Please suggest the fastest way to install Solaris x86 PC 30 boxes

I've already tested one and it's successfully installed.
I have to install 30 boxes , all are same spec.
Please advise the fastest procedure to install.
Note : There is no sparc machine.

Only problem with imaging a Solaris x86 box is that your machines will end up with the same hostid (which is pseudo-randomly generated at Solaris installation time for x86). This may, or may not, be a problem, depending on what commercial software you use...
To avoid this, you have to use jumpstart, or do some serious hacking.

Similar Messages

I want to install CCPL ,but it is not taking PAC file proxy.So please suggest an alternate way to set proxy for this exe file..

I want to install CCPL ,but it is not taking PAC file proxy.So please suggest an alternate way to set proxy for this exe file..

That file might have moved to a different location on the server. I think you'll need to check with RefWorks support or your local IT department on why the install page links do not work.

Can anybody please suggest the way i can get all the indexes on a cache

Can anybody please suggest the way i can get all the indexes on a cache?

Hi,
If you want to just see what there is at the moment, the StorageManager mbean IndexInfo attribute shows the toString() representation of the extractor of each index.
If you want to get it programmatically, you can get hold of it by sending an entry-processor to a key, then casting the entry to BinaryEntry, and calling BinaryEntry.getBackingMapContext().getIndexMap() to get the same Map<ValueExtractor,MapIndex> of indexes which the index aware filters get.
Best regards,
Rob

What's the fastest way to share files live between 2 Macs in the same room?

Please can I have some advice on this scenario?
I'll need to share HD video footage between 2 new Mac Pros in the same room. 1 Mac will be used to upload the footage and the other to edit it using FCP. The footage can be stored either on hard drives in the edit machine or on desktop hard drives connected to the edit machine (or if there is a better option I'm open to advice).
What is the fastest way of sharing the files and what is the simplest way?
Any suggestions would be greatly appreciated.
Thanks in advance

What is the fastest way of sharing the files and what is the simplest way?
Fastest way? a fiber channel SAN connecting the two machines to a common fiber-channel based storage array. Can't beat it for performance, but it comes at a cost (think $20K as a starting point, depending on the amount of storage you need).
Simplest way? Some external media (thumb drive, external hard drive, etc.) that you shuffle between the two machines
Intermediate: a NAS-based storage box on your network, although be aware that real-time editing of HD video can overwhelm many low-end NAS boxes.

What is the best way to install snapdrive to many hosts?

Hi all, Next weekend, I planed to install snapdrive to over 160 hosts. So what is the best way to install snapdrive? Over 160 UCS hots! I found "remote install" in snapmanager for Hyper-v. This is useful for me? Please let me know easy way to install snapdrive to so many hosts. Thank you.

The current generation of SnapDrive does not support remote installing to multiple hosts.What you saw about HyperV is simply limited to the HyperV host, so it's not remote to multiple hosts across the network.Since SnapDrive has a command line to install, you CAN however script the remote installation.I suggest you find out the exact installation command which works for your environment and use a program like psexec to remotely execute the installation command against multiple targeted servers.If you need help with the script, NetApp Professional Service can be engaged and can even come on site and do it for you, if needed. hope that helps,Domenico

Please suggest the URL to display JSP report

Hi Experts,
Last week, we tried to change the memory of Response Cache and buffer Cache to increase the speed of the Excel report. But it didn’t work out.
And from the below link, I understood we can convert the oracle 9i report to excel by converting the Oracle 9i report to JSP report.
http://www.oracle.com/technology/products/reports/htdocs/getstart/demonstrations/index.html
I’ve converted the Oracle 9i report to JSP report and finding the way to display the JSP report using Application Server. I am trying to find out the REPORT URL of simple JSP report and using Reports Servlet . Right now I am trying the below steps to display the JSP report in Application Server.
Please suggest the URL for displaying the JSP report
Thanks & Regards

Please explain how any of this relates to the topic of this forum: "Database Upgrade."
If you repost your question in the correct forum, or perhaps with the correct company, will be more likely to find the help you need. For example ... what App Server (make and model).
Thank you?

Please suggest the best book or materila to learn EP Developement

Please suggest the best book for learning Enterprise Portal developement in SAP ? Which one is good in between below.
1. SAP® NetWeaver Portal Technology: The Complete Reference by Rabi Jay ( How is this book in EP ?)
2. SAP Authorization System: Design and Implementation of Authorization concepts for SAP R/3 and SAP Enterprise Portals by IBM Business Consulting (sap press book).
Regards
Badari

Hi,
For Content Developments you can refer below links
LINKS FOR BEGINNER:
Beginning EP Development
Oliver's favorite SDN link collection
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/387daf90-0201-0010-bb98-cb1a5545bf69
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/webcontent/uuid/4b0c105e-0501-0010-bcb0-92478a4b2a17
Overview of the Content Development Process
Overview of the Content Development Process
Java development methodologies (Part I)
Java development methodologies (Part I)
Java development methodologies (Part II)
Java development methodologies (Part II)
Setting up the NetWeaver development environment (Part II)
Setting up the NetWeaver development environment (Part II)
Installing and configuring the preview edition of EP
Installing and configuring the preview edition of EP
Top Weblogs of All Time [19 to 14]
Top Weblogs of All Time [19 to 14]
Enterprise Portal Implementation Forum
Enterprise Portal Implementation Forum
Beginning EP Development
http://help.sap.com/saphelp_nw04/helpdata/en/a4/76bd3b57743b09e10000000a11402f/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/1d/40e93bac3c5a6de10000000a114084/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/50/da644160087d47e10000000a1550b0/frameset.htm
Have a look at the following threads to have an introduction to portal:
Hi
What is EP ??
For kick start in portal, the following Wiki link is enough:
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/ep/introduction%2bto%2bportal
You can now see the following threads which already have similar question discussed, you will get lots of links in these threads:
Start with EP
e-Books on EP
Portal Development
Portal 7.0 Documentation
Beginner to EP
Thanks
Santosh

What is the correct way to install Leopard?

It seems like everytime I upgrade to a new OS, I end up screwing something up. I am borderline thinking about taking my laptop up to the apple store and having them install Leopard for me. Last week in another thread someone posted something saying I should backup my home directory? and save it to my external drive then install leopard and then drag that home directory back over. This was said to be a work around instead of using Archive and Install. I guess I could do that but are there other suggestions out there?
I just don't want to happen what happened when I installed Leopard on my desktop. I had about 4 libraries of stuff and another folder that was marked Previous system and that had a bunch of files and then I had the home directory for the old system! The bottom line I had a lot of stuff that I ended up deleting which freed up my hard drive space significantly.
I would like to make the install on my Macbook Pro clean, simple and painless as possible!
Thanks!
Oh yea if I decide to back up the home directory. Do I just drag the little house icon over to my external drive? If so, once Leopard is installed, do I drag it back to the same location I took it from?

If you don't mind reinstalling all your applications, backup your home folder to an external, boot off your Leopard Disk and go to Disk Utility. Erase your hard drive and format HFS+. Than do an Erase & Install. After that is complete, restart. Once you go through the setup procedures, perform all the software updates until they are all installed. Now move your Home Directory back. Finally, start reinstalling your applications. This will give you a brand new Leopard system that should work fine.
First however, make a bootable clone of your HD to an external drive for backup. You need to erase the drive and format to HFS+ with a GUID partition table. Use Carbon Copy Cloner to make the clone.
To back up the home folder, yes, drag the little house icon to an external, but with the bootable clone, this isn't really neccesary.
This isn't the easiest way to install Leopard, but it gives you the best chance of having no issues.

Is there the third way to install application onto iPhone device ?

Hi guys,
It seems there are 2 ways to install application onto iPhone now,right?
The first method is download it from App store/ Ad hoc after application distribution.
The other way is that tie the iPhone device UDID to App ID of iPhone developer, then download and add the available Development Provisioning Profiles onto iphone,then build and debug application using connected iphone device in the Xcode.
I want to know wether there is the third way to install application onto iPhone device?
Sf so,anybody can tell me how to do ? or give me some suggestion?
thanks!

The other ways would envolve jailbreaking the phone which cannot be discussed on these forums.

What is the fastest way to transfer files and applications from an older iMac to a new MacBook Pro?

What is the fastest way to transfer files and applications from an older iMac to a new MacBook Pro?
I have a Firewire cable and Thunderbolt adapter, but no icons showing either Mac appear on either desktop.

The fastest way is to use Carbon Copy Cloner and a external drive formatted GUID OS X Ext. J in Disk Utlilty, then connecting to the new Mac and using Migration Assistant in the Utilites folder.
Even faster, if you can determine your going to replace all the apps from fresh sources anyway (like if the older Mac's OS X verison is old thus the apps) then just use a external drive and copy just your files to it, then connect to the new Mac and transfer over.
Some apps you can just grab the registration code and install it fresh on the new machine with the old code, talk to the developer about transfering the program, as long as it's deleted on the older Mac in the process.
It used to be Firewire Target disk mode was fastest, but since Thunderbolt came out...
Notice this support doc hasn't been updated since june 2012, no Thunderbolt info
https://support.apple.com/kb/HT1661

IMovie: whats the fastest way to import and save all original media?

Good afternoon. Ok I need help please. Is there a way to simply take all the imported original media and just save it all in one fell swoop? Rather than having to import and then process/export clip by clip.
I thought I had a quicker way just grabbing all the original media from the imported camera (right clicking imovie library > show package contents > original media) untill I tried to play one of the original media files - no sound and it was mov file. I assume mp4 is better???
I have 2800 hours of video I need to import off my camera. I don't need to modify them at all, aside from the occasional combining of clips into one movie. So I need the fastest way. Importing and then exporting clip by clip will take me forever. I would prefer to just import and then just drag all 50 clips or so into my movies folder. But as stated above that does not seem to work as expected unless I'm missing a step.
Thank you!

ps Can I take the original media files (mov format) and batch convert them using handbrake or MPEG streamclip? And if so would the resulting videos then have sound? And which is the best format (container codec whatever) to export them to? Thanks!

What's the standard way to install 3rd party classes?

Hello,
Let's say I install my SDK in c:\jdk1.3_02.
Could anyone tell me the standard way to install 3rd party classes or sources so that I can import them in my source codes please? Thank you so much!

most of the projects I've seem organize source, binaries etc. in the following directory structure:
lib - external libraries
src - the actual source code
conf - configuration files
dist - created distributables
let's say you have everything in the d:\projects\myproject directory.
-> compile with
javac -classpath d:\projects\myproject\src
-> run classes with
java -classpath d:\projects\myproject\src

HT4623 How can I update my iphone 4 from iOS 5.1.1 to iOS 6.1.4 only. I am not looking for iOS 7 right now. Please suggest the update process?

Hi Team,
I have iphone4 16GB with iOS 5.1.1. While using the phone, few times the phone is automatically going to shutdown and getting call disconnected. Some times, it happens more frequently in a day, sometimes not.
and also, How can I update my iphone 4 from iOS 5.1.1 to iOS 6.1.4 only. I am not looking for iOS 7 right now. Please suggest the update process?

You cannot. You can only upgrade to the currently supported version of the iOS which, at this time is iOS 7.0.2.

HT1364 I just bought a new PC and now have ample space on my C drive to house my music Library which is currenlty installed on a external drive. What is the best way to install and move the itunes library to my C Drive?

I just bought a new PC and now have ample space on my C drive to house my music Library which is currenlty installed on a external drive. What is the best way to install and move the itunes library to my C Drive?

If the entire library is on the external drive then simply copy the iTunes folder into <User's Music> on the new computer, then install iTunes. If you've already installed iTunes you will want to remove the empty iTunes folder in <User's Music> first.
If it turns out you only have the media folder on the external drive then take a look at this post...
tt2

What is the fastest way of getting data?

With a scanning electron microscope, I need to scan a 512*512 pixel area with a pixel repetition of 15000 (two channels), meaning averaging over 15000 measurements. Simultaneously I have to adjust the voltage output for every pixel.
I am using a 6111E Multifunction I/O board in a 800MHz P3. The whole task has do be done as fast as possible (not more than 20 minutes altogether).
What is the fastest way to get this huge amount of data with averaging and output in between? (E.g. do I use buffered read with hardware triggering or is there a faster way?)

Using the NI-DAQ API (not LabView) will give you a significant amount of more control over what happens and when to the data stream; which translates to a more efficient program. But you need to program in C/C++ or Delphi then. The Measurement Studio provides ActiveX controls that are like the LabView ones for C&C++ (they�re slow like the LabView ones though � not a lot you can do about the Windows GDI).
What are you trying to sample 15000 times? The 512*512 pixel field?
That�s almost 15Gigs of data! And it means you need to process data at 12.8MB/s to finish it in 20 minutes. I hope you know C, x86 assembly and MMX.
I would setup a huge circular buffer (NI-DAQ calls them �double buffers�), about 30 seconds worth or so, to use with SCAN_Start. Then I would proces
s the actual buffer the card is DMA�ing the data into with a high priority thread. Progressively sum the scan values from the 16bit buffer (the samples are only 12 bit, but the buffer should still be 16bits wide) into a secondary buffer of DWORDs the size of the screen (512*512), and you�ll need two of those, one for each channel. Once the 15000 scans are complete, convert each entry into a float divide by 15000.0f, and store it in a third buffer of floats.
If you wish to contract this out, send me an email at [email protected]

Please suggest the fastest way to install Solaris x86 PC 30 boxes

Similar Messages

Maybe you are looking for