Please suggest forum for me

can any final cut pro user direct me to a forum, anywhere on the web that i may find information on how i can convert a project created in final cut with .mov extension-file type, to play on a web site that only recognizes mpeg,mpg,avi,wma. I asked this question earlier and people were very curtious to give me suggestions, but nothing worked. I am wondering if i should find a file conversion forum. i am working with final cut pro 2 thank you.

The Compressor forum may help: http://discussions.apple.com/forum.jspa?forumID=999
But subquestion is correct; you'll need more specific information to get an accurate answer. I recommend contacting the web host's support to get the needed information.
WMA = Windows Media Audio
AVI = a container format which could contain any number of codecs
MPEG = could be MPEG-1, MPEG-2 or MPEG-4 or any of the variations of each
MPG = same as MPEG
-DH

Similar Messages

Please suggest Partition for following example urgent

Hi all
my table have one column Year
I need to create 2 partition year_1,year_2 for year column but synario is
If 2004 ,2005 2004 must go into year_2 and 2005 must go into year_1
also for 2006 must go into year_1 and 2005 into year_2
Please suggest type of partition if possible with example
Regards

> I need to create 2 partition year_1,year_2 for year column
<snipped>
An exceedingly bad idea to partition a date range like this - stuff some data into one partition and some other data into another partition, without any logical condition that governs what data must go into which partition.
So do not create just two partitions. Decide on the partitioning strategy you want based on criteria such as:
a) volume of data
b) access to data (i.e. predicates used)
c) data management requirements (e.g. removing or aging old data from the table)
Satyaki's example shows you the basics of how this should be done. A partition by year. Or, monthly or even daily partitions. And possibly even sub-partitions.
You will be achieving nothing in terms of performance or data management by trying to stuff date ranged data into two partitions as you are indicating.
As for future yearly partitions? Create yearly partitions for the next 10 years. Or 20 years. Or 100 years. They will be empty. Small space footprint. Ready to be used.
In this case there are relatively few (yearly) partitions - far less than having to deal with 1000's of daily partitions where it is often a better idea to automate adding of new partitions using a DBMS_JOB.

Please create forum for Oracle Communications Unified Communication Suite

Can someone please create a forum for the "Oracle Communications Unified Communication Suite"?
The equivalent forum on the forums.sun.com was quite helpful and active, so we would appreciate have the forum on the oracle forums as well.
King Regards

We will need the product manager to request this - if you know him/her, pass it along.

Please suggest solution for deletion of all rows in table at a time

Suggest me pl/sql code for a push button in form to delete entire rows in a table.
BEGIN
LOOP
DELETE
FROM mytable(say table name)
WHERE ROWNUM < 20000;
EXIT WHEN SQL%ROWCOUNT = 0;
COMMIT;
END LOOP;
END;
I wrote this code but not deleted .
Execute immediate truncate table <tablename>; this code too not working.
What my need is I dont want to put entire block fields in the form, just I want to put a push button and when I pressed it must delete all rows in a particular table.
That I want to delete all rows form builder runtime not by entering sql.8.0 and then there delete the rows.
thanks in advance
prasanth a.s.

to delete all records in a table, if you want to get good performance, then use:
FORMS_DDL('TRUNCATE TABLE your_table_name');
It is better than use DELETE FROM TABLE_NAME. But if you have condition in where clause, then you have to use DELETE FROM ...

HT201304 Any one has tried to connect I pad to LCD tv??? Please suggest way for same....

Can any one suggest how to connect iPad with LCD tv for see photos or using big screen...then iPad??
Can you suggest how can be connected??

Hi there. I connect mine to my TV with the apple HDMI adapter, and it works perfectly. great way to watch movies from itunes.

Please suggest solutiion for calling a plsql function in report

Hi,
I did a small project using forms and reports 6i. Now i prepared a repor that will calucalate the sum(expenditure)per report level. Now the problem is i want to print the sum which is in number form , in words. That is if the sum is 50000 then i want to print "fifty thousand". For this conversion from number to figure i wrote a small programme , which successfully compiled and created a function.
Now I want to create a field in the report and in which I want to call this plsql function and perform the number conversion of sum(expenditure)per report field. Please describe in detail how to make reference between these two fields i.e sum(expenditure)per report and field in which I want to run plsql code and thereby converting the sum into figures.
the programme i used to convert currency from number to words is please see link.http:/orafaq.com/scripts/cheqprint.txt
Thanks in advance
Prasanth a.s.

Hi,
If the amount does not exceed more than 5,373,484 then you can use the following method to print the number in words.
Test Db>Select to_char( to_date(5373484,'J'),'Jsp') from dual ;
TO_CHAR(TO_DATE(5373484,'J'),'JSP')
Five Million Three Hundred Seventy-Three Thousand Four Hundred Eighty-Four
There's no need to write DB function unless you are sure that the value can exceed 5373484.
You can do the following :
1. Create a Summary column on the report column on which you want the data summed - Report level or at any level required
2. Create a Formula Column - Report Level or any other level - Wherever required [ Same level as in Step 1]
3. The trigger text of this formula column would use the column which is summation of the Expenditure field column (Summary Column) and this function should return Varchar2
Declare
lSumInWords Varchar2(1000) := Null;
Begin
Select TO_CHAR(TO_DATE(:CS_1,'J'),'JSP')
Into lSumInWords
From dual;
Return (lSumInWords);
End;
3. In Your report layout, use this formula column for printing.
Good Luck.
-- Shailender Mehta --

Please suggest measures for tempdb.

Q1)
I am using express advance version of sqlserver 2008 r2, is there any limitation of temp db , why i am asking is because rowversion uses it heavely.
What i have seen is, transactional data read by this sanpshot isolation level transaction will be around 200 mb to 500 mb and it changes 10 to 50 mb of data. which will complet in few mints or seconds . but the stored proc will be running
continusally for 30 min to an hour ( it is sheduled on time basis ). and there is only one SP which will have snapshot isolation level transaction.
yours sincerely.

Hi,
10 G restriction exists for Tempdb data file and log file combined.I have not tested this but I am aware about this.
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers

Please suggest substitute for kensington trackball

Kensington has apparently abandoned their expert mouse trackball (4 programmable
keys and a ring surrounding a trackball) - it still works for Lion but you can't set
functions such as "print" and "save" so it is basically useless. Contacting them
is impossible - I've gotten 3 different answers.
What would you suggest that would have this functionality?

Before you give up on your Kensington trackball, have you tried their Trackball Works 1.1 driver?
http://www.kensington.com/kensington/us/us/s/1550/softwaredrivers.aspx
It works with Lion and gives you many of those types of commands; at least it does with the SlimBlade. I don't have the Expert Mouse any more to try.
Regards.

Please, suggest app for minutes control

I need an application por iphone 4 plus for minutes control
thanks for your suggest!!
Ricardo

Do you mean phone minutes? If so, you need to contact your carrier to see if they can apply any restrictions to the account. There is nothing available for the iPhone itself.
~Lyssa

Please suggest driver for microsoft lifecam studio for to work with live stream procaster

I have microsoft life cam studio using to broadcast live through live stream procastrer. I am using mac mini with mac os lion 64bit.But default driver for this studio cam is not supporting to go live with proper crop and quality settings. Can anyone provide driver for this camera ?

Hi, no idea really, but perhaps see if this could work for what you want...
http://www.google.com/url?q=http://www.bensoftware.com/securityspy/&sa=U&ei=QUGH T4z4K4WciQL436yGAw&ved=0CBEQFjAA&usg=AFQjCNEC9fzmWGOiPtM0kRHyzfST3Kh5jQ

Suggestion forums

Is there any suggestion forum for future development of Apple products?

'Fraid not. Not on Apple Discussions, at least. This is considered 'speculation' under the Terms of Use for this site, Section 1.1 here:
http://discussions.apple.com/help.jspa#terms
If you've got suggestions for product improvement, feel free to send them to Apple via the 'feedback' link here:
http://www.apple.com/contact/
But beware the Unsolicited Idea Submission policy:
http://www.apple.com/legal/policies/ideas.html

Hi,please suggest me some games for Compaq CQ62-105TU Laptop.Can I upgrade my laptop's graphics card

Hi,please suggest me some games for Compaq CQ62-105TU Laptop.Can I upgrade my laptop's graphics card

Unfortunately, you cannot upgrade the processor or graphics card on this laptop.
Here is a page from CPU-World that gives the specs for your processor:
http://www.cpu-world.com/CPUs/Bobcat/AMD-E%20Series%20E2-1800.html
You will see down near the bottom of the page that it is not upgradeable. Some laptops come with the processor soldered to the motherboard. Almost all laptop graphics are this way. The only way that you would be able to get a faster processor/better graphics for this laptop would be to purchase a brand new motherboard. You can do an Ebay search for 'HP G6 motherboard' to see what average prices are if you want to go this route.

Is there any way to create BHO.dll (Browser Helper Object) for Mozilla. I have created done this with IE7. I like to migrate this to Mozilla. Please suggest me

I have done a project to capture URL details and based on the data I need to do business process. I have implemented this project in Interner explorer using BHO (Browser Helper Object). I need to migrate this project to Mozilla. Please suggest me.

Firefox doesn't use BHO like IE.
For Firefox (and Google Chrome) you will have to create extensions to add extra features.
*https://developer.mozilla.org/en/Extensions
*https://developer.mozilla.org/en/Building_an_Extension

Hi, I recently upgraded my xcode to 5.1, my project is running well in ios 7.0,6.0, But in ios 7.1 i'm getting error like"iOS Simulator failed to install the application". Can anybody please suggest the solution for it.

My project is not running in ios 7.1 simulator i'm getting error like "iOS Simulator failed to install the application". Please suggest a solution for it.

We aren't Apple, just users like you. Have you tried a reset? Hold down the home button along with the sleep/wake button until the screen goes black and you see the Apple, then let go. (No data loss)

I am trying to export the combained PDF based on BOOK opetion using below scripts. but i am getting following error message "Invalid value for parameter 'to' of method 'exportFile'. Expected File, but received 1952403524". anyone knows, please suggest me

Dear ALL,
i am trying to export the combained PDF based on BOOK opetion using below scripts. but i am getting following error message "Invalid value for parameter 'to' of method 'exportFile'. Expected File, but received 1952403524". anyone knows, please suggest me solutions.
var myBookFileName ,myBookFileName_temp;
                if ( myFolder != null )
                        var myFiles = [];
                        var myAllFilesList = myFolder.getFiles("*.indd");
                        for (var f = 0; f < myAllFilesList.length; f++)
                                    var myFile = myAllFilesList[f];
                                    myFiles.push(myFile);
                        if ( myFiles.length > 0 )
                                    myBookFileName = myFolder + "/"+ myFolder.name + ".indb";
                                    myBookFileName_temp=myFolder.name ;
                                    myBookFile = new File( myBookFileName );
                                    myBook = app.books.add( myBookFile );
                                   myBook.automaticPagination = false;
                                    for ( i=0; i < myFiles.length; i++ )
                                               myBook.bookContents.add( myFiles[i] );
                                    var pdfFile =File(File(myFolder).fsName + "\\"+myBookFileName_temp+"_WEB.pdf");
                                    var bookComps = myBook.bookContents;
                                    if (bookComps.length === 1)
                                                   bookComps = [bookComps];
                                     var myPDFExportPreset = app.pdfExportPresets.item("AER6");
                                    app.activeBook.exportFile(ExportFormat.PDF_TYPE,File("D:\\AER\\WEBPDF.pdf"),false,myPDFEx portPreset,bookComps);
                                  //myBook.exportFile (ExportFormat.pdfType, pdfFile, false);
                                  //myBook.exportFile(pdfFile, false, pdfPref, bookComps);
                                    myBook.close(SaveOptions.yes);

Change the below line:
app.activeBook.exportFile(ExportFormat.PDF_TYPE,File("D:\\AER\\WEBPDF.pdf"),false,myPDFExp ortPreset,bookComps);
to
app.activeBook.exportFile(ExportFormat.PDF_TYPE,File("D:\\AER\\WEBPDF.pdf"),false,myPDFExp ortPreset);
Vandy

Please suggest forum for me

Similar Messages

Maybe you are looking for