Please someone has to know how to delate the text box and not the word or the page

HI
someone has to help i am trying to make a wedding invites on word but we dont want the text box how do you get rid off it with out dealeting the page.
What is a good progame to use to created wedding invites?

Then you should probably post your question on the Microsoft Mac forums since it's their software you have questions about...
http://answers.microsoft.com/en-us/mac

Similar Messages

How do I get rid of the dialog box and audio that is in the bottom left of the screen that keeps telling me what I'm doing or need to do?

How do I get rid of the dialog box and audio that is in the bottom left corner of the screen running script and audio of what I'm doing or need to do?

Go into System Preferences, select Universal Access, turn off Voiceover.

When preview my ibook on IPAD the text on the edge of the text box is not visible. How do I fix that?

When I preview my ibod created in Ibook Author on my IPAD some of the text on the edge of the text box is not visible. How do I fix that?

Does the iOS device connect to other networks? If yes that tend to indicate a problem with your network.
Does the iOS device see the network?
Any error messages?
Do other devices now connect?
Did the iOS device connect before?
Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on your router
.- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem and it does not connect to any networks make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

How to change the size of the text box in "Notes"

Dear All,
I am trying to change the text box size of that is used in the Notes section. Currently the displayed size features 5 rows, I want to increase it.
I tried to increase the starting and ending Row numbers in the UI configuration, but it still stays the same size!
Anyone know how to resolve this problem, we really need it !
Thanks.
Best regards,
Rohit L.

FYI: We were able to resolve the issue by changing the GETTER-method of the attribute LINES in the component GSTEXT:
method GET_P_LINES.
CASE iv_property.
    WHEN if_bsp_wd_model_setter_getter=>fp_fieldtype.
      rv_value = cl_bsp_dlc_view_descriptor=>FIELD_TYPE_TEXTAREA.
    WHEN if_bsp_wd_model_setter_getter=>fp_textarea_rows.
      rv_value = 16.
ENDCASE.
endmethod.
Hi Gerd,
could you resolve your issue?
We try to do the same and just adding "rows" does not work for us either.
Thanks and regards,
Stefan
Edited by: Stefan Heitmann on Jul 13, 2010 1:04 PM

How do I run an Apple Script only when the computer is awake at the specified time and NOT upon waking after the specified time?

I've been using Steve Lambert's SelfControl to block myself from certain time-sucking internet sites for a certain period of time every day. I've automated the program launch using an AppleScript that runs based on an iCal alarm, but the problem is that if my computer has been asleep or shut off, the script will run as soon as I wake it up or start it up, and that can be very inconvenient if I'm intending to use my computer not during the hours when I intended to restrict access to such websites.
So, is there any way to schedule an AppleScript to run *only* if the computer is running at the designated time and not upon waking/starting up after the alarm has passed if the computer was asleep/off?
I started investigating launchd, as I understand this is the successor to cron/crontab in OS X Lion, but it appears that launchd has the same behavior I dislike in the iCal alarm approach--the script will run upon waking even if the time when it was supposed to run has already passed...unless there is a way to change this behavior?

The obvious/easy solution would be to add some logic to the script to see what the time is.
If you expect the script to run at, say, 1pm, but the script checks the time and sees that it's 5pm then you can assume the machine was asleep at the time and thefore you can bail out gracefully.
if (hours of (get current date)) = 13 then
-- it's sometime in the 1pm hour...
end if
You can fine-tune the check as much as you like

How to link a text box to an anchor frame in the master pages?

Ok, as the title states, we are trying to figure out if it is possible to link a text box to an anchor frame in the master page. When you look at our Master Page layout, we have a text box in the upper left hand corner of the left hand page, this is used for our machine serial numbers. Then we have an anchor frame that automatically fills out the figure number. Let's say I have pages 2 & 3 (left & right), they have a S/N at the top of the page for the machine, then pages 4 & 5 have a different S/N. If I have to add more pages in between pages 2 & 3 (bumping the current 4 & 5 to 6 & 7), the anchor frame bumps to the next page, but the S/N text box doesn't. Is there a way to fix it so that they both move to the next page? Thanks for the help.
P.S. I can include images and other info if needed.

I have included a two pictures that should help me explain.
Master Page:
This is the master page set up, the "Page Text Box" has the flow set to "B" while the S/N text box has the flow set to "A". This setup is for our parts manuals, the left page is usually an illustration while the right page is usually a parts list. The text box, anchored frame & paragraph tag are empty in the master page set up. The "page text box" has a flow of "B" and the "S/N text box" has a master flow of "A".
Body Page 1:
When we create new pages, the paragraph tag automatically fills in the figure title on the left page, then we add an anchor frame within the text box to hold the illustration. You will notice that I added in a "test" serial number at the top of the page. Now if I need to go back and add two pages before this, the anchor frame, illustration and parts list will move to a new page, but the S/N text box will not. The "Before S/N TBD" would stay on the original page.
This is what happens, the text box containing the illustration and the parts list "bump" to the next page, but the S/N text box does not. So the question we have is there a way to link that text box to the page so when we create new pages the S/N text box moves with the illustration.
Does this help?
Thanks for the assistance Error7103.

How to grant protection to data and not to structures containing the data?

Dear All,
I have a question regarding authorizations in BW. Maybe someone can give me a good advice.
We have the following situation: a group of developers in BW should be able to develop and to "move" within BW without any limit or constriction. Another group of developers is not allowed to see some specific data, since they are sensible data from some external system regarding third party business. These data are contained in structures (Infocubes, DSOs, Multiproviders, ecc) all having the same naming convention, let´s say ZNVS*. Apart from that, they have exactly the same authorizations as the first group.
I am able to restrict access to infoareas (and underlying objects) by means of authorization objects like S_RS_ICUBE, S_RS_ODSO, ecc. This was easy and it does work fine: the user is not able to see any of tha data contained in the protected objects.
But, what if they tipp the DSO active data table name in SE11? They are able to get to the data. I know that i could link a table name to an authorization group and through the authorization group restrict the access to the table, but it is not realistic to think that it can be done for every new structure created in BW.
Now the question:: how can I avoid that? Is there any solution granting protection not to the data warehousing structure (dso, infocube, ecc) but to the data within the structure itself, no matter how i try to get to them?
Hope, my question is clear.
Thanks in advance
Best regards
Enrico
Edited by: Dottblabla on Jun 3, 2010 2:42 PM

Hi Brian,
thanks for your answer.
According to my knowledge and to my understanding analysis authorizationrefers to another issue. I am not talking about authorizing or not authorizing some user for some values or data when executing a query. I am talking about not authorizing those user to get access tho those protected data when developing in the BW system (i.e. by executing SE11 for DSO active table)
Is my understanding of analysis authorization wrong?
Thanks
Best regards
Enrico

When I type in search words in the google box and then drop down to the search that matches what I want, and click on it, it does absolutely nothing. It used to complete the search, how do I get it to complete the search?

Here is an example:
I type Denver Dum in the google box.
It gives me several options, one is Denver Dumb Friends League, which is what I want. I bring the cursor to Denver Dumb Friends League and click. It does nothing. The google box still has Denver dum in it. The only way to get a search to be completed is if I type in the whole phrase and hit enter. How do I get it to search using just part of a phrase? It used to do this before I upgraded to the newer version of firefox. Thanks!

Do you have the Google Toolbar installed?
See:
* http://www.google.com/support/toolbar/bin/static.py?page=known_issues.cs

I was trying to install windows in my mac pro, but, i dont know how, my mac system was deleted and now i just have the windws system and its wireless isnt working what do i do?!

What do u think that i need to do stay with windows, if its your answer, tell me how to make the wireless work
If your anwers is install mac again tell me how can i install it again i dont have the installation disk
Help Me Plz

Go to the Windows Control Panel and select Boot Camp applet. In that applet there is a Boot Drive option. Select Mac OS X.
Or restart the system and hold down the Option key for a few second. A Boot Menu screen will come up. Select Macintosh HD.
Once in OS X go to the Sys Prefences, Startup Disk and select Macintosh HD Mt Lion 10.8.2 and click Restart then Restart again. the system will now restart in Mac OS X.
To boot back to Windows do the same, Startup Disk, and select Windows then Restart and Restart again.

How to get the text boxes and select lists dynamically?

Hi,
I have a requirement such that I need to create the text boxes and select lists depending on the user input at the run time. It means that if the user requires four text boxes/select lists then I need to have 4 such thing. If the user need 6 then I need to have 6.
The design may be such that initially only one text box/select list will be available when the page launches. Then as ad when the user asks for more those will be available to the user accordingly.
regards,
Dipankar.

You can use Ajax to call textboxes and select list based on what user enters.
Otherwise make those items conditional and based on what user enters you can display textbox or select list.
You can call Single Textbox and Select List using Ajax for any number of conditions.
Regards
Chandra

In latest Nightly, arrow keys don't move the cursor but instead exit the text box. How can I fix this so that the arrow keys move the cursor?

Using Nightly 28.0a1, I'm having a problem with the text box fields when typing. I use Hacker's Keyboard which has onscreen arrow keys and I find it more convenient than fiddling with a tiny cursor thumb when editing text. On the Play Store Firefox it works just fine but on Nightly, any time I try to move the cursor with the arrow keys it jumps out of the text box and highlights other elements on the page. This is annoying beyond belief as it means having to resort to that imprecise thumb cursor that takes forever to get where you want it. Is this a known issue with the latest nightly builds?

Thanks for the report. I have filed bug https://bugzilla.mozilla.org/show_bug.cgi?id=939959. It would be helpful to know and if you can comment into the bug to indicate which input field you are testing on.

I had set my passcode by pressing 1 repeatedly till it filled the passcode box. I dont know how many times I have pressed 1. Can someone tell me the character length of the text box of the Passcode

Hi,
My son foolishly pressed a single digit till it just filled the text box of the passcode. Now i dont know how many times he has pressed it. If I can know the charcter length, or how many digits can just fill the text box of passcode, I can unlock my ipad2. If anyone reading this has ipad2, he can do the same thing and count how many digits will just fill the text box. I will really appreciate the help.
Thanks

You can put the iPad into Recovery mode and Restore it. See this link and note the sentence commencing, 'If you restore from a different computer.... ' down near the bottom of the page.
http://support.apple.com/kb/HT1808

I need to know how to print a text meassage to my printer?

I would like to know if anyone knows how to print a text message from your phone or from the pc?

1. Another option is using the "Google Cloud Printer" App. Yes there are times were I send myself a text message, in order to print it, and store it on my computer. Then there times are times that I use the Google Cloud Printer App.
2. You have the option to set-up the "Google Cloud Printer" App to use a classic printer or an e-printer. I do not have an e-printer, but I have used the classic printer method okay.

How do I remove text boxes from Pages

I have an awful time with Pages on my lap top. I am used to Appleworks 6.2 on my older desktop (PowerMac G4 / OS 10.4.11). If I specify a US letter page I get that in Appleworks, it is then 8.1/2" x 11", without running into pre-existing formats or other similar distractions. I can immediately type a neat business letter.
Not with Pages. On my MacBookAir, with Pages 4.3 and OS 10.8.4, I can type alright, but when I want to print what I typed, only a small part of what I typed shows up in in Print Preview of my typed page. After a bit of backtracking, I notice a blue-lined rectangle on my typed page containing the portion of my typing that appeared in that Print Preview. It is apparently a self-formed "text box", that was not a part of my blank template page and was not inserted by me while or just before I typed.
I did not find any way to delete the edges of that text box. The "delete" option under the pull down edit menu is blanked out. If I click on the "Text box " symbol in the menu bar it does not let me switch off the text box, but instead gives me another text box inside the first one! I suppose this is to allow user to print only a single keyboard stroke of the entire letter. The "Inspector" seems to have no options to set text boxes.
Pages "Help" Menu has nothing of how to delete a text box, or how to prevent it in the first place from screwing up what you have typed in such manner that it becomes unprintable.
Similarly a small rectangular box formed on both the top and the bottom of each page (which could be a space reserved for a header or footer), but again I do not use these on my business letters, and they appear self-formed by Pages, and I would like to know how to prevent them, or delete them.
In other words I like to get a blank page to start with, which will only set up and type what "I, THE USER" enter on my keyboard.
Can anybody tell me how to this with Pages?
(PS. I can do it with even with Thunderbird !)

1. Open a blank Word Processing template (they are listed in the Template Chooser sidebar), you have opened a Layout template that requires Textboxes for you to type into.
2. To select a Textbox hold down the command key and click on its edge or lassoo it, then hit delete.
3. If you don't want Headers or Footers, uncheck them in the Document Inspector
4. Download the Pages09_UserGUide.pdf from under the Help menu and familiarise yourself with Pages' basics. Also look around your Menus and Inspectors which are laid out logically from left to right from broad to details.
I suggest you click inside your textbox first go command a and copy the contents before you delete it and then paste that into a new Word Processing template.
Peter

How do I Expand the Text Box in Mail Stationery?

I have a question about using stationery in Mail. Is there anything I can do to make the text box in certain templates to hold more content? It seems that, in some templates (like Bamboo, for example), the text box expands automatically as more content is keyed in. Yet, in the Tack Board template, for example, the text box does not expand beyond what seems to be a fixed length for content. How can I get the text box in Tack Board to expand for additional content?

Please check text input state defined , also if the form is inserted in any container then try to test out the form with different text input boxes in a new page.
Additionally , check the mid-hieght of text inserted in frame.
Thanks,
Sanjit

Please someone has to know how to delate the text box and not the word or the page

Similar Messages

Maybe you are looking for