Please, suggestion about final cut x, dvd studio pro, sound track and color

what to do now, final cut studio cannot exist in same partition of fc x, but at same time fcx does not have anymore dvd studio pro, color and soundtrack, is it replacing the 3 programs? are you really satisfied of it?

Try building the project to your desktop and then open the Video_TS in the Mac DVD player application.
How does it play/sound? This application is the best way to see and hear how your burned DVD should play vs. just using simulator and burning.
Just to clarify- are you taking your FC QT file into Compressor and creating a MPG-2 and AC3 file or are you bringing your FC QT directly into DSP?
What codec are you exporting from FC? ProRes422, DV, H264?
Open the FC QT in QT and apple+I to see this.
What does it say for audio?

Similar Messages

Major Problem with audio from Final Cut to DVd Studio Pro

I am posting this problem again because no further responses have been received regarding my first post. I purchased an MR-HD100 Firestore device from Focus Enhancements. When I use clips from it alone or with other clips created by digitizing from min DV tape on a sequence or timeline the audio works fine in Final Cut. When I import any type of file and believe me I have been trying all kinds of suggestions and wasting almost a dozen DVDs. Whether it be a Final Cut QT file, going straight to compressor and producing an MPEG-2 file and a dolby audio file .ac3 importing them into DVD SP and making the adjustments that MR. Harbsmeier suggested DIAL NORM at -31dbfs and COMPRESSION MODE to NONE, as well as the suggestion to make an aif file with the audio and importing it into DVD SP as well as the video. I get the same result with every try, the clips made with the firestore are so low you cannot hear them. NOTHING WORKS!!!!. And yes I have tried making a DVD with just digitized footage and yes it turned out fine. I called Apple support today and that gentlemen basically told me I am out of warranty so phone help was not available. However, he made a suggestion of changing sequence presets in Final Cut which has now developed into another problem. I have messed up my settings so bad I don't know where I am I can't LOG & CAPTURE in the manner I used to ???? Could someone please advise as to why this problem exists and the correction to resolve it. I do not understand why the audio works fine playing the sequence on the timeline in Final Cut. It plays fine after making a Final Cut QT file. AND it plays fine in simulation mode in DVD Studio Pro. However after you burn a DVD the audio from the firestore clips are not to be heard unless you crank up the speakers or TV to it's maximum level and you can barely make it out. PLEASE PLEASE PLEASE HELP ME Projects are stacking up and was really hoping to go tapeless

Try building the project to your desktop and then open the Video_TS in the Mac DVD player application.
How does it play/sound? This application is the best way to see and hear how your burned DVD should play vs. just using simulator and burning.
Just to clarify- are you taking your FC QT file into Compressor and creating a MPG-2 and AC3 file or are you bringing your FC QT directly into DSP?
What codec are you exporting from FC? ProRes422, DV, H264?
Open the FC QT in QT and apple+I to see this.
What does it say for audio?

Aperture and other Pro Applications ( Final Cut, Motion, DVD Studio Pro )

Hi folks,
I have bought Final Cut Studio a while back, and have been working with all the tools for a while now ( FCP, Motion and DVD Studio Pro ). Recently I also switched to Aperture to manage / capture / organise my digital photographs ( previously I used iPhoto ).
Now I was wondering how I could use the pictures from my Aperture library in Motion or DVD Studio Pro. When I look at the file Browser, I can easily use some iPhoto pictures, but apparently I can't seem to find anything for Aperture.
What I would like to do is use some pictures from Aperture in a Motion project and also include an Aperture album in DVD Studio as a SlideShow.
What would be the best way to do this ? Do I have to export the pictures I want to use ? Or am I missing something ?
Regards,
Stefaan

Stefaan,
Unfortunately, that type of integration between the Pro Apps is not there (yet). It would definitely be a nice feature to have. We should all send feedback to Apple asking for this feature. For now, you will need to export photos for use in these other apps.
Along the same lines, I would also like to see integration with Aperture and the "iLife" programs. Since Aperture will likely replace iPhoto for at least some of us, it would be nice to be able to use Aperture photos in these apps as well.
--Joe

How to import subtitles made with Final Cut in DVD studio Pro?

Hello!
I made subtitles for a movie directly on a track of my final cut timeline. How can I import now this into DVD studio pro to make an independant subtitle track?
thank you.

DVD Studio Pro can work with STL subtitle files. they are nothing more spectacular than a plain text file.
There's a ton of information in DVDSP's online manual, under the Help menu bar item.
search that pdf for "Creating an STL Format Subtitle File".
This file can be configured to display when the user wants to see it or made permanent with the "Force Display" option.
If you export your FCP Timeline the subtitles on it will be burned into the video permanently.

Provide Feedback for the DVD Studio Pro User Manual and Onscreen Help Here

The Apple documentation team for professional video applications would like to know what you think about the DVD Studio Pro 4 Help documentation (available in the Help menu):
• How often do you use the DVD Studio Pro Help documentation? Under what circumstances do you use it most?
• How do you find what you're looking for in DVD Studio Pro Help? For example: table of contents, index, skimming, PDF links, PDF search?
• What do you like most about DVD Studio Pro Help?
• What is missing?
• Are there any particular examples of other manuals or documentation that you consider to be good models for future editions of the DVD Studio Pro User Manual and onscreen help?
• By what method do you usually learn a new application? For example: provided tutorials and manuals, third-party tutorials or books, training classes?
• What do you think is the most difficult feature/concept to grasp in DVD Studio Pro?
• What's the most frustrating experience you've had with the DVD Studio Pro Help documentation?
• Do you prefer electronic or print documentation?
• Are there any other delivery methods or media you think we should explore?
• What size computer display do you typically use to view the onscreen help? For example: 15-inch, 17-inch, 20-inch, 23-inch, or 30-inch?
• What resolution is the computer display set to when you view onscreen help? For example: 1024 x 768, 1280 x 854, or 1920 x 1200 pixels?
• Do you use multiple computer displays?

• How often do you use the DVD Studio Pro Help
documentation? Under what circumstances do you use it
most?
I'm working with DVSP for 4 months, so everytime I don't know how to do something I use the documentation. As the times passes I almost don't need it so often.
• How do you find what you're looking for in DVD
Studio Pro Help? For example: table of contents,
index, skimming, PDF links, PDF search?
PDF Search, but I think is not the best way to search because it shows too much useless results.
• What do you like most about DVD Studio Pro Help?
It is powerful and easy to use.
• What is missing?
A way of editing the DVD Project Source Code. Let me explain: in some big projects I just need to change the Jump from "button_1" to "button_2", and to do that I need to find the button under my menus and choose it from a list. If I can just type "2" instead of "1" it will be faster and error-free.
Advancing in this idea, if I can open the entire link list as a Source Code in TextEdit, I can see all the buttons and link all of them without seeking for each on menus.
Today the Connections Tab helps a lot, but I still need to find the button un the menus. With 5 or 4 menus is easy, but sometimes I have 50...
• Are there any particular examples of other manuals
or documentation that you consider to be good models
for future editions of the DVD Studio Pro User Manual
and onscreen help?
The OSX help is great!
• By what method do you usually learn a new
application? For example: provided tutorials and
manuals, third-party tutorials or books, training
classes?
Manuals, third-party tutorials and discussions foruns.
• What do you think is the most difficult
feature/concept to grasp in DVD Studio Pro?
• What's the most frustrating experience you've had
with the DVD Studio Pro Help documentation?
Using scripts. It could be better with a lot of examples. "To do that, try this one".
• Do you prefer electronic or print documentation?
In electronic is easy to find things.
• Are there any other delivery methods or media you
think we should explore?
• What size computer display do you typically use to
view the onscreen help? For example: 15-inch,
17-inch, 20-inch, 23-inch, or 30-inch?
I use AppleCinema 20
• What resolution is the computer display set to when
you view onscreen help? For example: 1024 x 768, 1280
x 854, or 1920 x 1200 pixels?
1650x1050
• Do you use multiple computer displays?
No.

Dvd Studio Pro on formats and wont burn.

I created a menu on dvd studio pro and when I try to burn it, it only goes through the process of Formatting and it finishes. I cant play it on any dvd player, I'm pretty sure thats because its only formatted and not burnt. I cant seem to get it to burn. Any suggestions?

Wikileak:
It works even though it doesn't work.
While the display of colors in the pop-up menu is broken under Mac OS X 10.9, the palette is still there and works for setting colors. Choosing the first blank spot in the Color pop-up menu sets that first color in the palette, choosing the second blank spot on the Color pop-up menu sets the second color in the in the palette, etc. Of course, this was sooooo much easier when the Color pop-up menu displayed color swatches as expected.
If you click the "Edit Palette" button at the bottom, the colors in the Edit Palette dialog box from left to right correspond to the Color pop-up menu from top to bottom. So, the color in row one, column one of the Edit Palette dialog will be the first blank in the Color pop-up list. The color in the row one, column two will be the second color in the pop-up list and so forth.
I set the colors for a title in the Edit Palette and take a screen shot, then reference that while using the Color pop-up menu.
If your machine will boot 10.7.5, an alternative is to create a startup volume just for setting the colors and switch to 10.9.5 for finishing the disc.
-Warren

Re DVD Studio Pro 4: help with color saturation

Re DVD Studio Pro 4: having trouble with the color saturation on the text of menu buttons. been using the same method for years, checked opacity of colors. All of a sudden, the text color is splotchy and looks unprofessional. Clients are complaining and I do not blame them. Any help?

This issue isn't external drives, it's the mini, and installing the program.
http://www.apple.com/finalcutstudio/dvdstudiopro/specs.html
The specs do not seem to require an internal superdrive.

DVD Studio Pro--Formatting Failed, and failed, and failed, and failed

HI!! I've experienced my first HD crash and the only files I have left of several pieces are the m2v and aiff files that were generated by Compressor for use w/DVD StudioPro. Now that the HD is gone(and this would happen before, even when the HD wasn't connected to the computer, which I never understood, as I thought that the output of Compressor were stand alone files) anyway, now that the hard drive is gone, DVD studio pro will not format for a burn.
Once the Initialize screen appears, I get an error box stateing:
Formatting failed Building not successful, see log.
the log reads:
Starting DVD Build QUICK_REEL...
Compiler File Error
Build cancelled
Formatting finished.
Building was not successful. See log.
I'm freakin out because these are the only copies left. Nor am I able to export a stable format of the m2v, for instance converting to mpg so that I can make masters.
HELP!~!
Dave O'
[email protected]

Hi Dave,
So from what I understand the only change is the new hard drive? What I would do while the project is closed delete all the PAR folders associated with the project and reopen the project. This should highlight any errors concerning finding the footage.
My other note is have you changed the type of drive attached to your computer? Some external drives don't work so well with DVDSP. Moving the assest on board your computer is one way to skin this cat.
Good Luck

DVD Studio Pro/MPEG Streamclip and PAL

Hello All:
I'm trying to convert several PAL DVDs to NTSC. I'm using MPEG Streamclip to convert the PAL VIDEO_TS folders. Then I'm compiling them on Studio Pro.
My Streamclip settings are as follows:
Export to Other Formats>
Quicktime>
DV/DVCPRO NTSC>
Best>
29.97>
16:9>
740 x 480>
48KHz/16bit
I'm getting a lot of artifacting (picture shifts during pans, jagged edges (interlacing?), etc.)
They don't look bad on my computer monitors in either app, but of course a burned DVD playing on a real-world Sony broadcast monitor tells a much different story.
Does anyone have any setting(s) suggestions to smooth over these problems?
Thanks!!

First off, thanks to everyone for all your great suggestions.
Agreed that the material was compressed to begin with. (Begin rant)...I'm amazed that so many people have a finished DVD they've spent hundreds on, yet apparently have no access to source material or even assets. No matter how I try to explain why the finished product won't look as good as what they gave me, the response is "it's DVD--DVD always looks great. Why can't you make it look great?" (end of rant, thanks...)
I'm on a PPC running Final Cut Studio 1 (so ProRes is unavailable to me). I took the footage to another system (Intel dual-core running FCS 3), used ProResLT, and to tell you the truth, I didn't see any noticeable difference--fade ups/downs are jerky, jagged lines between light & dark areas, etc. I'm also playing them back on both Sony and JVC broadcast monitors. I did some research on past threads, and downloaded and used JES Deinterlacer--no change. Even untrained eyes notice the problems.
I guess I was looking for someone who had had the same issue, and had a silver bullet to share with me. I've been on this for two days now, and my options are drying up. If I do succeed, somehow, I'll report back on what I did.
Thanks again.

Help with DVD Studio Pro Audio Track/Commentary Track

Hi Everyone -
I am authoring my first DVD for a film. I believe I have everything under control - menus, chapter selections, bonus features - except for the director's commentary.
I have created 2 main menus - one with a button to turn commentary on, another menu with a button to turn commentary off.
They work fine.
But when I simulate the DVD, select commentary ON, play movie (commentary track plays) ... Then click the MENU button, it returns to the main menu with the button to turn commentary ON, but the commentary audio track (audio track 2) is still activated at this point.
Is it possible to tell it to return to audio track 1 if the menu button is pressed, or tell it to go to "main menu 2" if the menu button is pressed?
I hope my question is clear.
Thank you.
Joe G.
Houston TX

Each track and story has its own end jump and its own Remote Control selection. If I understand your problem correctly, changing the Remote Control>Menu (in the Inspector window) from Same as Disk to the appropriate Menu should fix the problem.
If not, a more complete explanation would help.

DVD studio PRO - lost "track"

Deleted box "TRACK" near the box "MENU1" (see pic.) in Grafical tab, plz, how to get it back?

Undo (Command + Z) helps on one step but I get such a picture on a NEW project.
"Add Track" button you see above, creates new track but doesn't show it in grafical TAB.
Outline view is good alternative but i'd like to clear out how to return "TRACK" box in grafical mode. It should be easy but funny I can't find it.

Final cut pro x/DVD studio pro

A need an advice, I been using Final cut pro to edit my professional wedding videos and DVD studio pro to burn and make menus, can anyone recommend me another professional software to to create menus and burn DVD, my mac has an dvd drive built in, if I buy an external DVD burner drive, would I get better quality (on standard DVD's)

I don't know why you want to change because Studio Pro is about the best software available.
An external burner will have no effect on the quality of the DVDs.
If you burn large numbers of DVDs an external burner might save wear and tear on your built in one.

Final Cut Sequence to Compressor to DVD Studio Pro

Running latest FCP Studio apps. Have a sequence fully edited and mixed (via Soundtrack) and sent the file to Compressor for output to DVD Studio Pro to create the DVD. I used the H.264 for DVDPro compression template (H.264 for DVDPro - 120 min) setting as provided by Apple. The compression file worked like a charm. I have the file and it plays beautifully in QT player. However when I try to add the asset or import it into DVDStudio Pro it says it is in an incompatible format. What gives? Shouldn't the template know how to render/compress the movie if the template setting is supposed to be in DVDStudio Pro format? Scratching my head on this one. Any pointers would be of great help.
File particulars: 3 1/2 minute movie (film student project) that was sent to compressor as a sequence file. Encoder template is set up for MPeg2 format using 7.34Mbps Average Bit Rate/23.00Mbps for Maximum Bit Rate/2.0 seconds for Frame Sync and Multi-pass and Include PCM Audio are checked (all are the default settings as provided by Apple).
Message was edited by: William Lutes

That would be a reasonable except that when I used those preset settings the file was unplayable by Quicktime OR DVDSP. QTPlayer wouldn't play it (as it was unrecognized file format) and DVDSP wouldn't import it. So I am at a loss on how to use compressor with the DVD setting templates. All I need is to compress the 3.5 minute movie file in a format that DVD Studio Pro will import and allow me to build and press to a DVD for family members to watch. I should add that I exported (via the Quicktime option in FCP) a movie file and then brought it into DVDSP but when I built the DVD it encoded the movie file in a very weird way (strange flicker when close up shots played on screen). When I just tried to change the encoding settings (in DVDSP) to allow for the least amount of effect on my file (basically the movie is only around 500mb uncompressed so a 4.7 blank dvd has more than enough room) DVDSP encoding still encoded the file in the strange flickering artifact manner.
The project is basically a simple menu with two options one to view the 3.5 minute movie file and the second is a 5 min behind the scenes explanation of the project by the director. All together the project file in DVDStudio Pro is around 650mb. So, the question now becomes: should I be bothering with Compressor at all and if I eschew its use then what can I do in DVDStudio Pro's encoding to have the least effect on the movie file (which plays fine without any flickering artifact before DVDSP gets its hands on it to build the DVD).
Any ideas? Thanks for chiming in btw, I do appreciate it.

Final cut studio fcp 4.5 dvd studio pro 3 cinema tools 3

will the apple production suite work with an imac g5 power pc ox tiger 10.4.8 with quicktimepro 7.1.3 using an AGP graphics card. will this version work on my computer. production suite comes with fcp 4.5 dvd studio pro 3 applemotion and cinema tools 3. will this work on my computer or do i need another version of this to work

anybody care to answer this one? Anybody? Somebody? Nobody?

DVD Studio Pro won't burn - HELP please

I have DVD Studio Pro 4.0 and I've exported a sequence from FCE 4.0. I've set my preferences (HD), imported the sequence (or asset) and then I selected burn - "Format Successful" comes up and nothing else happens. Am I doing something wrong? I know it works because I've done it before.

Are you trying to build an HD DVD rather than a standard defintion DVD? I've never tried to build an HD DVD... does that format also use the VIDEO_TS structure?
A simple alternative to finding and removing the troublesome VIDEO_TS folder is to select a new location for the build -- an empty folder on your desktop, in your documents folder, wherever.
Or, if the contents and/or design of the disc hasn't changed since the last time you built it, find the current VIDEO_TS folder and use that to burn your disc rather than building it anew.

Please, suggestion about final cut x, dvd studio pro, sound track and color

Similar Messages

Maybe you are looking for