CookieSwap: https://addons.mozilla.org/firefox/addon/3255
* Multifox: http://br.mozdev.org/multifox/ - Different logins at the same time -
I want to create one ActiveX control that can be use in VB and HTML. My control will consist 1 CommandButton, 1 TextBox and 1 Label.
My Objective is to have real time data passing between the same control which will be used at VB and HTML at the same time.
For example, from HTML if I click a button, the text at textbox at HTML will be pass to the label at VB at the same time. And vice versa where when button at VB is click, the text at textbox at VB will be pass to the label at HTML.
Help me.Hello Sam R.,
The ActiveX will be written in VB6 with Measurement Studio6. It's some sort of tutorial lesson for me to test the capability of DataSocket.
I want to create 1 control which will act as reader and writer. I am using Windows XP with IIS as web server and testing using 1 open VB6 Form with the control and 1 HTML file with the control using Data Socket Server with dstp://localhost/something. I dont know whether I need to have the script or not, what ever can do. tell me if it is the way to do. If it can be program directly in the control is better.
Basically, yes. the command button inside the control should updates both label and textbox.
If you can say that 1 datasocket control is enough, I will follow your advice because you are the expert.
I try before by using the example in DSReader and DSWriter but I cannot do the 'real time' updating when I click either button in VB6 or HTML page. It can only updated when I click again the commandbutton and -
Open/close 2 doors at the same time
Im having trouble (again).. this time - I need to open/close
two doors at the same time with the activation being from a button
(object) that is not linked to the doors. How can i get this done?
In addition to this, can i get lights to turn on/off at this very
same moment. For instance green light you can open the door... red
light door is already open.. or in process of open/close. Any help
is appreciated!jah_p,
I would use an object-oriented approach, using parent scripts
as the object envelop, so to speak;
if you are not familiar with object-oriented programming, you
would need at least a day to get it under control; once you have
figured it out you would create one generic 'door' object which
would have rotation amounts and opening and closing
methods/functions in it;
when you would instantiate a new door 'object' you would feed
it the door model that you want to open/close;
example:
[ code]
global purple_door_object
global yellow_door_object
on startmovie
purple_door = member("your_world").model("purple_door")
purple_door_object = script(
"generic_parent_script_for_doors" ).new( me , purple_door )
yellow_door = member("your_world").model("yellow_door")
yellow_door_object = script(
"generic_parent_script_for_doors" ).new( me , yellow_door )
end
[/code]
so at the beginning of the movie you create the door
'objects';
later when you press a button or whatever you would call one
of these objects, or both, and tell them to do their thing, such as
'open';
example:
[code]
global purple_door_object
global yellow_door_object
on someevent
purple_door_object.open_it( )
yellow_door_object.open_it( )
end
[/code]
your generic door object parent script would look something
like this:
[code]
property this_door_model
property total_degrees_to_open
property amount_to_open_each_frame
on new me , arg_door_model
this_door_model = arg_door_model
total_degrees_to_open = 85
amount_to_open_each_frame = 3
return me
end
on open_it me
-- the 'me' thing is confusing; you will have to read up on
it; I can't explain it;
-- here you will probably create a timeout object that will
call a rotate script every 50 milliseconds or so; and you will have
to do the math to see if the door is completely open yet; if so
then kill the timeout
end
[/code]
I hope that this helps;
dsdsdsdsd -
Recording Audio and Midi at the same time in Logic 7 Express Can it be done
I am wondering if I can record audio and midi at the same time in Logic 7 Express. I am running my guitar thrugh a Roland GR 33, and a line out and using the GR 33 to trigger sounds in the Logic's synth section but cant seem to record all three tracks at once. If any one knows how let me know. Oh and I am running the GR Synth and Guitar into the Prosonus Fire Fox and have the GR 33 out midi to the Fire Box as well. So I guss the question is how do I sent up two audo tracks and one midi track to record in real time. Thanks Victor
I am wondering if I can record audio and midi at the
same time in Logic 7 Express. I am running my guitar
thrugh a Roland GR 33, and a line out and using the
GR 33 to trigger sounds in the Logic's synth section
but cant seem to record all three tracks at once. If
any one knows how let me know. Oh and I am running
the GR Synth and Guitar into the Prosonus Fire Fox
and have the GR 33 out midi to the Fire Box as well.
So I guss the question is how do I sent up two audo
tracks and one midi track to record in real time.
Thanks Victor
Try arming the audio tracks, select one of the tracks, then while holding down the shift key, select the midi track you want to record, arming the "r" on the midi track. Press "record".....
HL -
Hi there.
Can I have two projects open on Premiere Elements at the same time?
The reason I wanna do this is because I've trimmed many hours of clips in one project (One timeline) and I want to start a new project where I have a "clean" timeline and can add clips from the
first project (Cut and paste). Or how do I bring a trimmed clip from one project into another in a easy way?
Thanks
-Dan-Your question is in the Photoshop Elements forum. There is another forum for Premier Elements and this will probably be moved.
That said, the answer is that Premier Elements has not be designed with the ability to cut and paste from one project to another. The only "work around" is to "Publish&Share" to a best quality format that matches your project settings. You can control the output clips with the "work area bars". You can then add the new clip to the second project. The output rendering process can, at least in theory, reduce the picture quality. Depending on formats, settings and footage, it may not be noticeable.
There is a third party product called Clipmate that some say works, but not always with good results. -
Can I open two Safari windows at the same time?
Can I open two Safari windows at the same time and split the windows in two on my screen? Right now, I have to open Safari and Firefox to get the split screen. I know I can press command to get multiple tabs, but that's not what I want. I want to use Safari on two open windows.
HI,
Open a browser window in Safari. Then Command + N
Press command and ~ or ` to toggle between the windows.
Carolyn -
Open 2 iTunes windows at the same time?
Using iTunes 11.0.4 is there a way to open to Playlist windows at the same time?
Thanks!!
PeterI know, I know. iTunes 11 has been a big step back, in my humble opinion. Had a few issues with iPad & iPod syncing and miss a few 'undocumented features' that I've come to rely on, like multiple windows.
Although one thing that has always irritated me is how (which I've submitted an [ignored?] feedback on) the view will reset back to the top/first artist when you are importing a CD ... it means you have to madly scroll through and click on a close-enough artist before iTunes moves on to importing the next track, otherwise the view scrolls back to the top again (I've got almost 28k songs in my library ... not boasting, I just like music). So it can be quite tedious.
Would happily revert to iTunes 10. -
Hi all,
thanks in advance for your advices.
I have a problem with my notebook (HP pavilion g6 2305 sl).
The problem is that when I connect my earphones the audio of my pc don't stop, hence I can hear (music, film, ...) both by earphones and speakers at the same time.
I tried to install again the latest driver audio, but nothing was changed.
I tried to use another pair of earphones, but nothing.
I have noted that if I connect the Jack at my pc, but not until the end, the audio stops from the speakers and goes through the earphones, but only if the jack is not completly inserted in the notebook.
I read a lot of forum on the web but I'm not able to find a solution for my problem.
(ps. the problem comes out suddenly, without any signal. I don't have installed any update or new software before the problem's start)Right click on speaker icon, lower right screen.
Choose playback devices.
Select "speakers and headphones" as your default.
Disable "communications headphones". -
Cannot open 2 Virtual Machines at the same time to access the same Database
Folks,
Hello.
I am installing Oracle Database 11gR2 RAC system using 2 Virtual Machines (rac1 and rac2) on the top of VMPlayer 3.
The VM rac1 and rac2 run correctly when one of them is shutdown.
Their locations are F:\VM_RAC\rac1 and F:\VM_RAC\rac2.
While rac2 is running, I open rac1. But this error message comes up:
Error: "Cannot open the disk F:\VM_RAC\sharerac\asm1.vmdk or one of snapshot disks it depends on. Reason: failed to lock the file."
While rac1 is running, I open rac2. But this error message comes up:
Error: "Cannot open the disk F:\VM_RAC\sharerac\asm1.vmdk or one of snapshot disks it depends on. Reason: failed to lock the file."
The 2 error messages are the same. This means I cannot open 2 VMs rac1 and rac2 at the same time. When we run RAC system, we have to open 2 machines or more than 2 machines at the same time so that all machines can access the same Database Server.
My question is:
Can any folk tell me how to have rac1 and rac2 run at the same time ?
Thanks.You need to disable disk locking, which ordinarily is performed by the first VM to prevent any other VMs from corrupting your vmdk files via uncoordinated writes. You will have to shutdown both of your VMs and edit the *.vmx flat file for each, adding lines like the following (settings taken from workstation 6, but should be nearly identical settings for VM Player 3.x):
http://crosbysite.blogspot.com/2007/10/clustering-in-vmware-workstation-6.html
scsi1.sharedbus = "Virtual"
disk.locking = "false"
diskLib.dataCacheMaxSize = "0"
diskLib.dataCacheMaxReadAheadSize = "0"
diskLib.dataCacheMinReadAheadSize = "0"
diskLib.dataCachePageSize = "4096"
diskLib.maxUnsyncedWrites = "0"
A few comments:
- your shared disks (scsi1) must be on a separate virtual scsi bus than the boot disk (scsi0), to allow setting the sharedbus flag as seen above.
- you must also ensure the cache parameters and unsynced writes settings are set to guarantee that all IO is immediately flushed to the vmdk file so the other VM can immediately access the latest version of data.
Maybe you are looking for
-
Can you put two iTunes libraries on the same computer? what is the best way?
Is it possible to put two iTunes libraries on the same computer? What is the best way to do it so the two libraries are not connected?
-
Clearing out logs on filesystem and database
We've got SOA Suite up and running well enough, but I was wondering how to control the various log levels and more importantly how to delete old logs for the various components. I assume that some logs are stored in the file system and some in the un
-
Toda vez que sincronizo meu iPhone com o iTunes, ele exclui a biblioteca do iPhone e copia tudo de novo, sendo que eu estou sincronizando no mesmo mac desde sempre.
-
Where did the current song listing go for iTunes Internet Radio?
I listen to internet radio on iTunes all the time, and I always loved being able to check the title and artist of whatever song was playing. I just upgraded my iTunes to 11.1.3(8) and now the internet radio no longer shows me the title & artist of t
-
Mail in queue !! The Admin server use the path twice !!
Do some know how to change the path I look in a lt of config file but I onl find one path (and the good one). This is the details message when I click on a incoming mail stayed in queue : Identifiant de message : 1AFAD4035E Date : Sat Feb 18 00:21:47