Please, somebody help me out if possible!

So i had a blackberry curve 9300 then it broke so when my girlfriend updated to a newer version she gave me her old one but the problem starts here :/
The blackberry ID on both the phone i have now and the phone my girlfriend has are the same and when i try and change the ID on my phone it changes on hers! really annoying me now and i dunno what to do + i updated my version of BBM and it wont work because of my ID
Any ideas how i could change it without messing up hers?

Ill give it a go tomorrow, is this the only way?
Cheers man, ill let you know how i get on!

Similar Messages

Hi.. I keep getting error message " No sim card installed " .. Can somebody help me out in this issue ? please

This message keeps coming almost now regularly too often .. Please somebody help me how to solve this .. I have tried removing the sim card but it is of no use ..

Hello henry lfrommiami,
Thanks for using Apple Support Communities.
To troubleshoot this issue where your iPhone gives you the message "No SIM Card installed" please follow the steps below.
Update your iPhone to the latest version of iOS.
Turn airplane mode on and then off again.
Restart your iPhone.
Check for a carrier settings update. Go to Settings > General > About. Install any available update.
Remove the SIM card and make sure that it's a valid SIM that your carrier provided. Also make sure that it's not damaged, worn, or modified. Then reinsert it.
A SIM tray that comes with one iPhone model won't necessarily work with a different iPhone model. When you insert the correct SIM tray, the SIM tray should be flush with the device.
If you have another SIM card, insert it. You can use a SIM card from any phone with the same format as your iPhone SIM card. If your iPhone works with that SIM card, contact the carrier that issued your original SIM card.
Restore the iPhone.
If you still see the issue, contact Apple support.
If you see 'No SIM' alert on iPhone
Cheers,
Alex H.

My bb curve 8520 refuses to connect to my home wifi please somebody help me

i have had my bb curve 8520 for about 6 months now a not being the most hi-tech person in the world i have just downloaded bb app world altough i have managed to sucessfuly download a couple of free new apps to my bb
( battery booster and the sky sports live football scores app ) then i tried to down load TuneIn radio app as i like to listen to music when going to sleep and was fed up with using my top-up to keep paying for single tracks off the vodafone site at first the radio app just would not download that was at 4am this morning so this afternoon i thought i would give it another try and after a quite along wait it finally downloaded brillient thinks me but then when i went to use it i tried to connect to the USE WIFI ONLY option as i had just run out of credit but the wifi just will not let me connect to this app or website whatever it is i went to the connections on the home screen and selected wifi and connected it it said it was connected sucessfully so tried the app again but to no avail i have looked through a lot of posts on this forum and tried absolutly every thing that others have suggested some even say about not having a network service plan ( which i presume is your web monthly web allowance megabytes and that i hope anyway) but i know for a fact that i have one as i pay 5 pounds a month for 500mb and when i rang my account balance number this morning to use the vodafone I.O.U service it told me that my web allowance had been used so is there any one who can help me if this is the case about some websites and apps not being available unless you have or your service is paid upto date the why has it the wifi only option on the app and after it refuses me access to this app a screen pops up saying reload the screen but right at the top of the screen next to the app name there is a red warning triangle and next to it says" IO error :Tunnel...."
please is there any body out there that can help me with this its driving me mad thank you to anyone in advance if you can help with this

please please someone help me out T_T
«..:itufa¤Pitufo::..»

Upgrading to 7 - Can't uninstall 6 **PLEASE PLEASE PLEASE somebody help!**

I keep trying to install iTunes 7 (have a 1G Nano), but am getting error messages. When I try to install, it gives me a box that says:
"This installation cannot directly upgrade the version of iPod software found on this computer. Please uninstall the iPod software and try again." [OK]
So, I've totally uninstalled iTunes and QuickTime and tried to reinstall, and keep getting the same message. Help!
I've searched/found anything to do with Apple/iTunes/iPod/QT,and deleted them. Deleted the Win32 Temp file too.
I've used regedit, deleted everything iTunes, Apple and Quicktime. Used MCISUU to uninstall installers.
Tried everything on the Apple support page that was suggested.
PLEASE PLEASE PLEASE somebody help!
PC Windows XP Pentium IV 1.4Ghz 1 GB RDRAM

I have the same problem - it seems like the old version is stuck on my computer even though I can't see it and when I try to download iTunes again it says to remove the old version first. Is there any help for this? Should I just try to download iTunes on another computer and use that instead? I feel like there is no hope for this!

Please kindly help me out.... i just update my iphone to the latest os but i was unable to set my phone up now

Please kindly help me out.... i just update my iphone to the latest os but i was unable to set my phone up now

Did you buy your phone unlocked from Apple or did you have the original carrier unlock it? Or did you have some third party unlock it for you? If the latter, and you are trying to set the phone up with a different carrier than the original, you're going to have problems as the update most likely reversed the unauthorized unlock.

I connected my brand new iPod Classic 160 GB to my brand new Sony home entertainment system through the headphone jack (to the audio line in). The volume is ridiculously low. Can somebody help me out here?

I connected my brand new iPod Classic 160 GB to my brand new Sony home entertainment system through the headphone jack (to the audio line in). The volume is ridiculously low. Can somebody help me out here?

Make sure the volume on the iPod is turned up fully, since this will affect what you hear through the stereo.
Make sure Volume Limit is set to full. (From Main Menu, Settings/Volume Limit)
If you purchased your iPod inside the EU (European Union), then the maximum volume from the headphone jack is lower than elsewhere in the world. If this is the case, buy yourself a 30-pin Dock Connector to 3.5mm jack lead, such as the one linked here...
http://www.amazon.co.uk/Decrescent-Connector-Stereo-Auxiliary-iPhone/dp/B007NIE5 EE/ref=sr_1_1?ie=UTF8&qid=1386012456&sr=8-1&keywords=30+pin+to+3.5mm
That connector will take a higher volume out (than the European Union's output) and that will be louder (and hopefully loud enough) through your stereo.

Can somebody help me out? I need a Corel Draw (.cdr) graphic converted to Illustrator

I'm trying to get a logo from brandsoftheworld.com but the one I want is in .CDR. I don't have Corel Draw (who does anymore) but I see that Illustrator 6 can open it. Unfortunately, I'm still on CS5.5. Can somebody help me out?

Send it to me. I'll save it as an EPS file for you.
Bob AT theindesignguy DOT com
TwitchOSX <mailto:[email protected]>
Thursday, January 24, 2013 7:11 PM
>
Can somebody help me out? I need a Corel Draw (.cdr) graphic
converted to Illustrator
created by TwitchOSX <http://forums.adobe.com/people/TwitchOSX> in
/InDesign/ - View the full discussion
<http://forums.adobe.com/message/5020999#5020999

Somebody help me out here!!!!!!! I cant figure out how to play games on mac

evertime i put a pc game in it asks me to look for a file to open it and its onlys the system profiler and it dont work how the **** do you play games on the mac book pRO!!somebody help me out it!!!!

The issue is that you are attempting to run software written for one operating system (Microsoft Windows) on another (Mac OS X). That doesn't work... However, that doesn't mean you're out of luck:
1. Many popular PC games also happen to be available native for the Mac. Check if the particular games you want to play have a native Mac version. If they do, using that is best since it's easier to install and use and will perform best.
2. Failing that, you can actually run Windows on the Mac in order to run the game. There are two supported methods to do this: dual-booting (selecting which environment to use when you start the computer), or virtualization (running Windows as an OS X application).
For games, particularly ones heavily reliant on 3D graphics, dual-boot is currently the best option. This is accomplished using an application called "Boot Camp" (search the Apple site) to setup disk space for the two operating systems and installing a menu that appears when you boot where you can select which operating system to run. Any Windows game will run in this way (assuming you otherwise meet the hardware requirements of the game).
The alternative is virtualization, and there are two packages for that: Parallels and VMWare Fusion (in beta testing). Both will eventually support hardware accelerated 3D, but its not really functional in either yet. However, these applications run Windows as an application under Mac OS X, meaning that you can be running the Windows and Mac OS X applications at the same time (as opposed to Boot Camp, where you have to select at boot time which to run).
Note that all of the approaches require you to have a copy of Windows to install (preferably a legally licensed one). Most people don't have a copy to use since they receive a hardware-locked OEM version with their computer that isn't transferable.
The advice above is applicable to Linux as well.

HT4623 after updating my iphone 3gs from os 4 to os 5.1.1, it left with activating the phone but i've been trying since and is still not activating, the notification given is ''activition server temporarly unavilable". can somebody help me out?

after updating my iphone 3gs from os 4 to os 5.1.1, it left with activating the phone but i've been trying since and is still not activating, the notification given is ''activition server temporarly unavilable". can somebody help me out?

First use JPanel not Panel.
Panel panels[]=new Panel[4];becomes
JPanel panels[]=new JPanel[4];Then refactor your code so that you use arrays correctly:
panels=new Panel();
panels.setLayout(new FlowLayout(FlowLayout.LEFT));becomes
panels=new JPanel();
panels[i].setLayout(new FlowLayout(FlowLayout.LEFT));
I did the above changes to your code and it worked fine.
Dave

Can somebody help me out please?

I have no clue in php or mysql. Just tinker with 'free' softwares that makes my life interesting and learning.
I am trying to use this software:
http://stanxterm.aecom.yu.edu/secondary/stocks/index.php
Which uses http://www.dadabik.org
I installed. Everything looks fine. But when I go to admin.php, my pages are blank-white. With the following errors:
Notice: Undefined variable: head_extra in ./header.php on line 110
Laboratory of so and so - Laboratory of so and so - Lab inventory
Notice: Undefined variable: log_status in ./header.php on line 129
Notice: Undefined variable: business_logic_included in ./interface_creator/check_login.php on line 58
Warning: Cannot modify header information - headers already sent by (output started at ./header.php:76) in ./interface_creator/check_login.php on line 63
And in other places, there are many errors. like
Notice: Undefined variable: table in ./header.php on line 133
Could somebody please help me out?
Thanks,
drb

Have you read the application README file and confirmed that you meet all the requirements for installing it? The best place to start would be your apache error_log, which on some systems is located in /var/log/httpd/error_log .. (assuming you're using Linux).
Just as a side note, I tried using dadabik one time, and I couldn't get it working right away.. it wasn't setup to handle the 10g "easy" connection format, and the traditional connection format wasn't working, either. I had to hack around in a few of the scripts to get it running, at which point I was underwhelmed with what it could do. It requires one of the "magic quotes" settings to be turned on, which can be a security risk in certain situations.

Hi iam unable to connect to itunes stores.i think the problem is with my network but i dont know how solve it please guys help me out.Moreover this happened when i was updating my iphone 4 and i am not even able 2 use my iphone.

i ran the diagnostic test and got this result.please help me out friends
Microsoft Windows 7 Ultimate Edition (Build 7600)
TOSHIBA ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ
iTunes 10.6.1.7
QuickTime 7.7.1
FairPlay 1.14.37
Apple Application Support 2.1.7
iPod Updater Library 10.0d2
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 5.1.1.4
Apple Mobile Device Driver 1.59.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.5.502
Gracenote MusicID 1.9.5.115
Gracenote Submit 1.9.5.143
Gracenote DSP 1.9.5.45
iTunes Serial Number 0015AB8402A8B010
Current user is not an administrator.
The current local date and time is 2012-05-15 09:28:41.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is supported.
Core Media is supported.
Video Display Information
Intel Corporation, Mobile Intel(R) 45 Express Chipset Family (Microsoft Corporation - WDDM 1.1)
Intel Corporation, Mobile Intel(R) 45 Express Chipset Family (Microsoft Corporation - WDDM 1.1)
**** External Plug-ins Information ****
No external plug-ins installed.
iPodService 10.6.1.7 is currently running.
iTunesHelper 10.6.1.7 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
**** Network Connectivity Tests ****
Network Adapter Information
Adapter Name:        {3E4453B3-9F50-4117-8981-7391E871F420}
Description:            Realtek RTL8187B Wireless 802.11b/g 54Mbps USB 2.0 Network Adapter
IP Address:             0.0.0.0
Subnet Mask:          0.0.0.0
Default Gateway:    0.0.0.0
DHCP Enabled:      Yes
DHCP Server:
Lease Obtained:     Thu Jan 01 03:00:00 1970
Lease Expires:       Thu Jan 01 03:00:00 1970
DNS Servers:
Adapter Name:        {2E1A8652-B977-4486-A1C2-4D1EDC4204CF}
Description:            Marvell Yukon 88E8040T PCI-E Fast Ethernet Controller
IP Address:             192.168.1.18
Subnet Mask:          255.255.255.0
Default Gateway:    192.168.1.1
DHCP Enabled:      Yes
DHCP Server:         192.168.1.1
Lease Obtained:     Tue May 15 09:21:21 2012
Lease Expires:       Fri Oct 12 09:21:21 2012
DNS Servers:         192.168.1.1
Active Connection: LAN Connection
Connected:             Yes
Online:                    Yes
Using Modem:        No
Using LAN:             Yes
Using Proxy:           No
Firewall Information
Windows Firewall is on.
iTunes is enabled in Windows Firewall.
Connection attempt to Apple web site was successful.
Basic connection to the store failed.
The network connection timed out.
Connection attempt to Gracenote server was successful.
Last successful iTunes Store access was 2012-05-07 20:18:49.

Check your system for possible Malware. But you have to do it in WIndows Safe Mode.
(Do not use your own Anti-virus to SCAN)
Start your computer in "Safe mode with networking", go to this link download a free version of Malwarebyte.
http://www.malwarebytes.org/products/malwarebytes_free
Install and perform update immediately, then do a full SCAN. Remove malware if it indeed finds any. Restart computer to regular windows to let Malwarebyte complete the removal.
To start your computer in safe mode
Press and hold the F8 key as your computer starts. You need to press F8 before the Windows logo appears. If the Windows logo appears, you'll need to try again by waiting until the Windows logon prompt appears, and then shutting down and restarting your computer.
On the Advanced Boot Options screen, use the arrow keys to highlight the "safe mode with networking" option, and then press Enter. Log on to your computer with a user account that has administrator rights.
When your computer is in safe mode, you'll see the words Safe Mode in the corners of your screen. To exit safe mode, restart your computer and let Windows start normally.

Need to add JList to a Panel Please do help me out!!!

hi every body I need to add JList to Panel in a JTabbedPaneand having three columns by gridlayout,I have to add Jlist elements in one column and in the second one get elements from the database and place them in this column with a check and in third column i have some buttons
in the first column add Jlist elements around 10 elements
in the second column can we use check(true/false) for the data which we got from the database,when we uncheck here the list corresponding in the first should be disabled.
I am using swings please give me ur ideas can this be made in different ways how can this work
i am trying this since yesterday but could't get the correct way
do help me out
thanking you
with regards

Just when you change status of radiobutton or checkbox in its changeListener event call
setEnabled( false );
for the appropriate JList
I hope that you didnt wanted me explain you entire possible code and blah blah

HT1222 Please somebody help me! if how i can retrieve my notes?

Please somebody will help me because my note in iphone5 when i connect to itunes my notes deleted all... how i can retrieve it? thanks and regards...

Notes are designed to be synced to a supported application on the computer or a cloud service. Sync them back.

Please, Someone Help Me Out. I Try To Install Itunes 8.2 But Get An Error.

I have posted this question multiple times and nobody has helped me out so this is my last time. Everytime I try to install Itunes 8.2, I get an error saying, "The older version of Bonjour cannot be removed. Contact your technical support group." Can someone please help me out with this one?

Get this microsoft utility and use it to remove Bonjour.
http://support.microsoft.com/kb/290301

Please somebody help me lost audio after opened logic 9 and X at the same time helpppp

helppp please lost audio after opened logic9 and X together can't find the solution i only have audio in the main output of my audio interface gott a motu 828 MKII somebody help me please

Hello all looks normal when the problem was presented simultaneously opened LPX LP9 and when you return to open a new project or the same project and I only have audio in my headphones output interface, my interface is a motu 828Mk2 the project exists and the interface looks normal in every normal output comprises all looks normal just never sounds like it had passed but never opened the two programs at the same time not to do, I use a digital mixer yamaha normal surface responds as ccontrolador all seems to work perfect but I only have audio output from the headphones even if I motu channel by channel and I assign output sound headset

Please, somebody help me out if possible!

Similar Messages

Maybe you are looking for