Please take this short survey - Inputs on View Designer

Inputs in View Designer :-
Hello Webdynpro developers,
We would really like to get some input from you, please take a short minute and answer just a couple of questions in our little <a href="http://feedback.sap.com/efs/vote?campaign=c14e041f65f804c900f008f7734bd1c5&org=997">survey</a>
Your inputs are highly appreciated.
Thanks,
Raghuvira

Hi Raghuvira,
Its really good to start this thread, so that we could specify the possible enhancements and improvements on View Designer from Design time perspective .
I personally believe replying to the post is more easire than taking the survey so instead of survey here is my reply ,
1. I many a time faced a problem of getting an exception of Object not found while working in developer studio on View Designer
2. If we get a design time preview it would be even helpful as even changing a small text requires deployment
3. All the actions on the UI elements has to be triggered from outline and could not be done from the main View designer
4. Shifting a UI element to adjust its position is very painful ( up/down)
Currently i have these in my mind , will let you know if i get some more
Thanks
Dhawal

Similar Messages

  • Please take this very short Audition survey

    Hi folks,
    As we work on the next version of Audition, we'd love to get feedback on what you want from the application.  I hope we can count on you to take part in several short, focused surveys in the coming months.
    Right now, we'd like to find out which audio effects in Audition are the most popular.  This includes both the built-in effects as well as 3rd-party VST effects you may be using.  Please take a moment to fill out this short (2 questions) survey:
    http://bit.ly/TqCui
    For 3rd-party effects, please be sure to include the name of the plug-in along with the company that created it.
    Also, if there are effects that you would like to see added to the next version of Audition, please post a reply here and include some details about it.  (e.g. type of effect, where you would use it, etc..)
    Thanks for your help!
    Durin
    PS - This survey data will be used for internal product planning purposes only and will not be shared publicly.

    I used Audition 2.0 a lot when it came with CS3. Now we have CS4 and I miss Audition.
    I struggled with the multi-track engine a lot. If I had to do some crossfading, it allmost never sounded right, so I use premiere to do that. Much faster in my case. I couldn't understand the engine without reading the book and in real life I have no time to read manuals, sorry. (Adobe books are bad anyway, there is no explanation where you can find certain settings, only that you have to use them. And they don't show you in a logical way how to do things.)
    I also hate the Audition / Soundbooth way of navigating over a sample. Far too fiddly, I always lose track of the spot I am focussing at. Please learn from Soundforge, the have a perfect way of navigating through a sample window.
    So, how can I miss Audition then? The Izotope multiband compressor. I really need that. Never heard anything better. And the hard limiting as shown in the tutorial by Total training is very good. It is strange and fiddly that you have to try it several times, to find out if you don't go over a certain percentage. However weird that you can not just type in how much percentage you want, the end result is very good. The pitch shifter and retimer is also something I need but Soundbooth has an easier one and does sometimes sounds better.
    Soundbooth has the handy clip tool for removing the end and the beginning of a sample. That sould become standard, like the drag fading tool which is also handy.
    The timestrechting/pitch shifting in soundbooth is easier than in Audition and sometimes it is better sounding. Only one thing is very annoying. You can not see the time in videoframes but only in audio notation (milliseconds or whatever). So the time I type in, never corresponds to the premiere track. I have to try several times by trial and error. I just create a fake track with the new length in premiere. Export that into Soundbooth. Measure that time. Fill in that time in the sample that needs to be stretched in Soundbooth.
    Soundbooth fails in its multiband compressor. It's useless for it sounds horrible. Also the maximizing and the hard limiting fails in many ways. I never use it because it enhances cuts and partial level adjustments in terrible ways. It also seems to distort with these tools very fast in weird ways. It's also not nice, having an auto hard limit when you keep maximizing. If you forget you maximized, you end up with junk.
    All seperate premiere tracks should be able to fly over to Audition, in the same multitrack representation and then you should be able to edit them and put automatic copies back into premiere with one click. Then you would be doing something good for the world.

  • Sun VDI 3.1 EA - Please take the EA survey

    Hi,
    We've released the VDI 3.1 EA last week. The 3.1 release adds a number of interesting new features. You find a brief overview here. And the [VDI 3.1 documentation|http://wikis.sun.com/display/VDI3dot1/Home] has much more detail about the new functionality.
    I'd like to encourage you to take the [EA survey|http://www.surveymonkey.com/s.aspx?sm=%2BOaIS5LgthO0B125F5%2BVLg%3D%3D]. It just takes 5 minutes. Your feedback is really appreciated in the same way as you participation in the VDI forum.
    Thank you,
    Dirk

    Hi,
    We've released the VDI 3.1 EA last week. The 3.1 release adds a number of interesting new features. You find a brief overview here. And the [VDI 3.1 documentation|http://wikis.sun.com/display/VDI3dot1/Home] has much more detail about the new functionality.
    I'd like to encourage you to take the [EA survey|http://www.surveymonkey.com/s.aspx?sm=%2BOaIS5LgthO0B125F5%2BVLg%3D%3D]. It just takes 5 minutes. Your feedback is really appreciated in the same way as you participation in the VDI forum.
    Thank you,
    Dirk

  • Take this TES survey and win a chance for a $25 starbucks card

    https://www.cisco.vovici.com/se.ashx?s=2C85931E3229C49C

    Can't take the survey, sorry:
    Forbidden File or Application

  • Can you create the Title effect in Daybreakers, adobe after effects cs4,,please take this one as cha

    im currently studying Adobe After Effects CS4, and i found the title of DAYBREAKER(2009)movie a very interesting effect to create, i hope you can give me tutorials on how to do that..please! more power, NOTE: im using adobe after effects cs4

    From what I saw on the trailer for this film the titles are a modified version of George Peolvoy's Flowing Title tutorial posted on Creative Cow about 10 years ago. You'll find the tutorial here.
    The glass effect on the type can be duplicated using layer effects in Photoshop and / or then applying those layer effects to your type layer directly in AE. You'll find a bunch of those tutorials by doing a simple Google search for Glass Text Photoshop.
    There is no one click, one plug-in solution, but if you integrate the layer effects, a displacement map, some compound blur, and a little position keyframing + motion blur you should be able to duplicate the effect exactly. George's tutorial should get you started. If I remember right the project files were for AE 4.1 so they probably won't open in CS4.
    Good luck
    Daybreaker Trailer

  • HT3702 I was charged $3.99 this month and last month for something on iTunes that I did NOT order. Please take this off my bill. Please and Thank You

    Please  help me fingure why I'm being charged $3.99 each month

    We are all itunes users just like you.
    We can take nothing off of your bill.
    Contact itunes support

  • HT5858 IT WOULD BE REALLY HELPFULL IF CONTROL CENTER HAD A BUTTON TO TURN ON CELLULAR DATA. Could you(APPLE) please take this in consideration for the next update?

    What do you guys think?

    Logically, because unlike you I do not keep my cellular data on at all times as I do not have an unlimited data plan. I only turn on cellular data when I am on the go and I do not have access to a wifi network. Therefore my need for a button in control center that turns on cellular data. And this would be very usefull to other iPhone users outside the US and Canada, where unlimited cellular data plans are not so affordable.

  • HT1349 The new os make the ipad reset every 30 mins, please take this in consideration

    Reset product,
    The new os is good, but after 30 to 40 mins is shutdown the ipad n reset itself

    You may want to backup and setup as new.
    Settings>General>Reset>Erase all contents and settings

  • Please take a quick InDesign survey

    Please take the following surveys about page numbering in InDesign. Pretty please? Your doing so will help us to learn what people are having trouble with and how we can make it better.
    Click here to take the survey

    Tanks,
    Very helpful example.
    However...
    When I started to build my program I used the "multiple channels" DAQmx read block, And configured a voltage task that I used for all my sensors. To scale the measured signal into correct value (in for example Newton to show on the screen) a number of calculations were applied, depending on selected sensor.
    This means that I have to do the calibration of the sensors outside of Labview. Until I found the possibility to calibrate each task (individually) in MAX... This is much easier because I don't have to bother about all the calibration values and compensations that I used before. This is the reason why I want to give each sensor its own task. And when each sensor is given its own task, and I always need to measure two sensors (two channels), this problem arise.
    I can se 2 possible solutions... maybe.
    1. Create a scale in MAX for each sensor instead, then I should be able to use the example in the link above  --  think this would work, but I need to find the slope and offset value on my own as before.
    2. If there is a way to read from global viritual channels instead of tasks, and if it is possible to connect 2 viritual channels independent  to he task during operation  --  Probably not.
    Maybe a little confuising explanation...

  • Bl00dy "Short Survey" popup

    The short survey popup is infuriating me.
    Every time I return to the list of posts within one of the sections, the d*mned thing covers half my screen again. I already have it open on screen ready to fill in, but is it intelligent enough to spot that? Nope. If I say no, it pops up again next time I navigate.
    Please can you stop the thing, it is a pain in the R's

    pottyperson wrote:
    Keith_Beddoe wrote:Otherwise, if you are using Windows, you can add an entry in the "hosts" file, to block that domain.
    That certainly works, but feedback for a mod when they've helped you out is managed by the same outfit so you then have to use another device to leave feedback. (That's just an aside as StuartH is on this thread and it will help explain the problem I had with feedback a few weeks ago. KB will remember helping me with the hosts file when scripts on the forum were bothering me.)
    As the op has said, this "short survey" can be a problem. I use IE 11 and manually clear internet history and cookies etc each time I exit. IE 11 should keep cookies from favourite websites, but unfortunately ecustomer opinions is not one of my favourite websites.  You can block the survey by going to (IE 11) > tools > internet options > security > restricted websites > (enter name of the restricted website).
    It's a sledgehammer approach but it works, but it also blocks that survey for all other sites. (However there is a section in the BT Communities named "Guidance and Ideas. Isn't that sufficient in itself?)
    It's unfortunate for those of us who need to view in larger text, as it's difficult to close the survey panel, which is just larger than the viewable screen.
    It will be interesting to see StaurtH's conclusions.

  • View designer in Sneak Preview 2004s Abap

    Hi to all,
    just a short question.
    The view designer with all UI elements (standard simple, standard complex & Standard container category) is avaiable in Sneak Preview NW 2004s Abap ?
    If not (because i cannot find it), can i install it as a separated package (if yes,where i can download it)? Or the latest version of the NW Sneak preview 2004s (SP8)already contains it ??
    Thx a lot
    Andrea

    Hi Rich,
    thx a lot for your quick reply.The problem is i cannot find it.
    I run SE80 trx, i create a simple WD application and a view. I select the view, then and i have three "frames" (from the left):
    - The standard SE80 tree
    - In the "layout" tab of the WD application, i have the browser preview (but it shows the standard IE error page) and a window with the UI of the windows, designed in a tree (rootuielementcontainer).
    But nothing about view designer.
    I have sapgui 6.40 patch lev.20
    Thx a lot
    Andrea

  • Please take Adobe's quick NLE User Survey

    Please take our NLE User Survey – you could win $100 AMEX Gift Card.
    We want to hear from you!
    Adobe is seeking your input to help design the best products for post-production workflows, and we greatly value your input as we develop our video applications.  Please fill out our quick 10-12 minute survey, and as a thank you, you will be entered to win a $100 gift card!
    Go to survey >
    http://www.surveymonkey.com/s.aspx?sm=Nk7Cf7W1D_2fMncDvby4hvXw_3d_3d
    thank you,
    Anita Engelman
    (Premiere Pro Marketing Manager)

    If you have not done so already... go take this survey
    I did... and every place in the survey where there was a block for text entry, I typed in
    Windows 7 Compatibility
    Tell Adobe NOW so they know you care about the next operating system!

  • Please take Adobe's quick post-production survey

    Please take our post-production survey – you could win $100 AMEX Gift Card.
    We want to hear from you!
    Adobe is seeking your input to help design the best products for post-production workflows, and we greatly value your input as we develop our video applications.  Please fill out our quick 10-12 minute survey, and as a thank you, you will be entered to win a $100 gift card!
    Go to survey >
    http://www.surveymonkey.com/s.aspx?sm=Nk7Cf7W1D_2fMncDvby4hvXw_3d_3d
    thank you,
    Anita Engelman
    (Premiere Pro Marketing Manager)

    If you have not done so already... go take this survey
    I did... and every place in the survey where there was a block for text entry, I typed in
    Windows 7 Compatibility
    Tell Adobe NOW so they know you care about the next operating system!

  • Please Take the LightSwitch/Cloud Business App Developer Survey!

    The LightSwitch team wants to hear from developers building LightSwitch applications or Cloud Business Apps!  Please take a few minutes to complete the short survey that the team has composed. 
    We really appreciate your feedback!
    http://aka.ms/CBA-Usage-Survey
    David Kidder | Senior SDET | Microsoft | LightSwitch

    Hi Dave,
    you seem to be the only one who tries to communicate with us which is great:-). I think it doesnt make much sense to ask if we develop any new apps in Lightswitch. You should probaby ask something like "would LS be a tool of your choice for a new project
    if LS and mainly SL was actively developed and supported?". And my answer would be YES, YES, YES, definitely YES, because LightSwitch (I mean it's SL client) is by far the most productive tool I've ever used. For HTML development there are other tools
    and frameworks, more mature and more flexible and most of them are for free. To be honest, LS HTML client is (compared to the SL one) just a bad joke - doesn't expose computed properties, default values, localization is poor...(just few main reasons) but the
    main reason why I actually bought LS was that I wanted to get out of that HTML+JS+CSS+bunchofothertechnologies messy hell. Instead of it LS offered a consistent environment with ONE language of my choice (no matter if VB or C# - both are great
    anyway). So I didnt hesitate and put my money and effort into it.
    Well, from the current point of view it was the worst decision I've ever made in my professional life.
    Best regards
    Pavel

  • Please take (another) survey or two. Pretty please?

    Please take one or both of the following surveys about tasks that a video editor might do in After Effects. Pretty please? Your doing so will help us to learn what people are having trouble with and how we can make it better.
    survey 1
    survey 2
    You may be experiencing déjà vu right now. Yes, I asked folks to take a survey or two a couple of months ago, too.  Now I'm asking again so that I can see if anything has changed. We've been at work all summer to make improvements, and we'd like to know what's working and what isn't.

    I've passed Harm's case number on to our highest-level technical support staff, and they're working on it now. On a Friday night. I'm typing this when my wife is waiting for me at a party.
    We do care, and we do try to help.
    Yes, there are some problems with our support system right now, and we're trying to fix them. Yes, there are problems with our software, and we're trying to fix them.
    I'm not as familiar with how things work for Premiere Pro, since I am primarily an After Effects guy. So take what I say as applying to After Effects only, since that's all that I can be 100% certain about.
    We read every bug report and feature request and crash report. And we often answer directly (though we can't promise this for every submission).
    The After Effects team has some additional channels of communication, too, including my blog and Michael Coleman (the product manager)'s blog, where we talk about bugs and updates and anything else that we think might help. Michael even posted a phone number and time slot for anyone to just call in and talk with the After Effects team.
    Finally, many of us do participate on these forums. If you look at the After Effects forum, you'll see that two of the top three contributors are Adobe employees. We can't be there all the time, and we can't answer every question, but we do try to keep an eye out.
    So, please don't conclude that Adobe is one big uncaring monolith. We are trying to help you. We aren't perfect at it, and some areas need more improvement than others, but I hope that you see that we're trying.
    What does this mean for you? Please read this post and give us feedback through these channels.

Maybe you are looking for