Please tell me all the sound specs i need to set up in logic x to have success recording; my output channel does not output most of the time; i use analog lab as well

please help me set up all the sound specs/preferences both hardware and software wise for logic x on mac book pro...i am unable to hear any audio playback when i record a track...no activity in output channel

itunes can share music over the network without an internet connection, but you will need a computer running itunes powered on to be able to share it (setup in itunes by going to file (windows) or itunes (mac) > preferences > sharing)
if you just want to setup a network attached storage drive for the network that holds all the music that would be done independently of itunes and you would need a compatible NAS drive (I don't believe the airport is technically a nas drive but you could ask that section of support communities as well https://discussions.apple.com/community/wireless/airport)

Similar Messages

Re: Satellite Pro A300 - DVD drawer does not open most of the time

I have a Satellite Pro A300-1NH laptop. The DVD drawer does not open most of the time. Occasionally it does, but most of the time it does not.
Sometimes if I manage to get a DVD/CD into the drawer to burn something to, the burn works.
Most of the time the computer does not recognise that there is a disc there, and then I can't open the drawer again to get it out.
Can anyone tell a novice what I need to do to sort this out please?

Have you noticed this when you try to open drawer using eject button in the drawer itself?
Almost every player has integrated eject button. Can the drawer be opened using this eject button?

HT201401 My iphone 5 volumn down button does not work most of the time. it feels fine. in an otterbox defender. this is my second iphone that it is doing the same thing.

i have a iphone 5. the volume button going down only does not work. this is my second phone with the same problem. i have had otterboxes for both phones.

Does not work even with the case off. I formatted and rebooted, reset, called apple and sent the last one back. It was free but this is getting old. I have had all iPhones and this is the only one I have had issues.

After downloading album covers (some not found) itunes does not show most of the covers.

After downloading album covers into iTunes iTunes does not show most of the covers. It showas blank white boxes except for those where "cover not found" (music notes).
You have any idea how this happens, perhaps with location of the files.

iTunes refuses to play/read file, it cannot recognizes headers, or recognizes those as corrupt, but giving no error messages. The problem is the stored artwork(s) on your music files. To correct this, select the files that are corrupted/cannot be played on iTunes&iPod, click "Convert ID3 Tags...", then select v1.1 from the dropdown box (first, try this on a few to see that my solution is working).
By doing so, iTunes replaces headers, but your ID3 tags will not be changed (I assume you are using ID3 v2.4), nor you'll lose any info or anything else. This works as a hotfix for those files. If you try to replace headers via another program, your information will be truncated, and any artwork stored will be deleted. So I recommend this one.
You'll see that iTunes cannot play most of the files that has artwork(s) stored in them. New version hasn't fixed this problem, and it has risen with iTunes 8.2.x. If it's going to take long, I suggest you should go back to 8.1.x.
With best regards,
lyravega, goekhan.

CS6 & OSX 10.6.8 - saving files directly to the server does not work (most of the time)

Hi there,
we just switched from OSX 10.5.8 to 10.6.8
OSX was installed on a new partition of the harddisk
Then installed CS 5
Then installed CS 6 via (adobe creative cloud)
With CS6 we got also the problem with saving files to the server (program error)
It happens mostly with photoshop, sometimes with Illustrator.
I read a lot of posting regarding the same problem but didn´t found a real solution yet.
I am also wondering that there seems to be no solution for this now, because most of the posting i read are 1 year old.
Working locally is not really an acceptable workaround for us or anyone who needs to work with Creative Suite in a professional way.
Our MACs…
MAC Pro 4.1
OSX 10.6.8
Virtualized Server Solaris 10 with Helios UB+
connected to server with afp://Server IP Adress
Adobe Software
CS 5 & CS 6
Here´s some additional information from the osx system profiler:
Hardware-Übersicht:
Modellname:          Mac Pro
Modell-Identifizierung:          MacPro4,1
Prozessortyp:          Quad-Core Intel Xeon
Prozessorgeschwindigkeit:          2,26 GHz
Anzahl der Prozessoren:          2
Gesamtzahl der Kerne:          8
L2-Cache (pro Kern):          256 KB
L3-Cache (pro Prozessor):          8 MB
Speicher:          10 GB
Geschwindigkeit für Prozessorverbindungstyp:          5.86 GT/s
Boot-ROM-Version:          MP41.0081.B07
SMC-Version (System):          1.39f5
SMC-Version (Prozessormodul):          1.39f5
Seriennummer (System):          CK9120Z98Q0
Seriennummer (Prozessormodul):          J590807P51LUC
Hardware-UUID:          30149BDB-582E-583A-B776-59A6DEA2A32C
Ethernet 1:
Typ:          Ethernet
Hardware:          Ethernet
BSD-Gerätename:          en0
IPv4-Adressen:          192.9.200.120
IPv4:
Adressen:          192.9.200.120
Konfigurationsmethode:          Manuell
Schnittstellen-Name:          en0
Netzwerksignatur:          IPv4.Router=192.9.200.203;IPv4.RouterHardwareAddress=00:30:48:ba:70:30
Router:          192.9.200.203
Teilnetzmasken:          255.255.255.0
DNS:
Such-Domains:          floramedia.int
Serveradressen:          192.9.200.7, 194.25.0.68
Ethernet:
MAC-Adresse:          00:23:df:df:96:e1
Medienoptionen:          Voll-Duplex
Medien-Untertyp:          1000baseT
Proxies:
Ausnahmeliste:          *.local, 169.254/16
Passiver FTP-Modus:          Ja
Reihenfolge der Dienste:          0
Überblick über die Systemsoftware:
Systemversion:          Mac OS X 10.6.8 (10K549)
Kernel-Version:          Darwin 10.8.0
Startvolume:          MAC_OSX_10_6_x_SNOW-LEOPARD
Startmodus:          Normal
Gerätename:          Freelancers Mac Pro 10.6.8
Benutzername:          DENNIS (freelancer)
Sicherer virtueller Speicher:          Nicht aktiviert
64-Bit-Kernel and -Erweiterungen:          Nein
Zeit seit dem Start:          8:09

Hi franverdi-
It sounds like you've run into issues from the upgrade. I've found a Support article that helps with issues of not being able to connect after an upgrade:
[[Cannot connect after upgrading Firefox]]
I hope that helps!

HT1386 After the recent iTunes my PC recognizes that I have connected my iPhone, but iTunes does not. I tried the trouble shooter; it said device not recognized. I clicked the help button as instructed and get iPod not recognized instructions. What for iP

I have not been able to sync my iPhone 5s on my PC sincethe most recent update to iTunes. My computer showsthe iPhone as connected, but iTunes does not recognize it. I tried the trouble shooter and got device not recognized. I clicked the help button beside the failed test and get iPod instructions. How do I get iPod instructions for work for an iPhone? Better, how can I get this to show iPhone instructions? (On my other computer, I had to uninstall every Apple product to get the new iTunes to work.)

You wrote: (On my other computer, I had to uninstall every Apple product to get the new iTunes to work.)
You may have to do this on this computer as well. http://support.apple.com/kb/ts5376

Cisco DCNM 6.2 does not support most of the switches in my network

Hi All,
I have just installed Cisco DCNM 6.2. I have run a discovery using SNMP v1 my core switch which is a 3750G stack. DCNM discovers all my switches but does not support the 2960 and 3750 switches. The only switches I can select to manage and are supported are a 4510 and 3550. I have also run another discovery using SNMPv3 on a different core switch (Nexus 3K) at one of our remote sites. DCNM found all the other 2960s in that network but I can only select the two Nexus switches in the core to manage. What do I need to do to be able to manage all my switches switch?
Thank you in advance.

Hello,
DCNM is meant for data centre network management and as such only supports the MDS, Nexus and the 6500 series switches, see the RN under supported Cisco platforms and software:
http://www.cisco.com/c/en/us/td/docs/switches/datacenter/sw/6_x/dcnm/release/notes/dcnm_6_2_5a_relnotes.html#pgfId-314209
For the discovery issue DCNM should 'see' the other devices so you need to have a look at your SNMP and CDP (used for neighbour discovery on a per hop basis) settings on each of the devices.
For an software package to manage LAN/WAN environments you really need to be looking at Cisco Prime LMS.
We are going through the same problem, it would be nice to be able to manage the DC and LAN from DCNM.
Regards
Daniel Hunter

When the about:config setting for swipe are changed to allow changing tabs with swipe it does not repond and performs the default back and forward in browsing history action on the selected window instead of switching tabs. How do I get it to work?

In about:config, the values I changed to for the preference name browser.gesture.swipe.left was Browser:PrevTab and for browser.gesture.swipe.right was Browser:NextTab.
I have the latest synaptics touch pad on my laptop and it supports three touch swipe on windows pcs and on firefox. The about:config setting seem to be specific for MACs and so does not responds to windows changes.

Hi,
I suggest you try the steps in this thread for test:
Disable Suggested Sites does not work.
http://answers.microsoft.com/en-us/ie/forum/ie9-windows_7/disable-suggested-sites-does-not-work/4ba064b1-1c6e-43f1-939e-2db1d335b2ef
Regards,
Vincent Wang
TechNet Community Support

My home button does not respond most of the time. Is this a hardware failure?

I've had quite a bit of difficulty with getting my home button to respond. Sometimes, the only way to get back to the home screen is to do a hard reset. I constantly close any open apps, thinking that this might be the problem (memory issue).
Hoping you can help!
Thanks!

See:
fix for Home button
Fix a broken, unresponsive or sticky iPhone Home Button

Trying to set up Express to extend network. Had problems and now it does not show up in the Utility window? How can I overcome this?

It just blinks Yellow but will not show up in list so I can work with it. What do I do? Is it now a brick?

On the AirPort Extreme setup.....I assume that you did enter a check mark in the box next to "Allow this network to be extended"
Otherwise, the following instructions will be of no value.
Temporarily, connect the Ethenret cable from your computer to the AirPort Express (AX) and power up the AX in the same room or close proximity to the AirPort Extreme.
Open AirPort Utility, select the AX, and click Manual Setup
Click the Base Station tab just below the row of icons to name the AX, assign a device password (write that down) and adjust Time Zone settings
Click the Wireless tab next to the Base Station tab. Settings should look like this:
Wireless Mode = Extend a wireless network
Wireless Network Name = Same name as the AirPort Extreme wireless network
Check mark entered next to Allow Wireles Clients
Wireless Security = Same setting as the AirPort Exreme network
Wireless Password = Same password as the AirPort Extreme network
Confirm Password
Click Update
As soon as you see the message that the settings have been stored, close AirPort Utility and disconnect the Ethernet cable
Wait 40-45 seconds for the AX to restart and you should have a green light
Locate the AX approximately 1/2 the distance from the AirPort Extreme to the area that needs more wireless coverage and power it up
The AX should now be providing more wireless coverage

Can anyone tell me what I need to set up iPhone 4? I have my email address and password but not user ID. What is this?

Do I need a user ID to set up a new iPhone. I have email address and password but not sure what the user ID is?

User ID is an Apple ID you use to buy paid or free stuff from the Apple Store, iTunes Store...
It is in no way essential to use your iPhone, but it is indeed needed to purchase/download free or paid Apps, songs, books and so on.
You can set-up a free Apple ID from your phone, or on → https://appleid.apple.com
☺

Please help me out with this error:Logical dimension table D_TARGET has a source D_TARGET that does not join to any fact source.

I get the folowing error when I run the global consistency check
WARNINGS:
Business Model DAC_Measures:
[39008] Logical dimension table D_TARGET has a source D_TARGET that does not join to any fact source.
Can someone help me out please?
Thank you!

It seems your dimension is not joined to any facts. Did you check your BMM/physical joins?

I have an iPod Nano that is synced to my mac, but it is sent in for the battery issue. Anyway, I have bought a 2nd gerneration Ipod touch and I want to now sync it to my mac, but it does not show up in the left menu bar. Please help. Thanks All!

I have an iPod Nano that is synced to my mac, but it is sent in for the battery issue. Anyway, I have bought a 2nd gerneration Ipod touch and I want to now sync it to my mac, but it does not show up in the left menu bar. Please help. Thanks All!

http://support.apple.com/kb/TS1591
There have been some problems accessing pages on the Apple web site. If the hyperlink gives you a "We're sorry" message, try again.

How many certificate in needed for push notification please tell me all steps ?

how many certificate in needed for push notification please tell me all steps ?

Your System Details shows;
Installed Plug-ins
Garmin Communicator Plug-In 4.0.4.0
Garmin Communicator Plug-In 4.0.3.0
Having more than one version of a program may cause issues.

Since yesterday I have been unable to use FaceTime across all my Apple devices: Iphone 5s, MAC Notebook, and Ipad Mini. It does not connect nor make the ringing sound. Why is this and how can it be fixed?

since yesterday I have been unable to use FaceTime across all my Apple devices: Iphone 5s, MAC Notebook, and Ipad Mini. It does not connect nor make the ringing sound. Why is this and how can it be fixed?

I am haveing same problem canot find itunes.msi

Please tell me all the sound specs i need to set up in logic x to have success recording; my output channel does not output most of the time; i use analog lab as well

Similar Messages

Maybe you are looking for