Please take a quick InDesign survey

Please take the following surveys about page numbering in InDesign. Pretty please? Your doing so will help us to learn what people are having trouble with and how we can make it better.
Click here to take the survey

Tanks,
Very helpful example.
However...
When I started to build my program I used the "multiple channels" DAQmx read block, And configured a voltage task that I used for all my sensors. To scale the measured signal into correct value (in for example Newton to show on the screen) a number of calculations were applied, depending on selected sensor.
This means that I have to do the calibration of the sensors outside of Labview. Until I found the possibility to calibrate each task (individually) in MAX... This is much easier because I don't have to bother about all the calibration values and compensations that I used before. This is the reason why I want to give each sensor its own task. And when each sensor is given its own task, and I always need to measure two sensors (two channels), this problem arise.
I can se 2 possible solutions... maybe.
1. Create a scale in MAX for each sensor instead, then I should be able to use the example in the link above -- think this would work, but I need to find the slope and offset value on my own as before.
2. If there is a way to read from global viritual channels instead of tasks, and if it is possible to connect 2 viritual channels independent to he task during operation -- Probably not.
Maybe a little confuising explanation...

Similar Messages

Please take a quick look at this: Midi Problem with Logic 8.0.2

Hello, I am trying to connect up my Roland FP3 Keyboard with Logic 8.0.2. I am using the following MIDI IN/OUT to USB device:
MUSIC STORE Midi Port 1x1 USB
http://www.musicstore.de/de_DE/EUR/-/art-PCM0006795-000
In the Audio Midi Setup in Mac OS X 10.5.5, the Midi device calls itself WORLDE MIDI PORT and is automatically recognized. However, when I click on "Test Setup", nothing happens. This is not the first time that i have setup such a device and i recall that with other MIDI-USB devices that the computer plays some kind of sound to confirm that the MIDI-USB device is working.
More importantly, when i open up Logic 8.0.2, the transport bar displays "No In", "No Out". This is very confusing seeing as that the device is recognized in the Audio/Midi Setup. It is unlikely that the device is broken, because I've now gone back to the store where i bought it and replaced the first device with an identical second device - and am now having the same problem. The staff at this music store say that the Midi-USB device should automatically display, for example, C-sharp 4, in the transport bar without any additional tinkering. I have a feeling though that there is some kind of button that i have not pressed (or HAVE pressed that i shouldn't have pressed) and as a result can't play music in from my keyboard into my computer.
I really appreciate anyone who takes the time to give me a helpful pointer here. As you can imagine this is quite frustrating. Thank you very much in advance!
Peter

peterland1 wrote:
More importantly, when i open up Logic 8.0.2, the transport bar displays "No In", "No Out". This is very confusing seeing as that the device is recognized in the Audio/Midi Setup.
"No in No out" simply means there is no MIDI coming in or going out +at that moment+. If you strike keys and move controllers and it still says no in no out, then you may have a problem. Is that the case? Have you actually touched the keys...?
regards, Erik.

Please take Adobe's quick NLE User Survey

Please take our NLE User Survey – you could win $100 AMEX Gift Card.
We want to hear from you!
Adobe is seeking your input to help design the best products for post-production workflows, and we greatly value your input as we develop our video applications. Please fill out our quick 10-12 minute survey, and as a thank you, you will be entered to win a $100 gift card!
Go to survey >
http://www.surveymonkey.com/s.aspx?sm=Nk7Cf7W1D_2fMncDvby4hvXw_3d_3d
thank you,
Anita Engelman
(Premiere Pro Marketing Manager)

If you have not done so already... go take this survey
I did... and every place in the survey where there was a block for text entry, I typed in
Windows 7 Compatibility
Tell Adobe NOW so they know you care about the next operating system!

Please take Adobe's quick post-production survey

Please take our post-production survey – you could win $100 AMEX Gift Card.
We want to hear from you!
Adobe is seeking your input to help design the best products for post-production workflows, and we greatly value your input as we develop our video applications. Please fill out our quick 10-12 minute survey, and as a thank you, you will be entered to win a $100 gift card!
Go to survey >
http://www.surveymonkey.com/s.aspx?sm=Nk7Cf7W1D_2fMncDvby4hvXw_3d_3d
thank you,
Anita Engelman
(Premiere Pro Marketing Manager)

If you have not done so already... go take this survey
I did... and every place in the survey where there was a block for text entry, I typed in
Windows 7 Compatibility
Tell Adobe NOW so they know you care about the next operating system!

Please take this short survey - Inputs on View Designer

Inputs in View Designer :-
Hello Webdynpro developers,
We would really like to get some input from you, please take a short minute and answer just a couple of questions in our little <a href="http://feedback.sap.com/efs/vote?campaign=c14e041f65f804c900f008f7734bd1c5&org=997">survey</a>
Your inputs are highly appreciated.
Thanks,
Raghuvira

Hi Raghuvira,
Its really good to start this thread, so that we could specify the possible enhancements and improvements on View Designer from Design time perspective .
I personally believe replying to the post is more easire than taking the survey so instead of survey here is my reply ,
1. I many a time faced a problem of getting an exception of Object not found while working in developer studio on View Designer
2. If we get a design time preview it would be even helpful as even changing a small text requires deployment
3. All the actions on the UI elements has to be triggered from outline and could not be done from the main View designer
4. Shifting a UI element to adjust its position is very painful ( up/down)
Currently i have these in my mind , will let you know if i get some more
Thanks
Dhawal

Please take a survey about Help and Community Help.

Now that youve all had a chance to use the new Community Help system, please take a few moments and let us know what you think.
The best way is to fill out the survey that is behind the
"Give us feedback" link here.
In case you havent been exercising the new
Community Help system, please give it a spin.
If youd rather just send me a message instead of filling out a survey, go ahead and send me email at kopriva [at] adobe {dot} com.
Im especially interested to know how easy it is for you to find the information that youre looking for and how you feel about F1 taking you to the Community Help and Support page instead of the home page of the After Effects Help document.

The question that most individuals ask is how can a person be sure that it is the good time to perform an alcohol or drug intervention. Some signs can be seen and once one is aware of them, its easier to decide a great time for an intervention. For example, a dependent person that drinks alcohol or does drug on a regular basis might begin changing his or her habits, spend ridiculous quantities of money to continue their dependency, less communication with the people that surround him or her, loss of weight, etc
mukesh
Paid Surveys-Paid Surveys

Please take (another) survey or two. Pretty please?

Please take one or both of the following surveys about tasks that a video editor might do in After Effects. Pretty please? Your doing so will help us to learn what people are having trouble with and how we can make it better.
survey 1
survey 2
You may be experiencing déjà vu right now. Yes, I asked folks to take a survey or two a couple of months ago, too. Now I'm asking again so that I can see if anything has changed. We've been at work all summer to make improvements, and we'd like to know what's working and what isn't.

I've passed Harm's case number on to our highest-level technical support staff, and they're working on it now. On a Friday night. I'm typing this when my wife is waiting for me at a party.
We do care, and we do try to help.
Yes, there are some problems with our support system right now, and we're trying to fix them. Yes, there are problems with our software, and we're trying to fix them.
I'm not as familiar with how things work for Premiere Pro, since I am primarily an After Effects guy. So take what I say as applying to After Effects only, since that's all that I can be 100% certain about.
We read every bug report and feature request and crash report. And we often answer directly (though we can't promise this for every submission).
The After Effects team has some additional channels of communication, too, including my blog and Michael Coleman (the product manager)'s blog, where we talk about bugs and updates and anything else that we think might help. Michael even posted a phone number and time slot for anyone to just call in and talk with the After Effects team.
Finally, many of us do participate on these forums. If you look at the After Effects forum, you'll see that two of the top three contributors are Adobe employees. We can't be there all the time, and we can't answer every question, but we do try to keep an eye out.
So, please don't conclude that Adobe is one big uncaring monolith. We are trying to help you. We aren't perfect at it, and some areas need more improvement than others, but I hope that you see that we're trying.
What does this mean for you? Please read this post and give us feedback through these channels.

Please take a survey or two. They're small. Pretty please?

Please take one or both of the following surveys about tasks that video editors might do in After Effects. Pretty please? Your doing so will help us to learn what people are having trouble with and how we can make it better.
survey 1
survey 2

I've passed Harm's case number on to our highest-level technical support staff, and they're working on it now. On a Friday night. I'm typing this when my wife is waiting for me at a party.
We do care, and we do try to help.
Yes, there are some problems with our support system right now, and we're trying to fix them. Yes, there are problems with our software, and we're trying to fix them.
I'm not as familiar with how things work for Premiere Pro, since I am primarily an After Effects guy. So take what I say as applying to After Effects only, since that's all that I can be 100% certain about.
We read every bug report and feature request and crash report. And we often answer directly (though we can't promise this for every submission).
The After Effects team has some additional channels of communication, too, including my blog and Michael Coleman (the product manager)'s blog, where we talk about bugs and updates and anything else that we think might help. Michael even posted a phone number and time slot for anyone to just call in and talk with the After Effects team.
Finally, many of us do participate on these forums. If you look at the After Effects forum, you'll see that two of the top three contributors are Adobe employees. We can't be there all the time, and we can't answer every question, but we do try to keep an eye out.
So, please don't conclude that Adobe is one big uncaring monolith. We are trying to help you. We aren't perfect at it, and some areas need more improvement than others, but I hope that you see that we're trying.
What does this mean for you? Please read this post and give us feedback through these channels.

Please take this very short Audition survey

Hi folks,
As we work on the next version of Audition, we'd love to get feedback on what you want from the application. I hope we can count on you to take part in several short, focused surveys in the coming months.
Right now, we'd like to find out which audio effects in Audition are the most popular. This includes both the built-in effects as well as 3rd-party VST effects you may be using. Please take a moment to fill out this short (2 questions) survey:
http://bit.ly/TqCui
For 3rd-party effects, please be sure to include the name of the plug-in along with the company that created it.
Also, if there are effects that you would like to see added to the next version of Audition, please post a reply here and include some details about it. (e.g. type of effect, where you would use it, etc..)
Thanks for your help!
Durin
PS - This survey data will be used for internal product planning purposes only and will not be shared publicly.

I used Audition 2.0 a lot when it came with CS3. Now we have CS4 and I miss Audition.
I struggled with the multi-track engine a lot. If I had to do some crossfading, it allmost never sounded right, so I use premiere to do that. Much faster in my case. I couldn't understand the engine without reading the book and in real life I have no time to read manuals, sorry. (Adobe books are bad anyway, there is no explanation where you can find certain settings, only that you have to use them. And they don't show you in a logical way how to do things.)
I also hate the Audition / Soundbooth way of navigating over a sample. Far too fiddly, I always lose track of the spot I am focussing at. Please learn from Soundforge, the have a perfect way of navigating through a sample window.
So, how can I miss Audition then? The Izotope multiband compressor. I really need that. Never heard anything better. And the hard limiting as shown in the tutorial by Total training is very good. It is strange and fiddly that you have to try it several times, to find out if you don't go over a certain percentage. However weird that you can not just type in how much percentage you want, the end result is very good. The pitch shifter and retimer is also something I need but Soundbooth has an easier one and does sometimes sounds better.
Soundbooth has the handy clip tool for removing the end and the beginning of a sample. That sould become standard, like the drag fading tool which is also handy.
The timestrechting/pitch shifting in soundbooth is easier than in Audition and sometimes it is better sounding. Only one thing is very annoying. You can not see the time in videoframes but only in audio notation (milliseconds or whatever). So the time I type in, never corresponds to the premiere track. I have to try several times by trial and error. I just create a fake track with the new length in premiere. Export that into Soundbooth. Measure that time. Fill in that time in the sample that needs to be stretched in Soundbooth.
Soundbooth fails in its multiband compressor. It's useless for it sounds horrible. Also the maximizing and the hard limiting fails in many ways. I never use it because it enhances cuts and partial level adjustments in terrible ways. It also seems to distort with these tools very fast in weird ways. It's also not nice, having an auto hard limit when you keep maximizing. If you forget you maximized, you end up with junk.
All seperate premiere tracks should be able to fly over to Audition, in the same multitrack representation and then you should be able to edit them and put automatic copies back into premiere with one click. Then you would be doing something good for the world.

Please Take the LightSwitch/Cloud Business App Developer Survey!

The LightSwitch team wants to hear from developers building LightSwitch applications or Cloud Business Apps! Please take a few minutes to complete the short survey that the team has composed.
We really appreciate your feedback!
http://aka.ms/CBA-Usage-Survey
David Kidder | Senior SDET | Microsoft | LightSwitch

Hi Dave,
you seem to be the only one who tries to communicate with us which is great:-). I think it doesnt make much sense to ask if we develop any new apps in Lightswitch. You should probaby ask something like "would LS be a tool of your choice for a new project
if LS and mainly SL was actively developed and supported?". And my answer would be YES, YES, YES, definitely YES, because LightSwitch (I mean it's SL client) is by far the most productive tool I've ever used. For HTML development there are other tools
and frameworks, more mature and more flexible and most of them are for free. To be honest, LS HTML client is (compared to the SL one) just a bad joke - doesn't expose computed properties, default values, localization is poor...(just few main reasons) but the
main reason why I actually bought LS was that I wanted to get out of that HTML+JS+CSS+bunchofothertechnologies messy hell. Instead of it LS offered a consistent environment with ONE language of my choice (no matter if VB or C# - both are great
anyway). So I didnt hesitate and put my money and effort into it.
Well, from the current point of view it was the worst decision I've ever made in my professional life.
Best regards
Pavel

Please take a look at this. Attempting to make a professional brochure/bound 5-page presentation.

Please take a look at this template I made for a Statement of Qualifications pamphlet.
Here is a link to google drive. I made this template from scratch in Photoshop CS6.
SOQ Page_Blank(no lettering).pdf - Google Drive
What I am curious about, is that some of the lettering often looks blurry, although the page is 500pixels per inch 8.5x11, 76MB .psd file. What can I do about that?
Also, I want to make it easy to write and edit the actual content that will go onto the page. Not all of us here have photoshop to edit the lettering. Is there a way I can export this to word so they can edit the content whenever? Are there better options (programs) to help me design this template? I am guessing I am somewhat pushing photoshops limit as to making a bound 5-page presentation. I am stuck and would like this to be easier. All suggestions for both of my questions as well as overall action toward making this would be great.
Here is an example of a SOQ Pamphlet that I have been using as reference. In my eyes the design is perfect!
http://www.ch2m.com/corporate/markets/environmental/conferences/setac-2013/assets/CH2M-HIL L-land-conservation-restoratio…
Any help is great,
Thanks,
Adam

Since photoshop can not do pages, your on the right track by using pdf format. Since it can do pages, but really requires acrobat pro to bind the pages together.
Your best bet is InDesign then Illustrator would be the next option. Each of these can do multi page documents.
There is absolutely no reason to use 500px/inch for the resolution anything between 150 and 300 would suffice leaning towards 300ppi.
If the text is blurred a few things that can cause that, 1) anti-aliasing 2) document was created as a low resolution then upsampled 3) text is rasterized 4) document is rasterized.

Can you please take a look at my TM Buddy log and opine on what the problem is?

Pondini,
Can you please take a look at my TM Buddy log and opine on what the problem is? I'm stuck in the "Preparing Backup" phase for what must be hours now. My last successful backup was this morning at 7:16 am. I did do a series of Software Update this morning, one of which, a security update I believe, required a restart.
I'm confused as to what the issue is, and how to get everything back to "it just works".
Many thanks in advance.
Starting standard backup
Backing up to: /Volumes/JDub's Drop Zone/Backups.backupdb
Error: (5) getxattr for key:com.apple.backupd.SnapshotState path:/Volumes/JDub's Drop Zone/Backups.backupdb/Jason Wisniowski‚Äôs iMac/2013-05-30-002104
Error: (5) getxattr for key:com.apple.backupd.SnapshotContainer path:/Volumes/JDub's Drop Zone/Backups.backupdb/Jason Wisniowski‚Äôs iMac/2013-05-30-002104
Error: (5) getxattr for key:com.apple.backupd.SnapshotState path:/Volumes/JDub's Drop Zone/Backups.backupdb/Jason Wisniowski‚Äôs iMac/2013-05-30-002104
Error: (5) getxattr for key:com.apple.backupd.SnapshotContainer path:/Volumes/JDub's Drop Zone/Backups.backupdb/Jason Wisniowski‚Äôs iMac/2013-05-30-002104
Error: (5) getxattr for key:com.apple.backupd.SnapshotState path:/Volumes/JDub's Drop Zone/Backups.backupdb/Jason Wisniowski‚Äôs iMac/2013-05-30-002104
Error: (5) getxattr for key:com.apple.backupd.SnapshotContainer path:/Volumes/JDub's Drop Zone/Backups.backupdb/Jason Wisniowski‚Äôs iMac/2013-05-30-002104
Error: (5) getxattr for key:com.apple.backupd.SnapshotState path:/Volumes/JDub's Drop Zone/Backups.backupdb/Jason Wisniowski‚Äôs iMac/2013-05-30-002104
Error: (5) getxattr for key:com.apple.backupd.SnapshotContainer path:/Volumes/JDub's Drop Zone/Backups.backupdb/Jason Wisniowski‚Äôs iMac/2013-05-30-002104
Error: (5) getxattr for key:com.apple.backupd.SnapshotState path:/Volumes/JDub's Drop Zone/Backups.backupdb/Jason Wisniowski‚Äôs iMac/2013-05-30-002104
Error: (5) getxattr for key:com.apple.backupd.SnapshotContainer path:/Volumes/JDub's Drop Zone/Backups.backupdb/Jason Wisniowski‚Äôs iMac/2013-05-30-002104
Error: (5) getxattr for key:com.apple.backupd.SnapshotState path:/Volumes/JDub's Drop Zone/Backups.backupdb/Jason Wisniowski‚Äôs iMac/2013-05-30-002104
Error: (5) getxattr for key:com.apple.backupd.SnapshotContainer path:/Volumes/JDub's Drop Zone/Backups.backupdb/Jason Wisniowski‚Äôs iMac/2013-05-30-002104
Error: (5) getxattr for key:com.apple.backupd.SnapshotState path:/Volumes/JDub's Drop Zone/Backups.backupdb/Jason Wisniowski‚Äôs iMac/2013-05-30-002104
Error: (5) getxattr for key:com.apple.backupd.SnapshotContainer path:/Volumes/JDub's Drop Zone/Backups.backupdb/Jason Wisniowski‚Äôs iMac/2013-05-30-002104
Error: (5) getxattr for key:com.apple.backupd.SnapshotState path:/Volumes/JDub's Drop Zone/Backups.backupdb/Jason Wisniowski‚Äôs iMac/2013-05-30-002104
Error: (5) getxattr for key:com.apple.backupd.SnapshotContainer path:/Volumes/JDub's Drop Zone/Backups.backupdb/Jason Wisniowski‚Äôs iMac/2013-05-30-002104
Event store UUIDs don't match for volume: Area 420
Event store UUIDs don't match for volume: Macintosh HD
Error: (5) getxattr for key:com.apple.backupd.SnapshotSt

Time Machine can't read some data it needs from your backups (each of those date-stamps is one of your backups).
That's usually a problem with the drive itself, but could be the directory on it. First be sure all plugs are snug and secure, then see if you can repair it, per #A5 in Time Machine - Troubleshooting.
If that doesn't help, post back with the results. Also either tell us what kind of Mac you have, what version of OSX you're running, or post that to your Profile, so it's accessible.
This is unrelated to the original post here, so I'm going to ask the Hosts to split it off into a new thread. Since you've posted in the Lion forum, I'll assume that's what you're running. You should get a notice from them

I bought Iproxify throught app store and it does not work. I contacted the creator but I have not had any answer. What can I do to get my money back? and please take him down.

I bought IPROXIFY throught APP STORE and it does not work. I contacted the creator and he has not answered.
How can I get my money back? and please take him down of your page as we (users) think that we are buying products that worked backed up by MAC.
Looking forward for an answer in order to keep buying in APP Store

This article may clear up some confusion you may have regarding third party developers and Apple.
The Mac App Store Discussion, what is it for?

Dear Verizon, since you ruined my phone, please take it back

Dear Verizon,
I've been using you for mobile service ever since you were Bell Atlantic. I've been a loyal customer and haven't really asked for anything from you other than your usual good data and voice service in exchange for a fair price.
However, you chose to push out an Android 4.3/HTC update which has effectively ruined my phone. There is no legitimate (e.g. not-a-custom-ROM) way to reverse what you've done, so I'd like you to please take the responsibility for this and allow me to return my phone or exchange it for another model. What do I mean by "ruined"?
- The wifi on the phone regularly "forgets" the passphrase to my work and home networks (about every 1 to 24 hours). It also won't stay connected for very long after I re-enter my passphrase.
- The wifi shows that I'm connected to networks that are no longer in range, and haven't been in range for days.
- 4G service is often about as slow as a 28k modem, when it works at all. This is in areas where I've known it to work reliably and speedily before, particularly at home and work.
- You installed more adware on my phone in the form of apps that I will never use and can't remove. (Which, as far as I'm concerned indicates to me that you claim some form of ownership of this device, so I guess if you own it you might as well take it back. It's weird though, because I thought it was mine).
Since I effectively have no (or at best, intermittent) data service of any kind on my phone, I think that it's fair to say that it's been ruined. If I wanted a data-less phone I'd move back to 1996 and get a Palm Pilot. Oh, and I'm still paying for your wonderfully red map of the United States that you feature on your commercials while receiving little of the benefits.
These problems started immediately after the installation of the last software update, and the phone worked reliably and well for all the previous months that I've owned it.
I've tried all sorts of remedies as recommended on various forums and blogs. None of it helps.
Incidentally, I've never been a fan of custom ROMs because they're unsupported by the manufacturer and service provider which could theoretically lead to warranty issues in the future. But when the service provider and manufacturer are the ones making my phone worse instead of better, then I guess there's no harm in installing a ROM. But I'd rather you just allow me to return the phone.
You know what, maybe I'm being a bit harsh. You can take the phone back and fix it. But if you expect me to waste hours troubleshooting a problem that you've caused then you're out of your minds.
Regards,
Scott

how many times have Verizon reps told you to do a factory reset? from what I'm reading that seems to be their solution for every android issue these days.

Anyone using an SSD under Arch? Please post a quick benchmark

I'm considering an SSD for my Linux root and /home. If you're using an SSD under Arch, can you please run a quick benchmark for me and post the results in this thread? You can use hdparm to do a quick read test. Here is an example using my HDD.
# hdparm -Tt /dev/sda
/dev/sda:
Timing cached reads: 14500 MB in 2.00 seconds = 7258.88 MB/sec
Timing buffered disk reads: 368 MB in 3.01 seconds = 122.16 MB/sec
Beyond that, have you noticed any substantial speed ups over an HDD, like launching programs, booting the system, etc.

Perhaps use of IDE-MODE flash devices will provide best answers with the hdparm measure. It does a sequential test which is hardly normal for operating systems.
Usual performance from ide mode flash devices is 45mb/sec but in practice may be a bit less in hdparm. Two ide mode flash drives in raid0 give me less than 90 mb/s. My use is for quick access storage, mostly read-only. When first installed, 90 mb is possible but within a few weeks, it lessens to the mid 80"s even with read-only.
The performance over time lessens if the units are used as SSD and such is normal wear and tear. Many articles cover the subject and the methods used to minimize the effects.
Much is going forward with SSD and expectation is that in a few years they will be in wide use. This remains to be seen!
You may be aware of all so excuse my oops!

Please take a quick InDesign survey

Similar Messages

Maybe you are looking for