Please specify Transaction code to load SCM ROUTE MASTER DATA (EWM Routes)

Please specify Transaction code to load SCM ROUTE MASTER DATA (EWM Routes data).
Regards
Dhirendra
Moderator message - Moved to correct forum
Edited by: Rob Burbank on Apr 21, 2009 8:58 AM

Route definition is done at 0VTC. You have define the Route with its description, Transit time, factory calender, carrier info etc. It is stored in TVRO table
Then yoiu will maintain the route determination in 0VRF.
Route Determination:
Dep zone of the shipping point + Destination zone (T-zone) of the ship-to + Transportation group + shipping conditions.
Route determination details are stored in TROLZ table.

Similar Messages

  • Transaction code to list the warehouse master data objects

    Hello all,
    Is there any transaction code that lists all the warehouse master data objects/ reports. If there is any transaction code or document related to it pl. post it.
    Thanks,
    maxx

    Hi Greetings
    Transaction : SAP1
    Logistics Execution --> Warehouse Management --> Master Data
    You can find Number if WM master data reports.
    Gobinathan G

  • Transaction Codes or Path to get following Data / Reports

    Transaction Codes or Path to get following Data / Reports
    1 Report on Trial balance – GL account balances
    2 List of manual checks that are cut.
    3 List of manual JE to GL for payments made.
    4 List of EFT payments.
    5 List of sales transactions within a specific period – Sales Order in a certain time period
    6 List of manual checks deposits
    Thanks for help in advance

    Hi Ashish,
    Use the tcode SEARCH_SAP_MENU for this purpose. You will be able to view all the available transactions with their nodes, preceeding nodes and tcodes.
    Thanks
    Janani
    award points if helpful

  • Transactional Data Load without Respective Master Data in Place

    Hi Folks,
    Could anyone let me know if i could load transactional data without loading the respective master data. If yes, well could you give me a scenario when you do it. Also could you let me know the option of how to load transactional data without master data in place.
    Best Regards,
    Prithvi

    Hi,
    You can load transaction data without loading master data.
    You have the option in the info package to load data even if no master data exists..
    You may use it in cases where your transfer rules/update rules or routines donot refer to master data tables to populate transaction data..
    Ashish

  • For transaction code MD61, I want to upload data using BAPI

    Hi,
    for transaction code MD61, I want to upload data using BAPI.
    Which BAPi I ll call ?
    Can anyone suggest me how to do it with any simple example program ?

    Refer the thread for details about coding-
    BAPI_REQUIREMENTS_CREATE
    Reards,
    Amit

  • Load customer text master data error

    Hi Experts:
    When load customer text master data ,system show the following error message ,could you please
    help me to solve the problem , thanks a lot
    Error message from the source system
    Diagnosis
    An error occurred in the source system.
    System Response
    Caller 09 contains an error message.
    Further analysis:
    The error occurred in Extractor .
    Refer to the error message.
    Procedure
    How you remove the error depends on the error message.
    Note
    If the source system is a Client Workstation, then it is possible that the file that you wanted to load was being edited at the time of the data request. Make sure that the file is in the specified directory, that it is not being processed at the moment, and restart the request.

    Delete PSA request from Datasource -> manage
    Do a fresh load and Goto to infopackage monitor
    Environment --> Short Dump --> in Source System...... Click 'TODAY'
    Next screen would show u all Runtime Error... Double click on the first one
    from the next screen, u can do analysis by double clicking 'What Happend ?', What can u do? Error Analysis..
    By doing this U can find out what exactly is the problem

  • What r the ways to reduce the load time of master data

    Hi
    The full load of the master data load IP is taking 18hr to 2 days loading on average 2516360 Records
    Is their any option to reduce load time as its causing data base lock and impacting transports(other than data selection)
    Thanks in advance
    Anuj

    You will have to do some research. What MD extractor are you talking about?
    Test on R/3 system: First try to extract a considerable amount of records via transaction RSA3 in R/3 (10.000 or 100.000). Keep the time that it takes.
    Extract the same into BW but only into PSA. Again measure the time.
    Load data from PSA into datatarget and see how long this takes. You should now have a picture on where the performance problems are located.
    Is the performance also bad for small loads or is there a boundary before which performance is ok. (in other words, is loading 200.000 records ten times longer then loading 20.000 records?)
    Suspect the following in R/3:
    - datasource enhancements in R/3. A redesign may improve your extraction in a big way.
    - missing indexes. If you are extracting data from tables without proper indexes the extraction performance can be dramatic.
    Suspect the following if loading to PSA is bad:
    - Datapackage reads data in small chunks (much smaller than 50000 records). Overhead causes more time than the actual data transport.
    - Network problems. Maybe the network is congested by other servers?
    If loading from PSA to datatarget is slow:
    - Check start routines for performance.
    - Are enough batch partitions available? Sometimes activation of ODS can be improved by more parallel processes.
    - Are you using a lot masterdata-lookups when filling the datatargets?
    When you report you findings in this forum we may be able to help you further.

  • Load Failure for Master Data object

    Dear Sdns,
                        Am doing daily master data loading for VENODR_ATTR master data object.... Am loading it through DELTA Update.... I got an error in Status Tab.
    rror message from the source system
    Diagnosis
    An error occurred in the source system.
    System response
    Caller 09 contains an error message.
    Further analysis:
    The error occurred in Service API .
    Refer to the error message.
    Procedure
    How you remove the error depends on the error message.
    Note
    If the source system is a Client Workstation, then it is possible that the file that you wanted to load was being edited at the time of the data request. Make sure that the file is in the specified directory, that it is not being processed at the moment, and restart the request.
    The Error Message is : - Update mode R is not supported by the extraction API.The application program for the extraction of the data was called using  
    update mode R . However, this is not supported by the InfoSource.        
    Kindly Help me if any of the Snd people might have face this kind of problem...
    Answering Getz Appreciated,
    Warm Regards,
    Aluri

    Hi Aluri,
    The file might be used or being edited by some other person when you are doing the delta.
    CHeck the source system connection @ AWB.activate it.
    Follow these steps
    1. Activate transfer rules for data source in source system.
    2. Activate the ODS
    3. Activate the update rules (ods to ods and also ods to cube)
    5. Right-click at the ODS, choose 'Generate Export Data Source'
    6. Replicate the data source
    7.se38---->RS_TRANSTRU_ACTIVATE_ALL for source system .
    Then start data loading again.
    Hope this helps.
    Assign points if useful.
    Thanks & Regards,
    Bindu

  • Company code feild in cost center master data urgent plzzzzzzzzzzzzzzz

    hi
    iam not able to find company code feild in cost center master data. how to make it appear

    Hi Santosh,
    Please check whether How many company codes are assigned to your controlling Area.
    If it is more than one, then the Company code field will come at the time of creation of Cost Center.
    If it is only one company code assigned to Controling Area then the Company Code filed will not be visable.
    Best Regards
    Kamma

  • GETWA_NOT_ASSIGNED short dump when load business partner master data

    Hi
    I've this error GETWA_NOT_ASSIGNED short dump when load business partner master data, it's running in BI 7.0 with support package 12.
    The error is because the field symbol is that pointed to the line of an internal table that was deleted.
    I think that it's an incompatibility between subroutine and unicode.
    Do you have idea about correct this error?
    Regards
    Jose.

    Hi Ravi
    Yes, it's a dump
    It's when running a process chain to load Business partner master data
    The error say:
    -.You address a field symbol that pointed to the line of an internal table that was deleted.
    -.You address a field symbol that was previously reset using UNASSIGN or that pointed to a local field that no longer exist.
    -. You address a global function interface, although the respective function module is not active - that is, is not in the list of active calls. the list of active calls can be taken from this short dump.
    I think that it's for the unicode corversion because I've the last support package 12 installed and the rest of the process chain are running perfect.
    My hotmail mail is [email protected] if you need the screen shot.
    Regards and thanks a lot
    Jose

  • Parallel load of InfoProvider master Data

    Hi,  I have a Master Data object configured as an infoprovider.  I am trying to load the object from 2 different sources in parallel in my process chain.  This seemed to work in my dev environement, but one of the loads is failing because of master data lock. 
    There are no duplicate characteristics between the 2 sources so no conflicts exist there.  Is it just that I cannot load 2 sources into the master data infoprovider at the same time?
    ThankS!

    Hi Kenneth,
    On the following (parallel) processes lock situations can occur:
    - Hierarchy and attribute change runs is locking temporarily parts of a BW system
    - Loading master data for the same InfoObject (risk when loading in parallel master data out of several source systems)
    ( Can be avoided (if wanted) by applying note 421419)
    - Rolling up data of the same InfoCube
    - Selective deletion on InfoCube and parallel loading
    - Activation or deletion of ODS object data and loading it
    Best regards,
    Eugene

  • Company code field in cost center master data

    I am trying to create some cost centers, but noticed that the company code field is not available for entry in the cost center master data. In other words, the company code field does not appear or is hidden. My understanding is that an entry in company code field in cost center master data is mandatory. Can someone advice as to what setting is missing?

    Hi MG,
    Appearance of the field "Company Code" in cost center master data depends on the following point...
    In Controlling Area settings in OKKP, if you have opted for single company code, then, whatever the cost center you create under this controlling area is obviously belongs to that company code only. So, system will not display the filed "Company Code" in cost center master data.
    If you have opted for cross-company code controlling in OKKP settings, then, when you create a cost center in that controlling area, then the system will give the field "Company Code" in cost center master data so that in which company code you need to create the cost center.
    I hope u got it...
    Srikanth Munnaluri

  • Loading time-dependent master data using update rules/transformations

    Hi
    I am trying to load time-dependent master data to an infoobject. It seems that I get an error message on duplicate records if I use a transformation or update rule. Does this only work with direct update ?

    In the DTP you have the option to ignore duplicate records....
    Just select that and then load data...

  • What is the transaction code to change a service master ?

    Hi,
    can any one please tell me the  path or the transaction code to change a service master

    Hi
    Service Master Change T.Code AC03 , u select icon of swith between display and change mode or  Press Ctrl+F1.
    Please award points if it is usefull
    with regards
    vishnu

  • Company Code info in Business Partner Master Data

    Dear all,
    We are creating customer in CRM (5.0) system, which are flows down to back End ECC (6.0) system.
    now the requirement is company code and reconciliation details need to be maintained while creating customer master data, this info is a prerequisite to create sales orders in ECC and subsequent processes.
    We don't know how to maintain finance data in CRM Business Partner Master data.
    Please educate me how to maintain the required data, and what config need to done to solve our purpose.
    your suggestions will be highly appreciated.
    Thank you,
    Raghu ram.

    HI
    To my knowledge you cant maintain company code data in CRM, you can maintain general and sales area data from here and extend the company code data only in r/3.
    Regards,
    Karunakar.

Maybe you are looking for